Image width difference from flash and photoshop while rotating

Hi,
     ->     I have loaded a image in the flash and a copy of a image in photoshop.
     ->     Then i have checked the width of a image in both the application and they look same.
     ->     In flash window>transform>angle i have given angle 0.7
     ->     In photoshop Image>Image Rotation> Arbitary i have given angle 0.7
     ->     I have checked width of a image in both the application and they are not same.
     Couldn't able to figure it out the reason for the change. Could any one assist me for the same to acheive the same.
Thanks and Regards,
Kamesharan A.

Something like 0.7 won't really show up very well for an example so here's PS CC and Flash CC rotating (approx) 200x200 px red square 20 degrees. They look pretty exact to me (although drawing and placement was done by hand so the slight difference in position is me). Rotation looks good.
Here's what I get from measuring width (but of course the width is of the rotated object), 256px or so on both:
For hand drawn 200px squares (one is 199.2px, etc) that's showing you it's pretty exact.
Mind you if you do a Image Rotation (I did a transform) then it will rotate in Photoshop via a different point. The rotation of the object itself looks the same (and the width is 257) but it's just positioned differently.
Your results should be similar.

Similar Messages

Whats basic difference between data and types while declearing the itab

whats basic difference between data and types while declearing the internal tables...
DATA : BEGIN OF t_vbap OCCURS 0,
vbeln1 LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
kwmeng LIKE vbap-kwmeng,
netpr LIKE vbap-netpr,
netwr LIKE vbap-netwr,
werks LIKE vbap-werks,
matnr LIKE vbap-matnr,
arktx LIKE vbap-arktx,
   END OF t_vbap.
vs
   TYPES : BEGIN OF t_vbap,
vbeln1 LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
kwmeng LIKE vbap-kwmeng,
netpr LIKE vbap-netpr,
netwr LIKE vbap-netwr,
werks LIKE vbap-werks,
matnr LIKE vbap-matnr,
arktx LIKE vbap-arktx,
   END OF t_vbap.
and vs
TYPES : BEGIN OF t_vbap,
vbeln1 LIKE vbeln,
posnr LIKE posnr,
kwmeng LIKE kwmeng,
netpr LIKE netpr,
netwr LIKE netwr,
werks LIKE werks,
matnr LIKE matnr,
arktx LIKE arktx,
   END OF t_vbap.

hi,
like -> used for refering existing data elements in data dictionary or in sap
type -> used for refering existing data types in sap.
types: used for creating used defined structure of tables which has fields from more tahn one table.
diff b/w types and type in creation of internal tables is that when u create a table with types then u can use same for work area creation also.
ex:
TYPES : BEGIN OF t_vbap,
vbeln1 LIKE vbeln,
posnr LIKE posnr,
kwmeng LIKE kwmeng,
netpr LIKE netpr,
netwr LIKE netwr,
werks LIKE werks,
matnr LIKE matnr,
arktx LIKE arktx,
END OF t_vbap.
data: itab1 type t_vbap
        wa_itab1 type t_vbap.
when type is used then u have to create a defintion of work area for another time when internal table doesnt have headr line as
ex:
DATA : BEGIN OF t_vbap OCCURS 0,
vbeln1 LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
kwmeng LIKE vbap-kwmeng,
netpr LIKE vbap-netpr,
netwr LIKE vbap-netwr,
werks LIKE vbap-werks,
matnr LIKE vbap-matnr,
arktx LIKE vbap-arktx,
END OF t_vbap.
DATA : BEGIN OF wa_vbap,
vbeln1 LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
kwmeng LIKE vbap-kwmeng,
netpr LIKE vbap-netpr,
netwr LIKE vbap-netwr,
werks LIKE vbap-werks,
matnr LIKE vbap-matnr,
arktx LIKE vbap-arktx,
END OF wa_vbap.
if helpful reward soem points.
with regards,
suresh.

Flash and Photoshop

Is it possible to edit photoshop pages and than have flash
read them as webpages?
I have downloaded an online template that has flash and
photoshop files. I was wondering if there is any way I would be
able to edit photoshop files and flash would recognize them.
Instead of editing the flash file directly.

I agree with _xchanin.
Look for the dropbox and you can select what scene you want
to edit.
What version of Flash are you using ?

