Image size from clients

I am so used to getting poor images from clients and their
digital cameras
that I have never really thought about the best way to get
them.
I now have a client who is a designer for print and can send
me images any
way I like.
I want them large enough so I have my own options for
optimizing but I'm not
sure about what resolution to ask for or does that not make a
great deal of
difference in the long run ?
thanks Joe

Thanks Linda,
joe
"Linda Rathgeber **Adobe Community Expert**"
<[email protected]> wrote in
message news:echqms$52r$[email protected]..
: joe wrote:
: > I am so used to getting poor images from clients and
their digital
cameras
: > that I have never really thought about the best way to
get them.
: > I now have a client who is a designer for print and
can send me images
any
: > way I like.
: > I want them large enough so I have my own options for
optimizing but I'm
not
: > sure about what resolution to ask for or does that not
make a great deal
of
: > difference in the long run ?
: Resolution doesn't matter as much as dimensions for Web
development. If
: he sends you a high resolution image (i.e. 300 ppi)in a
large size, by
: the time you get done resampling it down to a reasonable
enough size to
: use on a Web page, you are going to loose all the detail
available at
: that high resolution anyway.
: Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
http://www.projectseven.com
: Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
: CSS Newsgroup: news://forums.projectseven.com/css/
: Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

Similar Messages

How can you find out an individual image size from multiple images on a canvas

This is probably a really really simple question but I can't for the life of me find how I can find out an individual image size from multiple images on a canvas. eg I have 3 photos i want to arrange 1 large and the other two next to it half the size. How can I edit individual image size on the canvas as when I select the image on a sperate layer I want to resize it just resizes the entire canvas and not the individual image
Thanks

I want to know they exact dimensions though. You can get them by dragging to the 0,0 corner and then reading off of the ruler scale on the sides but its fiddily as you have to zoom right in and work it out. I know in photoshop there is a ruler but is there any other way in Elements?

Image size from header

Hi,
I'm trying to extract image size from header for PNG, JPG, TIFF, BMP and GIF files. So far I got PNG working. I'm having problems finding size info for JPG files. Anyone knows where I can read about it (i didnt find nothing on google) or have the code that works? also for the other image types?
P.S. I dont wanna read the entire image using Image class cause its too slow.

Code Snippet:
ImageInputStream imageStream =
        ImageIO.createImageInputStream(/*File or InputStream*/);
java.util.Iterator<ImageReader> readers =
        ImageIO.getImageReaders(imageStream);
ImageReader reader = null;
if(readers.hasNext()) {
    reader = readers.next();
}else {
    imageStream.close();
    //can't read image format... what do you want to do about it,
    //throw an exception, return ?
reader.setInput(imageStream,true,true);
int imageWidth = reader.getWidth(0);
int imageHeight = reader.getHeight(0);
reader.dispose();
imageStream.close();

How to change an image size from MB to KB

Okay I am at a loss how to change an image from 6.8MB to 290KB or at least in the KB's so we can keep from getting the file is too large message from where we want it to go to. I am at a loss when I move the inches smaller the size is still too small. Daughter is trying to move a picture to a site called my space and she keeps getting a message that the file is too large...

Susan,
Please see my posting to
http://www.adobeforums.com/cgi-bin/webx/.3bc17071/4
Mark

Image size from photoshop to indesign

For some reason if I make an image the exact size in Photoshop and bring it into indesign DPS it is always smaller. Obviously I can resize it but i was curious why this is happening. I set my file up to be 1024 x768 at 72 dpi and save as a JPEG. When i drag that file into the frame in Indesign it is always small in the corner. What am I doing wrong?

You're doing nothing wrong.. try using the place option from the file menu rather than dragging your images and see if there is any difference.

Image size from Illustrator to Photoshop

I'm new to Illustrator and may just be overlooking something here, but here's my the background and question:
I took a screen shot of an image and opened it in Photoshop CS3. I've cropped out a portion I want to use and save the file as a .eps file and open it with Illustrator. Within Illustrator, I recreate the image at the same size as the image I opened (I'm looking at both images at 100% view). I save my new image as a .eps file and then open it with Photoshop. For some reason, the image is about 50% bigger in Photoshop than it was in Illustrator. Any ideas? Is a 100% viewing percentage not really showing the correct size of the image? Or is does the issue lie with how Photoshop CS3 interprets a .eps file from Illustrator CS4?
Thanks in advance for any information/advice.

