Images and image field problem

Hi
I would like the user to be able to upload an image that will be scaled proportionally to the size of the field pre determined.
I understand that options of image field: "scale image proportionally" is meant for this exactly.
For some reason, this works with images but not with image fields.
please see a printscreen I have made of the problem: same field size and same image uploaded
thanks

In Lightroom, there is no specific location where the photos should go. You can put them wherever you want, based upon your storage needs and hard drive setup.
So, with regards to your specific question, yes you can put the photos in the same folder as where the .lrcat is located, I can't see any harm, but I also don't think you need to do the work to make that happen. You can pretty much leave your photos where they are (which is easier and less time consuming) than moving them to the .lrcat folder, and easier and less time consuming than moving them at all.
In fact, I strongly suggest you change your thought processes from "Where do I put my photos" to "How can I organize my photos". Now that you are a Lightroom user, you organize your photos from within Lightroom, not by moving them here to there, but by adding keywords and other metadata. Organizing, now that you are LR user, is not folders ... it is metadata. Searching, now that you are a LR user, is not done in your operating system and in folders, it is done in LR by searching for keywords and other metadata.

Similar Messages

  • How to populate image and text field in SQL Server

    I want to populate a table, i.e insert images in a table in SQL Server. I am using Java(JSP/Servlet). Can any one suggest me how to populate the image and text fields in SQL Server...of course, using Java. If possible, could you please give me a piece of code?
    Regards -
    Samit

    Hi,
    Please check the following link for information on inserting images in to sql server database.
    http://www.databasejournal.com/features/mssql/article.php/1475641
    Cheers,
    vidyut

  • Images and image maps do not respond to events on Safari

    Hello everyone,
    We have been experiencing issues with events not responding to images associated with image maps, on Safari browser. After the DOM is loaded with new image and corresponding image maps, events such as mouseover and click observing this divs do not respond or get triggered. DOM seems to be updated correctly but behaves differently (and it works correctly in all other browsers except Safari).
    This behaviour is only noticed in Safari browser running both on Windows and Mac. (Tested on Safari Version 3.1.1 on running on Windows and Mac)
    For you all to have a closer look at this issue, I have created a sample that has this problem, similar to one we experienced during one of our recent projects. Please click on the link below to get to the sample (I recommend you to try this either in Firefox or IE before you do on Safari)
    http://www.hivegroup.com/safari/test.html
    (In the above sample,
    - the javascript code initializes the DOM with image and image map
    - assigns two event listeners to the div containing this image and image map
    - when mouse pointer brought over the image, it shows the area id in the 'mobox' div
    - when clicked, DOM is updated with a new image and new corresponding image map, assigns new event listeners and should continue with the same kinda behaviour it did for the first image (but doesn't in Safari browser))
    All inputs on this issue are welcome and greatly appreciated.
    Thanking you in advance.
    Regards,
    Shashi.

    Let me explain what the pink area is. Like the first image that contains two white boxes, the pink area (as you call it) is a new image (containing four pink areas or boxes having an area id denoted to each) that imgDiv occupies after the 'click' event occurs.
    Yep, i gathered that from seeing it work on firefox...
    The point that I'm trying to make here is, there shouldn't be any difference in behaviour when imgDiv holds first image (two white boxes) or the second image (four pink boxes) that you get after we click on image or the third image (containing 6 boxes, multiple colors) which you won't be able to reach in safari browser.
    well... I can reach them, but only via the blue space.
    . We'll notice change in the red box displaying target id only when we mouse over a new area that is not currently being displayed in the red box.
    except in webkit for safari 2, where thered bpx content sticks at whatever it was when the first image was clicked, unless mouse is moved to the 'all area', and then it sticks on imgdiv.
    I completely understand what you see in safari 2. But are you saying there's some error in my script ? If so could you please point out and justify.
    I dunno Shashi, just pointing out the errors that Safari 2 reports when I view your test page, in the hope it might help. I know little of javascript

  • Lightroom 5 is not showing previous sucessfuly imported images and images are not identified as missing, there are no images shown in the library, how do  I reconnect missing images?

    lightroom 5 is not showing previous successfully imported images and images are not identified as missing, there are no images shown in the library, how do  I reconnect missing images?

    If the images are not identified as missing ... then you can't reconnect them
    But I'm not really sure what is happening, as I don't understand your description of the problem, could you show us a screen capture? Or describe what appears on your screen in much more detail...

  • Images (and image folders) in the same folder as Lightroom Catalog?

