Image zooms in and bounces. How do I fade out?

Getting my feet wet and trying a routine event. Have an image
zooming in and bouncing. That works. What I want to do is fade the
image out after it has stopped bouncing. How do I fade it out? Here
is what I have:

I came up with the below bit of code. But now the image fades
and then re-appears

Similar Messages

How do I fade out audio in Premiere Elements 13?

HOW DO I FADE OUT AUDIO IN PREMIERE ELEMENTS 13?

ATR
Thanks for answering,
im moving slowely forward in speeding up making presentations by using the new discovered smart tricks or functions.
So you understand my level of expertise:
This step by step production methode im using now give's me controle without the (full) knowledge of all the (smart)functions in this program.and slowely learning the way arround.
starting a project: a mix of photo's and avi's, starting with manual time line filling with the selected files then the timesaving "Standard crosover on all selected".
second: placing a header with the titel at the front and a ending a the end. (cut al the wrong or bad pieces and extend some photo viewingtime if needed.)
And then adding subtitels/tekst and use some other crosovers to highlight the change of subject or stills to movie.
And at last: placing the background music on "soundtrack": after some fiddeling around ive choose to cut the musictrack between the avi's instead of let the music play all the time and adjust the volume down to zero when a avi is playing.
this have two advantages:
1) the songs can be streched by by cut and jumping to the end of the avi soundtrack. (no loss of music through fading out and still let it play so need less musicsongs.)
2) And the rightclick fade function with the standaard fadingtime => "fade out" and "fade in" is easly to use because of the end track avi and begin track music timeline. (And if needed lowering the fading slope/ extend the fading time by moving the "points" on the audio line)
But; its a lot of work and after the first run through the presentation(or watching on TV) and there is a adjustment needed (fadingtime, volume-changes) you have to adjust every bit of the soundtrack. (keeping the volume "feeling" the same is the difficult part.)
I will read about the Smart Mix function and test it on a other project. see of its fits my kind of using and expertise. (every automatic (smart) function needs understanding of its purpes and limitations and there are a lot of them in premiere
What is in your opinion the most effective way of adjusting volume of audio parts across the hole project so its merged in to one audio/soundlevel?
(and offcourse in the hole way of building the presentation.)

How do i fade out a video clip?

how do i fade out a video clip?

ChiDonDada
What version of Premiere Elements are you using and on what computer operating system is it running?
In the absence of that information, I will generalize, tending toward Premiere Elements 11....
a. Right click the Expert workspace Timeline video, select Fade from the pop up menu and then the wanted Fade Audio or Video command.
b. In version 11, you could click on Applied Effects/Applied Effects Palette/Opacity Panel and the shortcut Fades there.
c. You could keyframe the Opacity property in the Applied Effects Palette/Opacity or via the video track content rubberband at the Timeline Level.
Please supply more information for fading in out your video and audio track contents.
Thanks.
ATR
Add On...If you have Premiere Elements 11, you may be interested in the information on these Fades found in one of my blog posts
http://www.atr935.blogspot.com/2013/06/pe11-timeline-fade-out-shortcuts-and.html

When i do title animation the last letters or words of the script always pop up before the rest fades in and stays after the rest fades out...help!

when i do title animation the last letters or words of the script always pop up before the rest fades in and stays after the rest fades out...help!
I tried changing the font and then the placement of the title but it always comes back!

Thank you. I figured it out right before I heard from you. Running the OCR before the redaction made it work correctly.
Thank you so much for taking the time to answer my question.
Make it a great day.
BG10

Images as RAW and jpgs - how to separate?

I shoot both RAW and jpg, that way I have the RAW for detailed editing, and the jpg for quick edits to post on web, as required, or to send a quick copy to friends. I will probably stop this (shooting both) when I get used to editing RAW, but that is part of my evolution and growth in developing my skills in my digital darkroom.
When I first started with LR, I was using the Beta 2 version and simply imported my PS Elements 8 Catalog and that worked okay, because both versions of the image were imported so that I could see both of them and then pick the image I wanted for further editing. I have now upgraded to the new, full version of LR3 and have just downloaded my first set of images from a weekend of shooting - went looking for bluebirds and only found one nesting box with an active pair in it. I will go back for more in a day or so - more images that is. It is strange how the population of nesting bluebirds in my part of the Western Prairies has declined significantly in the past five years, but that is a whole, different story, Anyway to proceed...I downloaded the images from this afternoon's shoot and found that the RAW image (Canon - CR2) and the jpeg show as one image with a title that says IMG_xxxxx.CR2+jpg. I would like to be able to break the two different images out, or at least get at each one separately for editing purposes. For the life of me, I cannot figure this one out. I am still waiting for Kelby's LR3 book that I pre-ordered...maybe this week. Not sure if that will tell me how to do this, assuming I can. If I can't do this, then I will have to import into Elements 8 and then re-import that file into LR3 - a process I would rather not have to do.
Any insight that anyone can provide on how to do this (I assume it can be done) will be greatly appreciated. Maybe it is something as simple as a "switch" on an import preset, or setting up a "custom" import preset (if there is such a thing). Thanks in advance.
Regards,
WesternGuy

