Image size increased extremely after adding updates - common cleanup methods don't work

I am going to re-work one of my WES7-Images, and besides that I intended to include the latest updates - over 300 in number (that's the penalty for the "never touch a running system" philosophy :-).
Well then, I created a configuration set with all the updates and applied it to the target using DISM's "/apply-unattend" command. After the updates were installed I noticed that usage of my C: driver has grown by 4GB (from 5GB to 9GB) - that's
a lot when taking in account that the configuration set was only ~800MB . I think that everybody here knows about the limitied resources in an Embedded Device...
I tried with both "cleamngr" and "dism /cleanup-image", but none of them could reduce this maniac overhead. Is there another way to reduce the disk usage, or is my update method not correct?
Thanks in before for any help.
Best regards,
Willi K.

I gave it a try, same result - immediately after WES7 setup has completed, ~8.4GB used on C: drive. Neither cleanmgr.exe nor dism's cleanup-image option did take any effect (dism tells that no service pack backup files were found).

Similar Messages

My iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

my iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

Hello ole-gunnar,
Thanks for using Apple Support Communities.
If your iPhone is unresponsive after updating your iOS version, then I'd like you to please follow the troubleshooting below.
If you see a black screen
You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on.
You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
Restart your device.
If it still doesn't respond, or if it doesn't turn back on, reset your device.
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Cheers,
Alex H.

After updating to Yosemite remote don't work on iMac

after updating to Yosemite remote don't work on iMac

No, the versions of iPhoto on the iPad and on OS X are totally different.
What Apple ID are you using for the Mac App Store? Who else has access to that Apple ID, or what possible other Apple IDs could be in use? It's possible you'll need to purchase iPhoto to get the upgrade, though I'd think Software Update should offer you the correct version.

So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
Cannot receive any signal "searching" constantly.
Turns off as soon as removed from usb ... wont stay on connected to laptop!
HELP!

The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
Hardware can fail - it happens, which is why there is a one year warranty.

HT4623 my iphone wont accept my sim after the update , and so it don,t complet turning on

my iphone wont accept my sim after the update , and so it don,t complet turning on .

It hasnt been jailbroken has it?

After iOS5 update apps blink and don't open and music content is gone and won't sync onto iPod

After iOS5 update apps blink and don't open after trying to select them, and the music content was completely gone! Help!

See the following:
I updated my ipad 2 to ios5 and now apps won't open they just blink. What should i do?
Just updated iphone4 to ios5, now apps won't open, they blink once but won't run
When you look at the storage usage of the iPod in iTunes (the colored bargraph) , how much is in the "other" category? If very large yu will have to restore you riPod to get it down to is normal less than about 1/2 GB.

Problem When Take Dump - Image Size Increase

Dear developers
I Am Developing An E-Archive Program Using Oracle Developer 6i Based On Oracle 9i (Intermedia - Ordimage Column To Save Document Image ) .
And I Have A Problem With The Size Of The Dump File Whenever I Try To Take A Backup For The Database The File Size Is Very Huge.
The Origin Of That Is The Increase Of The Images Size After Have Been Saved On The Table ( If The Image Is About 12 kb On Hard Disk , Its Size Become 100 kb At The Database - I Used Database Studio To Know The Increase At The Table space - The Table Which Have the Images Have Its Owen Table space ).
Did Any One Know Why That Happen ? And How To Mange That Increase Of Size? How To Make The Dump File With The Minimum Size ?
Thanks
Bassem Halawa

Have you followed the performace suggestions in the interMedia documentation? I don't see how you could have obtained the increase you claim, but perhaps a database that is very poorly tuned for images? Or, more likely, the file size does not indicate actual disk space used, and instead indicates a extent. I will ask the performance folks if this increase is even possible.

