Image Size Bridge vs Camera Raw

When looking at an image in Bridge (Fav Workspace), the size is different that what the same image shows in Camera Raw (blue lettering at bottom of image). I need to submit images of a certain size - which size is correct?
eg: Bridge indicates 480x320 at 180 ppi 50 KB
     Camera Raw indicates 480x320 at at 400 ppi .2 MP
My company wants images submitted in "MB" not "KB".

480 x 320 pixels is your key here.  Multiply them out:  480 x 320 = 153,600 pixels.  The "standard" photographic "image size in MB" terminology assumes 3 bytes per pixel (one each for red, green, blue), so that 153,600 pixels x 3 bytes / pixel comes to 460,800 bytes, or roughly 0.5 MB.
If 0.5 MB is too small to meet your company's standards, it sounds like this image is too small for you to use.
-Noel

Similar Messages

  • DNGs produced from Hasselblad .fff files display a different image in Bridge and Camera Raw

    Lately, not sure when this started exactly, Bridge CC (and Camera RAW 8.7) are displaying incorrect DNG images!  Instead of showing the image I expect to see, I'll see an old image from days ago.  This seems to carry on from Bridge through to Camera RAW.  But then if I continue on to Photoshop with the image, it'll finally show the correct image. 
    I'm assuming this has something to do with DNG, because if I load another raw file type (like .fff or .NEF), it seems ok.  Also it seems to be ok with DNGs produced from other cameras like Nikon D90.
    My set up:
    - Mac OS X 10.9.5 (Mavericks)
    - Bridge CC
    - Camera Raw 8.7
    - Photoshop CC 2014
    - Hasselblad H4D-50

    HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

  • Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    "Catalog"?  Are you referencing Ps Elements perhaps?
    Wrong forum.  We do not do Elements here.
    Here's the link to the Elements forum:
    Photoshop Elements

  • Images won't open in PS from Bridge and Camera Raw.

    I am suddenly unable to open images in Photoshop CS5 from Bridge or Camera Raw - what have I done wrong - how can I rectify it.

    Mullit wrote:
    I am also have a lot of start up problems with the computer itself and have lost a lot of my desk top, my internet search engine and various other things. Luckily all my documents and pictures are still intact though.
    This sounds serious.  I would make sure you have a backup on a seperate hd or disk or you photos and other documents.  If the drive fails you may loose everything on the hard drive.
    Check your free space and fragmentation on hd.  You should have about 20% free space.  So if you have a 400 gig drive you should have 80 gig free.

  • HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

    Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
    Hi all,
    When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated.  However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
    Thank you!
    HN

    Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG?  Show the same area of the photo and zoom to 100%.
    It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
    The amount of grain depends on the ISO sensitivity setting on the camera.

  • Corrupted RAW in Bridge CC, Camera RAW and Photoshop CC

    Hello,
    I am using up to date versions of Bridge CC, Camera RAW nad Photoshop CC and I have the following problem.
    - after transfer photos from Canon EOS 6D to computer thumbnails in Bridge seems to be fine
    - when I open file in Camera RAW file seem as below example
    - when I open file in Photoshop CC file seem as below example
    - when I open RAW in IrfanView image seems to be fine
    - I can open image in IrfanView, save as TIFF and in Bridge and Photoshop seems to be fine
    - the problem occurs randomly, about 5% of images from 500 images
    Do you have similar problem? Does anybody have any idea?

    The previews are ok in Bridge because it's just a preview jpg, not the actual RAW file.   I'm not sure why it would open OK in Irfanview.  I had a similar problem after a HDD crash and tried Irfanview with no more luck than any of the Adobe programs.
    Have you tried Adobe's DNG converter to see if you get the same result?  Is this a consistent problem, or just this one time?

  • Confused over saving files in Bridge or Camera Raw CS4

    I'm a little confused the way Bridge and Camera Raw saves files that have been adjusted. For example, when I took a photo and just applied a crop to it, I clicked on "save image" in camera raw, set up a new folder and new file name. I clicked on ok expecting to see the uncropped photo in the original source folder. What I saw was the cropped photo under the original file name.
    Ultimately I found the original file by looking through explorer. I guess my question is, Is there a tutorial that explains the way Bridge/Camera Raw saves files?
    Appreciate the help

    The changes applied by Camera Raw are saved as metadata, a few lines of code added to the file or to a separate XML file. If you want to save the changes done by Camera Raw then simply click on Done, the Save button will save a copy, not the current changes back onto the original file.
    Check out the section on Camera Raw from the Help files:
    http://help.adobe.com/en_US/Photoshop/11.0/WSB5C0E258-66DE-4089-9CB0-42F396E2B814.html

