Image transparency in 7650 and other s60

I have a problem with image transparency in s60 phones. I have 2 versions of .png files. One I got from graphic designer with transparent background, the other is the same file, but I saved it in IrfanView, choosing the transparent background color.
The former, looks nice on Nokia 7650, but seems corrupted on other Series 60 phones.
The latter is OK on all Series 60 phones, but on 7650 where the image doesn't have a transparent background.
Any of you runned into such problem yet?

After looking around a bit, I found an add-on called FastestFox.
You can find the add-on here: [https://addons.mozilla.org/nl/firefox/addon/fastestfox-browse-faster/ FastestFox].
I haven't done too much research to the actual add-on itself, but after installing it in Firefox myself and using the Facebook person searcher I noticed the images and also other things like websites loading a lot faster.
I hope this add-on helps you.
Edit: The add-on adds some extra options when you right click a website (to download things from the website). You have to decide if you think this is worth the extra speed.

Similar Messages

When I "save page as" I also get a folder with gif images, jscript script files and other similar items. how can I stop this.

When I "save page as" via the file button at the top edge of the page, I also get a folder containing gif images, jscript script files and other similar items. I am not is allowed to delete it unless I also delete the page I need. How can I stop this from happening. is it the way I've configured firefox perhaps.
== since I installed firefox

Make sure that you have selected "Web Page, complete" to save the page.

Slow image loading in Facebook and other sites.

In some sites, especially Facebook, I've a slow image loading. For example, when I search for a person on Facebook, then the profile image of poeple takes 6-7 secons to load.
I've installed Firefox yesterday, so I exclude that I have to delete cookies, etc. With Chrome, Facebook load images much more faster. Re-installing shockwave, the loading is faster, but not enough.
Any suggestions?

After looking around a bit, I found an add-on called FastestFox.
You can find the add-on here: [https://addons.mozilla.org/nl/firefox/addon/fastestfox-browse-faster/ FastestFox].
I haven't done too much research to the actual add-on itself, but after installing it in Firefox myself and using the Facebook person searcher I noticed the images and also other things like websites loading a lot faster.
I hope this add-on helps you.
Edit: The add-on adds some extra options when you right click a website (to download things from the website). You have to decide if you think this is worth the extra speed.

Website images will sometimes load and other times I get the blue square?

Does anyone know how to resolve the following:
frequently visited websites will load images and then while searching the website (i.e. vrbo.com) the images will no longer appear and I'll see the blue square and "?". Why does this happen and how can I change this?

HI,
If you are using Safari, from the menu bar click Safari / Preferences then select the Appearance tab.
Select the box next to: Display images when the page opens
You may need to Quit Safari then restart in order for the changes to take effect.
Carolyn

I have a Nikon P7700. Only some of the images will download ?and others say that Iphoto cannot read the files. I need raw images fo print.

I have a Nikon P7700. I can download some of the images. The same set of images will not download so I can send 300dpi images for print. I am new to figuring this out. Please help?

Does your MacBook Air run a reasonably current Operating System (OS X 10.8.5 or later - the current version is 10.9.2)? Are you running a reasonably current version of iPhoto (9.4.3 or later - the current version is 9.5.1)?
If so, you can download this RAW compatibility update from mid-January. It supports your camera.
http://support.apple.com/kb/DL1717

N79 and other s60 phones-what does power saving mo...

Would like to to know whether, aside from the quicker screen dimming, there are any substantial differences in how the phone operates when set to Power Saving mode?
I generally keep other specific settings in such as way as to minimize power usage (WLAN scanning, Bluetooth, GPS off, etc.).
Thanks.

