Image vibrations in display slide show on iPad and Apple TV

I am using iPhoto 11 to create slide shows. I use the standard export option for I wish to run the same movie on iPhone, iPad and Apple TV.
Running the slide show in iPhoto the quality is good, however on iPad and Apple TV some of the images become very unstable and vibrate or shake for some seconds.

Rentals are one-time only downloads, they will not show on other devices/computers for redownloading.
If you rent a film on your iPad or Apple TV then you can only watch it on that device. If you rent it on your Mac then you can move it from there to your iPhone or your Apple TV (if it's a first gen Apple TV) : FAQs about renting movies from the iTunes Store :
If you rented the movie on your computer, you can move it to an iOS device or Apple TV (1st generation). To do this, connect the devices and sync using USB. When you move a rented movie from your computer, it will disappear from your computer’s iTunes library. You can move the movie between devices as much as you want, but you can only have it on one device at a time.
If you rented the movie on your iOS device or Apple TV, you can’t move it to any other device.
Renting and moving rentals from a computer : How to rent a movie from the iTunes Store on your computer.

Similar Messages

Slide show in iPAD

I copied photos from my iMac on to my iPad by synchronising. When I try Slide show in iPAD, the "Descriptions" are not getting displayed. Any way I can get the "Descriptions" displayed?
Also, I have some more photos in another login in my iMac. How do I copy these also to my iPad? When I connected my iPad and opened the iMac in the other login, it warns that photos already copied will be deleted.
Thanks and regards
NK

The descriptions won't show in the Photos app. For syncing photos, only the most recent photo sync remains on the iPad, so you will need to include all the photos that you want on the iPad in each sync - synced photos are deleted by not including them in the next photo sync.
There are third-party photo management apps such as Photo Manager Pro (app's how to page) which allow you to copy photos to/from multiple computers or logins (and the Photos app), and which have slideshow options in them.

How do I download a slide show with captions and music to my IPad? It is not happening when I sync.

How do I download a slide show with captions and music to my IPad? It is not happening when I sync.

The way that you would transfer photos from iPhoto to the iPad would be to sync with iTunes. Connect the iPad to your Mac with the cable and launch iTunes. Select your iPad under the devices heading on the left. Then click on the Photos tab in the iTunes window on the right. You can select the folder from which you want to sync your photos in the drop down menu bar - so select iPhoto there. Then select the album or events that you want to sync from the windows below. After you have made your selections, click on Apply in the lower right corner of iTunes.
I am not sure how the iPad will handle a slide show in the photos app that was created on your Mac. You can create basic slide shows on the iPad using the different albums, events or faces that you have in the Photo app, but as for the captioning that you have already set up, I don't know how that will work in the app when you sync the slide show.

Can I mimic a 'slide show' of stills and videos with this technique

I want to be able to mimic an old fashioned slide show on a Blu-ray disk, except that each 'slide' – I'll call them items – could be a true still, or a still with pan/zoom, or even a short video. Whatever a particular item is, I want to click a button and the show advances to the next item. If the next item is a video, the video pauses on the last frame when it is finished.
Just like the old magazine full of slides, imagine a folder full of items – some may be stills, some videos. After importing into Encore, setting up the navigation and menus, and then burning to Blu-ray, I want to be able to play them in sequence at the press of the Enter button.
I'm pretty much a novice with Encore, and to save spending more time reading the manual, I thought I'd ask if I can mimic a slide show in Encore with the technique described below. I got the idea from page 152 of the PDF manual:
The buttons on a menu are the primary navigation tool for the viewer. They control how the viewer steps through the project. Each button in a menu must lead to another menu, a timeline, a chapter, a playlist, a chapter playlist, or a slide show.
My limited experience with Encore is to set up a series of videos on a single timeline, and generate one menu with a "Start" button on it. When the Blu-ray starts up, the Start screen appears and stays there until I press Enter. Works well.
A slide show of stills using buttons only
So I thought: to generate my old-fashioned slide show (ignore videos for the moment), I would use the buttons themselves as the stills, taking my queue from the quote above: "Each button in a menu must lead to another menu…". My slide show would consist of jumping from one menu to the next. This leads to my first question:
Q1: Is it possible for a menu to have a full-screen button, call it the Image Button, that is actually the still image that is desired to be shown? So the viewer sees the Image Button, thinks it's the image (which it is), but it is actually a button. When the viewer presses Enter, the button activates and goes to the next menu which also happens to be the next full-screen image. The viewer is jumping from Image Button to Image Button, with the buttons filling the screen and being the actual images.
A slide show including videos
To include a video in the slide show, the destination when Enter is pressed would be a timeline with the appropriate video. At the end of this video, the navigation would lead to a menu which has an Image Button of the last frame of the video. The effect is that the video is paused on the last frame, waiting for the user to hit Enter to advance to the next item (still or video).
If there is an easier way to mimic a slide show of stills and videos, please let me know.

