Images are not showing when page load

Hello All
I am having lot of webparts on my page.
In two of them webpart i applied xslt and showing image of created by person in this
1)Announcement webpart(Wall updates)
2)Showing blog using content by query webpart(Blogs)
While page loading not able to load images in both webpart view.
But when i decreases webparts on page images rendered properly.
I think it is taking time to fetch images so timeout and showing default images.
Kindly suggest me some way to tackle and images will displayed properly
Thanks in advance
Varsha Patil

Hi,
According to this documentation from MSDN about
SharePoint Server 2010 capacity management: Software boundaries and limits:
“In SharePoint Server 2010, there are certain limits that are by design and cannot be exceeded”, “The default values for these limits were defined by testing, and represent the known
limitations of the product. Exceeding supported limits may cause unexpected results, significant decrease in performance, or other harmful effects”, “in most cases, operating at or near an established limit is not a best practice, as acceptable performance
and reliability targets are best achieved when a farm’s design provides for a reasonable balance of limits values”.
So it is not recommended to add many web parts into one page.
If there is a special need to display many web parts in one page, it is recommended to reorganize the content to minimize the number of web parts in use and customization will
be needed sometimes if the built-in web parts can’t meet the requirement.
Best regards
Patrick Liang
TechNet Community Support

Similar Messages

RoboHelp HTML 9.0.1 - My images are not showing when published

Hi all,
We have just upgraded from RH5 to RH9. We are using IE9. All of our projects transferred over just fine - except for one. We are able to publish this topic; however, the images within the topics are not being displayed when we publish - we get the dreaded red 'x'. We can see the images when viewing the topics in RH. However, they are not listed in the images folder in the Project Manager. The images can be seen using Quick view and Internet view. However, they cannot be seen when we generate a Word document.
Every other project is functioning properly. We can publish everything else just fine. This one project is our oldest project, but I don't know if that has anything to do with it.
Any guidance or direction will be greatly appreciated.
Thanks,
Linda

Rick,
Thanks for your help. I did attach one of my images as a baggage file, and low and behold, the image appeared in my topic after publishing (I'm sorry I thought you were both nuts). I just hope there is something I can do short of attach over 6500 images as baggage files.
Here is the HTML for one of my topics. Please let me know if you see anything hinky in there. I bolded where the jpg image is:
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="generator" content="Adobe RoboHelp 9" />
<title>Changing a Private Report's Expiration Date</title>
<link rel="StyleSheet" href="default.css" type="text/css" />
</head>
<body>
<p><img src="image73.jpg" alt="" style="border: none;" width="283" height="132"
border="0" /></p>
<p> </p>
<ol type="1">
<li class="p"><p>Determine which report you wish to change.</p></li>
<li class="p"><p>Click the <span style="color: #00478e; text-decoration: underline; ">options</span>
link for the report.  </p></li>
<li class="p"><p>Enter the new expiration date in the <span style="font-weight: bold;">Report
Expiration</span> field.</p></li>
<li class="p"><p>Click <span style="background-color: #025be2; color: #ffffff;"> save</span>
. Or, to cancel this change and return to report parameters, click
the <span style="background-color: #025be2; color: #ffffff;"> cancel</span>
 button.</p></li>
</ol>
</body>
</html>Rick,

Why aren't my FW (PNG) image are not showing up

Hey guys.
This is really bugging the hell out of me. I feel like I
can't move on until i can figure out why my PNG images are not
showing up in preview (F12). They did yesterday before I deleted
some pages and renamed old pages I no longer needed.
All my images that was done in FW are in my root folder in
the file panel. i didn't move any of those. When I double click on
the image to bring up the "select image source" in the URL it
starts off with two periods then a slash and then the name of where
it's located as well as the name of the image. The "relative to":
is site root. i didn't change any of these setting before I deleted
and renamed pages in my file panel.
Oh, and my Ap Divs show up in light gray boxes.
Please help!
CS3 Mac

I'm confused by the subject line! Is this like 'all of your
base are belong
to us?' 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Dooza" <[email protected]> wrote in message
news:gki5he$3pu$[email protected]..
> Why_ATL wrote:
>> Hey Alan
>> is the filename exactly what it should be? YES
>> Are these .png files for web use, or are they PNG
fireworks original
>> files
>> which are very large in file size because they
contain all the info on
>> layers and such? They are .png files for the web. I
can't figure out why
>> my Div is showing up in preview instead of my images
There just Div's
>> with the little blue question mark.
>>
>> This is getting harder and harder. I'm trying to
laugh so i don't get a
>> head ache over this. This is weird.
>
> Without a link we can only make wild stabs in the dark.
>
> Dooza

I am trying to create an responsive HTML5 output, but images are not showing up.

When I preview my output, the images are note showing up. It is simply the blank outline of the image with the little image icon in the top left corner.
As it is compiling I see the message "Warning: Image maps are not converted to relative size". Is there something in the setting that I need to change, or is that even the problem?