You have just discovered image resolution and its effect on the display of pixel based images.
In Illustrator there's no resolution. Objects have a defined size and Illy assumes a monitor resolution of 72 ppi as a basis for it's assumptions on the display of graphics and for it's calculations of this 100%.
When exporting into pixel based file formats you can choose the resolution.
In Photoshop the "100%" has no relation to the actual size of things (as defined in Illustrator) but means that one pixel of the image is one pixel of your monitor.
When you open an EPS you get a dialog box in which you specify the way photoshop has to calculate the pixels from the vector and the resolution you want. When you enter 72 ppi you should get the size you expected. But that won't be enough to print.
BTW: the workflow of making a screenshot and converting your image to and fro maybe harmful to printing results.

How can I batch process 4 diff image sizes from 1 master?

Hi there
What I would like to do is create 4 separate image files of varying sizes (large, medium, small & extra small) from one master image. I would need the ability to name each file individually too, ie. picture1_large, picture1_medium etc
I have a few thousand files to process so ideally a solution that I didnt have to keep checking on would be preferable. I know I can create a batch process for one size but its creating the four diff sizes in a batch which im finding difficult to work out.
any help would be much appreciated
Jim

Simply drag the entire folder through Bridge—or even individual files—the invisible xmp files containing your adjustments will automatically and invisibly travel along with the image files, as long as you do it within Bridge, not through the OS.
Otherwise, you would need to set your Mac OS to always make invisible files visible, and you don't want that hassle.
Just use Bridge to move files around or to copy them to a new folder.
Incidentally, there's a dedicated Adobe Bridge forum:
http://forums.adobe.com/community/bridge?view=discussions

Question about image size from app developer

Hi
I am developing an android app that prints through eprint, so this is directed to HP Staff
What is the correct size of a jpg image to take up the whole page?
In this app, i am unable to use PDF's, so i want to try using a full page jpg and insert the data onto that, then send the whole page to an eprint email address.
I tried a standard 612 X 792 pixel page (72 dpi), but it only takes up alittle more than a quarter page.
i need it to be the right size for any of the eprint printers.
thanks
--Karl

1: Decrease the size as you describe.
2. Go to File>New or Ctrl N
3. Make the box 8.5x11. Make sure the other data conforms to your image.
4. Now,holding down Ctrl-Shift, Drag the image to the new box and release the mouse. Your image will be centered in the box.
Note: there may be a method to do this including any adjustment layers, but I usually only do this as a last step, flattening a copy of the working file.

Uploading an image file from client to a db column

hi,
I need help with the subject above,
I downloaded the webUtil package but I don't know
how to configure it & use it..
I'm not a professional developer, I'm a student and this is for my graduation project
and I need help fast my project is due med may ..
I'm using oracle 10g DBMS and Developer
Thanks

Check these steps :
1. Download the following three folders (zip files) needed for Webutil configuration from the Internet to any Windows machine:
Webutil_demo.zip: URL: http://www.oracle.com/technology/products/forms/htdocs/webutil/webutil.htm
Click on link: WebUtil Demo
webutil_106.zip: URL: http://www.oracle.com/technology/software/products/forms/index.html
Click on link: Oracle Forms 10g WebUtil
jacob_18.zip: URL: http://www.oracle.com/technology/products/forms/htdocs/webutil/readme.html
Click on link: http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip.
2. Extract the 3 zip files to have the folders (jacob_18, webutil_106 and Webutil_demo) in your windows machine.
3. Transfer the following files from your windows machine (from the 3 folders) to the Linux machine as below:
a)
- File: frmwebutil.jar
- From folder: webutil_106\webutil_106\java
- To: $ORACLE_HOME/forms/java
- Transfer mode: must be Binary
b)
- File: jacob.jar
- From folder: jacob_18
- To: $ORACLE_HOME/forms/java
- Transfer mode: must be Binary
c)
- File: d2kwut60.dll, JNIsharedstubs.dll
- From folder: webutil_106\webutil_106\webutil
- To: $ORACLE_HOME/forms/webutil
- Transfer mode: must be Binary
d)
- File: jacob.dll
- From folder: jacob_18
- To: $ORACLE_HOME/forms/webutil
- Transfer mode: must be Binary
e)
- File: forms_base_ie.js, forms_ie.js
- From folder: webutil_106\webutil_106\java
- To: $ORACLE_HOME/forms/java
- Transfer mode: must be Binary
f)
- File: webutil.olb, webutil.pll and create_webutil_db.sql
- From folder: webutil_106\webutil_106
- To: $ORACLE_HOME/forms
- Transfer mode: must be Binary
g)
- File: WU_TEST_106.fmb
- From folder: Webutil_demo\Webutil_demo
- To: $ORACLE_HOME/forms
- Transfer mode: must be Binary
h)
- File: webutilbase.htm, webutiljini.htm, webutiljpi.htm and webutil.cfg
- From folder: webutil_106\webutil_106\server
- To: $ORACLE_HOME/forms/server
- Transfer mode: must be TEXT/ASCI
i)
- File: sign_webutil.sh
- From folder: webutil_106\webutil_106\webutil
- To: $ORACLE_HOME/forms/webutil
- Transfer mode: must be TEXT/ASCI