Also bear in mind upon S60 3rd Ed. devices that all energy saving measures such as reducing WLAN Tx power level from default value of 100mW to 10 or 4 are not immediately obvious:
Happy to have helped forum with a Support Ratio = 42.5

Missing images and other content

I'm having problems with my site I created in iWeb. It will publish fine with no errors, but when I visit my site in Safari or Firefox different images will not appear and have ? in them. If I refresh, some images will then appear and others will not. When I click on links to different pages the same thing happens different images have ? in them. If I refresh then I get different images not appearing. Sometimes it will even take me to a page on the apple site saying that the page cannot be found. This is very frustrating. My site is www.tutordigital.net (which takes you to my site published with iWeb on my Mobile Me account).
I would really like some help to solve this problem. Thanks!

Welcome to the Apple Discussions. You web site is complete. It's the server that's not loading all files every time. It took me several tries to get the first page loaded completely and then the other pages were all OK.
You name on the TUTOR page is on two lines. You might want to enlarge that text box.
If this site is a commercial site and important as far as income flow I suggest you host the site on a commercial site. You'll get much better speed, bandwidth and support - actual ear-to-ear with a live person. If it's not loading well on Safari it will be much worse with Internet Explorer.
One thing you can do to help the site load faster is to use Web Site Maestro to optimize your files and upload them. Roddy and I both use it. I host on MobileMe. It has reduced the size of many of my pages by up to 30-35 percent. It will also upload only those files that have been changed or new.
Roddy uses Host Excellence and is very happy with it. Others have responded favorably regarding GoDaddy.com. It's something to consider depending on the nature of your site.
OT
Message was edited by: Old Toad

Jasper report on HTML when one image loaded from database and for the other

How to generate jasper report on HTML when one image loaded from database and for the other we give a image path
My code
ByteArrayOutputStream baos = new ByteArrayOutputStream();
          exporter = new JRHtmlExporter();
          exporter.setParameter(JRExporterParameter.JASPER_PRINT, print);
          exporter.setParameter(JRExporterParameter.OUTPUT_STREAM, baos);
          exporter.setParameter(JRHtmlExporterParameter.IMAGES_URI, strImageInputDirectory);
     exporter.setParameter(JRHtmlExporterParameter.IMAGES_DIR_NAME, strImageOutputPath == null ? "." : strImageOutputPath);
     exporter.setParameter(JRHtmlExporterParameter.IS_OUTPUT_IMAGES_TO_DIR, Boolean.TRUE);
     exporter.setParameter(JRHtmlExporterParameter.IS_USING_IMAGES_TO_ALIGN, Boolean.FALSE);
     exporter.setParameter(JRHtmlExporterParameter.IS_WHITE_PAGE_BACKGROUND, Boolean.FALSE);
          exporter.exportReport();
          byte[] bdata = ((ByteArrayOutputStream) baos).toByteArray();
Can any one help pls
Message was edited by:
ameet.au

hey sorry for posting it in this forum.
but do u have sample code for making it work.. since i am able to do it on PDF format(image from Database and another stored in the webserver) using
byte image[] =(byte[]) outData.get("image");
                    ByteArrayInputStream img = new ByteArrayInputStream(image);
                    hmimg.put("P_PARAMV3", img);
print = JasperFillManager.fillReport(reportFileName, hmimg, jrxmlds);
bdata= JasperExportManager.exportReportToPdf(print);

Hello apple guys, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

hello apple guys, after installing OS X Mavericks, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

So is this the way Apple works now? Not solving customers problems? I'm sure so many users have had this problem. I've had, and I reinstalled Mavericks 3 times. Works fine for some days and then several Apple Apps stop working. Is that a way to force us ti update to Yosemite? (I don't want to) and then pay to update some third party programs (i.e. Pro Tools). Also, there are so many 15" MacBooks Pro with graphic problems and of course the guys at the Apple Service Centers always say: "It's the logic board, you can have it replaced, but it's so expensive I would recommend a new Mac". I really, really miss Steve Jobs!

