Image Window Problem

Please advise why my image windows fly to the left of the screen when I select 'float in window' or float all in windows in the work space tab. If I drag the window back to where I want it, it flies back to the left of the screen. I'm using Windows 7 Prof. Thanks for help. Paul

Hi,
Are you using photoshop cs6?
Have you installed the latest photoshop cs6 updates by going to Help>Updates from within photoshop?

Similar Messages

Photoshop CS2 redraw garbage when moving around an image window on my G4 laptop

Hi.I recently had to reinstall Photoshop CS2 onto my Mac Laptop 1.5 GHz PowerPC G4, running system 10.4.11, which required a new hard drive after the old one died. I am immediatly encountering a serious redraw/image repositioning problem in Photoshop that I have never seen before, and in Imageready as well. This does not happen in Macromedia Fireworks 8 however.
I am zoomed into an image. Using the hand tool, or the scroll bars or the arrows, as soon as I move an image little messed up line graphic glitches appear and stay in place for the remainder or working with an image, and ultimately covers the image completely after moving around within it a number of times. you can see examples of this in these screenshots I've uploaded:
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage04.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage03.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage02.gif
and the lines stay the same size and position even when zooming in. here's the same image w/ the same defects zoomed out and in:
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage01.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage01_zoomed.gif
I've tried trashing & re-installing photoshop completely, tried running it before the updates needed from the original Photoshop application disk, and after. still the same problem.
This occurs only when using the laptop on its own. When I hook it up to my Apple Studio Cinema Display, it works fine. The problem does not occur on the Cinema Display OR the laptop screen! it's very odd. Basically, the laptop is now something I cannot actually use away from my desk until this is resolved.
Has anyone ever encountered this or possibly have any suggestions or advice? Thanks so much!
-Rich
And here are some more specs on my computer & hardware:
Hardware Overview:
Machine Name: PowerBook G4 12"
Machine Model: PowerBook6,8
CPU Type: PowerPC G4 (1.5)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.25 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.0f0
Serial Number: 4H5456AZRJ7
Sudden Motion Sensor:
State: Enabled
Version: 1.0
GeForce FX Go5200:
Chipset Model: GeForce FX Go5200
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0329
Revision ID: 0x00b1
ROM Revision: 2122
Displays:
Color LCD:
Display Type: LCD
Resolution: 1024 x 768
Depth: 16-bit Color
Built-In: Yes
Core Image: Supported
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Cinema Display:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
DIMM0/BUILT-IN:
Size: 256 MB
Type: Built-in
Speed: Built-in
Status: OK
ATA Bus:
MATSHITADVD-R UJ-845E:
Capacity: 1.72 GB
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk5
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
OS9 Drivers: No
S.M.A.R.T. status: Not Supported

Hi. Thanks for your responses. There is definitely some incorrectness in the info I provided about the computer. for the Hard Drive, it's odd.. I copied and pasted that from my system profiler.. In actuality the Hard Drive is 74.53 GB. Not sure how that error occurred.
Also I looked again at the computer's memory. I forgot the second larger 1GB memory card when I was copying and pasting from the system profiler. Sorry about that. I was in a but of a rush to get the question out.
DIMM0/BUILT-IN:
Size: 256 MB
Type: Built-in
Speed: Built-in
Status: OK
DIMM1/J31:
Size: 1 GB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
Another thing I noticed about the problem I'm facing is that it leaves defects from mouse trails as well in the image window. None of the defects are lasting nor will they print. I close the file and they go away, if I zoom, they stay the same size. I'd agree, it sounds like a video card problem, but the reason I posted here is that only in photoshop and imageready do these problems occur. My guess, if it's the video card is that they are just programs that require more of the system. why my video card would be crapping out now, I have no idea. but I guess that's how it goes.
But why would it work fine when hooked up to the apple cinema display? even on the laptop screen itself the problem is not present. only when the laptop is on its own.
The computer has served me very well for almost 3 years without this problem, so that's why it's something that is not a normal problem that should be expected from this computer. I am grateful to have it & can't afford a new one.. this one is still sitting on my credit card balance. Thankfully I am under the applecare protection plan and will bring it in to the local Mac shop on monday and demonstrate the issue to them.
Thanks for your replies.

