Image trailing on the Yoga 13

Hello,
I've recently bought a Yoga 13 and upgraded the with a 256Gb SSD and 8Gbs of RAM. I'm not sure whether I noticed  this problem previously, but having installed a few less than taxing games I'm noticing a trail left by high contrast a or bright images when for example I turn look left right or similiar. I have also noticed it on the desktop while dragging icons around, though  have to look for it and do it quite quickly.
Is this experienced by others?
Many thanks!

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,  
Please confirm few details:
 1. Did you install any third-party software before the issue  started ?
 2. Did you try to scan the virus with any security software?
Please perform a Clean Boot   and check if issue is still persisting
http://support.microsoft.com/kb/929135
Do give this a try and let us know  
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
                        English Community   Deutsche Community   Comunidad en Español

Similar Messages

  • I really like the Yoga 13 tent mode

    I just want to say how much I'm liking the Yoga's tent mode.  I bought the Yoga 13 because it seemed to have the best combination of features/screen/resolution for a new Windows 8 laptop.  I didn't plan on using it as a tablet nor really using it other than a regular laptop.  But I'm finding that the touchscreen features are convenient for casual browsing and that I like using the Yoga in my lap, particularly in tent mode (where the screen is upright & closer to my face).  I thought that having all the different screen positions was just a gimmick, but they're often useful.  Great job, Lenovo!

    thanks for sharing!
    the yoga is an interesting machine. it's taking me some getting-used-to, coming from the classic "Think" products. good learning experience for me.
    cheers.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Any other ways to get a complete restore of the Yoga

    I partitioned the Yoga the day that I got it and saved my restore data to an external flash drive. That flash drive got into the hands of one of my kids, who reformatted the drive and removed the restore data.
    Is there any way that the community (users, mods, and Lenovo) could provide an image for the whole Lenovo recovery (return to factory default - original partitioning, etc)?

    Unfortunately anyone including Lenovco supplying an image through the forum or otherwise through the internet would be illegal, your best bet would be to contact support.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

    In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

    Please don't post the same question multiple times!

  • Need to save the image saved in the System Clipboard in using JDK 1.3.1

    Does anyone know how to use JDK 1.3.1 to take an image saved in the System clipboard and save it to a file using the JPG format?
    I know how it is done in JDK 1.4 using the following code. Unfortunately, the same code does not recognize the image in the clipboard in JDK 1.3.1
    I am using jai-1_1_2_01.
    package clipboard;
    import java.awt.datatransfer.Clipboard;
    import java.awt.datatransfer.DataFlavor;
    import java.awt.datatransfer.Transferable;
    import java.awt.image.RenderedImage;
    import java.awt.Toolkit;
    import java.awt.datatransfer.UnsupportedFlavorException;
    import java.io.IOException;
    import java.io.FileOutputStream;
    import java.io.BufferedOutputStream;
    import java.io.File;
    import javax.media.jai.JAI;
    import javax.media.jai.RenderedOp;
    public class clipboard
    {  private File tempFile = null;
    * @param args
    static int BUFFER_SIZE = 65536;
    public static void main(String[] args)
    {  clipboard clip = new clipboard();
    clip.writeImageFromClipboard();
    public void writeImageFromClipboard()
    {  Clipboard            clip = Toolkit.getDefaultToolkit().getSystemClipboard();
    Transferable transferable = clip.getContents(null);
    RenderedImage img = null;
    FileOutputStream fileOutStr = null;
    BufferedOutputStream bufOutStr = null;
    DataFlavor [] dataFlavors;
    File tempFile;
    int
    byteCount;
    String [] strArr;
    dataFlavors = transferable.getTransferDataFlavors();
    System.out.println("clip=" + clip.getName());
    System.out.println("Transferable=" + transferable);
    for (int i = 0; i < dataFlavors.length; i++)
    {  System.out.println("dataFlavours[" + i + "]=" + dataFlavors.toString());
    if (transferable.isDataFlavorSupported(new DataFlavor("image/x-java-image; class=java.awt.Image", "Image")))
    { try
    { img = (RenderedImage) transferable.getTransferData(new DataFlavor("image/x-java-image; class=java.awt.Image", "Image"));
    if (this.tempFile == null)
    { this.tempFile = File.createTempFile("__TMP_IMG__", ".jpg");
    System.out.println(this.tempFile.getCanonicalPath());
    fileOutStr = new FileOutputStream(this.tempFile);
    bufOutStr = new BufferedOutputStream(fileOutStr);
    // Encode the file as a JPG image.
    JAI.create("encode", img, bufOutStr, "JPEG", null);
    catch (UnsupportedFlavorException e)
    { e.printStackTrace();
    catch (IOException e)
    { e.printStackTrace();
    finally
    { if (bufOutStr != null)
    { try
    { bufOutStr.flush();
    bufOutStr.close();
    catch (IOException e)
    if (fileOutStr != null)
    { try
    { fileOutStr.flush();
    fileOutStr.close();
    catch (IOException e)
    else
    { System.out.println("Not an image!");

