Image size and profiles in Aperture;

version 3.0.3.
First problem is I can't see where I can fix the image size before getting to the print page! I prefer to do this and preview it before printing, as I used to in PS and then Lightroom.
Other problem is that Aperture tells me to turn off my printer colour management, but I can't get to such a control from the HP B9180 driver that is now part of OSX (10.6).
Help please!

Pat,
You don't need to set the image size as such. The image prints on the page according to two sets of criteria:
1. Whether you set dpi to custom or a specific value, and
2. The page margins you set either as a printing once-off, or as a new printing pre-set.
For example, I print "arty" photos in a portrait format on A4 matte paper. Left and right margins are around 3cm, top margin is around 3cm, bottom margin is around 5 cm (all numbers are from memory...). I have a title just below the image.
I created this particular page setup for a certain photo and liked it so much I saved it as another print preset. Any photo I print using that preset fits within the margins defined. The very next print might be the same photo, but this time printing A3+ on Ilford Galerie Smooth Pearl. Choose the photo, select the relevant print pre-set, print. Re-sizing is irrelevant - the print in both cases is coming from the processed raw at maximum resolution.
Regards,
Calx

Similar Messages

Access image size and color profile

Hi all,
Is it possible to access image size and color profile ? If not, will it be possible in CS6 ?
Thanks.

Load the external XMP library and get it from that?

Image size and dimensions in Safari

Is there a fast method of viewing image size and dimentions in Safari? I can open image in new tab and see its width and height in tab/window name. I can save image to the Desktop and see file size but it's not convenient. Is there some another way without opening an saving image somewhere like Control+click -> Properties?
iMac G4 Mac OS X (10.4.3)

Pat,
You don't need to set the image size as such. The image prints on the page according to two sets of criteria:
1. Whether you set dpi to custom or a specific value, and
2. The page margins you set either as a printing once-off, or as a new printing pre-set.
For example, I print "arty" photos in a portrait format on A4 matte paper. Left and right margins are around 3cm, top margin is around 3cm, bottom margin is around 5 cm (all numbers are from memory...). I have a title just below the image.
I created this particular page setup for a certain photo and liked it so much I saved it as another print preset. Any photo I print using that preset fits within the margins defined. The very next print might be the same photo, but this time printing A3+ on Ilford Galerie Smooth Pearl. Choose the photo, select the relevant print pre-set, print. Re-sizing is irrelevant - the print in both cases is coming from the processed raw at maximum resolution.
Regards,
Calx

How do you change the image size and resolution in photoshop everytime I change the width the height changes my measurements will not stay

Can someone assist me with changing image size and resolution. each time I change the width the height changes and vice/versa?

There's a chain link between width and height. The point is to keep the aspect ratio the same, otherwise your picture would get stretched.
You click on the chain-link to shut that off and you can adjust width and height separately.
Also could you give us your version of Photoshop, what OS you are running it on (Windows 7 for example) and what exactly you want to do with your document?
Resolution is the print term for how many pixels will be printed on an inch of paper. It doesn't apply if your image is intended for screen viewing.
Gene

Reduce image size and print it out?

I scanned an image (coloring on a postcard). This size is too big to fit into a 'album' picture in MS Picture It! All I want to do is REDUCE the image and save it so that it will fit into the computer photo album I'm creating.
I've tried Image/Resize/Image Size and changed the sizing, but it still comes out the exact same size as the original. What am I doing wrong?

> I want to REDUCE the image, not enlarge it.
I understood that - what makes you think I didn't?
> It's 948x645 pixels. I just want the image about an inch (respectively) smaller
You can't think in terms of inches for screen images. You have to work in pixels and the actual size will depend upon the screen resolution on the machine being used to view the image.
I'd reduce the pixel size by about 80 to get the effect that you want. Use Image/Resize/Image Size and make sure that you have "Resample" checked.

Recommended image size and dimensions for images displayed on iPad retina?

What are the recommended dpi image size and dimensions for images designed in DPS app as displayed on an iPad retina?