My iMac 27" Late 2012 has Image Persistence Problem

I'm wondering what to do about an annoying image persistence problem on my 27" late 2012 iMac. I got the iMac just a few days ago. Monday actually, so 4 days ago.
It's the 3.4GHz i7, 8GB, NVIDIA 680MX 1TB fusion drive model.
Overall it has become the love of my life, but the image persistence thing is getting harder to ignore. This happens after only a few minutes of use. If I follow Apple's instruction on dealing with LCD image persistence, I can make it go away for a while, but it comes back very quickly.
It is extremely noticeable on a plan dark background. It looks as thought he screen has been left on for a very long time with the same windows open, but it occurrs in less than 5 minutes of use with nothing more intense than a bit of web surfing.
I've read that this is happening a great deal on these new iMacs, particularly teh 27" machines.
While the problem seems to be known to those of us afflicted I don't know if Apple has acknowledged an issue or not.
Here is a sample of the complaints: http://forums.macrumors.com/showthread.php?t=1509571
I can make the ghost image vanish by bringing up an all white scree for a minute or so or using LCD Scrub.
I'm wondering if anyone else has foun a solution other than asking for a replacement computer, which Apple seems to be granting on this issue?

Avoiding image persistence on Apple (IPS) displays
Avoiding image persistence on Apple LCD displays
If you cannot resolve the issue yourself, then return the computer for a replacement. You may do this freely within 14 days from date of purchase, so don't delay.

Error: BG: saplpd_open_dc failed, msg = 808 SAPLPD:Windows Problem

Dear Friends,
We are giving print from Citrix. BUt the print iis giving me following problem.
Please suggest on the same.
(6:14:29 PM) Number of processors: 2
(6:14:29 PM) Icon DLL loaded.
(6:14:29 PM)
(6:14:29 PM) Network Communication via SAP-NiLib
(6:14:29 PM) Hostname: THMUMGDCCTX02
(6:14:29 PM) IP Address: 16348016.2673954.2011564330.1225156
(6:14:29 PM)
(6:14:29 PM) SAPLPD Version 6.29 for Windows/NT (OPT) is listening
(6:14:29 PM) OS-Info: version = 5.2, build = 0/3790, text = Service Pack 2
(6:14:29 PM) Copyright © 1992-2001 SAP AG
(6:14:29 PM)
(6:14:39 PM)
(6:14:39 PM) Receive job for printer BKC_7thFlr_HPColor3800 on THMUMGDCPS01 (from BKCDT (Berkeley LPD protocol / RFC1179)
(6:14:39 PM) send_status called
(6:14:39 PM) send_status called
(6:14:39 PM) send_status called
(6:14:39 PM) send_status called
(6:14:40 PM) send_status called
(6:14:40 PM) Job 000001723200001.PRD for user ATINJ queued.
(6:14:40 PM) Start printing job 000001723200001.PRD on printer BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT
(6:14:40 PM) Error: Cannot create Printer Context, text = Overlapped I/O operation is in progress.
(6:14:40 PM) Error: The printer BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT is unknown to Windows Print Manager.
(6:14:40 PM) The following printers are currently defined:
(6:14:40 PM) Printer = BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT1017) IN SESSION 11
(6:14:40 PM) Warning: Printer name contains spaces.
(6:14:40 PM) Please rename printer, before using it from R/3 or UNIX!
(6:14:40 PM) Printer = MICROSOFT XPS DOCUMENT WRITER (FROM BKCDT1017) IN SESSION 11
(6:14:40 PM) Warning: Printer name contains spaces.
(6:14:40 PM) Please rename printer, before using it from R/3 or UNIX!
(6:14:40 PM) Printer = MICROSOFT OFFICE DOCUMENT IMAGE WRITER
(6:14:40 PM) Warning: Printer name contains spaces.
(6:14:40 PM) Please rename printer, before using it from R/3 or UNIX!
(6:14:40 PM) Error: BG: saplpd_open_dc failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll
regards
Jiggi

Hi,
You are getting the error because the printer name is greater than 40 characters.
The SAPLPD can only recognize printer names with 40 characters or less.
From the log, i believe you are using the printer BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT1017) IN SESSION 11
but the SAPLPD is recognizing only till BKC_7thFlr_HPColor3800 on THMUMGDCPS01.
Try to change the printer name .. it will work

Problem: codebase, jar and image reloading problem please help!

