Image size locks system

When I select Image and them image size the cursor changed to a double square and I can't do anything .... why is that?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

PS 6 locks up when I try to use the image size tool

My system is Windows 8.1 64 bit
All the other tools seem to be working OK.
When I try to use the image size tool PS just locks up and the only way to exit the program is using Task Manager??
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 3193 MHz
Built-in memory: 8098 MB
Free memory: 5146 MB
Memory available to Photoshop: 7079 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 960/PCIe/SSE2
Display: 2
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Display: 1
Display Bounds:= top: 0, left: -3840, bottom: 2160, right: 0
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 960
OpenCL Unavailable
Driver Version: 9.18.13.4788
Driver Date: 20150313000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 3840 x 2160 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 960
Video Card Memory: 2048 MB
Video Rect Texture Size: 16384
Serial number: 92628972888245698235
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Owner\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 111.8G, 37.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/06/26-12:17:19   4.0.95   66.510504
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0.1 (13.0.1.3 x001)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0.1 (13.0.1.3 x001)
   Bas Relief 13.0
   BMP 13.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0.1 (13.0.1.3 x001)
   Clouds 13.0.1 (13.0.1.3 x001)
   Collada 13.0.1 (13.0.1.3 x001)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0.1 (13.0.1.3 x001)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0.1 (13.0.1.3 x001)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0.1 (13.0.1.3 x001)
   Embed Watermark 4.0
   Entropy 13.0.1 (13.0.1.3 x001)
   Extrude 13.0
   FastCore Routines 13.0.1 (13.0.1.3 x001)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0.1 (13.0.1.3 x001)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0.1 (13.0.1.3 x001)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0.1 (13.0.1.3 x001)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0.1 (13.0.1.3 x001)
   Maximum 13.0.1 (13.0.1.3 x001)
   Mean 13.0.1 (13.0.1.3 x001)
   Measurement Core 13.0.1 (13.0.1.3 x001)
   Median 13.0.1 (13.0.1.3 x001)
   Mezzotint 13.0
   Minimum 13.0.1 (13.0.1.3 x001)
   MMXCore Routines 13.0.1 (13.0.1.3 x001)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0.1 (13.0.1.3 x001)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0.1 (13.0.1.3 x001)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0.1 (13.0.1.3 x001)
   Photocopy 13.0
   Photoshop 3D Engine 13.0.1 (13.0.1.3 x001)
   Picture Package Filter 13.0.1 (13.0.1.3 x001)
   Pinch 13.0
   Pixar 13.0.1 (13.0.1.3 x001)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0.1 (13.0.1.3 x001)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0.1 (13.0.1.3 x001)
   Range 13.0.1 (13.0.1.3 x001)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0.1
   Shear 13.0
   Skewness 13.0.1 (13.0.1.3 x001)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0.1 (13.0.1.3 x001)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0.1 (13.0.1.3 x001)
   Sumi-e 13.0
   Summation 13.0.1 (13.0.1.3 x001)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0.1 (13.0.1.3 x001)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0.1 (13.0.1.3 x001)
   Variations 13.0.1 (13.0.1.3 x001)
   Viveza 2 2.1.20.486
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0.1 (13.0.1.3 x001)
   WIA Support 13.0.1 (13.0.1.3 x001)
   Wind 13.0
   Wireless Bitmap 13.0.1 (13.0.1.3 x001)
   ZigZag 13.0
Optional and third party plug-ins:
   Analog Efex Pro 2 2.0.8.486
   BackgroundFilter 2.2.20.486
   Camera Raw 9.0
   Camera Raw Filter 9.0
   Color Efex Pro 4 4.3.20.486
   Dfine 2 2.2.20.486
   FineStructuresFilter 2.2.20.486
   HDR Efex Pro 2 2.2.20.486
   Hidden NO VERSION
   HotPixelsFilter 2.2.20.486
   Merge to HDR Efex Pro 2 2.2.20.486
   Nik Collection Selective Tool 2.1.25.486
   ShadowsFilter 2.2.20.486
   Sharpener Pro 3: (1) RAW Presharpener 3.1.20.486
   Sharpener Pro 3: (2) Output Sharpener 3.1.20.486
   Silver Efex Pro 2 2.2.20.486
   SkinFilter 2.2.20.486
   SkyFilter 2.2.20.486
   StrongNoiseFilter 2.2.20.486
   Topaz Adjust 5 10.0
   Topaz BW Effects 2 10.0
   Topaz Clarity 10.0
   Topaz Clean 3 10.0
   Topaz DeJpeg 4 10.0
   Topaz DeNoise 5 10.0
   Topaz Detail 3 10.0
   Topaz InFocus 10.0
   Topaz Lens Effects 10.0
   Topaz photoFXlab 10.0
   Topaz ReMask 4 10.0
   Topaz Simplify 4 10.0
   Topaz Star Effects 10.0
Plug-ins that failed to load: NONE
Flash:
   Adobe Watermark
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