Can you check your output folder: are the images copied to your output? If they are missing, are the images listed in the Project Manager pod in RoboHelp?
The warning is unrelated. Since image maps work with pixel coordinates, you can't simply make them responsive. You are probably using an image map in your project. This is causing the warning. It is not a problem since the image map will still work. But if the image map is very large, it may give a bad experience on smaller screens. You may have to decide whether to change or remove the image map if you want to support mobile.

Why images are not showing?

When I add to image to slider or products, the images are not showing and wrting <tag_image no link> or <tag_list image no link>. I already match pictures to image filed on web apps.

Hi Alfred, so you know you will run into several issues if you do not follow naming conventions with folders and images on the web.
If you have spaces for example this causes a lot of problems.
That %20 stuff you see in your links are because you have spaces.
Any time you have a space in a file or folder you should replace it with a -
Removing them I can get a 404 error but support will only be the ones who can say if the images are uploaded correctly, they also may have not been saved correctly and are corrupted.
But what you can try is renaming the folder to...
granite-cobbles
And try one of the images to be..
sawnface-tubled-lrg.jpg
And see if that works.

Email images are not showing in my new iPad.

email images are not showing in my new iPad. This was not a problem initially, but just started. I use yahoo mail. Any thoughts?

This seems to be a problem with Yahoo! that started within the past few days. I am assuming that you are accessing your Yahoo! Mail through Safari. Until a fix is issued, you have two options -- (1) use the Mail app included in iOS, logging in with your Yahoo! account information or (2) when in Yahoo! Mail in Safari, click on your profile name/pic in the bottom left corner, choose Options, and then choose the last option, which displays your e-mail using the older classic version of Yahoo! Mail. It's not as pretty or easy to manuever around, but at least it shows the images in your e-mails, which is the most important thing. Both Apple and Yahoo! have been contacted about this issue, so hopefully a fix will be released soon.

Images are not showing up on my macbook pro

I just noticed that images are not rendering when I'm trying to upload them via my Macbook Pro.
I also can't see some videos or images on websites. I do have Flash player installed.

eringlass wrote:
I do have Flash player installed.
Is it the latest version?
Which os version are you using?
Please describe in detail all you have attempted to do in order to resolve the issue.

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

Thank you for the sugestion, but it was working fine both on the lock screen and on my home screen. I check all my settings and it is how it was from Friday, when I got the iPhone 5s. It just stop working. The only way I can fix it is by shutting down the phone. It will work for a while, then it won't.

Images are not showing up

My presentation is like a slideshow and the images are all
loaded in my library and draged and drop onto the stage, which they
all can be viewed just fine. All are jpeg and relatively the same
file size, nothing really differant about them, but when I preview
or publish the presentation, 3-4 images are not visible. A couple
of them just don't show up but one image disappears when I go to
another frame and come back to it. Example: I view image01, its
veiwed fine, I go to image02 and its fine, I go to image03 its
fine, I go back to image02 and it doesn't show up!
I don't understand why its happening since there is no
actionscript on the image or anything else done to it that I can
see. Its just an image. Anybody else had this problem and know what
I shoud do?

Hello? Can anybody help me?

Pasted image does not show when imported to AI

Mac OS 10.4.11 - Acrobat CS4. I made a contact sheet of images in Bridge which was saved as a PDF. In Acrobat I pasted another image (different size ratio) and saved again. However, when I placed the image in Illustrator the pasted image did not show, only the original contact images. It does not show at preview level either, but when the PDF is opened it is definitely there. I tried to 'flatten' it but cannot find a option that works.See attached file.

I would love to help you, but I'm totally lost as to what you are trying to do.
Here are my questions:
Mac OS 10.4.11 - Acrobat CS4.
There really isn't an Acrobat CS4. There is Acrobat 9 that shipped with CS4. But let's go one.
I made a contact sheet of images in Bridge which was saved as a PDF.
OK, that's good, I understand what you're doing.
In Acrobat I pasted another image (different size ratio) and saved again.
OK, this is where you lost me. Acrobat does not have a paste image ability. Exactly how did you get that image onto the Acrobat page? You copied from where? You pasted how? This is totally screwey.
However, when I placed the image in Illustrator the pasted image did not show, only the original contact images.
Placed what image? The original PDF contact sheet? Why are you trying to put it into Illustrator? There's no reason I can think of to do such a thing.
PDF is usually the final output form. It isn't a page layout tool to place into other programs.
It does not show at preview level either, but when the PDF is opened it is definitely there.
Still trying to figure out what you talking about.
I tried to 'flatten' it but cannot find a option that works.See attached file.
You have totally lost me. There is no "flatten" in PDF? That's in Photoshop? What are you doing???