    I'm just switching over from Aperture 3 to Lightroom 4.  I'm wondering if its ok (or smart) to keep the images (and image subfolders) in the same folder that the Lightroom.lrcat and Previews files are kept in.  I'm trying to better organize my Pictures folder so that there are a whole bunch of separate sub-folders.  Thoughts?

    In Lightroom, there is no specific location where the photos should go. You can put them wherever you want, based upon your storage needs and hard drive setup.
    So, with regards to your specific question, yes you can put the photos in the same folder as where the .lrcat is located, I can't see any harm, but I also don't think you need to do the work to make that happen. You can pretty much leave your photos where they are (which is easier and less time consuming) than moving them to the .lrcat folder, and easier and less time consuming than moving them at all.
    In fact, I strongly suggest you change your thought processes from "Where do I put my photos" to "How can I organize my photos". Now that you are a Lightroom user, you organize your photos from within Lightroom, not by moving them here to there, but by adding keywords and other metadata. Organizing, now that you are LR user, is not folders ... it is metadata. Searching, now that you are a LR user, is not done in your operating system and in folders, it is done in LR by searching for keywords and other metadata.

  • When i Place a PSD in Indesign it comes in at 200+% while the image frame is considerably smaller. How do i place so that the image and image frame match?

    When i Place a PSD in Indesign it comes in at 200+% while the image frame is considerably smaller. How do i place so that the image and image frame match?

    Peter,
    The screenshots tell you everything.
    The second one tells you how the image frame is automatically set up after a one-click place. It's the blue stroked rectangle with the eight control points at each corner and mid-way along the line. This image frame is generated at a proportionally correct height and width for the image it contains.
    Now, if you look at the third screenshot (click on it to see it at a larger size), you will see I've used the direct selection tool (white arrow) to click on the image within the image frame. This CLEARLY shows the image (within the image frame) is substantially larger than the frame generated to contain it. This is indicated by the yellow stroked rectangle with the eight control points at each corner and mid-way along the line.
    Notice that the blue and yellow rectangles are vastly different sizes.
    In InDesign CS5.5, when i clicked to place the image, the image would fit perfectly within its image frame. the blue and yellow rectangles would match.
    I had no need to go click on the proportional fill and centre buttons like i need to do now in CC.
    I have a keyboard shortcut to place. I can't do File > Place for the amount of images i need to place.
    So to reiterate: How do i place an image so that the image and image frame match?

  • Thumbnail images, bigger images and some text PROBLEM

    Unclear title, with an unclear problem.
    What I'm wanting to do is, when I click on a thumbnail image, I want the content in the DIV on the right to change accordingly to display the image and information relating to the thumbnail you have just clicked. I'm using Dreamweaver CS5 on MAC:
    - I have a page split into 2 vertical columns. On the left I have 6 thumbnail images in their individual DIVs, wrapped all together in another DIV container
    - on the right of the page I have assigned a large DIV to display a big image with a description underneath of what the project was etc...
    I know you can attach a behaviour to the thumbnail to change the big image on the right, but I have a short paragraph of text below the big image too, and I don't particularly want to make the image and text one huge image. I want to keep the text, text.
    How do I do it? Is this a simple thing? or is there a lot of coding to do this with JQuery or Javascript or something? Is there something to do with Data record sets involved?
    Is there a way of doing it that when you click on the thumbnail that it can load the relevant image and text into the DIV on the right?
    Sorry if it's not clearly explained, not sure how to do it, therefore not sure if I'm describing it properly.
    As always, all help and advice very welcome.

    Hi Murray,
    Here is a screenshot of the page in question.
    - On the left are the thumbBox DIVS, (shown here, "thumbBox1")
    - On the right there is a main container, "galleryDisplay"
    - Within "galleryDisplay" there is a DIV for the large image, "galleryDisplayImage", and another DIV to display a paragraph of information on the project, "galleryDisplayInfo".
    Just to repeat, I want that when you click on the "thumbBox1", that the content of "galleryDisplayImage" and "galleryDisplayInfo" change in accordance to the thumbnail clicked.
    Murray *ACP* wrote:
    The easy way to do this is to have each click on the thumbnail change the display Property of a container (containing both the image and the caption) from "none" to "block".  In the column on the right, just line up a series of divs, each containing the desired image+caption, and use DW's Chage Property behavior on a null link surrounding the thumbnail.  For example, a thumbnail image:
    <a href="#" onClick="MM_changeProp('image-caption1','','display','block','DIV'); return false"><img src="path_to_thumb.jpg" width="165" height="50"></a>
    Each click on a thumb would also have to change the display Property of all other image-caption containers to "none".
    I don't understand what I have to do with the relevant large image and text. You say to "line up a series of divs"... I don't understand. Where do I "store" the image and text combinations for each project? I can understand how an image can be loaded into the image div, but how and from where do I load in the html text with css applied into the info div?
    Can I change the content of 2 separate divs from one click?
    Sorry for not being overly clear, but I can't get my head round this.
    Thanks for your help. I'm sure I'll get there in the end with your expertise.