Differing image sizes from same stock

PPCS4 project using imported DVD footage (1440 x 1080). Processed clips - eg nested/freezeframe/effect are approx 1/4 the size of unprocessed clips, when viewed in program window and when encoded. Strangly video options > scale to frame size, corrected some to full size but not others. If scale to frame size unchked on all clips and program screen set to 75% only two freeze frames noticably smaller, when played in PP. No idea why only two but cud have lived with that. However when encode (264 HDTV 1440 x 1080 or 1280 v 720) again with export settings screen set at 75% and centered, once encoder window opens the visual area is approx 1/4 of the encoder screen and once encoded same with the player - ie large black surround
Cropping gives a sort of a soltn but the quality is down.
All suggestions welcome

Man I just didn't understand any of that question.

When I export from Lr to CS3 my image size is 8x12 roughly, why?

I shoot RAW with a 5d mark2 I export from lr to cs3 in my workflow. I am wanting to create a gallery wrap at an image size of 24x36, when I go to create my negative space my exported image size from Lr is only 8x12, why would that be? I don't know what to do or how to make my image larger without loosing quality? I have never noticed this before? Why is it doing this now?

It will be the settings in your export menu.
clsmithphoto wrote:
I shoot RAW with a 5d mark2 I export from lr to cs3 in my workflow. I am wanting to create a gallery wrap at an image size of 24x36, when I go to create my negative space my exported image size from Lr is only 8x12, why would that be? I don't know what to do or how to make my image larger without loosing quality? I have never noticed this before? Why is it doing this now?
Check this out for how to export: http://tv.adobe.com/search/?q=exporting

How to make Image/size/resolution agree with metadata resolution?

After scanning the help file a bit and searching thru this forum a bit with `metadata resolution' as search criteria, I'm still pretty confused about how it is supposed to work.. I may have never actually found the right part of the help file.
Cutting to the chase: How can I make the resolution reported by the metadata tab for resolution agree with what is reported inside photoshop at Image/size resolution. I didn't see any way to set how res is reported in bridge.
I see many pictures reported in metadata as 72 ppi for resolution and reported in photoshop as 200 pixel/inch
They do BOTH mean pixels per inch right? If so, or really even if they don't how can I get the two reports to show the same resolution?
There are too many processes that depend on knowing res in advance of opening a file for that to be so far divergent.

Jingshu Li wrote:
Some JPG or Tiff with Camera raw settings will be opened in ACR firstly when you double click them. In ACR workflow option (the bottom in the ACR dialog) the resolution value isn’t same with that in Bridge (metadata panel). If you go ahead to open the image in PS by clicking ‘Open Image’ button in ACR dialog and then check the image size from Image -> Image Size in PS, the resolution will be same with ACR (actually it is changed by ACR).
If disable ACR support for JPG and Tiff in Bridge (Open Camera Raw Preferences in Bridge and choose ‘Disable JPEG support’ or ‘Disable TIFF support’ for ‘JPEG and TIFF Handling’), JPG or TIFF files will be opened by PS directly and the resolution matches between Bridge and PS. I believe this is an ACR bug.
So what file types are you using and if they’re opened by ACR firstly in your workflow?
The files are *.jpg. But I don't see where camera raw comes in. These are common jpg files. I'm opening them by double click in bridge.
Any way I did disable jpg and tiff in the Camera Raw preferences as you suggested. At Jpeg and tiff handling, both disabled. and restared bridge.
However, I see no improvment.
For example, a file reporting 72 ppi in bridge when opened in photoshop ... Images/size resolution reports 480 pixels/inch.
There is obviously some kind of miss handling that has been done to these files for them to have such a high resolution. I suspect they may have been handled at Walgreens or Walmart... or similar since I had something very similar happen to me once when I had a bunch of pictures developed at Walgreens and they cam back with resolutions like that, when I know the camera would have given them something way less.
But I don't see how any of that should be effecting Bridges inability to get the resolution right.
Here is another example: some.jpg
It appears that bridge is showing an unusually huge file size in inches, to account for the reported 72 ppi.
Bridge:
Size: ...............1.14mb
Dimensions:.....1496x1064
Dimensions in
inches ............20.8x26.7
Resolution: .....72 ppi
===========================
Photoshop:
pixels
Width 1496
height 2064
Document size
inches
width 4.987
height 6.88
Resolution 300
Do you have further suggestions?