HT202574 what is the difference between Flash and Fusion Drives?

what is the difference between Flash and Fusion Drives?

Here's Apple's explanation Mac mini (Late 2012 and later), iMac (Late 2012 and later): About Fusion Drive - Apple Support

What's the difference between flash and premier

I know Flash is usually used for game production and Premier for video creation, but I saw poeple also can use Flash for video production as well. So I need to know what are the differences between the two of them.

Flash is used most often for animation, and especially interactive animation.
Premiere is used for video production, but with certain limitations, such as version support, or lack of it, can work with Flash animations.
There is some cross-over, just as there is with Premiere and After Effects, but each program has specific uses.
Good luck, and that is the very short answer. Others will likely be able to give you a point-by-point difference between Flash and Premiere.
Hunt

Difference between Flash And AIR

Hi,
Actually, What is the difference between Flash and AIR

At a very high level, Flash Player is a plugin used by browsers to display Flash content typically hosted on a server. AIR is a runtime that displays a superset of Flash Player content, but does so in an application format installed on the users system or device. In addition, there are differences in how the two interact with the file system and security policies.
http://www.adobe.com/products/flashplayer/faq.html

Image width differed from exported illustrator and coreldraw emf

Hi,
when exporting a 7cm width EMF image from illustrator and corel draw, the image size is getting differed when EMF is imported to framemaker. coreldraw exported EMF gets correctly fitted in the framemaker 7cm template whereas illustrator EMF doesnt do. Do i have to do something with the framemaker or adobe illustrator setting. Can anyone please help?

Hmmm. Interesting. I ran a test (and this is in FM7.1/Unix).
I used a recent 3.11 inch wide vector image from Illustrator. Keep in mind that in vector space, the dimensions are usually to stroke center-lines, and do not account for stroke width. If I open this in Photoshop, it does account for stroke width (we use 0.22 pts) and the width is 3.142.
I saved the image as EPS, and exported to EMF and WMF.
FM reports the vector EPS width as 3.125 (this is probably just the 1/72 preview round-off).
FM reports the EMF width as 3.691. The preview is blank. The image prints blank. I don't use EMF, and may have bungled this this test (or FM7.1 hasn't an ideal filter for it), but the size disparity is the same ratio you are seeing.
FM reports the WMF image as 3.115. The preview is raster. The image prints as vector, but is degraded. It looks like all the vector coordinates have been snapped to new grid points in a fairly coarse grid.
My suggestion: use EPS.
Encapsulated PostScript is the oldest and most stable graphics file format that FM supports. It supports vector, raster, text or any composites thereof. It gets minimal filtering on import, and is likely passed through to the output as-is. The only downsides are a coarse (but fast) preview image (and the size jitter that comes with that). There is a workaround for the coarse preview.

Printing from InDesign and Photoshop - colors don't match

I'm printing the same CMYK image from Photoshop and from InDesign, to a HP desktop color printer. I'm using CS3, all the color settings are identical in both programs, but the printed colors don't match. Any suggestions would be greatly appreciated.
(cross-posted in InDesign forum)

I have had the same problem: an image printed from PS differs from the same image printed from ID. However, I can't very well print as bitmap from ID since the image is part of a spread, including text. I have tried various combinations of settings. I made the PS image to 100% of the ID final size (in the layout). I tried various print dialogue settings (high transparency flattener, medium transparency flattener, color managed, not color managed, CMYK output and leave unchanged ... every combination I could think of). ID does something on printer output. My understanding (at least from CS2) was that ID output to printer uses a PDF format of some sort. I had the idea maybe the ID output did some sort of resampling or re-rendering of the image, but have not prooved that out. I did get some slight improvement in the ID output when the image in the ID layout was put in at 100% (whereas it had been 88% (the original image being bigger than the ID layout size). What I am getting now in CS3 is a clean looking photo in PS, but in ID, skin tones look somewhat blotchy and a bit more saturated. The PS image is better than ID, and while ID is not bad, why is it not as clean as PS? I can definitely see the difference between PS and ID output and know it will show on press, too. Any suggestions?