    The login  you connected to the server  and run the above statement does not have permissions to operate  on this path "C:\Users\ISLLCdba\Desktop\MAA
    PROFILE PICTURES\"
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Re-size an image in using the Image class?

    Is there a way to resize an image using the com.day.cq.wcm.foundation.Image class?  I wanted to extend the foundation image componet and have it resize to a specific height and width.  Is there a way to change the size of the image before you call image.draw(out) ?

    You also don't want to insert you resizing efforts prior to calling the image.draw method. The draw method doesn't actually render the image,  it draws the HTML img tag that your components print out. If you were to use the ImageHelper to get the layer and resize it that would not actually change the size of the image.
    Now that img tag will contain a URL to the image, and that URL will generally look something like this (unless you have customized your image components):
    /path/to/your/page/_jcr_content/par/textimage/image.img.jpg/1323947520848.jpg
    This URL is going to trigger a script or servlet that will be responsible for rendering the image. In the example above because the textimage component extends the parbase component and because URL includes the img selector it will end up triggering the servlet at /libs/foundation/components/parbase/img.GET.java. If you go into CRXDE Lite you can go to this file and look at the source code of this servlet and see an example of how it uses the layer to resize the image if that author edited the image in the smart image widget.
    You can also see example of servlets that resize and image ot specific preset sizes (as you want to do) you can look at /apps/geometrixx-outdoors/components/product/image/thumbnail.GET.java and /apps/geometrixx-outdoors/components/product/image/nav.GET.java.
    So what you would want to do is something like this:
    Create your own component at /apps/mysite/components/foo
    Create a servlet at /apps/mysite/components/foo/bar.GET.java - put your logic to resize the image here based on some of the examples
    Create your component JSP at /apps/mysite/components/foo/foo.jsp
    Create your component's dialog and in this dialog include a smart image widget - make sure you store your image on component node, not a sub-node. If you store your image on a sub-node you need to make sure the sub-node includes the same resource type as your main node).
    In your component JSP when you create your foundation Image object make sure to image.setSelector("bar") before you call image.draw()
    That should result in an image URL that looks like /path/to/your/page/_jcr_content/par/textimage/image.bar.jpg/1323947520848.jpg
    Those steps aren't tested - so I may have missed something or mistyped something, but it should point you in the right direction.