I am still having problems understanding changes in image size

Howdy
I hope someone can help me. I have an old record album (one that has never come out on CD). I recently recorded the album over to a CD recorder. Okay great, I now have the CD. Years ago I gave a copy of the LP to my brother. I want to give him a copy of the CD with the album cover as artwork. Okay I have a commercial scanner at my place of work so I can scan the album cover which is roughly 12 inches by 12 inches. I scanned it at 200 dpi. So I end up with this large image. CD covers are around 4 3/4 inches. I played around with the image using another program and thought I'd changed it to this size but it never worked out right. Now I have been trying to play around with the image in Adobe and just can't quite understand this. To try to understand this better I actually scanned a cd cover at 200 dpi and then opened this image in adobe. The size of the image says its 4 3/4 by 4 3/4 but it doesn't look like it would printout that way. It looks like it would print out much larger. I saw somewhere in this forum that adobe is set to something like 72 ppi and I think I sort of understand that but I guess what I need help with is the process by which I convert an image of the album cover which is roughly 12x12 to be 4 3/4 x 4 3/4 without losing too much resolution quality. Can someone walk me through this? I guess I don't understand how to resize the larger image to 4 3/4 by 4 3/4 inches so that it actually prints out at that size. This is driving me crazy!! Thanks.
Joe

Joe,
Try not to get too bogged down different resolutions - not least because monitors display images at a different resolution to printers.
The good news is that you have a scanned image that is larger than you require which means downsizing it is doing to be easier.
Go to the 'Image' menu, select the 'Resize' option, select 'Image Size' from the sub-menu.
A dialogue box should appear on screen. At the top is a section entitled 'Pixel Dimensions'. No need to worry about these, but for a 12" x 12" image at 200ppi, the measurments on my screen show an overall file size of 16.5 MB with the width and height each showing 2400 pixels.
Focus on the section below it entitled 'Document Size'. Hopefully it displays the sizes you have mentioned: 12" wide, 12" high, 200 PPI resolution.
Firstly, click in the box where the units of measurement are given and change them to 'cm' (CDs are 12 centimetres square unlike their predecessor LPs that were 12 inches square). The corresponding values in the sizes will change automatically to reflect your new choice of measurement. On my screen, where it did show 12 inches, it now shows 30.48 cm. Click on the figure alongside width and change this to 12. If the 'Constrain Proportions' option is ticked, the height will change automatically too. You'll notice that the resolution increases automatically from 200 to 508. Just click OK and your image size has been changed.
Best Wishes
Mark

How to know the image size and coding of our j2me project

Hi,
I have developed a game and i did the obfuscation. My jar size is now 170KB. How can differentiate the coding size and the image size from the total jar size.
If i asked any thing wrongly, please forgive me and clarify my doubt.
I am looking forward to meet ur queries if any.
Thanks and Regards,
Hithayath.