Mailbox sizes increase dramatically after migration to exchange 2013

After I migrate mailboxes from exchange 2010 mailbox to 2013, the size increases.
For example -
On exchange 2010 I run get-mailboxstatistics: TotalItemSize : 6.706 GB
On exchange 2013: TotalItemSize : 9.374 GB
Anand_N

Hi Anand,
Please note that the actual space used by the mailbox database will not increase. This only refers to the attribution of space used by each individual mailbox. Actually, this happens due to the inclusion of all item properties into quota calculations, providing
a more accurate computation of space consumed by items within their mailbox. However, you can adjust mailbox size and increase mailbox quota by 40% before moving.
You can follow below cmdlet in order to increase "ProhibitSendQuota" value for all users that are not using the database quota defaults:
Get-Mailbox -ResultSize Unlimited -Filter {UseDatabaseQuotaDefaults -eq $False} |
Where {$_.ProhibitSendQuota -ne "unlimited"} | ForEach {Set-Mailbox $_ -ProhibitSendQuota "$($($_.ProhibitSendQuota).Value.ToMB() * 1.4)MB" -WhatIf}
You can have a look on this link to prevent the cause :
Mailbox migration from 2010 to 2013
Hope, this will be helpful for you.

File size increases dramatically after digital signature with Acrobat X

I signed a PDF file using Acrobat X.
File size of unsigned document: 200 k
File size of signed document: 3200 k (more than ten times bigger)
Any idea?
BR
Harald

Finally I found the solution.
The file size increase is a result of the embedded information used for long-term signature validation.
If you do not need this feature, you can turn it off:
Preferences > Security > Advanced Preferences > Creation tab
disable "Include Signature’s Revocation"
Help page: http://help.adobe.com/en_US/acrobat/X/pro/using/WS934c23d7cc8877da1172e0811fde233c98-8000. html
BR
Harald

After downloading updates in C5 camera raw stopped working. I am trying to download DNG CONVERTOR but when I press 'download' it just times out.

After downloading updates in C5, camera rawstopped working. I am trying to download DNG CONVERTOR but when I press 'Download' it just times out. Is Photoshop having problems as I have tried for three days now.

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

After the update the home sharing doesn't work anymore

Last night I had an update from my Apple TV. After I updated it, the home sharing doesn't work anymore on any device. Not on my iPhone, iTunes, iPad, nothing. I double checked every setting and this isn't the problem. I have the newest version of iTunes. Please help!

Hello Roossx2,
Thanks for using Apple Support Communities.
For more information, take a look at:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Have a nice day,
Mario

After software update, icons bounce, apps don't load

I recently returned to my iMac after a three-week absence and all was working normally. I ran software update but didn't take much notice of what was being upgraded. However, I now have 10.6.2 and everything is up to date. However, after rebooting a find that a large number of applications will not load. The applications bounce for a few moments but nothing happens. iCal, Address run normally but almost everything else, including iLife apps, refuse to load.
I've done the usual test, including repairing permissions and running Disk Warrior to make sure everything is ok. At the back of my mind I think I've heard of this problem before but cannot think where. Anyone have any ideas of what might happen.
Note: I ran the same updates on my MacBook Pro and MacBook Air and everything is running normally. The problem is confined to the iMac.

Hmmm, I must be looking with my eyes closed, I cannot find the button to make my own thread. So I'll just hijack this one for the time being :P
I have a similar to Michael. I updated Safari to 4.0.4 last night and not long after booting up and using Safari, and even FF by itself after a while the pages don't display properly and the screen saver stops, system freezes (about half a dozen times now). Dock icons go all weird. I did repair permissions... nothing. I just reset PRAM, worked ok with some problems, but it has just totally froze again.
Reinstall?

After new update my Wi-Fi won't work!!!

After I updated my macbook pro to Security update 2015-003 the wify won't work... it says: "No Hardware Installed"
can any one help me..!!! now I'm using my iPhone USB data... <-- my only way to stay online!!
my mac is MacBook Pro 13" Mid 2012, OS X Yosemite 10.10.2

Cant give an exact reason but heres the basic ts'ing for that sort of issue:
http://support.apple.com/kb/TS1398
I'd say reset network settings and restart the router, see if it still occurs. If not backup and restore.

After my update in iOS5 i don΄t have my contacts in the Outlook but when i open that program i can see icloud and there are my contacts how can i change that

After my update to ios5 i cant see my contacts in the Outlook Express but when i open this program i can find my contacts in icloud only ....how can i put them back.

iTunes does not sync with Outlook Express.

HT1414 after i update my iphone it wasn"t work

my iphone stop working after i update the ios and i loss all the info in my iphone.how can i fix this problem ?please

try using a diff computer
if you can't try creating new user account on that computer
if none works then your looking at a hardware condition... hope your warranty is still valid

Image size increased extremely after adding updates - common cleanup methods don't work

Similar Messages

Maybe you are looking for