Image spacing - will not butt up against each other

In the site i am creating, i need the shadows to butt up against the other images. I works fine on the left side, where there is only one image. But on the right, where there is 4 horizontal images for the vertical to butt up against, it keep creating this while line or space. I have tried using a table, using a grid , combining the two, i have made sure nothing has borders or spacing and I am running out of patience! Please help! Please note that it work if you are viewing in Safari, the problem is with Internet Explorer, which is the clients primary.
http://www.moogadvertising.com/multi/index.html

Hello, I looked at your page and experimented some with it. There are several things you need to do to get it work better with IE. These are my thoughts a what I had to do to get it to work.
The page really should have a doc type so it will have some standards and not put the browser in quirks mode.
You'll need style sheets for differnent browsers and coding in the head so that browsers can use the relative style sheet. Search for browser specific style sheets. MS has some html and css info at http://msdn.microsoft.com/en-us/library/aa155110.aspx
Probably should put all your styles into external style sheets.
Grids create problems, so l would not use the grids.
Make both shadows the same size dimensionally
All numbers have to add up with some adjustments just for IE, therefore the reason for separate style sheets.
It will also work as an all table layout with some attention to detail. You can see a screenshot of a table layout at
http://goodnightartanddesign.com/moog_ie7_table.html
This file will be removed in a few days and is for an example only.
If you need details, on the table layout due to the extent of changes needed, please contact me offlist using my contact form on http://goodnightartanddesign.com/contactus.html

Similar Messages

Image Capture will not recognize my Epson Workforce 615

Image Capture will not recognize my Epson Workforce 615. It would not recognize my HP 4280 either.
I can print but I cannot scan using Image Capture. Scanning through Epson scan or HPScan Pro works.
What am I doing wrong? I have searched all over the net for an answer and there does not seem to be a solution. Only other people searching for the same answer.
And no I do not want to use VueScan.
Thanks!

Thank you for your quick reply. I ran all of the updates and the software is current.
Image Capture recognizes the printer/scanner via USB but not WIFI.

Frozen rogue image on macbook air: synced iphone, was asked to download from itunes, to restart, did this. when restarted there was photo of chocolate saying 'love you'. never seen image, it will not delete, the techs at work tried too. No luck.Virus?

frozen rogue image on macbook air: synced iphone, was asked to download from itunes, to restart, did this. when restarted there was photo of chocolate saying 'love you'. never seen image, it will not delete, the techs at work tried too. No luck.Virus? any ideas?

I'm an applications developer and also run a part-time videography business. As such, I require more than 3.12GB of RAM. That is the physical limitation of a 32bit system. Pointless to stay on 32bit if you plan on having more than that much RAM.
I'm also not about to pay someone to fix my PC when I can do it myself. I was originally hoping for someone who had experienced the problem before to point me in the right direction so I didn't have to spend so much time trying to figure out what the issue was for myself.
Basically, in the end the problem was caused because right at the point in time when I chose to uninstall, and reinstall; Apple released a new version of iTunes. This version in turn had a requirement of iOS 4.2 to sync with the iPhone. This is a pretty embarrassing for Apple that they would release software reliant on other software before said software was released.
Had I realised I was downloading a newer version at the initial point of installation, this wouldn't have been an issue. I could've easily have rolled back iTunes to the previous version and gotten on with my life.
Another issue is that iTunes is not actually a 64 bit application. It masquerades as one to allow installation on the 64 bit platform.

Image Processor will not save files in CS5

I use image processor to run actions on a bulk group of image files, always worked fine in CS4. Now with CS5 the files have the action applied but Image Processor will not close the files.... that becomes a problem when I am working with a couple hundred images! It seems to save the files fine, into the Jpeg or Tiff folder it creates during the process... it just won't close the files and give me the error: "Sorry, I could not process the following files:"
I am sure this is a bug, since it works fine in CS4 and the process is exactly the same in CS5. Does anyone else have this problem? Is there anyway to fix this? It's a pain to go back to CS4 just to use the image processor.
Thanks!
Chris Kilkus
www.kilkus.com

I looked into it more and found the problem is that when the action runs Photoshop for some reason won't let the file save from the file menu (it's grayed out)... only "Save as" which obviously doesn't work in an action. Strangely, the file does actually get saved in the folder that is created by Image Processor, but since "save" is grayed out, it won't CLOSE the file. There is no reason for it to gray out "save", when I play the action one file at a time it doesn't do this, only when I use Image Processor in CS5. I really don't understand why it's doing this, I think it's just a bug that needs to get fixed. Don't have the same problem in CS4.

Was able to bluetooth one time to play scrabble on our two iPad 1's, but have not been able to do so again. Both are searchable, but are not able to find each other. Any help will be appreciated. Thanks.

Was able to bluetooth one time to play scrabble on our two iPad 1's, but have not been able to do so again. Both are searchable, but are not able to find each other. Any help will be appreciated. Thanks.