Take a look at the following link:
http://blogs.adobe.com/indesigndocs/2012/03/guidelines-for-creating-folios-for-ipad-3.html

Image size and type

what Icon / Image size and type we should use of our own menu ?
Giuseppe

Hi Giuseppe,
I'm not sure what restrictions there are on image type but I always use a 24bit Bitmap image with width 18px and height 14px. For transparency, set the background colour to RGB 192-220-192 and SBO will automatically make this area transparent, regardless of the colour scheme the user has on the client.
Kind Regards,
Owen

Checking Image Size and Dimensions

How do I check the size of an image like a Signature or another image without having to save it and then checking it? Is there a way to check it in Safari?

What? I don't see "Inspect Element" anywhere.
Are there any plugins (perhaps at pimpmysafari.com) where we can add functions such as "Properties" for viewing image size and dimensions, as well as "View Image" to view the image by itself? I'm trying to convert from Firefox, but these are a couple of the things getting in the way.

Image Sizes and Resolution standards?

are there any standards for image sizes and resolution for mobile games specifically: backgrounds and backdrops?
i will be porting my game for various cell phones and i'd like to resize images to fit perfect on all cell phone screens, so what would be the best way to do this and what should my image attributes (height, width) be?
i've tried researching on google to see if there were any standards and couldn't seem to find any. if these standards are non-existent what image sizes have you used that you found worked best on various mobile phones?
thanks
Edited by: sassy on Jun 2, 2008 1:49 PM

Google's right, there are no real standards for screen sizes. Some are more common than others, but there are dozens of common screen sizes.
The most common are...
176x208 (same as 176x220, but with no status bar)
240x320
176x220
[Getjar resolution stats|http://www.mobref.com/statistics/world/gDispResolution]
Unfortunately, many phones are slightly more or slightly less than those. If you cover those, you're fairly well off though. If you can make your game resolution independent, that's your best option, though with intricate overlays it may be nearly impossible to do.

Larger image size and disk performance

hey all,
Granted the majority of users here won't experience issues with larger image sizes, but i'm hoping a few may be able to shed some experience.
I work with a H3D, Mamiya RB (with various Leaf backs) and also drum scanned film. The issue is that often a single image size can be anything from 150mb upto 500mb, this is excluding any post production changes.
My current aperture library is on a FW800 disk, but disk i/o is crippling the box and program at the moment. I'm looking at the express slot and wondering who here is running a disk off that and what they feel it's like from a performance perspective.
An example is a recent location shoot which has a handful of images above 500mb each. Aperture takes around 10-15 mins to startup when this folder is selected (constantly processing the image every time it starts) and this leads to a totally unresponsive OS.
How are you handling large files with Aperture?
Mac OS X (10.3.9)

On the Quad I process 250Mb+ TIF scans, not often, but often enough. External drives 7200rpm in a Sonnet 500P encl. attached to eSATA muliport card (Sonnet E2P). Performance is equal to internal so far as I can judge.
I recall the PCMCIA then PC Card bus speed was horrendously slow. Not sure what the Expresscard bus speed is, but it would be a crying shame to attach 300Gb/s burst capable drives (or RAID 5 driving 200Mb+ continuous) to a backend bus capable of a few Mb.
As Alan notes, a MBP may be OK for field work and tethered shooting, but for the image sizes you have, the preferred solution would be a Mac Pro.
G.

How to know the image size and coding of our j2me project

Hi,
I have developed a game and i did the obfuscation. My jar size is now 170KB. How can differentiate the coding size and the image size from the total jar size.
If i asked any thing wrongly, please forgive me and clarify my doubt.
I am looking forward to meet ur queries if any.
Thanks and Regards,
Hithayath.