Stan – I posted 3 years ago in the Keynote Forums (I'm on Mac) about this sort of thing, knowing that eventually I would want to do it. The answer came back then that Keynote might have problems. So I've recently posted again about Keynote, but no responses as yet.
I expected problems with Encore and welcome some of them. Overcoming problems is the best way to become intimately involved with software.
I'm glad you asked why I don't just use Powerpoint (or Keynote in my case). Now's my chance to clarify my thoughts:
Macs do not upscale very well. Sometimes I may want to show part of a DVD. I've tested playing a DVD on my iMac versus on a Oppo BDP93, fed to a BenQ W7000 projector throwing a 3 metre image. There is an obvious difference in image quality because the Oppo, being hardware based, can interpolate in real time as it scales from 576p (PAL) to 1080P. DVD Player on my iMac simply magnifies the image, resulting in obvious pixellation.
Dissolves and complex effects in Premier challenge any software based h.264 player. I don't like to see decoding artifacts, for example, during a dissolve while a part of the image is also reducing in size, spinning, and disappearing into the distance. An extreme example, but an effect I used once. From my reading of blu-ray player reviews – and from my limited testing – all blu-ray players can easily handle the highest bit rates from a blu-ray disk.
I don't have a laptop so I'd have to buy one. I'd rather spend the money on a dedicated player if that route turns out to be suitable.
I don't trust computers for a presentation. Too unreliable. When I was showing multiscreen audio visuals in the 1980s (4-6 projectors), I always had a backup Tascam 4-track with me, back up soundtrack on tape, back up amp, and a backup slide projector. Even had a backup amp in the car. Speakers, well, if one failed I had two there anyway. With digital, to feel comfortable, I'd have to buy a second laptop. A good quality, backup Blu-ray player can be had for $100. And yes, I do have a backup W7000. I don't trust digital projectors either.
Running a presentation from a laptop always looks amateurish to me. Someone hunched over a tiny screen, fooling around with Windows or OSX. And usually it's all mirrored on the big screen for everyone to see. I'm never impressed. I want to replicate a cinema experience as closely as possible. Darkness, the audience hushed, and up comes the first image.
Any suggestions about automatically linking a whole heap of menus?

Best way to create slide shows in PE4 and PSE 6

What's the best way to create a fancy slide show in PE 4 and PSE 6? I need to create a slide show of about 600 pictures. I'm on Windows XP with 3gb RAM. I've done this a few years ago in earlier versions of PE and PSE. Before i plunge into this again i wanted to get some overall guidance for what to do or not do.
My ultimate goal is to create a slide show that:
1. uses pan and zoom on every photo
2. transitions between every photo
3. has an audio track
4. has some nice special effects -- words and graphics that appear on slide at precisely the right moment to match the song, and stay on the screen as one slide transitions to another. i want the text to be able to move and fade in and out.
My view is that it's easy to accomplish #1-3 in PSE 6; it's quite simple to create a slide show, add pan and zoom, and transitions. However, #4 is not doable because adding text and graphics can only be done on a slide at a time and only when the slide start/stops (i.e., you can't have text appear 2 secs after the slide has started displaying and stay on screen while the next slide appears). Need PE 4 to do that.
What i'm wondering is:
-- is it best to create the basic slide show in PSE6 and then export to PE 4 to do the final fancy stuff, or is it best to just create the show in PE4? Seems that doing the pans, zooms, and transitions are easiest in PSE 6.

