Images are missing or cropped in preview mode.

That's pretty much it. When I preview my site, images are cropped or missing. What can I do?

Sorry, yes...so they are single placed images. For the most part every time I preview almost anything, many of the images either don't show up or are cut in half (or so). One I was just working on now shows a few frames with question marks where I previously saw a half image. I will do screen shot later on. Thanks for responding so soon.

Similar Messages

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"?

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
Thanking you in anticipation!

I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module. Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods.

How do I spot what images are RGB using the separations preview?

2 Questions: 1. How do I spot what images are RGB using the separations preview? 2. Is there an easy way to convert those to CMYK without opening each one in PS? I did this before all the time but I'm rusty and can't remember how I did it. I'm on CS6.

You can one of several methods to find out:
(1) You can use the Links panel. Open the Links panel. Go the panel menu and choose Panel Options. In the Panel Options dialog, Under Show Column check "Color Space". Now when you view your Links panel it will show the color space of all linked images.
(2) You could use Preflight, and set up a Preflight Profile. In the profile, go to the Color section > Color Spaces and Modes Not Allowed, and check RGB. Then any RGB images would be flagged.
(3) If you need to know BEFORE you place the images, use Adobe Bridge. Open the folder where the image are. Use the Metadata panel and view the color space of the images.

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

CR Viewer tool bar images are missing; Export and Print are not working

Hi There
I used Crystal report 10.5(VS 2008 base crytal report -- CRRedist2008_x86.msi), i developed ASP.net application using VB.net program(i used .net 3.5). One of the pages in the application is having crystal report viewer, which is calling a crystal report to populate the result. The report is working as expected on development machine (Win Vista). Hence, I moved the application onto Server (Windows Server Web; 32Bit OS and IIS). I installed the CRRedist2008_x86.msi, which added the "aspnet_client" under default website. As my site is a made as an application under default webiste. I tried...
a) By copying the aspnet_client folder into the website folder
b) By adding a virtual directory called "aspnet_client" under my website pointing it into the folder under "default website"
None of the trials are working for me.
When I click on Print or Export buttons (although their images are missing), I get the error sigh on bottom left (status bar) of the browser and the popping up the same giving me below error details
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; HPNTDF; InfoPath.3; MS-RTC LM 8; .NET4.0C)
Timestamp: Tue, 2 Nov 2010 15:11:12 UTC
Message: Object doesn't support this action
Line: 41
Char: 1
Code: 0
URI: http://65.123.xxx.x:37188/xyzweb/(S(uhgxkx45iwlrbancwzfunp55))/reportpage.aspx
Any help in resolving this issue would be greatly appreciated.
Thank You,
Edited by: skbo007 on Nov 2, 2010 4:11 PM

Hello All.
I am excited to let you know that the issue is being resolved.
Here is steps that lead me to resolution and solution..
I installed Fiddler2 and looked into every the debugging details of the transaction while running the report.
Learned that the crystal report is using the aspnet_client foler under "Default website" NOT under the crrent website.
Hence I tried to access the image via http path from local machine
http://myserver/aspnet_client/system_web/2_0_50727/CrystalReportWebFormViewer4/images/toolbar/export.gif.
(Notice, "mysite" folder is been removed)
I was expecting to see the gif on my browsers' body. It gave me an error.
Investigated further more on the error and found that the "Managed Pipe Line" of the respective application pool is to be changed to "Classic" instead of "Integrated"
changed it .. Boom...
Tool bar is showing up with proper images and as well the "Export" and "Print" functions are working as expected..
Hope this helps to those in the same situation.
Again.. this is one of many many solutions on this issues.
Thank You
Edited by: skbo007 on Nov 3, 2010 9:42 PM

Using Adobe Export PDF, I converted a PDF document into MS Word. However, all the images are missing

Using Adobe Export PDF, I converted a PDF document into MS Word. However, all the images are missing--replaced by black rectangles. How can I fix this? Thanks for any assistance.