<?xml version="1.0" encoding="UTF-8"?>

<project xmlns:projdeps2="http://www.netbeans.org/ns/ant-project-references/2" basedir=".." default="jar" name="-impl">
<target name="pre-init"/>
<target depends="pre-init" name="pre-load-properties">
<property file="nbproject/private/private.properties"/>
<property value="0.0.1" name="deployment.number"/>
<property value="000002" name="deployment.counter"/>
<property location="${netbeans.user}/build.properties" name="user.properties.file"/>
<available file="${user.properties.file}" property="user.properties.file.exists"/>
</target>
<target unless="config.active" depends="pre-load-properties" name="exists.config.active">
<echo message="Active configuration (config.active property) is not set - using default." level="warning"/>
<property name="config.active" value=""/>
</target>
<target unless="netbeans.user" depends="pre-load-properties" name="exists.netbeans.user">
<echo message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically." level="warning"/>
</target>
<target unless="user.properties.file.exists" depends="pre-load-properties" name="exists.user.properties.file">
<echo message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)." level="warning"/>
</target>
<target depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file" name="load-properties">
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
<containsregex pattern="^platform.active=|^deployment.method="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="${user.properties.file}">
<filterchain>
<replaceregex replace="platform." pattern="^platforms\.${platform.active}\."/>
<replaceregex replace="deployment.scriptfile=" pattern="^deployment\.${deployment.method}\.scriptfile="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
</filterchain>
</loadproperties>
</target>
<target unless="platform.active" depends="load-properties" name="exists.platform.active">
<echo message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)." level="warning"/>
</target>
<target depends="load-properties" unless="platform.configuration" name="exists.platform.configuration">
<echo message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration." level="warning"/>
<property value="CLDC-1.0" name="platform.configuration"/>
</target>
<target depends="load-properties" unless="platform.profile" name="exists.platform.profile">
<echo message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile." level="warning"/>
<property value="MIDP-1.0" name="platform.profile"/>
</target>
<target depends="pre-init,load-properties,exists.platform.active,exists.platform.configuration,exists.platform.profile" name="init">
<fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-modules-kjava-antext.jar file in the IDE installation directory.</fail>
<fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
<fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
<fail unless="src.dir">Must set src.dir</fail>
<fail unless="build.dir">Must set build.dir</fail>
<fail unless="build.classes.dir">Must set build.classes.dir</fail>
<fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
<fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<fail unless="dist.dir">Must set dist.dir</fail>
<fail unless="dist.jar">Must set dist.jar</fail>
<fail unless="dist.jad">Must set dist.jad</fail>
<fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
<fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
<fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
<property value="" name="abilities"/>
<property value="" name="obfuscator.classpath"/>
<property value="" name="kjava.configuration"/>
<property value="UEI-1.0" name="platform.type"/>
<property value="" name="platform.device"/>
<property value="0" name="obfuscation.level"/>
<property value="false" name="sign.enabled"/>
<property value="file://" name="dist.jad.url"/>
<property value="1.3" name="javac.source"/>
<property value="1.1" name="javac.target"/>
<property value="${file.encoding}" name="javac.encoding"/>
<condition property="no.deps">
<istrue value="${no.dependencies}"/>
</condition>
<condition property="no.javadoc.preview">
<isfalse value="${javadoc.preview}"/>
</condition>
<condition value="${filter.excludes},**/*Test.java,**/test,**/test/**" property="filter.excludes.evaluated">
<istrue value="${filter.exclude.tests}"/>
</condition>
<property value="${filter.excludes}" name="filter.excludes.evaluated"/>
<condition value="" property="evaluated.run.security.domain">
<isfalse value="${run.use.security.domain}"/>
</condition>
<condition value="" property="deployment.do.override.jarurl">
