Image update while PS is saving

Hello,
Saving a picture in PS can take some time. While PS is saving a picture, switch o to Lightroom at select the picture.
LR is trying continuously to update the picture: the picture is blinking uncomfortably.
To my mind, LR should update the picture once PS is finished
Regards

Hi,
I would say the best approach is the one you already following. Meaning you can check the table number of entries and see if it is increasing and looking for last changed etc. From a functional side the one other aspect i can think of is to view the through transactions. For example; if your job is supposed to make updates to WBS Elements; from PRPS you can see that job has made the update and also you can validate this using project display.
PS: please be careful in opening transactions while to job is running as you might end up locking them if you open in change mode.
Regards
Sreekanth

Similar Messages

Tables updated while creating order, before saving

hi friends,
Please provide list of tables updated while creating the order, before saving it.
regards,
vandana arora

Hi
The following tables get updated
VBBE - Sales Requirement
VBLB - Release Order Data
VBAK - Sales Document Header
VBPA - Partner Table
VEPVG - Delivery Due Index
VBAP - Sales Document Item Data
VKDFS - SD Index: Billing initiator
VAPMA - SD Index: Order Item by Material
VAKPA - SD Index: Order Item by Partner Function
VBEP - Schedule Line
VBKD - Sales Doc: Business Data
VBEH - Schedule Line History

The report terminated with error: REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document.

Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME   09.14.4.41
SERVER_PORT   8888
SCRIPT_NAME   /rwservlet
SERVER_PROTOCOL   HTTP/1.1
SERVER_SOFTWARE   undefined
GATEWAY_INTERFACE   undefined
SERVER_PORT_SECURE   undefined
ACCEPT   image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD   GET
REMOTE_HOST   test-wam-app
REMOTE_ADDR   09.14.4.41
REMOTE_USER   undefined
AUTH_TYPE   undefined
PATH_INFO   showenv
QUERY_STRING   server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED   undefined
CONTENT_LENGTH   undefined
CONTENT_TYPE   undefined
AUTHORIZATION   undefined
USER-AGENT   Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT   undefined
REFERER   undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile   /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server   rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC   yes
ERRORTEMPLATE   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS   yes
COOKIEEXPIRE   30
ENCRYPTIONKEY   reports9i
DIAGHEADTAGS   undefined
DIAGBODYTAGS   undefined
HELPURL   undefined
RELOAD_KEYMAP   undefined
IMAGEURL   http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON   no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME   /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN   /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG   AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW   /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH   /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP   /tmp
REPORTS_TAGLIB_URI   /WEB-INF/lib/reports_tld.jar
java.class.path   /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
Djay

Ensure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf

Mac OS X combined update can't be saved

I bought the Snow Leopard upgrade disc from Apple two weeksago and the install went with out a problem. I went to check for updates and there’s a rather large OS X combined update 1.06GB.
When I start the download I will generally get about haveway through when the following error occurs:
Mac OS X Combined update cannot be saved.
It says to check my Internet connection, but I can’t find anything wrong with my Internet connection other than it's slow. I’m using a DSL service from one ofthe worst providers in the country.
If I restart the download everything that was downloadedprior will be partially gone. The most recent attempt it went from 520MB downloaded now when I restart it’s down to 81MB downloaded.
Short of me hoofing my iMac to another location is there anyway this update can be downloaded in smaller pieces?

Are you trying to install the update while on-line? If so, download the update .dmg file http://support.apple.com/kb/DL1399 and install it off-line. This is the safest way to install system updates, especially if you have dialup or slow-speed connections.
Another method is to go to a library & take a DVD to download/copy the file.
 Cheers, Tom

Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
Raghava

HI All,
Please help on this issue.
Thanks
Raghava

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

Service tax value required updating while posting GR in MIGO transaction

Dear Friends,
We have a following scenario where service tax value required updating while posting Goods Receipt MIGO transaction.
1. Purchase Order created for first line item where Qty. 1 and Net Rate Rs.1000/- so total Gross value will be Rs.1000/- example Vendor XYZ
2. Freight condition type maintained for the first line item for Rs.500/- and assigned to Transportation vendor ABC.
3. When Goods Receipt Posted for the Material against PO first line item, the material value updates Rs.1500/- (Material value as
    per PO + Freight Charges)
4. After posting GR while making Invoice verification through MIRO transaction against the PO GR/IR clearance will be done for
    Material vendor XYZ. For transportation Vendor ABC Planned delivery cost indicator will be select and since service tax is
    applicable Service tax code will also select.
Here the values of Service tax if the Material available in Stock it will be inventories. If stock consumed before making the Invoice verification for Transportation vendor ABC, then the Service tax values update to PRD account.
We know that in PO, tax code can be select for first line item (Raw Material) Vendor XYZ and if transportation charge condition type maintained for same first line item and assigned to Vendor ABC and there is no provision to maintain Service tax. So the service tax will get inventories while posting Invoice Verification for the transportation vendor.
We want the values of Service tax to update while posting Goods Receipt in MIGO transaction.
Thanks & regards
Dhanu

hi,
Please note at the time of MIGO Servecie tax value does not appear, it will appear at the tiem of Invoice only.
Regards,
Rama Mohan Bangaru

My G5's hard drive died after doing a software update while iPhone was connected.