  • Bridge and Camera RAW preferences not working

    I'm setting up a new Macbook Pro, late 2013 15", 10.9.2
    CS6 Production Premium, Also have Indesign CS6, LR5, Acrobat Pro 11. Camera RAW is version 8.4. Everything is up to date.
    Bridge and Camera RAW preferences are not working correctly. Bridge prefs related to Bridge display, e.g. color theme, text beneath thumbnails, favorite locations, etc.. all work fine. Bridge prefs open and close fine with no errors. "Double Click Edits Camera RAW Settings in Bridge" does not take. Photoshop launches to open Camera RAW regardless of whether this is checked or not. Camera RAW preferences will not open. Selecting "Camera RAW Preferences" from Bridge does nothing. Camera RAW seems to work fine hosted by Photoshop.
    I tried a new user with the same results.
    What's up with this? Anyone else seeing this? Solution?
    --David

    fixed it with this work around
    Camera Raw 8.4 | No metadata or Camera Raw edit

  • I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files

    I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files on my Canon.
    Any insight/wisdom would be much appreciated. Thanks

    When you try to open in PS what happens?
    In Bridge do you see icons or thumbnails?
    Will it open in ACR in Bridge?

  • Beim cs2 bridge geht camera raw nicht

    beim cs2 bridge geht camera raw nicht

    In Ergänzung zu Willis möchte ich anmerken, dass Camera RAW zu Anfang wirklich nur für RAW-Daten vorgesehen war (daher auch der Name) und deshalb keine Beabeitung von JPGs und anderen Dateien möglich war. Erst mit späteren Versionen wurde die Bearbeitung anderer Bildformate nachgelegt.
    Gruß
    Bernhard

  • CS5 not responding after opening Bridge and Camera Raw

    I have been using bridge, camera raw and cs5 since it was released. I have not any problems until this morning. I am able to open Bridge and Camera Raw, but when trying to open PS CS5, it does not respond?
    Any suggestions?

    Try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
    A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • Bridge CC でCamera Rawが使用できません

    Bridge CC で「ファイル」→「Camera Rawで開く」がグレーアウトしていて使用できません。ショートカットの「command + R」でも反応せず。原因と解決方法をお願いします。気になる動作として、起動時に毎回起動時に「キャッシュのクリアにしっぱ。。。」とポップアップが出ます。キャッシュをクリア、アンインス トール後再度インストールしても解決せず。

    Photoshopからは開けません。Photoshopのバージョンは「CC」  2014.1.0 20140730.r.148、OSは10.9.4です。ちなみにCamera Rawで開こうとしてる画像はJPGです。なのでPhotoshopから通常開けないかと思われます。BrudgeからはJPGでも開けるので、Brudgeで開いています。ちなみにBrudgeのバージョンは「CC」6.1.0.115です。

  • My Photoshop, Bridge, and Camera Raw in CS5 will not update. The update downloads and then says there was an error.

    I am not able to update any of my CS5 files. Especially, Photoshop, Bridge, and Camera Raw.

    Adobe - Photoshop : For Windows
    Adobe - Photoshop : For Macintosh
    Photoshop: Basic Troubleshooting steps to fix most issues
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • With the Photoshop and Lightroom bundle, does Bridge and Camera Raw come with it?

    With the Photoshop and Lightroom bundle, does Bridge and Camera Raw come with it?

    Hi,
    Yes, both Camera Raw and Bridge are included. Bridge will need a separate installation, however.
    regards,
    steve

  • Are Bridge and Mini Bridge and Camera Raw part of PS?

    1.) Are Bridge and Mini Bridge and Camera Raw part of PS? OR do they also come with other programs in the Adobe software suite?
    2.) What is the difference between Bridge and Mini Bridge?
    Thanks.

    1.) The  Bridge application is included in the Photoshop installer, as well as  some other Adobe products.(more info:  http://www.adobe.com/products/creativesuite/bridge/?promoid=GWELP). The  Mini Bridge extension is only included in Photoshop CS5, and InDesign  CS5. The Photoshop Camera Raw plug-in is shared by Photoshop, and  Bridge (and is also found in Photoshop Elements).
    2.) Bridge is a separate application, whereas Mini Bridge is a panel  that's hosted by the Photoshop or InDesign application. Bridge has a fuller feature set than Mini Bridge and can be used by itself. Mini Bridge needs Bridge to create thumbnails, keep files  synchronized, and perform other  tasks, but operates in the context of the Ps or ID host application (ie. drag/drop multiple assets into working document w/o losing document view).
    Online version of Mini Bridge Help: http://help.adobe.com/en_US/creativesuite/cs/using/WS4bebcd66a74275c33c28e88f1235296fe93-8 000.html
    regards,
    steve

Maybe you are looking for