What images? What sizes? What does the system event log say?
Mylenium

Can you lock aspect ratio, define border and image size with automated BatchCropStraighten?

Hello everybody,
I need to crop and straighten a load of scanned rectangular stamps that will start as a single scanned image, and I want to lock the aspect ratio to 1:1, define the top border size (such that the the borders on the sides will be bigger than those top and bottom) and specify the output image size.
Does anybody know if this is possible using the automates BatchCropStraighten function?
Thanks,
Paul

paulsinyard wrote:
Does anybody know if this is possible using the automates BatchCropStraighten function?
I know of no BatchCropStraighten feature in Photoshop. Photoshop has a Plugin CropPhotosAuto that you access through menu File>Automate>Crop and Straighten Photos.
On my windows system its "C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\Automate\CropPhotosAuto.8li". This plug-in is designed to help you scan several image with a single scan. All the plug-in does is to look at the current active document looking for what appears to be a scanned image and to create an additional document that contain a straighten version of the image the size of the image. No files are created nothing is saved only one document is processed even if you had several scans open in Photoshop. When the Plug-in ends the current active document is the last document the plugin created.
You may be able to program a Photoshop script that would fit the create documents to some size then add canvas that would make all the documents have the same Aspect ratio and size. The borders added would be equally sizes on opposite sides top and bottom the same left and right the same. However the image aspect ration inside the borders may vary.
I created a fake scan with five simulated images. Not straight and not all rectangles and duped the document so two would be open the used File>Automate>Crop and Straighten Photos when the process finished I spread out the document so you could see all that are open in this screen capture.

Windows 7 Backup - System image includes non system disk

Hi,
I am trying out windows 7 backup, hoping at last that I won't need a 3rd party backup solution. So far so bad!
My first problem is how ridicilously slow the backup is, but this has been discussed at length elsewhere. My second problem is the backup stalls when I try to backup a folder which I know has got various bits of malware in. I am an IT pro and use the files in this folder for testing purposes. OK fair enough I guess, although I think the backup should handle this event a bit more elegantly. So I've zipped and password protected the offending files to hide them from the AV (security essentials by the way)
The final problem which I just can't understand is that when I try to create an image of my system drive, backup wants to add my D drive (which is purely a data drive) to the image. My D drive is huge and I don't want to include it in a system image. I keep my system drive lean and mean for exactly this purpose but now I can't back it up because the total size of C and D drives combined exceed the capacity of my backup drive.
I know for a fact that the D drive has no consequence to the system boooting or operating, I have disconnected it and windows boots up just fine. In computer management the D Drive is not showing up as a system drive, so why does windows think it is? And why isn't there a power user mode wher I can choose exactly what I want in a system image, I understand you're trying to make windows easy to use for the average Joe, but this lack of functionality and in depth control feels more like a Mac than windows.... and I hate macs.
So can anyone shed any light as to why my D drive is being flagged as a system disk, otherwise it's back to 3rd party solutions... AGAIN
Thanks

