Imagecopy (Disk clone) between two Lenovo T440p

Hi - My T440p having lost of problems, and will be replace by a new, same model. I have installed lots of programs, some of them licensed in a way that I need to unlock and transfer licences, manually by personal phonecalls, some needing lots of updates, all together making it timeconsuming to recreate to current setting from old to new PC.
Question; Is there a recommended way to make an Imagecopy or do a disk clone, giving me a new PC set up exactly as the old one?
Best regards, Jan-Petter.

It should work okay. You might have to reactivate Windows though.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

Clone between two images in Aperture

Is it possible to close between two images in Aperture? I have a photo from a friend's wedding where I have two photos; the first is great - good light, everyone looking at the camera, etc except one person in the front row has closed eyes. In the second photos her eyes are open. The position of her head, etc is the same so I think it would look OK.
Is it possible to cut her eyes from photo 2 and paste in photo 1?
Thanks in advance for any advice.
regards

You'll have to use a pixel editor as William said, like Photoshop, and then send the images to further edition via aperture by defining your external editor in the preferences and then right click (ctrl+click) and 'edit with external editor'

What makes my default project location to bounce between two places in FCP X?

I wonder what makes my default project location to bounce between two places in FCP X?The project I am working on is on my local disks which are backed up (daily) to external eSATA enclosure. If I run FCP X just by clicking its icon (not a project file) in most cases it opens FCP X with a project but in event library there is not files linked.Sometimes it expands the project’s library located on backup station.
To make active the the local version (get it expanded and access all the files related to the project, I have to: close FCP X, launch FCP X by click on a project or a library file, close FCP X again and then I can get the project and its content displayed correctly just by clicking on a FCP X icon.
After backup is made (I use Carbon Copy Cloner to backup this volume) if I relaunch my FCP X, I have to start the procedure mentioned above all over again. What I am doing wrong?

Munas, what you describes sounds a lot like the problem I've been experiencing.
I have two matching external drives mounted. Drive 1 is the primary, Drive 2 is an identical back-up. Both identically formatted.
FCPX randomly opens drive 2 when I start the program, even when I click on a sidebar link to a project on Drive 1. The clips are often, nonsensically, shown as off-line.
I really don’t care if FCPX recognizes drive 2, in fact I wish it wouldn’t. I don’t, obviously, want to unmount Drive 2 just to use FCPX.
My workaround for this was to rename the Final Cut Events and Final Cut Project folders “FCE” and “FCP” respectively on Drive 2, and configure my back up utility accordingly.
Now, although Drive 2 is listed in the Events and Project Libraries on start up, FCPX doesn’t recognize any events or projects on it, and it sits there as an icon that can’t be expanded. I can live with this until a fix comes, in fact I rather like it.
Cheers

How can I interact between two different frames in the same indesign template as well as from one template to another.

I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.

There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP

Sharing One iPhoto Database Between Two Accounts

Below is a reply to a question I have regarding sharing photos with my wife on the same Mac. I would like for us both to able to upload, edit, and use photos from the same iPhoto database. Do all of the buggaboos listed in the reply below still apply?
Thanks,
Jim
Re: Sharing Photo's on the same iMac between two user accounts
Posted: Jun 2, 2009 8:27 AM in response to: Thomas Harrigan Solved
Tom
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Regards
TD

No. All the folks who post here are just Users, like you.
Regards
TD

How do I set Time Machine to alternate between two attached external drives (so that if one fails I will have a separate backup to use)?

Hi Everyone.
Thanks in advance for your help.
Right off the bat let me say I am using Mavericks 10.9.1 on a 2011 Macbook Pro and using all Lacie external hard drives.
I am trying to get Time Machine to alternate between two attached external hard drives, trying to be safe in case one of the backup drives itself fails.
I have both drives set in Time Machine.
From what I gather Time Machine should by default alternate between drives when backing up (I would assume it does one big initial backup on each then subsequent backups are just changes).
But this is not how it seems to be working and I cannot find a straight answer despite much Googling and Foruming
Unfortunately it seems to only be backing up to "External Hard Drive 1".
There have been 4 backups since I set it up, all on "External Hard Drive 1", even though "External Hard Drive 2" is also attached and set in Time Machine.
I manually clicked "Back Up Now" and it started to work on "External Hard Drive 2" (like I want it to) for a minute but it appears to have stopped and gone back to backing up to "External Hard Drive 1".
Am I missing something? Does Time Machine only move on to another disk when the first one runs out of space? Do I have to turn one off in order to force it to back up to the other drive (that would be less convenient of course)?
I am hoping that I am missing something and that it will just alternate between the two. Otherwise it is not the most comforting and thorough backup system as I had hoped when I purchased the additional external hard drive.
I have a 1TB drive and a 500gig partition on another drive, both dedicated to backups (my Macbook HD is 475gig). It will take awhile for each to fill up and who knows what could happen during that time. Having Time Machine alternate between hard drives would be a nice small bit of security if the worst happened.
I realize that there are tons of other options for backing up but I just want to use Time Machine if I can.
Again thank you for your help!

