Image stabilization not working in iMovie 9.0.7

Imported footage from Nikon V1 at 1080 30 fps. Tried to apply image stabilizaiton to some clips. iMovie analyzes clips for stabilization and the icon for stabilized clip appears and indicators for rough footage appear, but on playback, there is no difference, and the slider for stabilizaiton amount is gone from the inspector. I have stabilized clips before from other cameras, so I know what it should look like, but it apparantly doesn't work for video from this camera. And yes, I added the clips to the project before trying to view it, still no difference. Any ideas?

I posted a solution at https://discussions.apple.com/thread/2684460?threadID=2684460
cheers!
-Goya @Rochester

Similar Messages

Stabilization not working in iMovie 09

I've got a new Panasonic DMC-ZS3. I find my video to be very shaky even though stabilization is a feature of the camera (I'm starting to think that only applies to still photos). The problem is I can't get stabilization to work in iMoive 09 either. Help!
The panasonic website says it uses 1280 x 720 at 60p*2 (AVCHD Lite, SH: 17 Mbps / H: 13 Mbps / L: 9 Mbps) / 30 fps) (Motion JPEG) - the footnote for *2 states CCD output is 30p. (In the end I think that means it is 30 based on what I've read elsewhere but not sure).
The apple tip says "Camcorders that use CMOS image sensors often use a technology called a "rolling shutter." This exposes different parts of the frame at different times until the entire frame is fully exposed. If the camcorder is moved before the entire frame is fully exposed, the resulting image may appear distorted. Sometimes, video stabilization may make this distortion more apparent. Videos that show signs of distortion due to your camcorder's rolling shutter may not be suitable for use with video stabilization."
The Panasonic does use CMOS but I don't get distortion when I try to use stabilization, I get nothing.....
I apply stabilization to a clip. It says it won't apply till the clip is in the project. When I move it into the clip I see no change. Sometimes I have zoom slider in the inspector and other times there isn't one (not sure why). When I zoom to min I still have no change in stabilization.

Well thats embarassing. Sat down tonight and stabilization worked fine. Go figure. Just as Apple said, I can't use maximum stabilization or I get ghosting but its still pretty good.

Image capture not working in lion

Well! After 10 years or so of OS X my Kodak DC 5000 no longer works in image capture after upgrading to OS X Lion. After connecting the camera and trying to import images, Image Capture says "no device connected".
Went to the loca shop and using the same camera and cable, successfully imported picts to the desktop under Snow lepard, so I know it's not the camera or cable. Been a mac user for decades! never had a problem with "plug and play" until this update!
Do I need to get a card reader now? New camera? Not happening as long as this one works(ed). Already lost Photoshop, but didn't mind as I bought Pixelmator. However, the Image Capture not working is a showstopper. Is this Apple's version of Vista? Help please!

Yes, I have iPhoto 9.1.5, I also used the prefs and this still is not working. The upgrade to OS X Lion broke my driver and I am not able to do transfer any pics from the camera.
I assume I will now need to buy a card reader.

The 'share' feature is not working in iMovie...?

The 'share' button does absolutely nothing. I went through the same upgrade on my daughters Mac (Mavericks etc), and it works perfectly well on hers. Does this mean I should re-install iMovie? If so, how on earth to do I unravell the mystery of achieving that?

I have the same problem. The 'share' feature is not working in iMovie...?
I deleted iMovie from the Applications folder and emptied the Trash. But the App Store still shows iMovie as "Installed" so it won't reinstall. What else should I try?
Why has Apple not issued a fix for the "Share" bug? It means that iMovie 10.0 is unusable. Little by little the quality of Apple products is sliding downhill.

Save Panel Image / Screen Image does not work as an Executable

The Save Panel Image / Screen Image does not work as an Executable. It looks like there is a conflict with the Path, since the Screen_Image.exe is launched as Screen_Image.vi. I've tried this function both ways with the path name change Screen_Image.exe AND Screen_Image.vi.