eric,
I am going to offer some reasons NOT to start this slide show in Photoshop Elements. This is despite the fact that I have used the workflow of starting in Photoshop Elements and used the Send Slideshow to Premiere Elements in PSE5 - PE 3 and PSE7 - PE7.
1- Timing differences between the PSE and PE slide show construction and processing
There are many differences in timing between the two products. Transitions can start/end slightly offset from their timing in PSE once they arrive and are processed in PE. Same for pan and zoom. Does this matter? Well the more precise your timing, the more potential for a show stopper.
Example: one person who wanted continual motion using pan and zoom needed to go modify the transition positioning and the keyframing of the pan/zooms on every single slide after sending a slideshow from PSE to PRE.
2- your requirement to
"words and graphics that appear on slide at precisely the right moment to match the song, and stay on the screen as one slide transitions to another. i want the text to be able to move and fade in and out."
You can't really sync the audio to a slide in PSE. The text can't move or fade in/out. I think that it will be more grief to retrofit these functions to a slide show that was created in PSE than it will be to do the all the work in Premiere Elements.
3- "Add the sound track for the ENTIRE slide show (this will be longer than i currently have slides for because i don't have all the photos"
I am suspicious that adding the ENTIRE sound track in one PSE slide show will not work.
I have done multiple sends from PSE slide show editor to Premiere Elements. However, I decided on the approach of using no audio in the PSE slideshow editor and adding Audio in Premiere Elements AFTER sending all the slide shows.
Again, your objective of syncing specific photos to music points is good artistically - but I am concerned that it will make your PSE to PRE workflow problematic.
4- "as new photos arrive, do the arrangement/pans/zooms in PSE and move them to PE"
As Steve mentioned when you do subsequent sends of the slideshow, it appends to the end - does not seem to fit your objective of replacing part of the middle.
Also if you get new photos in for the second section of the slideshow - but over in Premiere Elements you had already made other changes in the second section. There is no function to combine new changes doen in PSE and changes done in PE for that same "section" of the slideshow.
5- you did not say whether you will be outputting this slide show in Full Screen or Widescreen format. Will you be burning a DVD? If you will be doing widescreen output, additional problems with specifying pan/zoom in PSE have been identified on various forums because the PSE pan/zoom boxes are not widescreen aspect ratio.
Conclusion:
Some of my comments here are definitely subjective - however, it is my overall conclusion that your objectives and work plan are not a good fit for the Photoshop Elements slide show editor to Premiere Elements workflow.
My perspective on the Photoshop Elements slide show editor is that it is designed to simple, quick and easy. Therefore it has limitations.

I'm trying to share to Media Browser a 20 minute still slide show with music and text. I have tried several times to save at 1080 HD, but just before it's finished, a message box pops up saying "File already open with write permission." What's this mean?

I'm trying to finalize/share to Media Browser a 20 minute still slide show with music and text. I'd like to finalize it 1080 hd and have tried several times, but just before it's finished, a message box pops up saying it can't be done because "File already open with with write permission." What does this mean? All files are closed; this iMovie project is the only thing open. Does it mean one of the song files from iTunes? And should I just settle for saving it as a "large" file, which is what I'm trying right now?
Thanks,
Jamie

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
See also this post
https://discussions.apple.com/thread/4434104?tstart=0
Yours Bengt W

I am putting together a slide show using iphoto and I wanted to add a description on each slide/photo. How can I do that? Also on the choice of music for the silde show, if the slide show is longer than one song can you chose a different song for backgrou

I am putting together a slide show using iphoto and I wanted to add a description on each slide/photo. How can I do that? Also on the choice of music for the silde show, if the slide show is longer than one song can you chose a different song for background music?

This might help
http://www.apple.com/findouthow/photos/#slideshow
Regards
TD

My mac, ipad and apple tv share the same itunes account. Why do movies rented from itunes on my ipad or mac not show up in my apple tv? is there a way to get them there?

My mac, ipad and apple tv share the same itunes account. Why do movies rented from itunes on my ipad or mac not show up in my apple tv? is there a way to get them there?

Rentals are one-time only downloads, they will not show on other devices/computers for redownloading.
If you rent a film on your iPad or Apple TV then you can only watch it on that device. If you rent it on your Mac then you can move it from there to your iPhone or your Apple TV (if it's a first gen Apple TV) : FAQs about renting movies from the iTunes Store :
If you rented the movie on your computer, you can move it to an iOS device or Apple TV (1st generation). To do this, connect the devices and sync using USB. When you move a rented movie from your computer, it will disappear from your computer’s iTunes library. You can move the movie between devices as much as you want, but you can only have it on one device at a time.
If you rented the movie on your iOS device or Apple TV, you can’t move it to any other device.
Renting and moving rentals from a computer : How to rent a movie from the iTunes Store on your computer.

After updating to ios 8.0.2 .when i'm unlocking the mobile wallpaper dont display . its shows only network and battery status .

after updating to ios 8.0.2 .when i'm unlocking the mobile wallpaper dont display . its shows only network and battery status .
then i need to switch off and switch the iphone. per day i'm doing this for 3 times.
mean while if some one calls ,its not displaying who is calling.
need to rectify this ASP

Hi Tarun 49,
If you are having issues with your iPhone such as you describe, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L

Imported slide show into PE11 and some pics rotated unexpectedly, How can get back to horizontal?