<?xml version="1.0" encoding="UTF-8"?>

<project xmlns:projdeps2="http://www.netbeans.org/ns/ant-project-references/2" basedir=".." default="jar" name="-impl">
<target name="pre-init"/>
<target depends="pre-init" name="pre-load-properties">
<property file="nbproject/private/private.properties"/>
<property value="0.0.1" name="deployment.number"/>
<property value="000002" name="deployment.counter"/>
<property location="${netbeans.user}/build.properties" name="user.properties.file"/>
<available file="${user.properties.file}" property="user.properties.file.exists"/>
</target>
<target unless="config.active" depends="pre-load-properties" name="exists.config.active">
<echo message="Active configuration (config.active property) is not set - using default." level="warning"/>
<property name="config.active" value=""/>
</target>
<target unless="netbeans.user" depends="pre-load-properties" name="exists.netbeans.user">
<echo message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically." level="warning"/>
</target>
<target unless="user.properties.file.exists" depends="pre-load-properties" name="exists.user.properties.file">
<echo message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)." level="warning"/>
</target>
<target depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file" name="load-properties">
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
<containsregex pattern="^platform.active=|^deployment.method="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="${user.properties.file}">
<filterchain>
<replaceregex replace="platform." pattern="^platforms\.${platform.active}\."/>
<replaceregex replace="deployment.scriptfile=" pattern="^deployment\.${deployment.method}\.scriptfile="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
</filterchain>
</loadproperties>
</target>
<target unless="platform.active" depends="load-properties" name="exists.platform.active">
<echo message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)." level="warning"/>
</target>
<target depends="load-properties" unless="platform.configuration" name="exists.platform.configuration">
<echo message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration." level="warning"/>
<property value="CLDC-1.0" name="platform.configuration"/>
</target>
<target depends="load-properties" unless="platform.profile" name="exists.platform.profile">
<echo message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile." level="warning"/>
<property value="MIDP-1.0" name="platform.profile"/>
</target>
<target depends="pre-init,load-properties,exists.platform.active,exists.platform.configuration,exists.platform.profile" name="init">
<fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-modules-kjava-antext.jar file in the IDE installation directory.</fail>
<fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
<fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
<fail unless="src.dir">Must set src.dir</fail>
<fail unless="build.dir">Must set build.dir</fail>
<fail unless="build.classes.dir">Must set build.classes.dir</fail>
<fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
<fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<fail unless="dist.dir">Must set dist.dir</fail>
<fail unless="dist.jar">Must set dist.jar</fail>
<fail unless="dist.jad">Must set dist.jad</fail>
<fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
<fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
<fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
<property value="" name="abilities"/>
<property value="" name="obfuscator.classpath"/>
<property value="" name="kjava.configuration"/>
<property value="UEI-1.0" name="platform.type"/>
<property value="" name="platform.device"/>
<property value="0" name="obfuscation.level"/>
<property value="false" name="sign.enabled"/>
<property value="file://" name="dist.jad.url"/>
<property value="1.3" name="javac.source"/>
<property value="1.1" name="javac.target"/>
<property value="${file.encoding}" name="javac.encoding"/>
<condition property="no.deps">
<istrue value="${no.dependencies}"/>
</condition>
<condition property="no.javadoc.preview">
<isfalse value="${javadoc.preview}"/>
</condition>
<condition value="${filter.excludes},**/*Test.java,**/test,**/test/**" property="filter.excludes.evaluated">
<istrue value="${filter.exclude.tests}"/>
</condition>
<property value="${filter.excludes}" name="filter.excludes.evaluated"/>
<condition value="" property="evaluated.run.security.domain">
<isfalse value="${run.use.security.domain}"/>
</condition>
<condition value="" property="deployment.do.override.jarurl">
<istrue value="${deployment.override.jarurl}"/>
</condition>
<property value="${run.security.domain}" name="evaluated.run.security.domain"/>
<taskdef resource="org/netbeans/modules/kjava/antext/defs.properties">
<classpath>
<pathelement path="${libs.j2me_ant_ext.classpath}"/>
</classpath>