Hi Ravinder,
As I mentioned in my email to you, I wasn't able to reproduce the behavior your described. The images appear properly.
Please let me know if you have any questions.
-David

'Some images are missing because they were deleted from the document'

Hi,
I created a document in Pages v5.2 last week and have just opened it and received the following message:
'Some images are missing because they were deleted from the document'
When I try and replace the missing images I get the following message:
'The image "filename" couldn't be inserted.'
When I try and reimport the original image I get the following message:
'The image "filename" couldn't be inserted. This image is of an unsupported type.'
If I try and insert an image that was not in the document before, in the same file format, it goes in fine.
If I insert the original image into a blank Pages document it goes in no problem.
I would also like to point out that the data folder still contains lots of versions of images in the document, but does not seem to have any of the ones I am actually using, which I guess is where the problem is. However I have no idea how or why these specific images have been deleted.
Any light on how this problem has come about, and the best possible way to fix it would be greatly appreciated.
Alex

I have Pages v5.2.2 on OS X 10.9.4. I can not reproduce your stated issues with images in this version of Pages. I don't have a solution for you. See my test in the third paragraph. If I were experiencing this behavior, I would perform a Safe Boot to clear out System caches, and try again, before kicking Pages v5+ to the curb.
The Safe Boot would be pressing and holding the shift key at boot chime, and until a horizontal progress bar shows on the screen. At the eventual login screen, after you type your password — press and hold the shift key — press the right arrow to login, and release the shift key after the Finder menu bar appears. Then reboot normally.
I have created a new document. Dragged and dropped an image into it and saved. Exited Pages. Reopening worked fine. Deleted the image, and proceeded through the following steps, punctuated by save, exit, reopen, and deliberate image removal. Different .jpg image each time. About mid-way through the following item list, I rebooted the MBA just to throw some "spin" into the process. I did not perform a Safe Boot prior to this series of tests.
Toolbar > Media insert
Insert > Choose jpg into document
Text Box image fill
Shape image fill

Images are missing in Project Manager

I’m replacing old images with new ones in RoboHelp HTML 10.
I’ve deleted the old pictures in Design view and pasted the new pictures in. (I know this is not the recommended way but with lake of time I found it to be the fastest way and we don’t feel the need to give the files described names at the moment.)
It has worked fine until now when I noticed that some images are not showing in Project Manager. I see the “folder” Images and I see a lot off images there but some are missing. The “missing” images are shown in Design view and in the browser after publishing. But in the report Unused files the “missing” images are listed as unused.
I have tried to
close and reopen the project,
generate and publish the project,
delete an “missing” image from Design view and insert it by using Insert / Image. After saving this image, and some other “missing” images, are shown in Project Manager. But not all “missing” images.
Does anyone know why this is, or more important how to get Project Manager to show all images that are used in the project (without having to go through all 154 images trying to figure out which are used but “missing”)?
Some more facts:
They are all gif-images.
They are all stored at the top-level in the project folder. (Are there a limit how many images there can be in the top-level folder? Should I create a separate folder and move the pictures there?)
HTML-code for one “missing” image:
<img src="image7.gif" alt="" style="border: none;"
border="0" />
Grateful for any input!

I would have said "Try renaming the folder containing the images in Rh's Project Manager. That sometimes fixes the problem. You can revert to the old name afterwards."
Keeping all the images, and / or topics, in the root is never a good idea. It can slow things down and it's messy.
You can move the images you can see but obviously you cannot move the others. Try moving a topic that has one of the images to a different folder and see if that refreshes. Also try deleting the CPD file and reopening Rh.
Backup first.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I have updated my website, and uploaded via FTP, but some images are missing. I have deleted them in i

I have published a website with iWeb on MobileMe quite successfully. I purchased a second domain name, and republished the same site on GoDaddy before trying to point my MobileMe website name to the GoDaddy server. I was unable to upload several pictures to the second site, and posted my dilemma here. It was suggested that I try using Cyberduck to publish via FTP, which I did. I was still missing the same images. The error message says that there was a communications error with the FTP server and to try again later. I have been able to upload several more new images to the second domain name just by using iWeb's publish feature.
I want to point my MobileMe website name, www.melissaveres.com to GoDaddy, which is now hosting www.mveres-engraver.com but it will only show the site as it is currently published, with several missing pictures. I have tried to delete the photos in iWeb, bring them back in, and republish but with the same results. I have contacted GoDaddy support, who can only tell me there is no file information for those open (missing) pictures, they have heard of this happening before, but had no information on how or if it was resolved. Anyone know how to get these pictures up before I move from MobileMe?
Melissa

Bring up the Activity window (Command+Option+A) for you site and check to see what files are missing and where they belong. The URL for the missing files will tell you what folder they should be in.
Then publish you website to a folder on your hard drive and open it locally with your browser. Check to verify all images and present and the site works as you want. Then you can upload the missing files or folder containing the missing files or the eintire site folder to your GoDaddy account with Cyberduck.
OT