Imported slide show into PE11 and some pics rotated unexpectedly, How can get back to horizontal?

winkhi
Just what are the pixel dimensions of these photos that are automatically rotating on you in Premiere Elements 11 workspace after being transferred there from the Elements Organizer Slideshow Editor? Do I have that correct? If so, how are you making the transfer....Edit with Premiere Elements Editor, Burn to Disc, or other as Elements Organizer 11 Slideshow Editor output?
What is the scenario...from the camera to the computer hard drive, landscape; from the computer hard drive to the Elements Organizer 11 Slideshow Editor, landscape; from the Elements Organizer 11 Slideshow Editor to Premiere Elements 11 Project Assets/Timeline, rotated to Portrait?
Do you find that the frequency of the problem is related to pixel dimensions, number of photos used? What is the format of these photos, jpg or other?
Are you using the Rotation option in the Applied Effects Tab/Applied Effects Palette/Motion Panel expanded to correct the photo rotation?
Just some thoughts for now.
ATR
ATR

How do I create a slide show from iphoto and export/send slide show within an email/, how do I create a slide show from iphoto and export/send slide show within an email/

how do I create a slide show from iphoto and export/send slide show within an email/, how do I create a slide show from iphoto and export/send slide show within an email/

You don't.
Slideshows are exported as movies and these are very large files. Email is not an appropriate medium for very large files as they can cause immense issues for the receiver.
Better to share some other way.
Regards
TD

The best Slide Show with CS2 and...

SOS can anyone help. I have PS CS/2 running on PC with XP and want to produce slide shows with music and possibly narrative that can be viewed and heard via CD/DVD Web etc. What is the best solution - do I need Elements, what do people suggest.

ProShow Producer

TS3376 The find my iPhone app shows my iPad and iPhone in a totally different location about 100 miles away and my devices are in my lap? I'm confused ...

The find my iPhone app shows my iPad and iPhone in a totally different location about 100 miles away and my devices are in my lap.... I'm confused ...

Any thoughts on this , I'm worried that someone has cloned my device Id and is phishing , or would there be just a major glitch in the GPS ? I have turned off the location app and turned it back on to see if it was a glitch still comes up to the same location about 100 miles way to a place I have never been. Help !

I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.

I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation. Try to export to an external HD attached, all help would be gratefully received

Have you ever successfully saved anything to that external drive? My first two thoughts are that the drive isn't formatted for the Mac or that you don't have rights to save to the drive.

18000 and 200gb of iCloud storage how do i up load to iCloud and view them across my iPhone iPad and apple tv?

I have 18000 photos and i have to signed up to 200gb of iCloud storage how do i up load to iCloud and see them across my iPhone iPad and apple tv?
I have dragged my entire library over to the iCloud icon on the left side menu bar on my iMac iPhotos.
i have also signed into iCloud.com but can only see recent few photos taken today on my iPhone and when i have gone to import i can not import for my iPhotos app?
How do i get these to the cloud to view across my devices?
What settings do i need to use on my iPhone and iPad?
Or is iCloud not the best way to store and view my library?
Thanks Spud

You are a bit early.
Wait for a few month. iCloud Photo Library (Beta) and the Photos.app for Mac are being beta tested now and will be available soon on your Mac. Then you can store your photo library in iCloud and keep optimised versions of your photos on your Mac locally, with the full sized versions in iCloud. And all your devices will be able to access the photos in iCloud.
See Apple's preview of the new Photos for Mac: http://www.apple.com/osx/photos-preview/
Fill your library, not your device.
iCloud Photo Library can help you make the most of the space on your devices. When you choose "Optimize Mac Storage", it stores all your full-resolution photos and videos in iCloud in their original formats, while keeping storage-saving versions on each device. When you make an edit, the original image will download automatically. You get 5GB of free storage in iCloud — and as your library grows, you have the option to choose a plan for up to 1TB.
and also: Photos for the Mac Is Clean, Fast, Connected — and Unfinished
The iPads and iPhones can already do it, but the Mac can only access this library using the web interface, see: iCloud Photo Library beta FAQ
Use the time, till Photos will be released, to consolidate your photo library. Get all places and faces tagged, all keywords, titles, and ratings ready, duplicates removed, events and albums well structured, and when Photos will be released, you can simply let it migrate the iPhoto or Aperture library to iCloud Photo Library. Enable "Optimize Storage" and you will be able to have the bulk of your photos in iCloud.

Image vibrations in display slide show on iPad and Apple TV

Similar Messages

Maybe you are looking for