There is a solution.
Microsoft usually have stuff that is not documented. For example Windows server 2008 comes with a command line utility that will allow the backup (in this case a shadow copy) of any drive you wish to a backup target. The program is wbadmin.exe.
According to some Microsoft sources it doesn't exists on Windows 7 but let me assure you that it does; I use it all the time, specifically to get round the problems you have described in your posts.
I build VHD images and test them until I am happy with them and then I back them up as a system image and then rewrite them on to a system drive. I can only do this with wbadmin.exe
To backup your c: to your d: (or what ever other drive you have space on in this case we will use d:)
- Open a command prompt as Administrator
- Run the following command:
Wbadmin start backup -backupTarget:d: -include:c: -quiet
- You should get output something like this:
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Retrieving volume information...
This will back up volume System(C:) to D:.
The backup operation to D: is starting.
Creating a shadow copy of the volumes specified for backup...
Creating a backup of volume System(C:), copied (1%).
Creating a backup of volume System(C:), copied (29%).
Creating a backup of volume System(C:), copied (57%).
Creating a backup of volume System(C:), copied (79%).
Creating a backup of volume System(C:), copied (98%).
The backup of volume System(C:) successfully completed.
The backup operation successfully completed.
Summary of the backup operation:
The backup of volume System(C:) successfully completed.
That should complete the backup. It should create a WindowsImageBackup folder in the dirve you backed up to.
Restore as normal.
There is one small but very important caveat: If you have any system files or programs that are linked to the system drive on your d: drive or elsewhere you may find that when you restore your system the links are broken. it should not happen if you
have not made any changes before you restore but if you are like me who use the d: to store the bulk of the program files and just use the c: to store the system OS (on SSD... the need for speed! :) ) then you need to be careful... be warned!!
That's all folks!
Bick

Image size and mime type.. non-java guy needs help

Image size, mime type.. non-java guy needs help
Im not at all familiar with java so this is really weird for me to work out. I?ve been doing it all day (and half of yesterday).
Im trying to write a custom clodFusion tag in java that gets the width, height, size and MIME types of a given file. I?ve been trying to get it to work on the command line first. I can get the width and height but cant get the size and the MIME type.
Here is what I got
/*import com.allaire.cfx.*;*/
import java.awt.image.renderable.*;
import javax.media.jai.*;
import com.sun.media.jai.codec.*;
import java.io.*;
import java.util.*;
public class ImageInfo {
private RenderedOp image = null;
private RenderedOp result = null;
private int height = 0;
private int width = 0;
private String type = "";
private String size = "";
public void loadf(String file) throws IOException
file = "80by80.jpg";
FileSeekableStream fss = new FileSeekableStream(file);
image = JAI.create("stream", fss);
height = image.getHeight();
width = image.getWidth();
System.out.println(height + "\n");
System.out.println(width);
System.out.println(type);
public static void main(String[] args) throws IOException {
ImageInfo test = new ImageInfo();
test.loadf(args[0]);
can anyone please help me out to modify the above so I can also print the mime type and the file size to screen.
thanks for any help

any suggestions?

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)??? -And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)???
-And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian

How to set image size in d2k6i forms

I have upload an image in forms6i, in oracle apps
this code runs smoothly when images size is croped using microsoft picture manager.
and those images are not croped or size more than 50kb it shows frm-47100 can not read image file \\...........
is there any query to reduce the size of photo.
pls help me.
code is :-
DECLARE
tiff_image_dir VARCHAR2(80) :=:parameter.P_pm_photo_path;
photo_filename VARCHAR2(80);
MYEAR VARCHAR2(2);
MROLL VARCHAR2 (4);
MYEAR3 VARCHAR2 (2);
BEGIN
:System.Message_Level := '25';
MYEAR := SUBSTR(:BW_STUDENT.STU_V_YEAR,3,2);
MROLL := LPAD(:bw_student.stu_v_roll_no,4,'0') ;
MYEAR3 :=TO_NUMBER (SUBSTR(:BW_STUDENT.STU_V_YEAR,3,2))+3;
photo_filename:=tiff_image_dir||''||MYEAR||''||MROLL||''||MYEAR3||''||'.jpg';
If
nvl(photo_filename,'X')=tiff_image_dir
then
null;
else
READ_IMAGE_FILE(photo_filename, 'jpg', 'bw_student.STU_PHOTO');
end if;
END;
thanks.
Edited by: 984999 on Jan 30, 2013 12:57 AM

hi
no such a query y that corp or resize an image but u can use irfanview or acdview to resize an image
Amatu Allah

Image size changes when moving an image between Lightroom and CC.

Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
Help!...Please?

The penny will drop soon or maybe the cloud will lift.
In Lightroom all editing is undoable/nondestructive.
Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
Now when exported it can be set to export at
100pixels per inch and will end up at 60x40" when printed.
200pixels per inch will end up at 30x20"
300ppi will end at 20x13.3"
You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
Hope that helps somewhat..