</taskdef>
<uptodate targetfile="${preprocessed.dir}/.timestamp" property="no.clean.before.build">
<srcfiles dir="nbproject">
<include name="project.properties"/>
<include name="build-impl.xml"/>
</srcfiles>
</uptodate>
<condition property="skip.deployment">
<equals trim="true" casesensitive="false" arg2="NONE" arg1="${deployment.method}"/>
</condition>
<condition property="skip-sign-keystore-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.keystore.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore.password}"/>
</not>
</and>
</or>
</condition>
<condition property="skip-sign-alias-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.alias"/>
<isset property="sign.alias.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias.password}"/>
</not>
</and>
</or>
</condition>
<antcall inheritrefs="true" inheritall="true" target="post-init"/>
</target>
<target name="post-init"/>
<target name="deps-jar" depends="init" unless="no.deps"/>
<target description="Clean project in case its meta information has changed." unless="no.clean.before.build" depends="init" name="conditional-clean">
<antcall target="do-clean" inheritall="true" inheritrefs="true"/>
</target>
<target name="pre-preprocess"/>
<target description="Preprocess project sources." depends="init,pre-preprocess,deps-jar,conditional-clean" name="preprocess">
<mkdir dir="${preprocessed.dir}"/>
<echo file="${preprocessed.dir}/.timestamp" message="ignore me"/>
<nb-prep encoding="${javac.encoding}" preprocessfor="${config.active},${abilities}" destdir="${preprocessed.dir}">
<fileset excludes="${filter.excludes.evaluated}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</nb-prep>
<antcall inheritrefs="true" inheritall="true" target="post-preprocess"/>
</target>
<target name="post-preprocess"/>
<target description="Extracts all bundled libraries." depends="init,deps-jar,conditional-clean" name="extract-libs">
<mkdir dir="${build.classes.dir}"/>
<nb-extract excludeManifest="true" dir="${build.classes.dir}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</nb-extract>
</target>
<target name="pre-compile"/>
<target description="Compile project classes." depends="init,preprocess,extract-libs,pre-compile" name="compile">
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" bootclasspath="${platform.bootclasspath}" srcdir="${preprocessed.dir}" destdir="${build.classes.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<copy todir="${build.classes.dir}">
<fileset excludes="${filter.excludes.evaluated},${build.classes.excludes}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</copy>
<antcall inheritrefs="true" inheritall="true" target="post-compile"/>
</target>
<target name="post-compile"/>
<target name="pre-compile-single"/>
<target description="Compile selected project classes." depends="init,preprocess,extract-libs,pre-compile-single" name="compile-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" includes="${javac.includes}" bootclasspath="${platform.bootclasspath}" destdir="${build.classes.dir}" srcdir="${preprocessed.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<antcall inheritrefs="true" inheritall="true" target="post-compile-single"/>
</target>
<target name="post-compile-single"/>
<target depends="init" name="create-jad">
<mkdir dir="${build.dir}"/>
<dirname property="dist.jad.dir" file="${dist.dir}/${dist.jad}"/>
<mkdir dir="${dist.jad.dir}"/>
<condition value="${manifest.apipermissions}" property="evaluated.manifest.apipermissions">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition value="${manifest.pushregistry}" property="evaluated.manifest.pushregistry">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition property="contains.manifest.configuration">
<contains string="${manifest.others}" substring="MicroEdition-Configuration: "/>
</condition>
<condition property="contains.manifest.profile">
<contains string="${manifest.others}" substring="MicroEdition-Profile: "/>
</condition>
<property name="evaluated.manifest.apipermissions" value=""/>
<property name="evaluated.manifest.pushregistry" value=""/>
<property value="" name="manifest.jad"/>
<property value="" name="manifest.manifest"/>
<echo file="${dist.dir}/${dist.jad}">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</echo>
<echo file="${build.dir}/manifest.mf">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</echo>
<antcall inheritrefs="true" inheritall="true" target="add-configuration"/>
<antcall inheritrefs="true" inheritall="true" target="add-profile"/>
</target>
<target unless="contains.manifest.configuration" name="add-configuration">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Configuration: ${platform.configuration}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Configuration: ${platform.configuration}
</echo>
</target>