PDF quality problems exporting from InDesign and Photoshop

Hi There.
I'm having big problems exporting my InDesign files to PDFs and retaining the res. And it's not just the images (I understand about the dpi) it's the type on there too.
I have been exporting as the preset High Quality Print - is this wrong. Are there other settings to ensure the PDF I export retains the high-res quality and clarity?
At the moment it comes out high-res when I export it as a jpeg or eps but not PDF.
I have also noticed the same problem when I export to a PDF from Photoshop.
I really need to create interactive and high quality print PDFs from my InDesign files.
Please can you advise.
Thanks
Karen

I am also having problems with pdfs exported from Illustrator and Indesign recently. I didn't have these problems before, so I don't kno if something has changed in my settings that I am unaware of.
When I use the 'japanese dots' border in Indesign, it shows on the pdf as a kind of dotted line. I'm exporting as 'High Quality Print'. I switched to Illustrator and drew a line with the pen tool, and converted it to a dotted line; it looked just how I wanted in in Illustrator, but as soon as I exported it, the same thing happened.
I have used the 'japanese dots' border in the past, exporting as 'High Quality Print', and not had this problem.
Does anyone have any suggestions?

Importing issues with Final Cut Pro X. Green flash and twitches while play back

Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
Here is a screenshot of the green screen that I'm talking about:
[URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
More information:
My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

Firing an external app from flash and pass parameters

Hi all,
I need to fire an exe from flash projector and pass it a lot
of parameters(need to regenerate an image). Could someone tell me
what would be the best solution for this... can I make a php
executable which could use all the gd functions? If yes, can you
please write a brief tut or provide some guidelines.
Thanks

then use:
fscommand("exec", "correctanswer.exe");

How to import layers from Flash into Photoshop?

I can do it from photoshop into flash but I can't work out how to do it the other way round. Basically I want to draw my frames in flash and then colour them in photoshop
thanks

Quote from the Reference:
Open a 3D file
Photoshop can open the following 3D formats: DAE (Collada), OBJ, 3DS, U3D, and KMZ (Google Earth).

Difference between InDesign and Photoshop PDFs for printing?

Hi, rather new to the whole printing business, forgive me.
I have both InDesign and Photoshop, but I am better versed in Photoshop. Is there a significant difference between the capabilities for saving a PDF for print between the two? Also, would someone else be able to tell which program I made the PDF with?
Thanks in advance.

Like most operations, one tool or the other is more appropriate according to the makeup of the task. It's not just about which PDF is somehow "better," (there are many ways to produce PDF's, and the quality of output isn't necessarily directly dependent upon the originating application), but rather which tool is the correct one for the job.
For instance, a movie poster can certainly be done completely in Photoshop to good effect. But, if I was laying out the pages of a textbook, where images and longer passages of paragraph-based text were to be mixed, the typographical and document assembly capabilities of InDesign would be indispensible. That's just an example. The very essence of art and design is learning and devising ways to use the available tools alone and in combination to produce a particular result, effect, or solution.

Why does Photoshop produce images that are from source data Photoshop can't read?

I am getting this message "This image was generated from source data that Photoshop cannot read. That data will be discarded." When I open the image the data that has been discarded consists of the layers that were created in Photoshop. I don't understand why Photoshop can't read data created in Photoshop.

Thank you for the info. I only have one version of Photoshop on my computer. The one I created the images with won't open them. However, I did have a version of Lightroom on my computer that I removed today. It was newer than my version of Photoshop. I am hoping that without Lightroom on my computer I will not have any more problems. (cross all my fingers) The images that are corrupted are missing data. The Metadata is missing and the layers are missing from the files. If the metadata is missing they won't open at all and if the layers are missing they will open up flattened, some of them are corrupted with data and color switched every which way in the image.

Colors are printing incorrectly when exported to PDF but print fine from InDeisgn and Photoshop

Documents I create in Photoshop and InDesign and export to PDF print in different/wrong colors. The colors are fine when printed directly from Photoshop or InDesign, they look correct when viewing the PDF, but change when printed from the PDF (specifically blues print as purple). How do I fix this?

This really sounds like a color management issue.
How are you creating the PDF files from InDesign or Photoshop? We recommend using the PDF/X-4 settings for proper printing from Acrobat or any direct PDF RIP/printer.
Also would like to know what type of printer you are printing to.
- Dov

Image width difference from flash and photoshop while rotating

Similar Messages

Maybe you are looking for