Image Sequence / MSO reload on screen turn

Hi All
I had this new issue. I think it have been approach earlier by can't find it in the Forum.
When you embed an image sequence or MSO, and you turn your tablets screen (horizontal/vertical), how to do to avoid the page to reload totally (and play from the begining the Image Sequence / or MSO go back to State 1) ?
Thanks

Hi Bob
it has the same name. Maybe it's because it was done with the an old version of pre release.
It is also annoying that the viewer app keep in memory the last page where we stop looking at. The viewer doesn't reload the magazine with stacks starting from page 0. I've seen their is a trick.... but not really practical
Thanks

Similar Messages

Is there a way to continue an image sequence after a full screen video has played?

Any help with this would be really appreciated

Assuming the video is auto-play, you can put the video in the first state of an MSO, and then put the image sequence in the second state of the MSO. Then set the MSO to auto-change with a duration that equals the length of the video. This works if your video is shorter than the max auto-change duration we allow.
Having said that, this is a pretty bad idea from a performance perspective if your video and MSO are the full size of the screen. You'll force the app to load a ton of content into memory and performance will suffer.
Neil

My iMac turns on and about 10 mins later it glitches and freezes and then the screen turns blue/green/white

My iMac turns on fine, but about 10 minutes later I can't use the mouse as the whole thing freezes. Sometimes it continues to move the mouse for a while but then glitches the screen (see first image). After that my screen turns blue/green/white and even purple as a solid colour (second image - changes to a different colour). I'm wondering what the problem is and can I fix it myself?

I have a similar iMac.
1. Be sure you have 4 GB of RAM.
2. Create a new USER wih Admin Rights
3. Don't add anything to the start up sequence.
4. Update all your apps. This is a big problem. Do it.
5. Use Font Book and verify your fonts. Delete any broken fonts.
6. Download and install Applejack. If you have to force a restart, press and hold command s. A black screen will appear. Finally it will say something about Applejack. Type applejack and run #1 and #2. Restart.
Don't run Applejack outside of safe mode. (Command s)
Come back and let us know how it is working.
;-D
DL Applejack: https://www.macupdate.com/app/mac/15667/applejack

Can i set up automator to take image sequences through to compressed quick times for upload?

Hi All you smart people,
I wonder if any of you know how to set up a workflow in automator that takes image sequences, colorcorrects them and then turns them into .mov files.
Thanks in advance for your input,
Susanna

That's definitely the best option to do everything via the task sequence deployment.
Also, there are script available in the community to add or remove a device from a collection, see for example:
http://sccmfaq.wordpress.com/2013/05/20/sccm-2012-sp1-remove-client-from-collection-after-osd/
Keep in mind that if you want to use a script like that during the task sequence that the device running the task sequence (and by that the script) requires specific rights within ConfigMgr.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

The image came up on my screen saying that I need to connect my iPod to iTunes, but I have a passcode, so it won't allow me to. And I want to try and turn it off, but my touch screen doesn't seem to be working either. HELP!

The image came up on my screen saying that I need to connect my iPod to iTunes, but I have a passcode, so it won't allow me to. And I want to try and turn it off, but my touch screen doesn't seem to be working either, so I can't even turn it off since you need to "slide to power off." HELP! I'm leaving on Thursday morning for six and a half weeks, and I absolutely need my iPod with me. I was just at the Apple store today for problems I was having with ANOTHER product, and I don't really want to drive all the way out to where my nearest store is (which is not very near) if I can figure this out at home. My iPod was working totally fine earlier today and last night, so I don't know what happened! Please, please, PLEASE HELP!

Now it's allowing me to reboot (hold down power button and home button and restart), but every time it just comes up to the same thing: the connect to iTunes page. Which is not possible. And I refuse to restore my iPod. PLEASE HELP.

Can Media Encoder take an image sequence in the watch folder and turn it into a video file?

I'm using OSX and Media Encoder 6 (from premier 6) and can't figure out how to make the watch folder take a .jpeg or .dpi sequence and turn it into a single video file.
I tried copying all the stills into the watch folder, that made 60 individual video files (one for each image).
I tried making a folder inside the watch folder, and copying all the images into it.. to which Media Encoder did nothing.
What am I missing? Will Media Encoder take image sequences and render them out as a audio-less video for me?
Thanks for any imput.