<target unless="contains.manifest.profile" name="add-profile">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Profile: ${platform.profile}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Profile: ${platform.profile}
</echo>
</target>
<target name="pre-obfuscate"/>
<target description="Up-to-date check before obfuscation." depends="init,compile" name="obfuscate-check">
<uptodate targetfile="${obfuscator.destjar}" property="no.obfusc">
<srcfiles dir="${build.classes.dir}"/>
</uptodate>
</target>
<target unless="no.obfusc" description="Obfuscate project classes." depends="init,compile,obfuscate-check,pre-obfuscate" name="obfuscate">
<dirname property="obfuscator.srcjar.dir" file="${obfuscator.srcjar}"/>
<dirname property="obfuscator.destjar.dir" file="${obfuscator.destjar}"/>
<mkdir dir="${obfuscator.srcjar.dir}"/>
<mkdir dir="${obfuscator.destjar.dir}"/>
<jar basedir="${build.classes.dir}" jarfile="${obfuscator.srcjar}"/>
<property value="" name="obfuscation.custom"/>
<nb-obfuscate extraScript="${obfuscation.custom}" obfuscationLevel="${obfuscation.level}" classpath="${platform.bootclasspath}" obfuscatorclasspath="${obfuscator.classpath}" destjar="${obfuscator.destjar}" srcjar="${obfuscator.srcjar}"/>
<mkdir dir="${obfuscated.classes.dir}"/>
<unjar dest="${obfuscated.classes.dir}" src="${obfuscator.destjar}"/>
<antcall inheritrefs="true" inheritall="true" target="post-obfuscate"/>
</target>
<target name="post-obfuscate"/>
<target name="pre-preverify"/>
<target description="Preverify project classes." depends="init,compile,obfuscate,pre-preverify" name="preverify">
<mkdir dir="${preverify.classes.dir}"/>
<nb-preverify commandline="${platform.preverifycommandline}" platformtype="${platform.type}" platformhome="${platform.home}" configuration="${platform.configuration}" classpath="${platform.bootclasspath}" destdir="${preverify.classes.dir}" srcdir="${obfuscated.classes.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-preverify"/>
</target>
<target name="post-preverify"/>
<target unless="skip-sign-keystore-password-input" if="netbeans.home" depends="init" name="set-keystore-password">
<nb-enter-password passwordproperty="sign.keystore.password" keystore="${sign.keystore}"/>
</target>
<target unless="skip-sign-alias-password-input" if="netbeans.home" depends="init" name="set-alias-password">
<nb-enter-password passwordproperty="sign.alias.password" keyalias="${sign.alias}" keystore="${sign.keystore}"/>
</target>
<target name="pre-jar"/>
<target description="Build jar and application descriptor." depends="init,preverify,create-jad,set-keystore-password,set-alias-password,pre-jar" name="jar">
<dirname property="dist.jar.dir" file="${dist.dir}/${dist.jar}"/>
<mkdir dir="${dist.jar.dir}"/>
<jar manifest="${build.dir}/manifest.mf" jarfile="${dist.dir}/${dist.jar}" compress="${jar.compress}">
<fileset dir="${preverify.classes.dir}"/>
<fileset dir="${obfuscated.classes.dir}">
<exclude name="**/*.class"/>
</fileset>
</jar>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${dist.jar}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
<antcall inheritrefs="true" inheritall="true" target="post-jar"/>
</target>
<target name="post-jar"/>
<target description="Rebuild the application." depends="init,clean,jar" name="rebuild"/>
<target description="Run MIDlet suite." depends="init,jar" name="run">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target description="Quick Run already built MIDlet suite." depends="init" name="run-no-build">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target depends="init,clean,jar" description="Debug project." name="debug">
<delete file="${preprocessed.dir}/.timestamp"/>
<parallel>
<nb-run commandline="${platform.debugcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" jadfile="${dist.dir}/${dist.jad}" device="${platform.device}" platformhome="${platform.home}" platformtype="${platform.type}" debuggeraddressproperty="jpda.port" debugserver="true" debugsuspend="true" debug="true"/>
<sequential>
<sleep seconds="5"/>
<antcall target="nbdebug"/>
</sequential>
</parallel>
</target>
<target if="netbeans.home" description="Start NetBeans debugger" name="nbdebug">
<nb-kjava-debug period="2000" timeout="30000" name="${app.codename}" address="${jpda.port}">
<bootclasspath>
<path path="${platform.bootclasspath}"/>
</bootclasspath>
<classpath>
<path path="${dist.dir}/${dist.jar}"/>
</classpath>
<sourcepath>
<path path="${src.dir}"/>
<path path="${libs.src.path}"/>
</sourcepath>
</nb-kjava-debug>
</target>
<target depends="init,preprocess" name="javadoc">
<mkdir dir="${dist.javadoc.dir}"/>
<javadoc private="${javadoc.private}" windowtitle="${javadoc.windowtitle}" version="${javadoc.version}" author="${javadoc.author}" splitindex="${javadoc.splitindex}" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" use="${javadoc.use}" notree="${javadoc.notree}" bootclasspath="${platform.bootclasspath}" destdir="${dist.javadoc.dir}" source="${javac.source}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