Both need to be in the lobby, and searchable at the same time. Also, if either has been paired with a keyboard or headphone since you played, go into settings, and make sure those devices are unpaired, and not interfering with the process.

Plotting 2 Columns of Data Against Each Other, Not With Time

I have several data columns, one with current, one with voltage, one with time. I am trying to make and IV curve, plotting the current and voltage against each other, preferably with the voltage as the Y axis and current as the X axis. However, every time
I try to select the two columns and scatterplot them, excel automatically makes it either a stacked graph of current with time and voltage with time, or just gives me voltage with time. How do I get excel to simply graph the two columns that I select?

Try the following:
If you have a chart with 2 series V and I both plotted on the Y axis, against 1, 2, 3, ...:
Select the chart.
On the Design tab of the ribbon, click Select Data.
Select one of the two series (it doesn't matter which).
Click Edit.
Select the text displayed in the 'Series Y values' box, and copy it (Ctrl+C).
Click Cancel.
With the same series still selected, click Remove.
Select the remaining series, then click Edit.
Click in the 'Series X values' box, then paste (Ctrl+V).
Click OK, then OK again.
If you have a chart with only one series (either V or I) plotted against 1, 2, 3, ...:
Select the chart.
On the Design tab of the ribbon, click Select Data.
Select the series.
Click Edit.
If there is anything in the 'Series X values' box, clear it.
With this box still selected, use the mouse to select the data range of cells for the other quantity you want to plot.
Click OK, then OK again.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Apple TV and iTunes not able to see each other

I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
"I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
Good luck.

HT204053 I have 2 ipads and want play against each other mba2k13 how do i do it

i have 2 ipads and want to play against each other mba2k13 how do i do it

All purchases (and their updates) are forever tied to the ID used when they were bought. You cannot erase an ID, you simply stop using it. You will have to allow your son an exclusive account if he wants to use your computer. Can you log in under your ID now ... or do you have to use his? If the latter is the case, he has clearly changed your ID to one that is his.

My kids share use my apple id for their ipods. Now I'm getting an ipad and wondering if I should get a new id (they don't want to start over). Can we share but not have to see each other's apps, contacts, etc?

My kids use my apple id for their ipods. Now I'm getting an ipad and wondering if I should get a new id (they don't want to start over). Can we share the id (my email address) but not have to see each other's apps, contacts, etc? I'd rather share I think, but don't want to create a nightmare for myself. Also, I already have a kindle app (with purchased content) for my computer - does getting a new id for itunes change my ability to access my kindle account on my ipad? Thanks!

So first I'd say that it's not a good idea to start a new apple id if you have a large purchase history. You may not transfer purchases between apple IDs. You should consider some other options listed here http://support.apple.com/kb/HE37 Primarily the option where you or your children have seperate icloud accounts/email accounts that sync their contacts apart from yours. You may use your apple ID for purchases and use a different one for icloud/email/etc.

HT204053 Good Morning, I have 2 Apple Account, will be possible to integrate each other in one account ? And if is possible, How can I do that ? Thanks, Fabio.

Good Morning, I have 2 Apple Account, will be possible to integrate each other in one account ? And if is possible, How can I do that ? Thanks, Fabio.

You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

I reset my network settings, and when I went to join my wifi network i typed in the correct password, but it will not let me join. Other iphones and devices can however....

I reset my network settings, and when I went to join my wifi network i typed in the correct password, but it will not let me join. Other iphones and devices can however....

Try rebooting the router

ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

Exactly which password are you inputting? iCloud looks for your AppleID password.

Firefox hangs and will not allow me to access other programs running when I resize a pop up window, move a pop up window, accidentally right click flash content.

Firefox hangs and will not allow me to access other programs running when I resize a pop up window, move a pop up window, accidentally right click flash content.
== This happened ==
A few times a week
== Not sure when it statrted

Hi.
When this happens, please press CTRL+SHIFT+ESC and see how much RAM and CPU Firefox is using. If they're sky high, then... Well, that kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
#run Firefox in safe-mode to disable all extensions and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. When you encounter the problems, you know you've found a problematic extension, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix you issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't do it, I'm out of ideas. Except make sure you've followed my instructions correctly.

Sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain

sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain

FIrst try a soft reset by holding down the home & sleep/wake buttons until the Apple logo appears then let go & let the iPad boot up normally.
If that doesn't help then to make sure you have a strong internet connection.
Try resetting Network Settings
Settings->General->Reset->Reset Network Settings,
You won't lose any data but will have to log back into your wifi networks.
Once logged back in and when the pop-up appears, try entering your password again.

I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?

I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?

Create a new profile as a test to check if your current profile is causing the problems. <br>
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Image spacing - will not butt up against each other

Similar Messages

Maybe you are looking for