You cannot use Time Machine in that way. I'm not sure where you heard that Time Machine alternates between drives automatically. What you can do is create a mirrored RAID array for the backup. This automatically duplicates whatever is on one drive onto the other drive.
Both drives must be the same size, and prefereably, exactly the same make and model. RAIDs can be configured using OS X's Disk Utility.
RAID Basics
For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
RAID Tutorial;
RAID Array and Server:
Hardware and Service Comparison.
Hardware or Software RAID?
RAID Hardware Vs RAID Software - What is your best option?
RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
Pros and cons
Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?

How do i share iPhoto library between two user accounts

I need to share my iphoto pictures between two accounts on the same computer

For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

Is it possible to set up a backup between two external drives

Is it possible to set up a backup between two external drives?
i use time machine to back up my imac onto an external 2T.
i also have two external 3T drives. i am looking for redundancy of data, tried software RAID and it failed. i also see some limitations with RAID that a backup would avoid.
thanks for sharing your expertise.
be well,
tony

so thanks to all of you, particularly rkaufmann87 i have decided to stop the plan of setting up a software RAID set. instead i have downloaded ccc and am in the process of setting up the secone 3t external drive as a clone. i will use time machine to back up the internal hard drive only and if possible see if i can clone that as well onto one of the 3t's.
this gives me the peace of mind i sounght and avoids the problem of total corruption that exists with the raid solution i was exploring.
thank you all for making this an enjoyable and informative experience. what a powerful community.
be well
tony

How do I share iPhoto libraries between two Macs?

Hi! I would ideally like to have one iPhoto library to share between two different Mac laptops. Is there some way I can set it up so that the same library can be shared, edited, and updated? Or if not, is there a way I can see the other Mac's iPhoto library? Both computers share the same Wifi and both using Mountain Lion OS (but I can upgrade if that would help).
Thanks!

The only way to do what you want is to put the Library on an external disk formatted Mac OS Extended (Journaled). Then connect - a wired usb/firewire/thunderbird connection - the drive to each machine as required.
What you're describing is a media server. They start at the $200 mark.

Transferring applications between two Macs in different locations?

What is the easiest way to copy an application between two Macs? I originally installed a graphics program on my old eMac G4, then used the Migration Assistant to transfer it to my new iMac G5. I then reinitialized the old G4 and didn't bother to reinstall the graphics program, but now I would like to have it on this machine as well and I can't find the original install disk for this application. Complicating matters is that the machines are now in two different places, one at home, one at work. This is an expensive program, so I would hate to have to buy another copy and am kicking myself for not being able to find it. Thanks for any help...

If you can't find the original install disk for the program, contact the program vendor. Some may offer you a replacement disk for a nominal fee. And be sure to follow whatever license agreement you have for the purchase of that software. If it can't be installed at both home and at work, and you can't afford another copy of that program, you may want to seek a cheaper alternative.

Drag and Drop images between two listviews

I need a help for listview drag n drop opretion on winform. where listview1 hold the images and i want to drag images from listview1 to listview2
and then when i click any button i want all paths of Images which is in the listview2. and also i want to set the image size on listview2. Please help me.

Hi Ajay Kumar,
According to your description, you'd like to drag and drop listviewitems between two listviews.
Here is my example for dropping items between listviews. You could add one imageList control to your form.
public Form1()
InitializeComponent();
this.listView2.AllowDrop = true;
this.listView1.AllowDrop = true;
this.listView2.View = System.Windows.Forms.View.LargeIcon;
this.listView2.DragDrop += new System.Windows.Forms.DragEventHandler(this.OnDragDrop);
this.listView2.DragEnter += new System.Windows.Forms.DragEventHandler(this.OnDragEnter);
this.listView1.ItemDrag += new System.Windows.Forms.ItemDragEventHandler(this.OnItemDrag);
private void Form1_Load(object sender, EventArgs e)
DirectoryInfo dir = new DirectoryInfo(@"D:\Material\Emoticons");
foreach (FileInfo file in dir.GetFiles())
try
this.imageList1.Images.Add(Image.FromFile(file.FullName));
catch
Console.WriteLine("This is not an image file");
this.listView1.View = View.LargeIcon;
this.imageList1.ImageSize = new Size(32, 32);
this.listView1.LargeImageList = this.imageList1;
this.listView2.LargeImageList = this.imageList1;
//or
//this.listView1.View = View.SmallIcon;
//this.listView1.SmallImageList = this.imageList1;
for (int j = 0; j < this.imageList1.Images.Count; j++)
ListViewItem item = new ListViewItem();
item.ImageIndex = j;
this.listView1.Items.Add(item);
private void OnItemDrag(object sender, System.Windows.Forms.ItemDragEventArgs e)
DoDragDrop(e.Item, DragDropEffects.Move);
private void OnDragEnter(object sender,
System.Windows.Forms.DragEventArgs e)
if (!e.Data.GetDataPresent(typeof(ListViewItem)))
e.Effect = DragDropEffects.None;
return;
var items = (ListViewItem)e.Data.GetData(typeof(ListViewItem));
if (items == null)
e.Effect = DragDropEffects.None;
else
e.Effect = DragDropEffects.Move;
private void OnDragDrop(object sender, System.Windows.Forms.DragEventArgs e)
ListViewItem items = (ListViewItem)e.Data.GetData(typeof(ListViewItem));
if (items != null)
this.listView2.Items.Add((ListViewItem)items.Clone());
Results:
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Performance between two partitionned tables with different structure