Keynote: Some images are missing

Ever since I upgraded to Keynote 6.2 and Mac OS 10.9.3 my images are deleted somewhere between me saving the file, and retrieving the file again later.
Last night I was working on a brand new presenation I created (not upgraded or imported). Everything looked great. I saved the file on my computer. The next day I opened up the presentation to work on it, and I received that warning dialog and about half of my images were gone. I cannot tell if there is any common trait between the ones that were gone, or not.
This is causing me to lose hours and hours of work. I'm either going to switch to Powerpoint, or downgrade my Keynote. Not sure which.
I see lots of people with this same issue, but under different circumstances than mine.
Has anybody successfully resolved this issue?

Ah! That is perhaps the missing piece of the puzzle.
I use Google Drive to synchronize the folder on my computer with my Google Drive in the cloud. Thinking back on it, I probably created the presentation on my home computer, then tried to open the presentation on my work computer. Bam. Missing images.
I will have to run a test to confirm, but I feel very certain that this is most likely the culprit.
The new Keynote file format seems to contain multiple files, and that probably was the catalyst.
Unfortunately, that means that your zip file workaround will not work for me.

Can open pdf in CS3 with embedded images, put when opened in CS6 or CC the images are missing

Hi, Would really appreciate some help on this.
I frequently get artwork from clients saved as illustrator eps and pdfs files, that can be opened within CS3 and printed, no problem.
Having recently gone to CS6 and now CC I sometime find I can't open artwork supplied, as the images (links) are missing.
The same documents seem to open in CS3 without any problem.
Could someone explain why this is, and how I can open these documents within the newer versions of illustrator without the missing link problems
kind regards
Ed

I suspect your documents are some higher version than CS3 but lower or equal than CS6.
So in CS3 you actually open the PDF part with images ambedded, while CS6 accesses the Ai part without images.
You really should ask the clients to supply files according to whatever specification you need.
But you can also extract the images from the PDF parts of your file simply by opening them in Photoshop. Then select "Images" in PDF options and open the images you need.

Firefox does not display websites correctly. Images are missing or out of position.

Too much white space. How do I downgrade back to 3.6.3? I have another computer running that version that displays everything correctly. Text is also placed incorrectly. Even this Mozilla page has no images. Only white space with a fuzzy 'mozilla' in the upper left-hand corner.

Thanks:
The Fonts & Colours option worked wonderfully for me and now my pages are displaying the colour and images I expected to see. So very simple in the end. Is it related to the current upgrad? At least I will not have to trouble with attempting to revert to an earlier version.
Bruce

Images are missing in Aperture v2.1.4 after Project folder is renamed.

I was working with a batch of pictures (images) in Aperture the other day. Opening new projects and renaming some old projects. All to add some meaning to the content of the Projects. I had 150 pictures (images) in a "Colorado" project folder and decided to rename the project to "Colorado 2011". Looked for the images in "Colorado 2011" to make an album and there are no more pictures. All have disappeared.
Can everyone tell me how to recover the pictures (images)??

I would have said "Try renaming the folder containing the images in Rh's Project Manager. That sometimes fixes the problem. You can revert to the old name afterwards."
Keeping all the images, and / or topics, in the root is never a good idea. It can slow things down and it's messy.
You can move the images you can see but obviously you cannot move the others. Try moving a topic that has one of the images to a different folder and see if that refreshes. Also try deleting the CPD file and reopening Rh.
Backup first.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I have lightroom 5 when i cannot import my RAW images. When I tried a blank box for the images are there stating tha the preview for the image is unavailable

I have lightroom 5 and I cannot import my RAW images When I tried a blank box for my images appear stating that my previews is unavailable in this file. When i do hit import it comes out 0 in my catalog

Jim Hess asked:
And if you use Nikon Transfer to download the images?
I don't see the answer.

HT201317 Why all images are not loaded to photostream, many new images are missing ?

I took many images with iphone 5 during a holiday trip, but some latest images from trip where not loaded to photostream and some images after that where loaded, why ?

Hello, you may like article on iCloud: Photo Stream Troubleshooting: http://support.apple.com/kb/TS3989 the article has different scenarios that direct you on how to best troubleshoot.

Images are missing or cropped in preview mode.

Similar Messages

Maybe you are looking for