Any chance you might be able to post some code illustrating what you are talking about?
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Microphone not working on imovie HD

Hey,
I'm doing a stop motion animation, but my internal microphone has seemed to stop working on my imovie. It has worked before because I only wanted certain sections of a song to be playing whilst the film was going, but now it doesn't seem to want to work, I have rebooted, and downloaded the software again (because i originally had imovie '08) but it still isn't working!
If I cant solve that dilemma does anyone know how to cut songs on imovie, is it even possible? So only say 30 seconds of the song is actually playing
Thanks!

Hi
If You have a clip with a song. Cutting the clip will also cut the audio.
Extracting audio makes an audio copy on one of the audio tracks and mutes the audio on the clip.
This extracted audio can be cut in the same way as a video clip [cmd-T] and at Playhead.
If the microphon stops working I would start with:
• Under Apple left top on menu - down to system prefs - sound/audio - cheque on audio in that
microphone is selected and that level is increased so that it indicates You testing it.
• If still not working - delete iMovie pref file - or - rather start a new user/acount, log into this and re-try.
Yours Bengt W

Image stabilization only works half the time and is not consistent

When I access image stabilization, apply, and render it. Only sometimes will it work. Help.

daveypr
It looks like you have come up with the answer to your particular situation. Great.
But, so that your experience can be of benefit to those finding your thread
a. What version of Premiere Elements are you using and on what computer operating system is it running?
b. How were you not applying the video stabilizer to the whole video clip in the first place? Or, are you suggesting
that others apply the video stabilizer to all the clips on the Timeline instead of one video clip that may really need that effect?
Thanks.
ATR

Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
If I'm in the wrong place, please do warn me.
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
...This works obviously
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
...This, however, does not work.
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1

Hi Oeren,
your steps seem basically to be correct. I have a tutorial how to do this here (in german)
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
referencing seem to be OK.
Here are two thought - the issue might be one of these ...
How did you insert the dummy image into the word document - did you do it via "insert" or
via "link to file". "Link to File" does not work - you must choose the simple "insert".
Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
Does this help ..?
Regards
-Carsten
Cloud Computing mit APEX umsetzen. Jetzt!
http://tinyurl.com/apexcloudde
SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

Image Map not working in Dreamweaver CC

I'm trying to create an image map over a jpeg but when I try to draw a rectangle over the image, a grey stroke gets placed over the image then moves with the cursor.
Here is the only code on the page. Any ideas as to why this isn't working?
<img src="/SampleImage.jpg" alt="" width="900" height="2779" style="margin: 5px; width: 649px; height: 2000px;"/>

Let me see if I have this right...
1. From Design View, you are clicking your image to select it
2. You are then selecting the Rectangle tool from the bottom left of the Properties window
3. You are then clicking and dragging on the image in Design View to create your map area
4. DW puts a grey line around the image and moves it instead of adding the image map and area tags?
Run your page for code errors at http://validator.w3.org. I can't duplicate what you describe and DW will do strange things when code errors are present, it could be an error DW doesn't know how to fix that's causing the normal image map functionality to fail.
If you have clean code and are doing what I list above and it's still not working, it may be time to clear the program cache:Deleting a corrupted cache file

Image hyperlink not working in iphone mail

Hello,
I have created an HTML email and have sent it using Outlook from a Windows PC. The HTML email contains a JPEG that has a hyperlink assigned to it. When I check my email on my iphone and touch the JPEG, it wants to download the image, but does not click to the URL. An Android phone works fine. Any suggestions as to why this is happening?
Here's a snippet of the code involved:
<td><a href="http://www.ecallis.com/Proofs/ProEnergy/powergen_2012_invitation/index.html" target="_blank"><img src="images/videostillscreen2.jpg" width="320" height="193" border="0" /></a></td>
Thanks,
Linda

I discovered this only happens in the iPhone email app when using embedded images. If the images are embedded the iPhone wants to save the image when you click on it. If the images are not embedded (i.e. somewhere on the internet) then the links work fine when clicking on the image. HTH

Image Processor Not Working

Hi,
I used the Image Processor feature to resize and save in a separate folder all the time in Bridge CS3. I recently upgraded to CS4 and I can't get the Image Processor to work. When I select the feature, it opens photoshop but nothing happens...it just opens the photoshop window but does nothing. Can anyone help? Does the feature not function in the same way for CS4? How do I properly use Image Processor in Bridge CS4? Thank you!