<istrue value="${deployment.override.jarurl}"/>
</condition>
<property value="${run.security.domain}" name="evaluated.run.security.domain"/>
<taskdef resource="org/netbeans/modules/kjava/antext/defs.properties">
<classpath>
<pathelement path="${libs.j2me_ant_ext.classpath}"/>
</classpath>
</taskdef>
<uptodate targetfile="${preprocessed.dir}/.timestamp" property="no.clean.before.build">
<srcfiles dir="nbproject">
<include name="project.properties"/>
<include name="build-impl.xml"/>
</srcfiles>
</uptodate>
<condition property="skip.deployment">
<equals trim="true" casesensitive="false" arg2="NONE" arg1="${deployment.method}"/>
</condition>
<condition property="skip-sign-keystore-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.keystore.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore.password}"/>
</not>
</and>
</or>
</condition>
<condition property="skip-sign-alias-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.alias"/>
<isset property="sign.alias.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias.password}"/>
</not>
</and>
</or>
</condition>
<antcall inheritrefs="true" inheritall="true" target="post-init"/>
</target>
<target name="post-init"/>
<target name="deps-jar" depends="init" unless="no.deps"/>
<target description="Clean project in case its meta information has changed." unless="no.clean.before.build" depends="init" name="conditional-clean">
<antcall target="do-clean" inheritall="true" inheritrefs="true"/>
</target>
<target name="pre-preprocess"/>
<target description="Preprocess project sources." depends="init,pre-preprocess,deps-jar,conditional-clean" name="preprocess">
<mkdir dir="${preprocessed.dir}"/>
<echo file="${preprocessed.dir}/.timestamp" message="ignore me"/>
<nb-prep encoding="${javac.encoding}" preprocessfor="${config.active},${abilities}" destdir="${preprocessed.dir}">
<fileset excludes="${filter.excludes.evaluated}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</nb-prep>
<antcall inheritrefs="true" inheritall="true" target="post-preprocess"/>
</target>
<target name="post-preprocess"/>
<target description="Extracts all bundled libraries." depends="init,deps-jar,conditional-clean" name="extract-libs">
<mkdir dir="${build.classes.dir}"/>
<nb-extract excludeManifest="true" dir="${build.classes.dir}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</nb-extract>
</target>
<target name="pre-compile"/>
<target description="Compile project classes." depends="init,preprocess,extract-libs,pre-compile" name="compile">
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" bootclasspath="${platform.bootclasspath}" srcdir="${preprocessed.dir}" destdir="${build.classes.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<copy todir="${build.classes.dir}">
<fileset excludes="${filter.excludes.evaluated},${build.classes.excludes}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</copy>
<antcall inheritrefs="true" inheritall="true" target="post-compile"/>
</target>
<target name="post-compile"/>
<target name="pre-compile-single"/>
<target description="Compile selected project classes." depends="init,preprocess,extract-libs,pre-compile-single" name="compile-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" includes="${javac.includes}" bootclasspath="${platform.bootclasspath}" destdir="${build.classes.dir}" srcdir="${preprocessed.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<antcall inheritrefs="true" inheritall="true" target="post-compile-single"/>
</target>
<target name="post-compile-single"/>
<target depends="init" name="create-jad">
<mkdir dir="${build.dir}"/>
<dirname property="dist.jad.dir" file="${dist.dir}/${dist.jad}"/>
<mkdir dir="${dist.jad.dir}"/>
<condition value="${manifest.apipermissions}" property="evaluated.manifest.apipermissions">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition value="${manifest.pushregistry}" property="evaluated.manifest.pushregistry">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition property="contains.manifest.configuration">
<contains string="${manifest.others}" substring="MicroEdition-Configuration: "/>
</condition>
<condition property="contains.manifest.profile">
<contains string="${manifest.others}" substring="MicroEdition-Profile: "/>
</condition>
<property name="evaluated.manifest.apipermissions" value=""/>
<property name="evaluated.manifest.pushregistry" value=""/>
<property value="" name="manifest.jad"/>
<property value="" name="manifest.manifest"/>
<echo file="${dist.dir}/${dist.jad}">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</echo>