Hi Java Gurus,
I have written an applet that extends JApplet for viewing webcam. In order to reduce the download time I put my classes into a doorcam.jar file. The following is my <applet> tag in my html file.
<applet code="CameraApplet.class"
archive="doorcam.jar"
codebase = "webcam/classes"
width="375" height="475">
<param name="imagePath" value="http://judge/webcam/images">
<param name="webCamImage" value="door.jpg">
<param name="COMPort" value="COM2">
<param name="frameRate" value="10"> 
<param name="host" value="judge">
</applet>
The fist problem is that my class file does not get loaded from the jar file if i provide the "codebase" attribute as above. Instead the browser load every single class file from the webserver. This has some problem too. Coz the browser sometimes just thorough NullPointerException or ClassNotFoundException. After much of debugging I found out that the problem is the IE browser which seldom fails to load classes or image file from the server. If i referesh the browser the applet and all its classes loaded successfully and runs smoothly. This behaviour never occurs when running with "appletviewer".
I wanted all my classes to be loaded from my jar file. After much of trial and error I found out that if i remove "codebase" attribute the browser loads the classes from my jar file and applet loads very fast. This is where the second problem comes in. The browser does not reload my webcam image file so that the webcam become alive with live images, like before.
If I run on "appletviewer" everything works fine my web cam is displayed properly. But in IE browser the image does not get reloaded when I refresh my image to give live to my webcam display. The refresh method is given below.
private void refresh(final URL url) {
Image webCamImage =getImage(url);
webCamImage.flush(); // flush out the previous image
webCamImage = getImage(url); // get a new image
webCamImageIcon.setImage(webCamImage); webCamImageIcon.paintIcon(webCamLabel, webCamLabel.getGraphics(), 15, 15);
When I add the "codebase" attribute back, the image gets reloaded for every refresh() and everything works fine. But the classes are also loaded from the server. And occasionally also suffers Class loading and image loading problem. As I presented earlier, when I do refreshing in the browser everything gets loaded and the applet function correctly with web cam displaying very well.
The problem is so strange that I could not find any way to solve it.
It would be a great help to me if somebody provide me some work around to the problem.
I tested on Windows 2000, Windows XP, IE 5.5, IE 6 with J2SDK 1.4.0.
Thank you all very much in advance.
best regards,
Judge

Thank you so much for the suggestions. I did tried the way u suggested. The problem still the same.
I think its the problem between IE browser and Java Plug-in.
I which SUN would find these incompatibilities and solve these problems.
I even tried using java SDK and plug-in 1.4.1 it even worst. It can't even load an applet. And it does not show any loading messages nor any error messages. It just show a cross sign on the upper left coner.
I would be so glad, if Sun would try to eliminate the inconsistancies such as caching, loading, initializing etc between browser and its Java plug-In. For example, applets behave well in appletviewer and behave unpredictably in browser environment.
I have seen so many people in the forums with all sorts of problems because of this.
Right now I m desperately looking for work around to my problem.
If somebody would provide me with the solution to my problem it would be a great help to me.
thank you all so much.
best regards,
Judge

How to draw an arc in the image window?

Now I try to draw an arc in the image window, but when I try to use IMAQ Overlay Arc.vi, it need Bounding Rectangle that made a problem because the arc I draw has a big size whose bounding rectangle was out of the image window. What should I do?

Hello,
Bounding rectangle parameters will allow you to enter larger values than your image size as well as negative numbers in order to position your arc properly.
I hope this helps!
Regards,
Yusuf C.
Applications Engineering
National Instruments

HP Deskjet 3050A J611 series - error message -Bad image windows\system 32\d3d 10 warp.dll

I use the HP Deskjet 3050A J611 series printer with my laptop and a desktop PC. It works fine with the laptop but when I installed the software onto the desktop the window error message Bad Image Windows\ System 32\d3d 10 warp.dll kept popping up every few minutesd. By a process of ilimination I discovered that it was the Photo Creations that was causing the problems, when I removed it all was good and I was able to use the printer. The only problems is that I now cannot print photos from my pc. I have windows 7.
Can anyone help please?