Image size changes after saving and then reopening

I'm using CS6. For example I change the image size to a 4X6 and then save it. Then when I open the file it will be 7.5X5. What's the fix? Thanks for your time.

I'm using Photoshop CS6 on a Windows 7 - 64 bit system. I'm using the Image Size dialog box and saving the file as a 4X6 at 300 dpi from a psd file to a jpeg file. When I open the file it is 5X7.5 inches at 240 dpi. I've been playing with it and have just figured out that when I save the file as a psd file it stays the size I've created and it changes when I save as a jpeg file. This is change is recent. It's worked properly in the past. Thanks for your help.
Steve

Image size to fill out the IE window

Hello,
I have a view with a menu on the left and a view container on the right side.
In the view container a linked another view.
That only constist of an image. I want this image to fill out the whole space available in the IE.
if somwbody has a low monitor resultion, it should be rezised to fill out everything and if somebody has a high resultion its the same. I dont want any "scroll bars" in the IE because the picture is to big nor I want empty space because the picture is displayed smaller than the window of the IE.
I have tried everything out. I put the image in a transparent container with "stretch", i set high and width for the transparent container and the picture to 100% but nothing really works.
As soon as I set high of the image to 100% it zero pixel. But if I set an value with px, em or ex I define the size and rezising is not done. And I cant see what the option "adjust image size" really does. I cant see any difference by (un)-checking it.
Is there any way to tell an object to be exactly that size the IE has? Is webdynpro able to recognize the monitor resolution and render an object to exactly that size?
Thanks for your help!

Thanks for the quick answer!
It does not work.
I can only see a very thin horizontal like. The image gets "compressed" to about 3 pixel and the line is as long as the image is wide (so no vertical sizing as well).
I tried it with WinXP SP3 and IE8.
I tried it with WinXP SP3 and IE6.
I tried it with my own PC via VPN to make sure its no nasty setting to our company desktop and I have only Windows, Office, SAP GUI on it. Nothing else.
Always the same result. As soon as I set the height of the image to 100% I get only a thin horizontal line.
You were able to accomplish. So I tried FireFox portable - and it works!
My lesson learned is that a picture can only be re-sized to a smaller size but not expanded. Thats no problem, I could use a 1600x1200 pixel graphic and then its made smaller.
But we have to use IE because thats the companies standard and SAPs as well.
We have the application running on a NetWeaver 2004s BI 7.0 machine. No EHP1. System got latest patches 3-4 month ago.
I cant believe that the SAP machine is the problem, because FireFox renders the graphik the same as your screenshots show.
Do you have any idea what the problem could be? Or could it be some kind of customizing/parameter problem within SAP? I have the problem since over 1 year and always thought its just a bug getting solved somewhen by a patch...

Why Image Size so Big???

Hello i am very new to adobe, i am having problems creating new images. It is just too big. When i go to file new i set the width and Height to the resoloution of my screen which is 1366=height and 768=width. But my image size is 2.36Gb thats enourmous. So Whenever i try making images my Laptop goes very slow and it crashes. The only way i can get around this is if i set the resoloution to 2.5 which will dramatically drop the image size to 2.5mb or something similiar but however i think this reduces the quality of the image. here is a screen shot:
Here is a screenshot of what system i am using:
Hello i am very new to adobe, i am having problems creating new images. It is just too big. When i go to file new i set the width and Height to the resoloution of my screen which is 1366=height and 768=width. But my image size is 2.36Gb thats enourmous. So Whenever i try making images my Laptop goes very slow and it crashes. The only way i can get around this is if i set the resoloution to 2.5 which will dramatically drop the image size to 2.5mb or something similiar but however i think this reduces the quality of the image. here is a screen shot:

You can set it so that it defaults to pixels in that dialog (and others).
Go into Edit - Preferences - Units & Rulers. Change the Rulers: field to pixels.
-Noel

How to Increase disk image size of SAM

Hello,
I am trying to increase the disk image size. I am trying to increase to about 6G, but SAM just refused to load the image.
So, is there a limit in SAM about the virtual disk size? Or is it limited to the physical memory of the system?
I have read the thread http://forums.sun.com/thread.jspa?threadID=5239257&tstart=30 and http://forums.sun.com/thread.jspa?forumID=837&threadID=5286038 about enlarging the disk image.
I am using OpenSparc T2 Arch 1.2 and the int12 boot bundle. I am wondering if I should change to the sasdisk for a try.
It is strange, that I previously ran the simulator on a Solaris Express (actually 5.11), and it worked fine.
But now I changed to the Solaris 10, then it failed.
Thank you.
Jim