Hi,
I would like if there is a difference between two partitionned tables with different structure in term of performance (access, query, insertions, updates ).
I explain myself in detail :
I have a table that stores one value every 10 minutes in a day (so we have 144 values (24*6) in the whole day), with the corresponding id.
Here is the structure :
| Table T1 |
+ id PK |
+ date PK |
+ sample1 |
+ sample2 |
+ ... |
+ sample144 |
The table is partionned on the column date, with a partionned every months. The primary key is based on the columns (id, date).
There is an additionnal index on the column (id) (is it useful ?).
I would like to know if it is better to have a table with just (id, date, value) , so for one row in the first table we'll have 144 rows in the future? table. The partition will already be on the columns (id, date) with the index associated.
What are the gains or loss in performance with this new structure ( access, DMLs , storage ) ?
I discuss with the Java developers and they say it is simpler to manage in their code.
Oracle version : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Thanks & Regards
From France
Oliver
Edited by: 998239 on 5 avr. 2013 01:59

I mean storage in tablespaces and datafiles on disk.
Can you justify please and give me concrete arguments why the two structures are equivalent ( except inserting data in T(id, date,value))
because i have to make a report.i didnt say any thing like
two structures are equivalent ( except inserting data in T(id, date,value)i said
About structure : TABLE1(id, date, value) is better than TABLE1(id, date, sample1, .... sample144)because
1) oracle has restriction for numbers of column. Ok you can have 144 columns now but for future if you must have more than 1000 columns , what will you do?
2) Restrictions on Table Compression (Table compression is not supported for tables with more than 255 columns.)
3) store same type values on diffrent columns is bad practise
http://docs.oracle.com/cd/B28359_01/server.111/b28318/schema.htm#i4383
i remember i seen Toms article about this but now i cant find it sorry ((( if i found i will post here

Authentication needed after doing trust between two different domains.

Hi There,
I have a problem when i did the trust relationship between two different domains in two different forests ,,in the trust relationship steps all working two ways trust,with external trust,stub zone created on both domains and they are validated in both sides
,,my problem is with the objects it can't be retrieved from side and it can be from the other side . For instance :
NY domain can get the users and computers of 2012DC1
but 2012DC1 can't get the users and computers of NY
Date and time are the same,i am always getting this error
The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer.
USER ACTION
If this is the first occurrence of this event for the specified computer and account, this may be a transient issue that doesn't require any action at this time. If this is a Read-Only Domain Controller and 'test.com.' is a legitimate machine account
for the computer '2012DC1' then '2012DC1' should be marked cacheable for this location if appropriate or otherwise ensure connectivity to a domain controller capable of servicing the request (for example a writable domain controller). Otherwise,
the following steps may be taken to resolve this problem:
If 'test.com.' is a legitimate machine account for the computer '2012DC1', then '2012DC1' should be rejoined to the domain.
If 'test.com.' is a legitimate interdomain trust account, then the trust should be recreated.
Otherwise, assuming that 'test.com.' is not a legitimate account, the following action should be taken on '2012DC1':
If '2012DC1' is a Domain Controller, then the trust associated with 'test.com.' should be deleted.
If '2012DC1' is not a Domain Controller, it should be disjoined from the domain.
Can you please help me in this error.
Thank You in advance.

Hello,
"The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer. "
This belongs to the machine 2012Dc1 in test.com and not to the other domain from your trust. Seems for me that you mix the trust with the problems of the machine 2012DC1 in test.com.
In this error message 2012DC1 has lost the trust to its OWN domain and therefore you have to find the reason. How exactly was this machine installed?
Or was there a restore on that machine from not supported type of backup like image/clone/snapshot?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Is It Safe To Use Target Disk Mode Between My Intel iMac And A G4 eMac ?