Susan, thanks for the insight. I think I will follow your lead and delete the images from my catalog and re-import them. Hopefully I can find the options that you have noted. It would be nice, though, if there was a way to break them apart after loading, but at least I don't have too many to redo.
Regards,
WesternGuy

Text shifts slightly at end of fade-in and at the start of fade-out

Hi, I have created text with a crossfade at both ends. I find that my text jitters a bit at the point where the fade-in ends AND at the point where the fade-out begins. How can I get rid of that slight shift?
Thanks, Bob

Hi Tom, I am working in standard DV, and viewing the jittery text straight off the timeline. By your question, I am starting to assume that this problem may disappear when this project is eventually burned on a disk and viewed on a TV?
By the way, thanks for all your generous help. I hope you realize that you are saving a lot of people from going crazy. I wish I knew your address, and could send you a gift.
Bob

Simple question - How do I fade out a project?

There's got to be an easy answer to this. I have created a project in Logic 9 and would like to fade it out at the end. This is really easy in GarageBand (Track > Fade Out) but I can't see how to do it in Logic. Any tips?

Press A on your computer keyboard to show the automation.
You can make changes in volume in a similar way to the way that you do it in Garageband, so try it with different tracks first. You can fade the whole thing out by automating the main output channel, but it needs to be in the Arrange window for you to be able to do that, yeah ?
If you open the mixer you can select the main out and choose an automation mode from the button on the channel strip - that automatically put it into the Arrange window, there are a few other ways of doing that that are worth knowing.

How do I fade out a soundtrack to the entire presentation?

Hey - my presentation has a track to accompany it which is longer than the visual so I would like to fade it out at the end. Any ideas how I can do this?? Thanks so much!

Keynote is unable to do this. Use video or sound editing software to fade out and cut the sound track.
iMovie and audacity are examples of software you can use, or Google for others.

Just got a new 2.7 and wondered how to use optical out from g5

i got 2408 motu and wanted to use apples optical ins and outs together 2408 i tried have not even figured out how to get the optical to work bare with me im switching over from protools .So explain the setup on how to use multiple sound cards in logic and if its posible to use apples optical ins and outs thank you

Ask the Verizon store to exchange your iPhone for a different iPhone 4.
UPDATE - Sure, try ckuan's solution first. Then use mine if that fails.
Message was edited by: sberman

How Do I Fade Out In The Middle Of A Song?

I cant find out how to do it on certain parts in the middle of a song I am mixing. Can anyone help?

You may want to head over to http://labs.adobe.com/ and download the public beta release of Soundbooth CS4. It offers multitrack, volume keyframing, and more tools that are better suited for mixing music than the tools offered in Soundbooth CS3.
Durin

Images in Portrait and landscape

I am trying aperture 3 on trial, I moved some images across from iphoto and now I have every image in portrait and landscape, how can I change this?

Mine are currently working when set to "Inline (moves with text)" and each takes a little adjustment. This is not satisfactory for me either. - Fabe

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

Fade in and Fade out components from 3d modell onClick self-made buttons

Hi,
in Acrobat Pro you can place your own 3D-model into the pdf. Than you can fade in and fade out components of your 3d-model on a acrobat-menü (see images) in the pdf-reader. Now I want to build a pdf with this functionality, but the tricky thing is, that I want to fade in and out the components from the 3d-model not on the menu, but on self-made buttons.
But how to say the buttons, that they should fade in or fade out a component from the 3d model, like it the menu from acrobat does?
Thank you for reply.
Maybe this images will help you to understand my question:

Thank you very much for your answer. But I think what you mean, is to make a full object visible=false. But what I want to make is to fade out a subordinate level.
So for example this is my hierarchy:
layer one
-sub-layer one
-sub-layer two
*sub-sub-layer one
layer two
-sub-layer one
And now I want to fade out the sub-sub-layer one. What is the code for that?
Thank you very much again!

How do I white out portions of a video?

How do I white out portions of a video? Specifically, if I have a image of a face how can I white-out the eyes and nose, How do I white out portions of a video? Specifically, if I have a image of a face how can I white-out the eyes and nose so that the face becomes all white except for the mouth?
Thank you

Thank you both so much, I am sorry I have been MIA but right after I posted that message I lost power and have been unable to access the internet.
Christine- thank you very much for the link and as I have been searching for an answer I have read a lot about motion and I know I am going to sound completely dumb saying this but...what exactly is motion?
Michael- I am trying to create stimuli for an experiment and well the control condition is a video recording of a man from the neck up speaking in front of a blue background and for the control we want to "white out" all of the facial features except for the mouth so that all you see is the blue background, an outline of the head that is all white except for the mouth.
This is my first research project and I am really hoping to do well and truly appreciate the help.
Molly

Fade Out Image

I'm using thumbnails to display buttons for my portfolio in
flash, and I have the code to fade in the bigger images:
But how do I fade Out every time a new button is clicked on?

pziecina wrote:
Hi
Try this one - http://www.linein.org/blog/2008/01/10/roate-image-using-jquery-with-plugin/.
PZ
www.pziecina.com
That'll do for me.
Ta very much.
Osgood.

Image zooms in and bounces. How do I fade out?

Similar Messages

Maybe you are looking for