But all the
files that are in my home directory (Snow Leopard 10.6.5) give that error.
Do you have a beta of Snow Leopard, to my best knowledge 10.6.4 is the
latest version??
I'm going to format
the drive on Monday and restore my system from Backup and see what that does.
First try the uninstall CS5 suite using the uninstaller that is in each
application folder. Also erase your serial number from computer and run the
clean script:
http://www.adobe.com/support/contact/cs5clean.html
It is useless to reformat and after that reinstall from Back Up when you
also re install the current preferences, highly likely you will end up with
the same problem because you copied the old prefs again

Image Processor not working for me. Help!

In a nearby thread I've reached a stumbling block. Image Processor in CS4's PS is not working for me. I have a folder of psd's generated on the fly via File > Export > Data Sets as File... and now I'm trying to process those psd's to generate a JPEG of each. The only strange characteristic of the auto-generated PSD files is that there is no image preview available within the Finder. When a psd is selected the preview pane reads:
"This layered Photoshop file was not saved with a composite image"
I've verified in my Preferences > File Handling that image previews are always saved. (But I've been using PS for a long time and previews are always available with all my manually saved work.)
So here's what happens when I invoke File > Scripts > Image Processor...
In section 1 of the menu I select the source folder where the psd files reside
In section 2, I select 'Save in same location'
In section 3, I select 'Save as JPEG'
In section 4, I change nothing. No special actions. Include ICC profile is checked.
When I select run I get an error message: "Sorry, I could not process the following files:"
And then it lists what appears to be 3 lines per psd file in the source directory:
The path to the source dir
The name of the source dir
The [source_dir]/[filename.psd]
What am I doing wrong?

mrdior wrote:
I have a folder of psd's generated on the fly via File > Export > Data Sets as File... and now I'm trying to process those psd's to generate a JPEG of each. The only strange characteristic of the auto-generated PSD files is that there is no image preview available within the Finder. When a psd is selected the preview pane reads:
The part I don't understand is the "export" Part. File > Export > Data Sets as File.. on my machine is grayed out so I don't know how this feature is used. Is Export > Data Sets as File... used with CSV data sets and Photoshop variables?
Check your Photoshop preferences and make sure you have set in the file handling tab "Maximize PSD and PSB File Compatibility:" to Always using the pull down menu. If that is not your current setting try setting that to see if the exported PSD files contain composite previews. When I use save as PSD on my system I alway see Photoshop save through up a popup window stating generating composite preview image.