I want to use DiskWarrior 4 to rebuild my Intel-iMac's directories but a suitable startup CD has not yet been produced.
So I intend to put DW on my old G4 eMac (OSX 10.4.10) and use Target Disk Mode between the two.
As they have different processors and OS will it be possible and more importantly will it be safe to do so?
Ian.

I received the very latest CD revision from Alsoft for DiskWarrior, Rev. 42. This latest version is STILL not able to boot the newest MacBook Pros. I tried, and eventually my MacBook just restarts to its internal HDD.
So I tried to run DiskWarrior 4.1 on a PowerMac Dual G4 which I had the Macbook Pro connected via target disk mode. NOTE: Both Macs are running the latest Mac OS X 10.5.4.
About half way through the "rebuilding directory" process, the G4 had a kernel panic and the black screen came up telling me to force shutdown my Mac. I nearly soiled myself. Luckily, the freeze up happened before the vital stage when DiskWarrior is replacing the directory. So MacBook Pro luckily booted back up okay.
So, I'd say to play it safe and NOT try to run DiskWarrior 4.1 from an older pre-Intel Mac to rebuild an Intel Mac's directory via target disk mode.
Currently, I think my only option I have to rebuild my Macbook Pro's directory is to install Mac OS X on an external HDD, install DiskWarrior and run it from there.

Transition between two movies

I would like to add a transition between two movies in the
following AS3 script that otherwise works fine. Any help is
appreciated:
package {
import flash.display.MovieClip;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.Event;
import fl.controls.listClasses.CellRenderer;
import fl.controls.ScrollBarDirection;
import fl.video.VideoEvent;
public class VideoPlaylistSeq extends MovieClip {
private var xmlLoader:URLLoader;
public function VideoPlaylistSeq():void {
// Load the playlist file, then initialize the media player.
xmlLoader = new URLLoader();
xmlLoader.addEventListener(Event.COMPLETE, initMediaPlayer);
xmlLoader.load(new URLRequest("playlist.xml"));
// Format the tileList, specify its cellRenderer class.
//Width and length of bigger thumb box
tileList.setSize(300, 515);
//Width for text box where thumb text is placed
tileList.columnWidth = 230;
tileList.rowHeight = 60;
tileList.direction = ScrollBarDirection.VERTICAL;
tileList.setStyle("cellRenderer", Thumb);
public function initMediaPlayer(event:Event):void {
var myXML:XML = new XML(xmlLoader.data);
var item:XML;
for each(item in myXML.vid) { // populate playlist.
// Get thumbnail value and assign to cellrenderer.
var thumb:String;
if(item.hasOwnProperty("@thumb")>0) thumb = item.@thumb;
// Send data to tileList.
tileList.addItem({
label:item.attribute("desc1").toXMLString(),
label:item.attribute("desc2").toXMLString(),
data:item.attribute("src").toXMLString(),
source:thumb});;
// listen for complete event; play next video
function vidComplete(eventObject:VideoEvent):void {
if(tileList.selectedIndex < tileList.length-1){
tileList.selectedIndex = tileList.selectedIndex+1;
} else {
tileList.selectedIndex=0;
tileList.scrollToIndex(tileList.selectedIndex);
myVid.play(tileList.selectedItem.data);
// Select the first video.
tileList.selectedIndex = 0;
// Listen for item selection.
tileList.addEventListener(Event.CHANGE, listListener);
// And automatically load it into myVid.
myVid.source = tileList.selectedItem.data;
// Pause video until selected or played.
//myVid.pause();
// Listen for end of current video, then play the next
myVid.addEventListener(VideoEvent.COMPLETE, vidComplete);
// Detect when new video is selected, and play it
function listListener(event:Event):void {
myVid.play(event.target.selectedItem.data);
// listen for complete event; play next video
function vidComplete(eventObject:VideoEvent):void {
if(tileList.selectedIndex < tileList.length-1){
tileList.selectedIndex = tileList.selectedIndex+1;
tileList.scrollToIndex(tileList.selectedIndex);
myVid.play(tileList.selectedItem.data);
}

Let us know.
There are bluray menu limitations; they don't come up often, and I do not understand some of them. For example, there is a limit in Encore of 32 buttons per menu. (That does not appear to be a problem for you.) There is a limit to the size of all interactive graphics in each title (which includes a menu as a title). I don't understand that one.
I would do a test project, starting over, and building a less complex project that still has the essential features.
I have found Total Media Theater 5 to perform very much like a bluray player. But, yes, ultimately you've got to burn to a disk and test it on a bluray player.

Imagecopy (Disk clone) between two Lenovo T440p

Similar Messages

Maybe you are looking for