<sourcepath>
<pathelement location="${preprocessed.dir}"/>
</sourcepath>
<fileset dir="${preprocessed.dir}"/>
</javadoc>
<antcall target="browse-javadoc"/>
</target>
<target unless="no.javadoc.preview" if="netbeans.home" name="browse-javadoc">
<nbbrowse file="${dist.javadoc.dir}/index.html"/>
</target>
<target name="pre-clean"/>
<target description="Clean build products." if="no.clean.before.build" depends="init,conditional-clean" name="clean">
<antcall inheritrefs="true" inheritall="true" target="do-clean"/>
</target>
<target depends="pre-clean" name="do-clean">
<delete dir="${preprocessed.dir}"/>
<delete dir="${build.classes.dir}"/>
<delete file="${obfuscator.srcjar}"/>
<delete file="${obfuscator.destjar}"/>
<delete dir="${obfuscated.classes.dir}"/>
<delete dir="${preverify.classes.dir}"/>
<delete file="${build.dir}/manifest.mf"/>
<delete file="${dist.dir}/${dist.jar}"/>
<delete file="${dist.dir}/${dist.jad}"/>
<delete dir="${dist.javadoc.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-clean"/>
</target>
<target name="post-clean"/>
<target name="pre-deploy"/>
<target if="deployment.do.override.jarurl" depends="init,jar,pre-deploy" name="override-jad">
<property value="${dist.jar}" name="deployment.jarurl"/>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${deployment.jarurl}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target unless="skip.deployment" if="deployment.method" depends="init,jar,override-jad,pre-deploy" name="deploy">
<fail unless="deployment.scriptfile">Property deployment.${deployment.method}.scriptfile not set. The property should point to an Ant script providing ${deployment.method} deployment.</fail>
<ant inheritrefs="true" inheritall="true" antfile="${deployment.scriptfile}">
<property location="${dist.dir}/${dist.jad}" name="deployment.jad"/>
<property location="${dist.dir}/${dist.jar}" name="deployment.jar"/>
</ant>
<propertyfile file="nbproject/private/private.properties">
<entry pattern="000000" default="2" operation="+" type="int" key="deployment.counter"/>
<entry value="${deployment.counter}" key="deployment.number"/>
</propertyfile>
<replaceregexp replace="deployment.number=\2\3.\5\6.\8\9" match="^deployment.number=[0-9]*(0|([1-9]))([0-9])(0|([1-9]))([0-9])(0|([1-9]))([0-9])$" file="nbproject/private/private.properties" byline="true"/>
<antcall inheritrefs="true" inheritall="true" target="post-deploy"/>
</target>
<target name="post-deploy"/>
<target name="for-all-configs">
<antcall inheritrefs="false" inheritall="false" target="${target.to.call}">
<param value="" name="config.active"/>
</antcall>
</target>
<target name="jar-all">
<antcall target="for-all-configs">
<param value="jar" name="target.to.call"/>
</antcall>
</target>
<target name="javadoc-all">
<antcall target="for-all-configs">
<param value="javadoc" name="target.to.call"/>
</antcall>
</target>
<target name="deploy-all">
<antcall target="for-all-configs">
<param value="deploy" name="target.to.call"/>
</antcall>
</target>
<target name="rebuild-all">
<antcall target="for-all-configs">
<param value="rebuild" name="target.to.call"/>
</antcall>
</target>
<target depends="load-properties" name="clean-all">
<fail unless="build.root.dir">Property build.root.dir is not set. By default its value should be \"build\".</fail>
<fail unless="dist.root.dir">Property dist.root.dir is not set. By default its value should be \"dist\".</fail>
<delete dir="${build.root.dir}"/>
<delete dir="${dist.root.dir}"/>
<antcall target="for-all-configs">
<param value="clean" name="target.to.call"/>
</antcall>
</target>
</project>
I have pasted the content of that file, please do the needs....

Why jpeg file exported from Aperture with 300 dpi's it opens with 72 dpi's on PS ( image size)? I've tried several combinations and all give different results. And I am confused on what is the best workflow for me.

Ok.
My workflow is
RAW > Aperture Library > export jpeg high resolution 300 dpi's > one file on PS > edit > Save us jpeg. The I realised that files from PS were being save in a smaller size from the ones exported form Aperture. That is when I went o see <image size> on PS and files were with 72.
Since ten I've trying different things
1. Aperture > export as PSD > open on PS > edit > Save us jpeg = small file (around 15 MB)
2. Aperture > export as jpeg high resolution 300 dpi's > open on PS > CHANGE dpi's to 300 on <image size> edit > Save us jpeg = big file (Huge, actually)
What am I doing wrong? Would someone give me guidance and tell me what is the best workflow, considering I edit photos to deliver to my clients and I shall give them 300 dpi's.
Thank you

This is a known Aperture issue: Problem with Aperture 3.6 preset exports. | Apple Support Communities
Benjamin

Image size from clients

Similar Messages

Maybe you are looking for