  • Using Javascript & Actions to resize an image and add the filename as text

    Hello,
    I am currently working on a way to take an image, resize it and add exactly what is in it's file name (before extension) as a text layer. I have succeded in this BUT am having issues with file names that require more than one line of text.
    I need the text to align to the bottom of the image & the script or action must then resize the image so that the text does not overlap.
    Any ideas on how this can be done?
    At the moment I am using:
    -"Fit Image.jsx" to resize my image to a specific size (This was included in the Photoshop CS5 scripts)
    - A script to add the file name without extension and place the file name at a specific position.
    AdFileName.jsx
    if ( documents.length > 0 )
    var originalRulerUnits = preferences.rulerUnits;
    preferences.rulerUnits = Units.PIXELS;
    try
      var docRef = activeDocument;
      // Now create a text layer at the front
      var myLayerRef = docRef.artLayers.add();
      myLayerRef.kind = LayerKind.TEXT;
      myLayerRef.name = "Filename";
      var myTextRef = myLayerRef.textItem;
      // strip the extension off
      var fileNameNoExtension = docRef.name;
      fileNameNoExtension = fileNameNoExtension.split( "." );
      if ( fileNameNoExtension.length > 1 ) {
       fileNameNoExtension.length--;
      fileNameNoExtension = fileNameNoExtension.join(".");
      myTextRef.contents = fileNameNoExtension;
      // off set the text to be in the middle
      myTextRef.position = new Array( docRef.width / 2, docRef.height / 2 );
      myTextRef.size = 12;
            myTextRef.font="Arial-BoldMT"
            //set position of text
            myTextRef.justification = Justification.CENTER;
            myTextRef.kind = TextType.PARAGRAPHTEXT;
            myTextRef.width= docRef.width;
            myTextRef.height= docRef.height/ 2;
            myTextRef.position= [0, docRef.height * 0.88];
    catch( e )
      // An error occurred. Restore ruler units, then propagate the error back
      // to the user
      preferences.rulerUnits = originalRulerUnits;
      throw e;
    // Everything went Ok. Restore ruler units
    preferences.rulerUnits = originalRulerUnits;
    else
    alert( "You must have a document open to add the filename!" );
    Can the position be changed to allow more rows of text but keep it aligned with the bottom of the layer?
    How can I script in a way to make the image resize based on the amount of text lines?
    Any help would be greatly appreciated.

    You can add a text layer any where the only thing you need to worry about is the size of the font you use.  You can normally calculate a font size by saving the images resoltuion and then setting its resolution to 72 DPI calculate a font size basied of the images pixel width and the number of characters you want in a line. After adding the text layer you can restore the image to its original resolution and align the text layer by making a selection and alignint the text layer to the selection.  There are nine posibilites like the positions in the selection you can align to like a tick tack toe board. You need to use a script to add the text layer because your retrieving the filename.  The positioning of the text layer could be done easily in an action the would use the scriot to add a text layer the do a select all  the align the added text layer to the selection.
    About your script don't make text paragraph just add new line characters to make a multi line text layer So it can be positioned easily
    I do just that with my stampexif action.  The action uses my stampexif Photoshop java script to add a multi line text layer containing some formatted EXIF data then the action centers the text layer and add a layer style to it. Link http://www.mouseprints.net/old/dpr/StampExif.jsx Example

  • I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

    I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it.  It has worked in the past but I downloaded the update today and photomerge will not work correctly.  Any ideas?

    hedger,
    How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How to set a background image to fill the entire screen on any device in a spark mobile application

    Hi,
    I started developing a mobile application with Flex.
    I'm trying to set a background image to fill the whole screen. I've been stucked at this point for days now. I tried everything and no solution seems to work for me.
    I'm using a TabbedViewNavigatorApplication and i need to set some background images on views.
    I need my image to fill the entire screen on any device. i don't need to mantain image aspect ratio,  just need it to be fullscreen. This seemed to work when setting a custom skin on the TabbedViewNavigatorApplication, however this blocked all my views for some reason and all components contained in view became invisible.
    Can you please tell me how can i achieve this?
    Kind regards,
    Dan

    Basically you need a larger image which can accommodate any device. The trick is to show only what each device can display, so therefore some clipping will occur based on device. Have something centered and towards margins have a  gradient or just plane colors that way the stuff in the middle will be visible on every device while nobody will care if you are clipping from the color fill.
    C

  • My mac will not show images when on the internet?