<echo file="${build.dir}/manifest.mf">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</echo>
<antcall inheritrefs="true" inheritall="true" target="add-configuration"/>
<antcall inheritrefs="true" inheritall="true" target="add-profile"/>
</target>
<target unless="contains.manifest.configuration" name="add-configuration">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Configuration: ${platform.configuration}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Configuration: ${platform.configuration}
</echo>
</target>
<target unless="contains.manifest.profile" name="add-profile">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Profile: ${platform.profile}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Profile: ${platform.profile}
</echo>
</target>
<target name="pre-obfuscate"/>
<target description="Up-to-date check before obfuscation." depends="init,compile" name="obfuscate-check">
<uptodate targetfile="${obfuscator.destjar}" property="no.obfusc">
<srcfiles dir="${build.classes.dir}"/>
</uptodate>
</target>
<target unless="no.obfusc" description="Obfuscate project classes." depends="init,compile,obfuscate-check,pre-obfuscate" name="obfuscate">
<dirname property="obfuscator.srcjar.dir" file="${obfuscator.srcjar}"/>
<dirname property="obfuscator.destjar.dir" file="${obfuscator.destjar}"/>
<mkdir dir="${obfuscator.srcjar.dir}"/>
<mkdir dir="${obfuscator.destjar.dir}"/>
<jar basedir="${build.classes.dir}" jarfile="${obfuscator.srcjar}"/>
<property value="" name="obfuscation.custom"/>
<nb-obfuscate extraScript="${obfuscation.custom}" obfuscationLevel="${obfuscation.level}" classpath="${platform.bootclasspath}" obfuscatorclasspath="${obfuscator.classpath}" destjar="${obfuscator.destjar}" srcjar="${obfuscator.srcjar}"/>
<mkdir dir="${obfuscated.classes.dir}"/>
<unjar dest="${obfuscated.classes.dir}" src="${obfuscator.destjar}"/>
<antcall inheritrefs="true" inheritall="true" target="post-obfuscate"/>
</target>
<target name="post-obfuscate"/>
<target name="pre-preverify"/>
<target description="Preverify project classes." depends="init,compile,obfuscate,pre-preverify" name="preverify">
<mkdir dir="${preverify.classes.dir}"/>
<nb-preverify commandline="${platform.preverifycommandline}" platformtype="${platform.type}" platformhome="${platform.home}" configuration="${platform.configuration}" classpath="${platform.bootclasspath}" destdir="${preverify.classes.dir}" srcdir="${obfuscated.classes.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-preverify"/>
</target>
<target name="post-preverify"/>
<target unless="skip-sign-keystore-password-input" if="netbeans.home" depends="init" name="set-keystore-password">
<nb-enter-password passwordproperty="sign.keystore.password" keystore="${sign.keystore}"/>
</target>
<target unless="skip-sign-alias-password-input" if="netbeans.home" depends="init" name="set-alias-password">
<nb-enter-password passwordproperty="sign.alias.password" keyalias="${sign.alias}" keystore="${sign.keystore}"/>
</target>
<target name="pre-jar"/>
<target description="Build jar and application descriptor." depends="init,preverify,create-jad,set-keystore-password,set-alias-password,pre-jar" name="jar">
<dirname property="dist.jar.dir" file="${dist.dir}/${dist.jar}"/>
<mkdir dir="${dist.jar.dir}"/>
<jar manifest="${build.dir}/manifest.mf" jarfile="${dist.dir}/${dist.jar}" compress="${jar.compress}">
<fileset dir="${preverify.classes.dir}"/>
<fileset dir="${obfuscated.classes.dir}">
<exclude name="**/*.class"/>
</fileset>
</jar>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${dist.jar}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
<antcall inheritrefs="true" inheritall="true" target="post-jar"/>
</target>
<target name="post-jar"/>
<target description="Rebuild the application." depends="init,clean,jar" name="rebuild"/>
<target description="Run MIDlet suite." depends="init,jar" name="run">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target description="Quick Run already built MIDlet suite." depends="init" name="run-no-build">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target depends="init,clean,jar" description="Debug project." name="debug">
<delete file="${preprocessed.dir}/.timestamp"/>
<parallel>
<nb-run commandline="${platform.debugcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" jadfile="${dist.dir}/${dist.jad}" device="${platform.device}" platformhome="${platform.home}" platformtype="${platform.type}" debuggeraddressproperty="jpda.port" debugserver="true" debugsuspend="true" debug="true"/>
<sequential>
<sleep seconds="5"/>
<antcall target="nbdebug"/>
</sequential>