Hi action_packed,
This is from the documentation: http://helpx.adobe.com/media-encoder/using/add-items-encoding-queue.html
Still Image Sequences are not supported as source footage through Watch Folders. If a set of still images is placed in the folder being watched, each individual still file will be added as a separate item to the Queue rather than than the entire sequence as a single piece of footage.
Make a feature request for that here: http://adobe.ly/feature_request
Thanks,
Kevin

TS3274 If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot.

If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot?

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

HT201401 cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?

cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?

Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider.

MSO image sequence issue

Hello,
I've been having some issues with some MSO image sequences in my article. I have a few autoplay MSO image sequences that works perfectly in the desktop viewer, but won't seem to play on the iPad. I have Adobe Content Viewer v32.4.2. The weird thing is, there are other autoplay MSO image sequence within the same article in the folio that works on the iPad without a hitch.
Is there anybody that is experiencing similar issue? Any help would be greatly appreciated!
Thanks!

hi bob, here's the screenshot of the settings in folio overlays panel:
"Show first image initially" is selected
"Auto Play" is selected
Speed is set to 30 fps
Play is set to 1 time
"Stop at Last Image" is selected
Thanks for responding!!

Jumpy playback from image sequences rendered in Apple Prores and then exported to h264

I will start by saying I have been using FCP since 1.0 and am in no way new to this software, but this issue has me going crazy.
First the Specs:
MacPro 2 x 2.66 Quad cor Intel Xeon
16 gig Ram
OS 10.9.2
FCP 7.0.3 (sorry but I am not a fan of FCP10 at all)
In other words, a beast of a system that has played back everything I have ever built on it for years until now. So now for the issue: I work with an amazing 3D Max builder and we have created a building animation exported from that program into and image sequence ( we have tried JPG, TGA and PNG still all with the same effect). I open Quicktime 7 Pro, build the image sequence, save as .mov, import into FCP and drop it into my 1080p30 Apple Prores (HQ ... we also tried SQ) timelines. The timeline renders perfectly and I can play the video perfectly through my system out of Firewire 800 to my Motu V4HD device which then converts the signal to HDMI to my 55" LED TV. The video and playback is perfect.... until:
If I try to play back the same exact time line into an exported video file, the file will play back with random jumpyness in it. I say random since you can play it back 10 times and it will hiccup during playback at different spots in the video. If you review every frame in the file though using Quicktime 10, 7 or VLC viewer, every frame is perfect. So, it must be the data rate right? Wrong. I have exported now to H264 MP4, M4V, MOV , ect, etc at different data rates from 4mb to 40 mb per second. They all have the same randow jumpyness to it. So it must be my computer right? Nope. I have a Macbook pro that is more powerful than this machine and I rebuild the file using the same method (something I have done a thousand times before) and the exported file does the same thing on that machine. I had my friend do it on his machine... same thing. ERRRR....
We have even tried using After Effects and Premier to the same result. Rendered it straight from Quicktime Pro, same. Rendered it to 720p30, same. Render it to 24fps, same. I had another editor render it using whatever methods he wanted to use... same. Tried Compressor, SAME. Tried Adobe Media Encoder, SAME......We even, god forbid, used a PC running Premier and built the image sequence and rendered to h264 at 30fps, 5mbs.... @#$@#$ SAME!
We just remade the 3D Studio Max export into a 60fps animation since I thought that the individual frames we appearing too far apart and thus causing the jumpyness. That was causing the playback of the upclose objects flying across the screen fast to appear jittery, but not the random playback jumps. The 60fps did smooth out the animation greatly during fast flybys, but the playback jumps are still there in all players, QT, VLC, the web, etc.
I was starting to think this issue is realted to Mavericks, but since the PC did the same thing that is not it either. I have linked a sample of the clip below exported to 720p30, 25mbs... something that is much smaller than the original and should playback smooth very easily on any of my systems.
FYI: I have now opened numerous projects I have edited over the last few years and noticed that all of them are now jumpy, so this isn't just an image sequence issue. While the other projects don't use image sequences and instead are shot footage edited together, there is still the random jump (far less than the image sequence as you will see) but they are now there... ***? I have cleared preferences in FCP which helps for a short period of time, but once exported I get the same glitch.
As I said... I am stumped... ANYONE have ideas for me to try?
Here is a sample file for you all to see and please tell me if anyone does not see the issue after playing it several times in a row.
www.media3lv.com/switch/NORTH-sample-720p30_25mb-sec.zip
One last thing to note... my main goal for these videos is YouTube or Vimeo playback via our company website. I have a few other animations online right now using YouTube and the problem is also showing there. At first I thought it was just my videos, but I have looked at numerous YouTube videos now showing 3D animation and alot of them are jumpy.
www.supernap.com/supernap-building-design.html
www.supernap.com/supernap-tscif-exchange.html
These don't show the issue as bad since the camera fly is much slower, but why is this occuring and is it coming from my source, or is this a known youtube issue? I can program this using out own modules, but YouTube and Vimeo allow for multiple resolutions and a checker script which makes it easier to share over all devices at all quality up to 1080p.
Advice is welcome and appreciated?