    My mac will not show images when on the internet?  I think I have inadvertently changed some settings but nor sure which one.

    I am going to assume you are using Safari here. If so then go to the Apple menu bar and hit Safari-> Preferences.  Under the Apperance tab there is a check box that is called "Display images when the page opens".  Check if that is unticked.

  • Photoshop CC: Have a template that I moved image into.  Image is too small.  How do I resize the image while in the template?  Or must I go to original image file and resize there again and again until I get the right fit?

    I have a template that I am able to plug different pictures into at different times.  The problem is that when I plug an image into that template, I find that the image is either too big or too small.  Is there a way to plug the image into the template and resize the image (and not the template itself) OR will I have to go to the file with the original image and resize it there and then try to plug it in to the template to see if it fits------and if it does not fit, go back to the original file with the image and resize it again and see if that fits---and so on and so on...........?  I have tried the" image size" option but it's hit or miss------mostly miss!
    Thanks!

    Read up on Smart Objects. It looks like you have no idea as to how to create and use them.
    Jut create a Smart Object from the layer containing whatever it image it is that you are "plugging into your template".  But you do need to learn the application at its most basic levels.
    Photoshop is a professional level application that makes no apologies for its very long and steep learning curve.  You cannot learn Photoshop in a forum, one question at a time.
    Or is it possible that you don't even have Photoshop proper but the stripped-down Photoshop Elements?"
    If the latter is the case, you're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you would want if you're working in Elements.:
    https://forums.adobe.com/community/photoshop_elements/content
    If you do have Photoshop proper, please provide the exact version number of that application and of your OS.
    (edited for clarification)

  • How Do You Make an Image Flow with the Text?

    Hello all,
    I am using CS4 InDesign on Windows Vista. I am fairly new to Indesign but try to do my research and homework well before asking what I hope is not a really dumb question.
    I am writing a book of approx. 350 pages that is an illustrated encyclopedia of 156 plants and their oils.
    Each 2 page spread is a single entry for a plant. The graphics frames on each spread are identical in size, position and styles for a consistent look throughout the document.As you can see (hopefully) each page is a single column. See screenshot below
    In order to overcome my first problem of positioning and sizing the graphics frames uniformly, I created the master pages with the graphics placeholders sized, positioned and formatted to my liking. This worked wonderfully and I placed all of my 300+ graphics by simply over riding each frame.
    Then in my editing I decided to add another 2 page spread somewhere in the middle of this fairly large document.
    What a NIGHTMARE. The text predictably shifted but now ALL of my graphics were no longer associated with the corresponding text! Arrrgghhh.I had not anticipated this behavior (used MS Word for 15 years) or I would have done something different.
    3 hours later I finished re -"placing" the images associated with the correct text.
    I researched the help file and found out about the neccessity of anchoring graphics to text. I have read through the threads in this forum, followed links to "indesignsecrets.com/make-an-image-flow-with-the-text" and " Working with anchored objects by Anne Marie Concepcion"
    My concerns are this.
    An inline graphic places the graphic back onto your text layer for some reason ( Previously my graphics each had their own layer)
    Not wanting to start (again) from scratch with my graphics I converted them to inline/custom anchored objects.
    But to select then cut then paste every pre existing graphic to anchor it inline seems to be cumbersome and counter intuitive although the top smaller graphic did position well and the text seemed to wrap ok.
    When I placed the larger bottom graphic on the left facing page using custom positioning I was not able to get the text to wrap at all.( The in line anchoring did not seem to allow for positioning on anything but the 'Y' axis).
    It seems that there would be a simpler way to place text and graphics where you want them and have them associate and flow together (or not) when you want them to and have text wrap easily around an anchored object without keyboard gymnastics. It would seem that the concept of a certain graphic being associated or linked with certain text would not be an unusual concept in desktop publishing.
    Am I missing something?
    Can you place an anchored graphics frame on the master page with your desired options?
    How would this be done if possible?
    Is there any other way (i.e grouping) to keep graphics associated with the desired text so that it flows together if extra pages are added?
    Is the fact that my graphics frames are on my master pages responsible for my text wrap difficulty? (I have text wrap enabled on my master pages)
    Are there any settings, redundant or otherwise, I need to be aware of?
    Thank you in advance for any suggestions or directions
    L.N.