</parallel>
</target>
<target if="netbeans.home" description="Start NetBeans debugger" name="nbdebug">
<nb-kjava-debug period="2000" timeout="30000" name="${app.codename}" address="${jpda.port}">
<bootclasspath>
<path path="${platform.bootclasspath}"/>
</bootclasspath>
<classpath>
<path path="${dist.dir}/${dist.jar}"/>
</classpath>
<sourcepath>
<path path="${src.dir}"/>
<path path="${libs.src.path}"/>
</sourcepath>
</nb-kjava-debug>
</target>
<target depends="init,preprocess" name="javadoc">
<mkdir dir="${dist.javadoc.dir}"/>
<javadoc private="${javadoc.private}" windowtitle="${javadoc.windowtitle}" version="${javadoc.version}" author="${javadoc.author}" splitindex="${javadoc.splitindex}" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" use="${javadoc.use}" notree="${javadoc.notree}" bootclasspath="${platform.bootclasspath}" destdir="${dist.javadoc.dir}" source="${javac.source}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
<sourcepath>
<pathelement location="${preprocessed.dir}"/>
</sourcepath>
<fileset dir="${preprocessed.dir}"/>
</javadoc>
<antcall target="browse-javadoc"/>
</target>
<target unless="no.javadoc.preview" if="netbeans.home" name="browse-javadoc">
<nbbrowse file="${dist.javadoc.dir}/index.html"/>
</target>
<target name="pre-clean"/>
<target description="Clean build products." if="no.clean.before.build" depends="init,conditional-clean" name="clean">
<antcall inheritrefs="true" inheritall="true" target="do-clean"/>
</target>
<target depends="pre-clean" name="do-clean">
<delete dir="${preprocessed.dir}"/>
<delete dir="${build.classes.dir}"/>
<delete file="${obfuscator.srcjar}"/>
<delete file="${obfuscator.destjar}"/>
<delete dir="${obfuscated.classes.dir}"/>
<delete dir="${preverify.classes.dir}"/>
<delete file="${build.dir}/manifest.mf"/>
<delete file="${dist.dir}/${dist.jar}"/>
<delete file="${dist.dir}/${dist.jad}"/>
<delete dir="${dist.javadoc.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-clean"/>
</target>
<target name="post-clean"/>
<target name="pre-deploy"/>
<target if="deployment.do.override.jarurl" depends="init,jar,pre-deploy" name="override-jad">
<property value="${dist.jar}" name="deployment.jarurl"/>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${deployment.jarurl}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target unless="skip.deployment" if="deployment.method" depends="init,jar,override-jad,pre-deploy" name="deploy">
<fail unless="deployment.scriptfile">Property deployment.${deployment.method}.scriptfile not set. The property should point to an Ant script providing ${deployment.method} deployment.</fail>
<ant inheritrefs="true" inheritall="true" antfile="${deployment.scriptfile}">
<property location="${dist.dir}/${dist.jad}" name="deployment.jad"/>
<property location="${dist.dir}/${dist.jar}" name="deployment.jar"/>
</ant>
<propertyfile file="nbproject/private/private.properties">
<entry pattern="000000" default="2" operation="+" type="int" key="deployment.counter"/>
<entry value="${deployment.counter}" key="deployment.number"/>
</propertyfile>
<replaceregexp replace="deployment.number=\2\3.\5\6.\8\9" match="^deployment.number=[0-9]*(0|([1-9]))([0-9])(0|([1-9]))([0-9])(0|([1-9]))([0-9])$" file="nbproject/private/private.properties" byline="true"/>
<antcall inheritrefs="true" inheritall="true" target="post-deploy"/>
</target>
<target name="post-deploy"/>
<target name="for-all-configs">
<antcall inheritrefs="false" inheritall="false" target="${target.to.call}">
<param value="" name="config.active"/>
</antcall>
</target>
<target name="jar-all">
<antcall target="for-all-configs">
<param value="jar" name="target.to.call"/>
</antcall>
</target>
<target name="javadoc-all">
<antcall target="for-all-configs">
<param value="javadoc" name="target.to.call"/>
</antcall>
</target>
<target name="deploy-all">
<antcall target="for-all-configs">
<param value="deploy" name="target.to.call"/>
</antcall>
</target>
<target name="rebuild-all">
<antcall target="for-all-configs">
<param value="rebuild" name="target.to.call"/>
</antcall>
</target>
<target depends="load-properties" name="clean-all">
<fail unless="build.root.dir">Property build.root.dir is not set. By default its value should be \"build\".</fail>
<fail unless="dist.root.dir">Property dist.root.dir is not set. By default its value should be \"dist\".</fail>
<delete dir="${build.root.dir}"/>
<delete dir="${dist.root.dir}"/>
<antcall target="for-all-configs">
<param value="clean" name="target.to.call"/>
</antcall>
</target>
</project>
I have pasted the content of that file, please do the needs....