I have tried at actual, full screen, using 1080p30 size from the original compressed to 4mbs (something my system can handle without blinking), 720p30, etc. etc. etc. Nothing stops the jumps. Even the activity monitor shows only 5%-15% processing being used by QT and/or FCP.
I plan to pull my old G5 out of the closet, it runs 10.6.8 and is still rock solid for video editing in FCP7. If it plays smooth on that 8 year old system then I know it's Mavericks. I'll try that tonight. It floors me though why the original 1080p30 will playback perfect via FCP and Motu, but once I turn of external monitoring and just try to play it via the preview monitor it is jumpy as **** and then the exported file does the same thing. So strange. I even deleted prefences of FCP and that does help with screen playback initially, but it always gets jumps in it after playing for a while.
I knew I should not have started using Mavericks and I HATE FCP10.

Image Sequencing in Quick Time Pro

Since upgrading to Snow Leopard I have been unable to get Quick Time Pro to created an Image Sequence. I'm wondering if this is an issue created by Quick Time Pro being moved to its new location in Snow Leopard.
Can anyone, who's recently upgraded, test Image Sequencing out and see it is still working in Snow Leopard?
Here's what I've been doing:
I have a folder of photos named sequentially:
photo1.JPG
photo2.JPG
photo3.JPG
photo4.JPG
photo5.JPG
I choose "Open Image Sequence"from the File menue
I choose the first file in the folder
A dialog comes up asking about the frame rate
The entire screen turns black
I choose "Present Movie" from the View menu
The controls show the movie is playing, but nothing but black shows on the screen.

My experience is that the feature 'open a sequence of images' does not work in 10.6.
I ran Software Update hoping to upgrade to 7.6.4 but was not prompted to install any updates.
Steps taken:
Clicked File, Open Image Sequence…, Select folder
The Open button is not available to click after this is done where it was in the past.
Selecting an image, within the selected folder, illuminates the Open button. It is not possible to select additional items by keyboard (shift, option, command) with they keyboard or mouse and mouse alone (click & drag).
Quicktime prompts as the OP notes but I see the image with the selected time delay where they did not.
This has been tested on a Mac Pro and a MacBook Pro, both running 10.6.1.

Image Sequence | PDF-Article

Is there a way to keep one-finger-gestures work on an image sequence placed in an PDF-Article? I can't move to another page nor article if i try swiping in the image sequence area. The option to change picture by swiping is off.
Thanks.
Tools V24, Viewer App V24, CS6,

Is your image seq. covers the screen? Does your image seq. require some actions from the reader?
If its just animation with no interaction from the reader place an invisible button which point to an invisible MSO on top of everything.
Mohd

5K Retina iMac can't open Image Sequence quicktime 7 Pro and 10.10 Yosemite

Brand new and fully loaded iMac 5K crashes every time I attempt to open an image sequence in Quicktime 7 Pro, a feature that is not available in Quicktime X. I have retried, re-installed, and still issues across the board.
Someone please fix this...
System Specs:
OSX 10.10
iMac (Retina 5K, 27-inch, Late 2014)
4 GHz Intel Core i7
32 GB 1600 MHz DDR3
AMD Radeon R9 M295X 4096 MB
Quicktime 7 Pro 7.6.6 (1709)
Quicktime Player 10.4
To replicate, just open quicktime 7 pro, File>> Open Image Sequence, and then load a camera card full of photos and just wait for it to crash.