    Hello Again,
    Thank You Bob but I am still a little fuzzy on this. I have already created object styles for the graphics frames. For instance the small graphic underneath the heading (Its a drop of oil) has an object style applied. Now I checked and it has the anchored object options checked in the style dialog box. When I reapply the style to the next similar graphics nothing happens. It is still not anchored. Do I need to create a new style based on "nothing" add my effects plus the anchoring options? Basically start over. If thats what I need to do thats OK. As to your instruction that object styles could accomodate this anchoring thing...thats what I thought too but somehow I can't get it to work. See object style dialog box screenshot below:
    For the larger graphic on the bottom of the left facing page. I still cannot get any text to wrap. In the screenshot example the text describing this particular plant doesn't go to the bottom of the page so the wrapping issue on this page is moot. However I have some entries where the body of the description is more involved and does go to the bottom of the page and the text WOULD need to wrap around the plant (larger ) graphic.
    Hi there Harb, Yes I found out early on that object styles can't apply size (that would be on my wish list for sure) That is why I found that creating my graphics frames on the master page with the correct size, effects and positioning tickled me so much. Can you believe I originally went through and MANUALLY resized and repositioned each and every 300+ graphics in this book but it still wasn't right. I'm nothing if not persistent. (Now if I could just get my grown sons to pick up their socks!)
    Anyway the master page graphics frames idea would be perfect if I could get the images to anchor in their respective spots on the master page as well.
    For your second suggestion. I am not clear about why I would need to break the threads of each spread so that each spread is a seperate article. Is the threading issue the thing that is causing my text to move on leaving their associated graphics behind? If so how do I go about doing this?
    So to recap:
    1. I need to know if I can modify my object style or recreate from scratch with the anchoring option (as I said it didn't work)
    2. Can't get text to wrap around the Custom anchored graphic at bottom of page at all
    3. Im not clear on the breaking the threading on the spreads
    I am willing to go back through and start from scratch (new master pages, styles etc ) if neccesary. This book is the culmination of 7 years of research and artwork.Basically the project is DONE. Now if I can just format it correctly.
    I can't thank you both enough for your time, suggestions, expertise and patience.
    Thanks again
    LN

  • Why does moving the mouse over an IMAQ image display slow the GUI down so much?

    I have a large application with several vi's running simultaneously under labview 8.6.1.  When I mouse over an image display control in one of the vi's, everything slows down a shocking amount in all the other vi's.  The windows task manager does not show a large increase in CPU use.  My pc is has a quad cpu with 4GB of RAM, and the CPU and memory loads do not appear to be terribly taxing to the system.  However, many of my vi's apparently come almost to a standstill if I just move the mouse in a circle around my image control.
    This looks like it is largely a GUI display issue.  If I make a new vi and put a while loop in it that only displays the iteration loop number to an indicator, I can see the iterating occurring, then stopping totally when I mouse inside the image display control.  When I stop moving the mouse inside the control, or when I move it outside the control, the interation loop number jumps up, as if it had been incrementing behind the scenes the whole time.  So only display of the interating was halted.
    This problem occurs even if the vi with the image control is not executing.  If the vi with the image control is open but not running, and I mouse over the image on it, the other guis all come to a screeching halt.
    Does mousing in the image display control really utterly crush all other guis in all other labview windows?  Is this an issue inherent to the image display control?  If so, is there anything I can do about this? 
    Also, this issue is not entirely limited to display.  I started looking at it in greater detail because this issue also exposed what I think is a race condition in my code.  I have a vi that acquires an image from a ccd and puts it into an IMAQ image.ctl.  This image then gets passed up to a vi up the call chain, and is put on a queue and sent over to be de-queued by a vi that has the image display control.  Here's the kicker:  when I mouse over the image display control, the image successfully gets acquired inside the subvi, and if I probe the wire leading to the output IMAQ image display.ctl, I see the image.  If I simultaneously probe the wire coming out of the subvi one level up the call chain, the image gets lost about half the time.  This only happens if I am mousing in the image display control IN A TOTALLY DIFFERENT AND SEPARATE VI.  If I bump up the priority of the ccd image acquisition vi to 'highest priority', the problem only happens about 1% of the time, and I really have to mouse around to make it happen.  Still, it's disturbing that mousing in the GUI in one window results in a failure of a separate subvi to simply pass an image up the call chain.  I understand that IMAQ images are referenced rather than passed by value, but I don't see why there should be a failure to pass the image up the call chain.  I've looked for a race condition, but can't find one.
    Eric