Image cache not working with Firefox and apex

Hi,
I'd like to cache all my images to save page rendering time and bandwidth because my images are all static and never change.
I use the John Scott's caching technique Link: [http://jes.blogs.shellprompt.net/2007/05/18/apex-delivering-pages-in-3-seconds-or-less/], in a few words this technique consists of adding a header line "Expires: date in the future" in the http response.
It works very well in IE, the images are cached and the same image can be accessed several times (within the same session or in different sessions) without issuing an http request to the server each time.
with Firefox it does not work, the same image is asked again and again to the server (i'm using FF 3.5 and APEX 3.2).
- Is it a date format problem? no, because when i type about:cache in FF, i can find my image in the cache with an expire date in the future.
The weird thing here is that the counter is incremented each time u request the image, so FF knows it is in the cache and even if the expire date is in the future, FF asks it again to the server.
- Is it a FF bug? If u read the http specs or if u google a little, u can come to the conclusion that FF does not follow the standards,
but... images.google.com for example manages to get its images cached with FF.
They use an http response header "cache-control: public, max-age=604800".
I tried the same and all kinds of combinations but without success.
When i compare my image with the one from google in the FF cache, they both have the same attributes.
- It's not an apex issue neither because it works with IE, most probably an incompatibility between apex and FF?
Maybe the use of cookie? or the http request (not the response) containing "cache-control: max-age=0"?
I've found so far 2 half solutions:
1) use ETag and modified date, see the Tyler Muth's note Link: [http://tylermuth.wordpress.com/2008/02/04/image-caching-in-plsql-applications/].
with this technique FF continues to send request each time but the answer is shorter because it's just a "304 not modified" instead of "200 OK" (200 response is bigger as it contains the image).
it's better than nothing but you still have 1 request + 1 response for nothing.
Another problem is that you need SYS access to implement this, which is not possible on an hosted server. (note that for images from the file system it is already foreseen by apex 3.1, Tyler's note is for images from the db)
2) if you preload the image (using myimage=new Image();myimage.src='...';), then there is max 1 request per browser session.
There are 2 minor issues here:
- no caching across sessions
- if u don't want to preload all the images (example a page with lots of thumbnails, when user clicks it show a bigger image, in that case the thumbnails can be preloaded but overkill for the big images), then you need to load the image, wait until the image has loaded before displaying it, it does not slow down the execution, but requires some extra JS.
I'm not asking anyone to investigate it, i can live with the 2 workarounds,
but just in case someone encountered the same problem and already fixed it.
Let me know if u managed to use the John Scott's technique with Firefox. (U can use Firebug to see the http traffic)
Thx
Tim

Hi Anshul, hope these help. Let me know if you need to see anything else.
Best,
Menu Settings:
Tab Hyperlink:
Label Text with with hyper link option not available (works as a hyperlink in chrome and IE though):
Thanks for the help in advance!

IDVD is not working in IMOVIE

Hi, Couple of months ago I had to reinstall my Imac OS X 10.5 since then my iMovie's IDVD option is not working. I thought if I upgrade the OS and iLife it would solve the problem. Recently I upgrade my OS to 10.6.3 and Ilife to iLife 11. Even after I upgraded my IDVD option is not working on the iMovie. I can write dvd's using the regular IDVD program. But it's not working on the iMovie. Can any one help me out with this. I tried everything. Why the IDVD option on IDVD wouldn't work on my Imac.

I need to write the project to dvd directly using iDVD option in iMovie. That's what I can't do.
Some of us have found that Share to iDVD produces inferior quality DVDs than when exporting using Share to Media Browser (check posts by rrodby). At least, that was the case in iMovie '09 - not sure about iMovie '11. In iDVD, simply drag the exported movie into the Theme background from the Media>Movies tab.
The exported movie can also be used for other purposes, such as copying to a flash drive or external drive for viewing on a media player. The movie is located in the project's package contents. In Finder, right-click (or Control-click) on the project name and select "Show Package Contents". In the Movies folder you will see your exported movie. If you use Share to iDVD, you don't have independent access to your exported move.
John

Image Capture not working with Canon LiDE 500F

Image Capture version 6.0.424 and CanoScan LiDE 500F 11.2.5.0 does not work properly.
Regardless the resolution, the resulted file has a very small size.
As a test I scanned a 9x20cm document at different resolutions and for all resulted files 'Get Info' reported small dimensions: 69x147 pixels. It is interesting that the size of the file varies with resolution, but when opened in Preview or Acrobat Reader, the small size is used.
As for other reports, CanoScan Toolbox works properly.
Regards,
Liviu

Hello Liviu,
There has been a couple of posts regarding the same issue with Image Capture. Have a look at this one for example.
http://discussions.apple.com/watches!add.jspa?forumID=1344&threadID=2272250
As I stated in this thread, I do not have this problem with Image Capture and my LiDE 200 or my MP980 AIO. So there must be something with the drivers used by these older model of Canon scanners when using Image Capture.
I haven't seen anyone provide a solution as yet so you may need to escalate this to Canon if you have a need to use Image Capture.
Pahu

Image stabilization not working in iMovie 9.0.7

Similar Messages

Maybe you are looking for