New Image Size and Resolution in CC

Hi there.
Ok, maybe i'm missing something, but how do i reduce the ppi's of a given image in the Photoshop CC? Changing it in the image size, in the Resolution field, it acomplish nothing. It logs an entry in the History panel, but nothing changes in the picture. Did Adobe changed how this works, or it's just a bug?
Thank you.

Try setting to real-world measurement, like inches or cm.
Hi Charles, i think that change in cm/mm/in it's the only way to change the image ppi (in my case save/resample it to 108ppi). Can you confirm that this is correct?
Anyway when i go to image size (new panel of CC) the w/h are:
1) grey and always set in pixel with resample flagged.
2) always set in inches with resample NON-flagged (also if my ruler unit is in Pixel).
(and actually that is not new behavior. CS6 behaved same way when width and height were set to percent)
In CS6 and CC i never seen w/h in percent - where is my error?
Many thanks!

Image size and format for IMovie

I am trying to make a short stop motion animation in IMovie. I have made my images in Adobe illustrator. I transfer the images into IMovie as JPEGS.the images, which are basically line drawings, look sharp and clean but as soon as you watch them as moving pictures they become broken up.
what am I doing wrong? does this have to do with my image size or format?

iDVD will try to downsize the image to work, but your TV often will overscan with the result being edges clipped off. The amount of clipping can vary, so the "TV Safe" settings will typically be the center 80-90% of the image. So, if you add a border that makes the image 10-15% larger, that should display the whole image. For example, if you had a 150 dpi image that was 640x480, you could put a 10% border on it so the final image was 704x528.
John

Image size and/or cropping with iMovie 9

I have a video in .mov format that was created by Roxio's Easy VHS to DVD software. The movie is a copy of a 4:3 aspect ratio videotape. When I review the clips from this movie in iMovie, the size and aspect ratio are identical to the original. However, when I move the clips into an iMovie project, the aspect ratio appears to be the same but all of the edges are severely cropped (it's like one used a zoom feature on the image). I get the same result whether I select 4:3 or 16:9 aspect ratio for the project. I have also had this experience with iPhoto -cropping occurs on any photo being printed or exported. I can convert the .mov into a video DVD or any format, without aspect ratio change cropping. But, that conversion doesn't allow me to edit the .mov.
How do I solve this problem?

I wish someone could answer this. I'm having the same problem. I imported video from my digital tape camera using iMovie (automatically saved as .dv files). In the clip viewer of iMovie (lower right part of iMovie), they appear whole. But when I drag into a project, the clips are severely cropped, just like the original post describes. It doesn't matter if I set the project to 16:9, 4:3, or 3:2 - the same cropping occurs.
What's up with this?

Image size and dpi for iDVD menu custom background?

I created a custom background for my iDVD menu. When showing
on my TV, part of the words and image is cut off on each side, even after adjusting my tv picture between wide screen and standard screen.
What is the correct size and dpi to make a photograph to use as a background
image in the menus? This may have been answered before, so I apologize for posting the same question, if so.

iDVD will try to downsize the image to work, but your TV often will overscan with the result being edges clipped off. The amount of clipping can vary, so the "TV Safe" settings will typically be the center 80-90% of the image. So, if you add a border that makes the image 10-15% larger, that should display the whole image. For example, if you had a 150 dpi image that was 640x480, you could put a 10% border on it so the final image was 704x528.
John

Image size and profiles in Aperture;

Similar Messages

Maybe you are looking for