Horizontal Axis not showing when initial loading

Hi,
We are on Dashboard 4.1 SP3.
I have drilling down configured on the Dashboard report. The issue is when initial loading the dashboard. the horizontal text are not showing completly, untill I click the other column of the parent column, it shows the child horizontal text.
Could you please help.
Thanks,

Hi Dave,
There are some issues still in displaying the horizontal axis.
1844514 - Dashboard X axis labels are cutoff
As a workaround what you can do, use the range slider to make the date text to display vertically rather than horizontal or you can enlarge the size of the chart at the max to make them to display vertical.
Hope this helps!!!
--SumanT

Apex stored images are not showing!

i have slide show files which is stored in apex repository, i try to show those images but not showing?
please login my Dev environment and see if i missed something?
http://apex.oracle.com/pls/otn/f?p=57181:9:109145937897777::NO
Workspace; ram_r&d
user/password: aramani/apex
Thanx,
Ram

Ram
The images of slide1 are not showing because the image html is
<img alt="" src="wwv_flow_file_mgr.get_file?p_security_group_id=12651340501132311999&p_fname=1.jpg?timestamp=1375095758462"/>
Notice the extra parameter timestamp. That is causing the images not to be found.
Having a quick look add the code of the BxSlider v4.1.1 then there is this piece of code
g=function(e,i){
            var s=e.find("img, iframe").length;
            if(0==s)return i(),void 0;
            var n=0;
            e.find("img, iframe").each(function(){
                t(this).is("img")&&t(this).attr("src",t(this).attr("src")+"?timestamp="+(new Date).getTime()),t(this).load(function(){
                    setTimeout(function(){
                        ++n==s&&i()
                    ,0)
This adds the timestamp parameter.
So it seems to me that this jQuery plugin is not compatable with apex.
And I would recommend looking for a different one. One that doesn't touch the source of your images.
Nicolette

Images do not show when deployed on remote server

We are using jdeveloper 11.1.2.1, adf and integrated weblogic and remote server has weblogic where we deploy the application for testing.
We have a login.html page. when deployed and running the image in login.html does not show in FF or IE 8. It shows on IE9. when deployed on the remote server.
When deployed on the integrated server only fire fox shows the image. None of the other web browsers show the image in login,html
Here is my login.html
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>

<meta http-equiv="Content-Type" content="text/html;charset=UTF-8"/>
<title>Application Login</title>
</head>
<body>
<div class="header">
<div class="head_logo"><img src="images/imageLogo.JPG" alt="DASIS Logo" height="73" width="862"/></div>
</div>
<div class="navigation"></div>
<div class="content">
<div class="contentTitle">
Welcome to ISATS online.
<hr/>
</div>
<div class="contentArea">
<p class="Arial">To login, enter your user ID and password, then click the Login button.
</p>
<form method="POST" action="j_security_check">
<TABLE CELLPADDING="5"
SUMMARY="This table contains a web form
with fields for ID and password entry." >
<TBODY>
<TR>
<TD ALIGN="right" VALIGN="top">
<span class="Arial">User ID:</span>
</TD>
<TD VALIGN="top" ALIGN="left">
<input type="text" value="" alt="Enter User ID" name="j_username"></input>
</TD>
</TR>
<TR>
<TD ALIGN="right" VALIGN="top">
<span class="Arial">Password:</span>
</TD>
<TD VALIGN="top" ALIGN="left">
<input type="password" name="j_password" value="" alt="Password"></input>
</TD>
</TR>
<TR>
<TD ALIGN="right" VALIGN="top" width="85">
</TD>
<TD VALIGN="top" ALIGN="left">
<input type="submit" name="submit" value="Submit"></input>
</TD>
</TR>
</TBODY>
</TABLE>
</form>
<span class="Arial">
Please contact Help Desk for assistance with the User ID and Password.
<br>
The Help Desk number is XXX) XXX-2300.
</span>
</div>
</div>
</body>
</html>
Any help is appreciated
Edited by: user597294 on Jan 11, 2012 3:58 PM
Edited by: user597294 on Jan 11, 2012 4:01 PM

The problem does not seem to be with TopLink or JPA, so you may want to post this question to a different forum, such as the JDeveloper/ADF forum at:
JDeveloper and ADF
If the image itself is being sent but not loaded, you might check that it is a display issue with the browser being used.
Best Regards,
Chris

Some of the images are not showing up on my Blogger blog even though the HTML is there. They do show up in Opera.

Here is the link to the blog post -
http://happyholidays-blog.blogspot.com/2010/09/welcome-to-trick-or-treat-street.html
Three days ago I went to a post from last year and an image was gone. The code was there but not the image.
It doesn't get rid of all the images just certain ones and they are consistently gone. It is not a random deletion of images.
I have had images not show up on other blogger sites.

See http://kb.mozillazine.org/Images_or_animations_do_not_load
It is possible that you clicked "Block Images" in the right click context menu while trying to save an image.
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions<br />
See [[Options window - Content panel]]
*A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the <i>Media</i> tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

Images are not showing in uitable view .

When running the app on simulator the images are comming well in table view , but no images are showing during in iPad Device and also showing no error .
I debuged the app ane the pointer is going to
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath , and the image is set to image view of tableviewcell , but still showing no image in iPad . but working fine in simulator .
Please help me .
Thanks

99 times out of 99, when images show on the sim but not on the device, it is due to the fact....that's right...fact...that the sim is your computer and file names when code-consumed ignore case.
iOS on the other hand, and this is important, so take notes....is case-sensitive.
MyImage0666.PNG in the Finder...your project folder....is not the same as myImage0666.png

Images are not showing when page load

Similar Messages

Maybe you are looking for