As it turns out, the way to make the image appear larger on the page is to edit and increase the size of the signature "box" on the pdf (under Forms > Add or Edit Fields), to considerably larger than the form might indicate. Otherwise, the signature is constrained to the just the size of the small field on the pdf. Interestingly, as soon as you do so, the signature appears "bolder", likely just because there is more of it. Thanks for your suggestions!

Every time I right-click an image in Firefox 3.6.12 to view image size info it says "Unknown (not cached)". Any ideas on why this could be happening and how I can stop it? My OS is Ubuntu 10.10. If you need any more info let me know.

Every time I right-click an image in Firefox 3.6.12 to view image size info it says "Unknown (not cached)". Any ideas on why this could be happening and how I can stop it? My OS is Ubuntu 10.10. If you need any more info let me know.

Is the disk cache and the memory cache enabled?
You can check these prefs on the about:config page.
* http://kb.mozillazine.org/browser.cache.disk.enable
* http://kb.mozillazine.org/browser.cache.memory.enable
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
Your More system details list shows two outdated Flash plugins that you should remove and update to Flash 10.1 r102 or at least remove 10.0 r45 and wait until your distribution offers a 10.1 r102 update.
# Shockwave Flash 10.0 r45
# Shockwave Flash 10.1 r85
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

How do you change image size in the title window?

I just changed operating systems to Windows 7, which meant that I had to re install Premiere Pro CS4. I am now working on a 64 bit system. Might not make any difference, but thought I would give you the specifics just in case. When I pull up the title window to add a title to my clip, the image is about the size of a postage stamp. How do I increase the size of the image in that window?

Thank you again for responding Hunt. I did find out what what was happening.
I had to reinstall the program on my computer. I just upgraded to Windows 7, and I now have a 64 bit system. When I booted up PPCS4, I assumed that my settings would be the same as they were before when I had Vista installed and didn't bother to check them when I started a new project. Well, they were not. I also added a TV tuner card to my computer. I now can watch HD TV on my computer. I suppose that it is possible that somehow PPCS4 noticed that, and set my default settings to HD, rather than NTSC DV. I just merrily went along clicking the OK button and started editing. When I start a new project now, I select NTSC DV and the Title window works just fine, and exactly the way I expect it to.
I just received Jeff Bellune's book Adobe Encore DVD 2.0 in the mail and will be totally immersed in Encore studies today. With all of his children, I don't see how he had time to write it, but I'm glad that he did. I also ordered a book entitled Designing Menus with Encore DVD. I know that it was written for an earlier version than CS4, but I will trust what you said about that. Many things are the same with some minor variations due to upgrades in the program. The basic ideas don't change, but how you accomplish them can, and usually do over time.
Terry Lee Martin
Date: Mon, 17 Aug 2009 16:04:16 -0600
From: [email protected]
To: [email protected]
Subject: how do you change image size in the title window?
Welcome to the forum.
That is an odd one. The Title should be the same Frame Size as your Project/Sequence. What is it's Frame Size? Also, are you perhaps doing a Title based on an older Template, that was done for a different Frame Size?
What happens if you choose Title>New Title>Default Still?
Good luck,
Hunt
>

Way to limit image size on uploaded images?

Hello! Is there a way as administrator that you can limit image size for uploaded images? (Like in Contribute) Thanks so much

Hello mikkiblaes,
There isn't a way to limit the size of an image that is uploaded in InContext Editing, but there is a built-in file size limitation of 2MB. As the InContext Editing Browser help states:
Once you've inserted the media element, you can resize the asset by dragging the resize handles around it, or by changing the width and height values in the Media toolbar. (Make sure the asset is selected when you do this.) To maintain width and height proportions when you resize, make sure the lock option is selected. (It's selected by default).
This type of feature has been requested a couple of times:
http://forums.adobe.com/message/991229
http://forums.adobe.com/message/1994111
And we would greatly appreciate your feedback on how you would envision this working.
Best regards,
Corey

Image size locks system

Similar Messages

Maybe you are looking for