My G5's hard drive was corrupted and unbootable after doing a software update while my iPhone 4 was connected. Coincidence or related?
Attempts at rebooting produced the file folder icon with flashing question mark. It's been a LONG time since I last saw that.
Disk Utility/First Aid reported that drive had "invalid node structure." The disk could not be repaired because it "could not be unmounted."
Is the failure possibly related to the iPhone being connected at the time of the software update and restart?

Possible the iPhone had something to do with it, but I like to make sure the Disk Directory & Permissions are good before any update.
Was that Repair/Verify done when booted from the Install Disc?
You must repair the HD, if Disk Utility or fsck should fail to repair it then...
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83

The update "Mac OS X Update" can't be saved. ERROR

Hi,
I have been searching these forums for an answer.
Today I had a pop up informing me that update are available.
Mac OX X Update 10.5.7.286 MB
The 10.5.7 Update is recommended for all users running Mac OS X Leopard and includes general operating system fixes that enhance the stability, compatibility and security of your Mac.
For detailed information on this update, please visit this website: http://support.apple.com/kb/HT3397.
For detailed information on security updates, please visit this website: http://support.apple.com/kb/HT1222.
A few minutes into the update I get the message below.
The update “Mac OS X Update” can’t be saved.
The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.
I click on OK to close the message box and the download stops and the download box closes.
Any suggestion why this is happening.
I am on version 10.5.6 Build 9G55
iMac
iMac6,1
Intel Core 2 Duo

Yes I am getting this error and so I got 10.5.7 from Support Downloads but then there was a Safari Beta 4 update and it did the same thing. I'm a little worried after that because I have already had Software Update probs and had to get a brand new MacBook so keep the answers coming
--MacFan95

Recon Account not updating while in MIRO

Hi all..
Im facing the problem: Recon account is not updating while during the MIRO. even though Vendor account is get updated and i have checked in vendor master also the same account has been maintained.
Thanks In advance
Akhil

Definitely wrong forum to ask for this topic. Have you posted this in MM and FI forum?

Excise amount not updating while posting invoice

Dear SCN's,
I have done GRN and captured excise amount and later in invoice posting these captured excise values are not updating. Please help me out where the root cause might be, please share your views were might be the error. And also help me with information of excise tables updating while capturing excise invoice and posting excise invoice.
Regards,
Kumar

For Domestic & Imports Excisable Material Procurement at Excisable Manufacturing Plant
J_1IEXCHDR: Table for Excise header information.
J_1IEXCDTL: Table for Excise item information.
J_1IGRXREF: Table for Excise & Material document reference.
J_1IPART1: Table for Part I entry
J_1IPART2: Table for Part II entry.
For Domestic & Imports Excisable Material Procurement at Excisable Depot
J_1IEXCHDR: Table for Excise header information.
J_1IEXCDTL: Table for Excise item information.
J_1IRG23D : Table for Depot Register.

Cant' update while select is active in read-committed mode

Hi All
I try to execute my java program the following error is comming
"cant' update while select is active in read-committed mode"
I am using prepraredStatement. The query is running successfully in QueryTool or Toad. But the Error is coming while execute this line
"stmt.executeUpdate(); "
pleaes solve my problem..
Thankx

<br>Mmm, it seems same question Re: insert data problem</br>
<br>Nicolas.</br>

Went to France, updated while there, now itunes stuck in French! how do I fix this?

Visited France. Updated while there. Now back and iTunes store, and updates still in French. Do not know how to switch.

That's interesting, because this means that the procedure "Change Country or Region" I suggested above:
https://discussions.apple.com/message/19864939#19864939
...is not the same in the App Store on the iPad as the one in iTunes on the PC.

My iPhone 5s was updating while charging and now it not turning on or charging or reseting please helppp!!!!!

My iPhone 5s was updating while charging and now it not turning on or charging or reseting please helppp!!!!!

In the U.S. $199

Update while typing in numeric control?

So...
When I type a number into a numeric control, it doesn't update until I hit enter or click somewhere outside the control.
Problem is, after entering the number, I want to click on a "go" button
to do something with the new value in numeric control, but unless I
remember to click somewhere else or hit enter first, I'm doing
something with the old value, not the new value.
This gets aggravating.
How to make sure the value of the numeric control gets updated before doing something with it?
"update while typing" exists for string controls, but seems conspicuously lacking for other types of controls...

I cannot reproduce your described behavior: With either a local variable or the numeric control inside the event case, I never see a stale value. Please attach your VI so we can troubleshoot.
Adding a delay to fix something like this is incorrect and dangerous. If a delay solves the problem, it points to a flaw in the code. What if somebody will run your program on a slower computer where it would suddenly need a 12ms delay. You'd be back to sqaure one, dealing with race conditions.
(And why are you using "mouse down" instead of "value changed"?)
Message Edited by altenbach on 03-21-2006 05:22 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Events.vi ‏12 KB

Image update while PS is saving

Similar Messages

Maybe you are looking for