Photo images from dig. cam [one is error and other won't open] questions

My wife inserted the sd card in the card reader and copied about 70 photo image files to the Mac. The camera that took all the 70 photos was a Panasonic DMC-LZ5 but I don't think the camera model matters much here.
For the first time, 2 of the many images seem to be corrupt. Mac X reports one photo image has an error while trying to open and reports the second image won't open.
My main concern is whether or not to just delete the two error/corrupt jpg images. My other main concern is that I don't want to keep the two images if it could affect or corrupt my hd or Mac system in some way.
I normally just trash corrupted files; however, in this case I went ahead and attempted to open both of the 2 troubled files myself later and they both opened up in Preview and didn't report any error or corruption. However, one of the jpg images defintely is corrupt when viewing it as the bottom of the image is definitely messed up. However, the other image now opens perfectly and looks fine to the eye as if nothing is wrong with it.
Here is a link to the one photo image that isn't quite right [note the obvious distortion at bottom of image]. Link is http://mysite.verizon.net/vzenvo78/question595.jpg
Further very relevant information: The SanDisk sd card that all the 70 images were on is a 1 gig card and the sd card seems to be a total loss. The sd card can't be initialized/formatted by disk utility and furthermore the sd card is no longer recognized by the Panasonic camera - the Panasonic camera won't even preview the images off the card or allow me to format the card even from the camera.

Hello,
I see what you are talking about. I just discovered this same exact problem on a friends G5 after he uploaded pics from his Leica.
This is what I did: I ran Disk Utility from the system restore disc to verify and repair the drive. DU reported Volume Bitmap problems. DU was able to repair the disc. Next, I created a new user account and tried uploading the images from the camera to the G5 and it worked just fine. The images loaded like they should.
I also reinstalled the drivers that came with the camera.
Delete any files that your Mac reports as a problem. It's just not worth leaving them on the drive.
So...... run Disk Utility from your system restore disc. If it reports errors, hopefully DU can repair them. If not, one option is to get DiskWarrior here:
www.alsoft.com or TechToolPro4 here: www.micromat.com
One other idea is how old is the card?
Next idea is to create a new user acccount: System Prefs/Accounts. Try using that account to upload the same images. See if they upload as they should. If they do, then the issue isn't system wide, it's just in the other user account.
Remember to always back up your images/audio/data often as you never know when you might need to do either an Archive or Erase and Reinstall.
Carolyn

Images loaded fine in the previous version of firefox, but now do not open in firefox 5. It is our business' website. it opens and looks fine in explorer and other browsers.

Images (actually graphics) loaded fine in the previous version of firefox, but now do not open in firefox 5. It is our business' website. it opens and looks fine in explorer and other browsers. However, please goto www.trinitystone.biz (using Firefox 5)and look at how the top menu bar has a black box surrounding it and the bottom menu also has this black bar. It is not supposed to be there, if you view the site from IE, you will see what it is supposed to look like. Any help would be appreciated! Thanks

You can modify the pref <b>keyword.URL</b> on the <b>about:config</b> page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

Internal links in portal (CSS, images, and other struts actions)

Good morning gurus! I have another question regarding Struts Portlets. We have an application that builds a page with an image that comes from the database. The application is composed of two Struts actions. One that's in charge of drawing the page and the other action is in charge of bringing the image from the database. The second action is called from a JSP (img src="/getImage.do"). In portal, once the portlet rendered the JSP it doesn't recongnize the other links inside the JSP (the call to the second action). Also, other links suchs as images, CSS, and others Struts actions are not recognized. How can I access images, links, and CSS from the main application (the actual application).
Best regards,
Marcelo Oliva
Message was edited by:
molivas08

Hi Andrew -
This is a pretty big topic for one thread ... I will try to provide some pointers on where to look for more information.
1. Need ability for non-html literate authors to update text, images and links on their portion of a shared web page
In the following whitepaper, see the section: Associated Funtion for Item Display
http://www.oracle.com/technology/products/ias/portal/pdf/oow_10gr2_1336_fender.pdf
This will allow you to prompt your non-HTML literate users for the "parts" to display and you worry about the UI.
2. Need ability to enforce common look and feel on content provided by non-html literate authors.
Create pages based on Templates. Templates can force the style on users. Again - do not use text items and the RTE for users, you control the display with an Associated Function.
3. Prefer ability to approve content before it goes live.
Grant content contributors "Manage with Approval" access
5. Need advanced search capabilities
Check out the search section on Portal OTN
http://www.oracle.com/technology/products/ias/portal/content_management_10gr2.html
Hope this helps,
Candace

Why can't I drag and drop images from the browser into other programs?