If so, please send me a screen shot of your quicktime components folder, maybe you have a codec that I don't.
Also have some legacy codecs turned back on (but Photo-JPEG as used to store image sequence files is not one of them and remains on by default under Yosemite).
Also using JPEG compressed photos from a 24 MP Nikon but restricting resolution to 2560x1920 (4:3), 2560x1707 (3:2), and 2560x1440 (16:9) with max number of photos limited to 2^16-1 (65535).
Also posted a screen capture of my quick test to ensure the QT 7 Pro "Open Image Sequence" option was still working. (Video may be a bit sluggish as I was using QT X to screen capture my use of QT 7 Pro to open an image sequence and forgot that I was also simultaneously still encoding How to Train Your Dragon 2 for my iTunes library.) [OPEN IMAGE SEQUENCE VIDEO]
You may wish to check your QT 7 PLIST file as a corrupted file can sometimes cause the app to crash.

Jagged Edges and Unstable Images when converting from Image Sequence to DV

Hi,
I have an Image Sequence (very good quality) that I'm trying to convert using Graphic Converter into DV NTSC Video.
I chose Progressive scan.
I find that the Images appear to have Jagged Edges especially when there is movement involved. Also, the entire image as a whole appears to be Unstable/ Vibrate Slightly.
Does anyone have Experience with this?
Thanks,
Rajnesh Domalpalli

Ntsc dv should be interlaced. also if you are viewing on a computer monitor the footage will appear nasty. It's best to view via an NTSC monitor.Do you have Final cut? if your images are correctly sized you should be able to drop the sequence into a final cut sequence set to DV NTSC and render out the resulting video. You will likely need a multiformat monitor as I believe the standard in India is a PAL variant PAL B not NTSC . in NTSC the screen is filled first by odd lines (Field1) then by even lines (Field2)thus a single pixel line will appear to turn off and on as the screen fills between odd and even lines. Straight lines and angled lines exhibit aliasing and flickering particularily when viewed on a computer monitor because computer screens fill the screen progressively from top to bottom and at a much higher refresh rate than NTSC. hope this helps

External screen turns green?

I've had this setup for a while now.. A 12 inch PB with a CRT 17 inch monitor connected to the PB through the "mini dvi to vga" adapter..
Now this is the problem: since a few days the image on my external screen is green.. It's not totally green, i can see pictures and programs but it's like the color balance isn't right.
First I tried to change this through display calibration -> didnt help
Then i tried to manually adjust the color balance through the screen display settings -> didn't help..
So I thought my crt monitor was broken. But then I connected my PB to another external screen trough my "mini dvi to vga" adapter. And I had the same green screen. Then I knew it wasn't my crt monitor that was broken but it had something to do with my output signal..
Fortunately a friend of mine has a nice 20 inch tft display. I tested the connection again with the "mini dvi to vga" adapter and got the same green screen. But then I connected my PB to his 20 inch screen through a "mini dvi to dvi" adapter and the green was gone! So it couldn't be the output singal of my PB..
So i figured my "mini dvi to vga" adapter must not work properly somehow. I don't know how it could have broken. It happened just like that. I turned off my PB, and when I turned it back on the external screen turned green. I didn't do anything weird with it..
Could this be? That the adapter is broken? Or do you guys think there might be something wrong with the output signal after all?
Anyone encountered something similar?

So I went to an apple store today, and explained them my problem. We tried a new "mini-dvi to vga" adapter but still the external screen was green!! Also, when using my adapter that I supposed was broken on another PB the output singal was perfect! So as it turns out, it's my PB thats not working properly..
The guys at the store said it must be somthing with the motherboard.. I just don't think I can miss my PB for more than a few days!! :P

Image Sequence / MSO reload on screen turn

Similar Messages

Maybe you are looking for