  • How to show image and file field

    Hi,
    I try to bind DataTable with Sales-Rep_Data_tbl under Order database source (within Creator).
    The columns have IMAGE and RESUME.
    After binding and run, the two fields show no meaning in browser. Should I do some extra work? How do I display them?Thanks!

    Hi, Runak/Creator Team:
    Thanks a lot for quick response!
    I followed the steps there, but after run, the image still couldn't be displayed . It 's just a "X" icon there.
    I don't know the reason.
    If "Sample Application" in tutorial offers similar application to download, it would be wonderful.

  • Equium A110-276 DVD image and sound playback problems

    A couple of months ago my Equium A110-276 stopped playing DVDs correctly.
    The sound and images on the DVDs are slow, sometimes skip and are generally out of sync.
    I downloaded the latest drivers however it didnt make any difference. If i stream a video from youtube for example the picture and sound are both fine.
    Anyone think of anything I can do to fix it?!
    Thanks
    Siobhan

    Hi
    If the video stream looks ok then everything seems to be ok with the graphic card.
    I think either there is something wrong with the CD/DVD driver or with the software itself.
    I have investigated a little bit in this forum and found this thread regarding a very similar issue:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24736&messageID=92405
    Check the solution provided in this thread and reports your results.
    Best regards

  • Image and X display problem

    Hi,
    I am running a JSP file in Unix machine, the web server is apache using port 80. Servlet Engine is using port 8009.
    In my Jsp program, I want to read an image file:
    Image image = Toolkit.getDefaultToolkit().getImage(url);
    My problem is : I need to issue a "xhost +" command before I am able to display the image in my client PC's browser.
    Please tell me why xhost + is necessary? How to by-pass the xhost + command.
    If I don't type the xhost + command, I will get the following error:
    java.lang.InternalError: Can't connect to X11 window server using '10.3.10.15:0.0' as the value of the DISPLAY
    variable.
    at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
    at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:59)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:120)
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
    at sun.awt.motif.MToolkit.<clinit>(MToolkit.java:57)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:120)
    at java.awt.Toolkit$2.run(Toolkit.java:512)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:503)
    Pls help.
    Urgent. thanks

    X is inherently network-aware.
    If you want access an X-server (by e.g. launching a GUI-program), the client must be allowed to connect to the X-server.

  • Conditional image and image source in SSRS

    I have images stored in database for some of the items but not for the others. If there is no image in the database I would like to display static placeholder image embedded in the report.
    Is there a way to achieve that? The problem I experience is that there is no way to specify expression for Image Source. I tried to use expressions for Value field (when Image Source is set to Database) to specify the name for embedded image depending on
    condition but nothing I tried worked.

    If your image is embedded in a tablix then, yes, you are sourced to a single dataset. However the Lookup function pulls in "related" data from another dataset. Related is in quotes because there are ways to fool it. The syntax is:
    =Lookup(index_current_dataset, index_other_dataset,field_to_get_from_other_dataset, other_dataset_name)
    If you have a second dataset, "Second", that returns a single column, "Picture", that is your default image, you can retrieve that image using lookupset as follows:
    =Lookup(1,1,Fields!Picture.Value,"Second")
    the 1,1 is used to fool the lookup expression. Since 1 will always match 1, it will return everything in the dataset, which is the single image. Throw that into a logical check (IIf) and you get:
    =IIf(IsNothing(Fields!RelatedImage.Value), Lookup(1,1,Fields!Picture.Value,"Second"), Fields!RelatedImage.Value)
    That said Andre's approach should work also. the example may be for embedded but the principle should work for db as well since you can set a formula for visibility. Yours is in a tablix so it will require some tweaks.
    In the cell where the image will be embedded, first add a rectangle. The rectangle will allow you to add 2 images to the cell. Add your default image and set its source to whatever you like. It can even be an embedded image. Now add a second image and set
    it to your database image field. In the visibility property of each image set it show or hide based on an expression:
    default image expression: =IIf(IsNothing(Fields!Image.Value),false,true)
    db image expression: =IIf(IsNothing(Fields!Image.Value),true,false)
    You will want to set the cell width/height so it is equal or smaller than 1 image in design view. A table cell can grow bigger at runtime to accommodate more content but not smaller. Because of this, you need to set the design-time cell height and width
    equal or smaller than a single image.
    The advantage of this approach is that the default image does not need to come from a dataset like with my suggestion.
    "You will find a fortune, though it will not be the one you seek." -
    Blind Seer, O Brother Where Art Thou
    Please Mark posts as answers or helpful so that others may find the fortune they seek.