    I have finally been able to replicate the behavior that you are seeing on another computer once the image was large enough.  Here are a few notes about this behavior:
    First. The UI only slows down when the images are large, 16 bit images.  The reason why this is unique to 16 bit images is that they can only be displayed on the front panel as 8 bit images.  The workaround that Weiyuan suggested to change the 16 bit display mapping hints towards the root of the problem...that any time a mouse runs over the indicator, Windows asks the entire image to re-draw (having a separate indicator overlapping the image will create the same behavior).  With a 16 bit image, not only does the image have to re-draw on the screen but the 16 bit pixels need to be mapped to 8 bits.  When setting the 16 bit display mapping to Full Dynamic, this requires mor computation/pixel than 90% dynamic or one of the other mapping schemes.
    This is expected behavior if your program is running and you're trying to display a large 16 bit image.  To fix this behavior there are a couple options:
    Change the 16 bit display mapping to something other than full dynamic.  You can choose which 8 bits to display or if you want to map the bits. 
    Resize the image just for viewing purposes on your front panel (since you aren't going to view every single pixel of you image on the screen). You can use the IMAQ Resample.vi to do this.  This will allow you to take your 1500x1500 pixel image and only display a 500x500 pixel version.
    If you are interested in viewing small details of the large image, consider just displaying a smaller region of interest at a time.
    Let me know if any of these solutions work for you.  Good luck on your application.
    Zach C.
    Field Engineer
    Greater Los Angeles

  • Lately when I do an images search only the first page actually shows the images- the rest show blank squares- why, and how do I fix it?

    Over the last week I have noticed more and more that my searches do not show up properly. Today only the first page of images actually show, the rest are blank spaces, but if I click they go to the image site. The rollover does not show either.
    What can cause this, and how do I fix it? I have tried various safe settings but this has no eefect at all.
    Thanks.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • Adjusting multiple images to be the same size?

    Hi,
    I'm trying to create a photo collage in Photoshop that consist of multiple photos imported as Smart Objects into layers, that are all the same size. Ideally, I'd like to be able size/crop/scale each image as a group, or individually, on the fly. So lets say that I have 6 images as Smart Objects on layers, and that they are all of varying sizes, and I'd like to adjust each image to be the same precise size, 2" x 3". Maybe later I decide that they should all be 2.5" x 3."5, can I easily change all 6 images at once? I've tried going into Free Transform and changing the size of each individual image here, but I can't get the precise size that I want. Is there a way that I can open a dialog box, and specify the exact size? Can I then repeat this for all images/layers that I've selected?
    I hope this makes sense, and that someone has a brilliant idea on how to do this?
    Thanks!
    Jeff

    Image Processor doesn't get me what I'm after.
    Photoshop has the option to create a contact sheet. So imagine that I want to create a contact sheet of images, but keep them on separate layers, and be able to change the size of the images as I feel, to fit my collage.

Maybe you are looking for