Ever since I upgraded to Firefox 4 (even after I upgraded again to Firefox 5) I have been unable to drag images from the browser into other programs, including MS Paint and IcoFx. I receive an error message stating that the file (the address given lists it as being located in the temporary files folder) cannot be found.
Prior to this I had always been able to conveniently drag and drop images for easy editing without having to save first and then open them. This feature is important to me, as I work with graphics very often, and is still available in Chrome and Internet Explorer. I love Firefox though, and hope that there is something I can do to fix the problem.

I had this problem on Windows 8.1.1 and iTunes 11.2.2.3
To resolve it from within Itunes I did : Edit, Preferences, Sharing.
I took the tick out of "Share my library on my local network"
Click OK.
Closed iTunes/
Reopened iTunes and I can drag and drop.
I went back into Edit, Preferences, Sharing and put the tick back and clicked OK.
Works fine now.

Jdeveloper visual editor do not show images and other component shapes

I used jdeveloper(10.1.3.3.0) to create an ADF BC application, I create a jsf jsp file and drag and drop components from ADF Faces Core to this file visual editor, but jdeveloper visual editor do not show images and other component shapes.
Could you tell me how I can fix this problem?
Thanks,
Mike

Actually, I need to make a dummy change to the jsp file and then it will display boxes representing the objects in the visual editor whereas I get an exception in the log:
javax.servlet.jsp.JspException: Cannot find FacesContext
This does not talk much to me !
Thanks

Using SE friendly urls - Broken Images and other questions

Im trying to find a workaround for an issue caused when I create SE friendly URLS and i have a few questions too.
I am making www.mydomain.com/itemid=114
into www.mydomain.com/shirts/red/114
question, is keeping the 114 still in the url ok?
does it matter if its at the beginning or the end?
like the above or like this www.mydomain.com/114/shirts/red
and the biggest issue is - how do i work around the image references.
www.mydomain.com/itemid=114
on this page, i have an image named LOGO.jpg
and the reference is just i/logo.jpg which is relative to the page url and the real location is www.mydomain.com/i/logo.jpg
HOWEVER
when i use the SE friendly url, its looking for the image in the relative folder - (which is a fake folder of course)
www.mydomain.com/shirts/red/114
so on this page its looking for www.mydomain.com/shirts/red/i/logo.jpg
SO - my question is - how do I override this and force it to ignore the folders references in the url? I still need it to look for www.mydomain.com/i/logo.jpg. I do realize that I could of course reference the images using a full url ....
meaning instead of using i/logo.jpg i could use www.mydomain.com/i/logo.jpg
but i would rather not go this route since there are about 20 image references within the template. so if there is a better way to scoot around this I would love to know what it is.
Thanks in advance
Sam

I bet you are using a relative path for your css include
instead of a root path. So if you have the following in your
http://localhost/demo/index.cfm
<link href="../styles/main.css" rel="stylesheet"
type="text/css" />
then it will look in the next folder up for a folder called
styles with a file called main.css
If you have the same line of code in
http://localhost/demo/index.cfm/about-our-company
then it will look for a folder in the root called demo with a
folder in called index.cfm with a folder in called styles with a
file in called main.css.
To solve this you need to reference your style sheet as
follows:-
<link href="/styles/main.css" rel="stylesheet"
type="text/css" />
Notice how the href begins with a forward slash (/) this
means to always access it from the webroot. You will need to do
this for all your internal links as well because they will not
work, this means links and image references the works.
HTH

Image transparency in 7650 and other s60

Similar Messages

Maybe you are looking for