  • Was reading book official appearing pop up came up asking if I wanted to upgrade-I pressed to do it and iPad is frozen with iTunes image and image of charger cord

    Was reading book on iPad
    Pop up asked if I wanted to upgrade- probably stupidly I agreed- now iPad screen is frozen with ITunes symbol and image of charger cord on screen- tried turning it off - no help.

    Carolyn explained how to reset the iPad. You don't need a tool or clip to do this...just your fingers.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    I do not think that is going to work, but try it.
    You are getting the connect to iTunes message and that usually means that your iPad needs to be restored.

  • Currency and Quantity fields problem in FM

    Hi ALL
    <b>Can anyone help me on this. Very Urgent</b>
    I created a FM, in that i used NETPR,MENGE,WEMNG.(CURRENCY , QUANTITY )  fields.
    When i am trying to activate, it is asking for reference fields.
    I don't know how to resolve it...
    Regards
    Prabhakar

    hi,
    pls refer to this thread for use...
    how can create a function module for currency and quantity fields
    Message was edited by: Ganesh Sundarakrishnan

  • CS4 Bridge - Image and Contact Sheet Problems (Windoze)

    Problem #1: Out of shear chance, the first directory that I picked on that contains press images, resulted in Bridge not displaying thumbnails, or even being able to work with the image, because Bridge declares that the JPEG file is not a JPEG image. But, here is the kicker, when creating the thumbnails, it does briefly display a thumbnail before replacing it with the JPEG icon. There is nothing wrong with the images as Photoshop CS4 has no problem working with the same images. Double-clicking on the JPEG icon in Bridge results is it calling Photoshop to display the image. Lastly the images were created with Photoshop CS3 on a MAC, as indicated in the EXIF data. I haven't tracked down a pattern yet, as I just installed the software last night. Even so, there is no way that Bridge should have trouble reading CS3 produced JPEG images, but it does.
    Problem #2: With the old contact sheet method, one could tell the plugin to include all sub-directories. I can't find a way to get Bridge to do the same thing. If it is there, it certainly is not user friendly. There was nothing online, or in the manual, about how to do that. While I like the idea of producing a PDF of the contact sheets, getting there is not so simple. I'm new to Bridge, having never having the need to use it prior to this release.
    Any help with these two problems will be appreciated.

    If Bridge can not show the thumbnail, Output workspace can not generate the PDF or web gallery for this image. Because it use the Bridge's DOM to process those images.
    For the subfolder issue, you could use the Bridge's 'Show Items from sub-folder'. You could find this option from the directly path list at the tool bar, or from Menu View->Show Items from submenu.

  • Roll-over image and image-link

    Hi,
    How can I create a rollover image in the portal ?
    On another hand, how can I create a simple image-link ?
    Thanks for your help
    Jean-Christophe

    Here is the code to the above problem, maybe it will help in
    answering the question.
    <mx:State name="Bag Open">
    <mx:SetProperty target="{bagUp}" name="visible"
    value="false"/>
    <mx:SetProperty target="{bagOver}" name="visible"
    value="true"/>
    <mx:SetProperty name="width" value="575"/>
    <mx:AddChild position="lastChild">
    <mx:Panel width="100%" layout="vertical"
    id="pnlBagSummary" title="Bag Summary">
    <mx:DataGrid dataProvider="{this.bagData}" width="100%"
    height="250">
    <mx:columns>
    <mx:DataGridColumn headerText="Item" dataField="item"
    width="150" itemRenderer="components.ProductView"/>
    <mx:DataGridColumn headerText="Qty" dataField="qty"
    width="50"/>
    <mx:DataGridColumn headerText="Description"
    dataField="description" width="200"/>
    <mx:DataGridColumn headerText="Price" dataField="price"
    width="75"/>
    <mx:DataGridColumn headerText="Actions"
    dataField="action" width="75"/>
    </mx:columns>
    </mx:DataGrid>
    <mx:ControlBar>
    <mx:Text text="Checkout will take you to our secure
    ordering page." fontSize="12" fontWeight="bold" textAlign="left"
    color="#191919"/>
    <mx:Button label="Checkout"/>
    <mx:Button label="Clear Cart"/>
    </mx:ControlBar>
    </mx:Panel>
    </mx:AddChild>
    </State>

Maybe you are looking for