Hi Chris.
That error message comes from Direct3D, which is part of the DirectX software in Windows. It appears that part of the DirectX environment on your computer is corrupt. Microsoft provides a diagnostic tool that should help you sort this out. Please see http://windows.microsoft.com/en-us/windows-vista/run-directx-diagnostic-tool
If that does not solve the issue, you may want to reinstall the device driver for your graphics adapter.
When all's running smoothly, you can reinstall HP Photo Creations to print again. Our customer support team would be happy to help with the reinstallation. You can reach them at www.hp.com/global/us/en/consumer/digital_photography/free/software/support-form.html
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Image window maximize over title bar and tools

Hi,
im working on a PC , with windows 7, with photoshop CS5
i searched everywhere for answer , but none was given..
people did mention this problem, but for different photoshop versions , and, i had it good till i dont know what happened and changed it, so i believe it is fixable but people understood it wrong.
anyhow, the problem is, when you try to maximize the image window (assuming you changed it from tabs), the window maximize all over the screen, over the tools and title bar.
instead of staying inside the workspace.
as i mentioned, it used to be like it , but something happened and now its all over the thing.
i tried double click the hand tool, all sort of things with the "F" and Tab shortcuts, the arrange documents thing on the top, even trying to restore default setting but nothing really did the trick.
i tried to look for something called "Application frame", that somehow suppose to do just that, under window->Application frame, but its not there.
again, it used to be ok so i know there is still hope..
here it is restored, under "fit screen" option, notice it only get the hight right, i would not call it "fit screen" but what ever..
red circels show the title bar and tools.. very nice and cool.
and this is when i hit the maximize button and unleash hell, red circles are where the title bar and tools were, not so nice and cool..
i noticed none of the others gave pictures, so i gave it a go..
please help, there are no words to describe how annoying it is.
thank very much in advance.

If you want the Photoshop main window components to remain visible, either right-click on the image with the Zoom Tool selected and choose "Fit on Screen" (which really fits it inside the Photoshop workspace), or use Tabbed View.
Pressing Control-0 (control zero) is a shortcut for Fit to Screen.
I have no idea why Adobe changed the behavior. Perhaps people reported that it was annoying to have the maximize window button not actually maximize the document window to fill the screen, which is really what it's supposed to do.
-Noel

I have LR5 on a mac book pro with a external hard drive with LR5 images. my problem is my external hard corrupted reformatedand have to this is expensive and i would to start over in LR5

i have LR5 on a mac book pro with a WD external hard drive with my with my LR5 images . my problem is my external drive is corrupted .i was told by apple that my macshow the hard drive is there but it is not moumting and have to be reformat. i have to use recovery data to save my images on my external before i can refomat.iam willing to lose my images on my extenal hard drive but i would like to know can i erase my LR5 images and start over or delete LR5 and download it again

Simply start a new catalog:
File >> New Catalog
Choose a new name and save.
When the empty catalog launches you are ready to start over.

Computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

Which computer? Which Windows?
What are you trying to do?
-Jerry

Error: BG: printfile failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll

(12:58:18 PM) Number of processors: 4
(12:58:18 PM) Icon DLL loaded.
(12:58:18 PM)
(12:58:18 PM) Network Communication via SAP-NiLib
(12:58:18 PM) Hostname: WLRERW092
(12:58:18 PM) IP Address: 33405096.2097184.8388736.1616984
(12:58:18 PM)
(12:58:18 PM) SAPLPD Version 6.28 for Windows/NT (OPT) is listening
(12:58:18 PM) OS-Info: version = 6.1, build = 0/7601, text = Service Pack 1
(12:58:18 PM) Copyright © 1992-2001 SAP AG
(12:58:18 PM)
(12:58:29 PM)
(12:58:29 PM) Receive job for printer \\192.168.207.56\ULR_ZM400_HFW05 (Berkeley LPD protocol / RFC1179)
(12:58:29 PM) send_status called
(12:58:29 PM) send_status called
(12:58:31 PM) send_status called
(12:58:31 PM) send_status called
(12:58:32 PM) send_status called
(12:58:33 PM) Job 000NJJ3Z.WBP for user LR70343 queued.
(12:58:33 PM) Job 000NJJ3Z.WBP (raw) started on printer \\192.168.207.56\ULR_ZM400_HFW05
(12:58:46 PM) Error: The printer \\192.168.207.56\ULR_ZM400_HFW05 is unknown to Windows Print Manager.
(12:58:46 PM) The following printers are currently defined:
(12:58:46 PM) Printer = SEND TO ONENOTE 2010
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = PDF COMPLETE
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = MICROSOFT XPS DOCUMENT WRITER
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = HP EPRINT
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = FAX
(12:58:46 PM) Printer = ADOBE PDF
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = \\192.168.207.21\SHARP MX-4111N PCL6
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:47 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:47 PM) Printer = \\192.168.208.21\SHARP MX-4111N WELSPUN 2
(12:58:47 PM) Warning: Printer name contains spaces.
(12:58:47 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:47 PM) Printer = \\192.168.207.21\ULR_ZM400_HFW05
(12:58:47 PM) Printer = \\192.168.207.21\ULR_ZM400_HFW06
(12:58:47 PM) Cannot do OpenPrinter \\192.168.207.56\ULR_ZM400_HFW05. Text = The operation completed successfully.(12:58:47 PM) Error: BG: printfile failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll
please help
Regards
selvakumar

Apparently our Sandbox system didn't have a Spool server configured. That's why the error. It works perfectly in other systems.
The output device's Host Printer must be defined on the spool server for saplpd to recognize. Otherwise you see an error.

SSRS indicator image display problem!!

Hello ALL;
I am having problem with displaying indicator image in DEV report manager. but same rdl works in QA environment. Both server has SP1 installed. Any Idea? Appreciate for your help. Thanks,

Hi Techchi,
Based on the limited information, I cannot figure it out for this issue. As per my understanding, I think this issue can be caused by the browser that run the report manager. If you use IE explorer to render the report, I suggest that you can try to run
it in compatibility mode. If you are using another browser, I recommend that you should use IE explorer to render the report to check the issue again.
If this issue still exists, in order to solve the problem more efficiently, I need to clarify some information.
Are all reports with indicator image cannot render well in DEV report manager? Or just this one report?
What is the phenomenon about the indicator image display problem? Could you please post a screenshot about this?
It is benefit for us to do further analysis. Thank you for your understanding.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Opening Image Window defaults

When I open images in photoshop(windows, not tabs), why do the image windows open far left? Each time I edit I have to drag to center and enlarge. Is there any way to change defaults to have images open centered and full screen?

I use the very same script. In Photoshop Preferences > Interface I have "open in Tabbed mode" checked. There tall images center against a dark background
If I have my documents open as separate windows, as when I uncheck the Application Frame on my Photoshop Mac, then the image window opens to the left.
So it's "Tabbed mode" and Window menu > Application Frame checked on.
Of course that does not fix your dilemma if you must use Document Windows instead of Tabs. So I will link you to two scripting venues for a possible solution.
Gene
Photoshop Scripting
ps-scripts.com • Index page

Having a image alignment problem using clearbox

Hi,
I'm having an image alignment problem. I cannot figure it out. I'm using the clearbox - lightbox dreamweaver widget. Using Dreamweaver CS6.
Actual page located here. Any help would be appreciated.
http://dirtysouthink.com/gallery/dustin2.html

This has very little to do with Dreamweaver. DW is merely a tool to assist you in building a web site. It is purely a matter of styling (CSS).
When I look at the structure, I see
BODY-CONTENT (width: 490px)
     GALLERY (width: 452px)
          CONTAINER (width: 500px)
               ITEM (width: 150px)
From this I can deduce that:
GALLERY will fit inside BODY-CONTENT
CONTAINER will NOT fit inside GALLERY or BODY-CONTENT
ITEM will fit three times into CONTAINER
To start with, I would reduce the size of the CONTAINER so that it fits inside of its parent. Then I would adjust the width of the ITEM so that only two of them fit inside of the CONTAINER.

CS 6 Image Windows Don't Stay Where I Put Them

I installed CS 6 yesterday. My system runs 64 bit Win 7. In Preferences > Interface, as I did in CS 5, I unchecked both Open Documents as Tabs and Enable Floating Document Window. However, unlike CS 5, in CS 6 images 'insist' on positioning themselves in the upper left corner of CS 6 and will cover both the options bar and the tool bar. For example, this will happen after opening an image if I try to move it or if I enlarge the image window (CTRL-0). If I open two images and try to move one so I can see both at the same time, the one I try to move will not stay where I put it but instead will reposition itself to the upper left, and cover the options bar and menu bar.
As you might image, this makes working in CS 6 difficult and inconvenient. I assume this is a bug, and wonder if there are any workarounds or other solutions. To this point, I have not yet uninstalled and re-installed CS 6. Any suggestions would be appreciated.
Best regards,
David

Noel Carboni wrote:
Can we assume you hate the Auto-Hide feature even worse?
Hi,
The answer to your question is 'probably'. I like things to stay put, ideally where I want them. So far my feeling is that having the task bar on the bottom is the lesser of the two 'evils'. But your note reminds me to give auto-hide another try. Thanks.
Best,
David

Image Window Problem

Similar Messages

Maybe you are looking for