Images Broken Across Pages error but the largest image is 700 pixels

While submiting an epub to iTunes I got a ticket Images Broken Across Pages. The largest image is 518 x 700 pixels

As this group is iBooks Author rerlated, you may prefer to re-post here...
https://discussions.apple.com/community/ibooks_author/creating_epubs

Similar Messages

Login page error in the ISA b2b 5.0 application.

Hi all
i deployed the CRM ISA b2b 5.0 application successfully in the j2ee engine and after that i have done the XCM configuration also successfully and i tested thru run test for both JCO and IPC components all are successful.
now when i tried with the b2b application with the following URL it is giving some different error.it is not related to application it seems the different error related to some browser or i am not sure.
URL : http://hsdnt24s15:50400/b2b/b2b/init.do when i press enter here
then it showing the following error but the error it seems not related to application side, it is different error.after pressing the enter with the above URL then URL itself is changing in the browser as like the following URL
browser URL : https://hsdnt24s15:${https.port.core.isa.sap.com}/b2b/user/secureSwitch.do
Error Details:
The page cannot be displayed
The page you are looking for might have been removed or had its name changed.
Please try the following:
Open the hsdnt24s15:${https.port.core.isa.sap.com} home page, and then look for links to the information you want.
If you typed the page address in the Address bar, make sure that it is spelled correctly.
If you still cannot open the page, click the Internet Explorer
Search button to look for similar sites.
Internet Explorer
Please can you help me what is the solution to my problem.
i will reward the maximun points.
Regards
Sunil

Hi Mike
i have some other problem now , can i you help me on this.
i have the logon problem in the CRM ISA b2b 5.0 application when i have accessed thru the following URL.
http://hsdnt24s15.hclt.corp.hcl.in:50400/b2b/b2b/init.do
it is giving the error as follows.
Error while executing SAP E-Commerce Application with UME system; try again to log on. If the problem persists, call our hotline.
before that we have made the XCM configuration for CRM ISA b2b 5.0
Can you guide was there any problem in the XCM configuration?
Please help how to resolve this issue for logon problem in ISA b2b 5.0?
Regards
Sunil

In Adobe Acrobat X Standard, our user used to be able to resize drawings to 8.5 x 10, it stopped working yesterday. It allows her to do this without an error but the size does not change?

In Adobe Acrobat X Standard, our user used to be able to resize drawings to 8.5 x 10, it stopped working yesterday. It allows her to do this without an error but the size does not change?

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center? I can select 2 page view and cover page in 2 page view, but the dotted line shows up. Thank you!!

How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center? I can select 2 page view and cover page in 2 page view, but the dotted line shows up. Thank you!!

Hi skt102711,
I would like to inform you that acrobat doesn't support .epub to .pdf format conversion. Please browse this Link for more information : Supported file formats | Acrobat, Reader
Regards,
Rahul

When I try to quit Firefox, the open page closes, but the application does not. Must Force Quit to close the application.

I am using a Macbook running 10.6.8 with Firefox version 9.0.1. Recently, when trying to close the Firefox application, the open page disappears, but the application stays open, but is unresponsive. I must force Quit the application at this point. If I try to work in the Menu Bar I get the spinning beach ball until I do the Force Quit. This isn't right and is making me nervous about the reliability of this browser.

Hi swf13245-
Is Firefox working ok up until it freezes when you try to close it? I found an article on how to troubleshoot Firefox when it hangs- but this typically is for users who have trouble while using the application as opposed to just when shutting it down:
[[Firefox hangs]]
Hope that helps.

Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7

Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7.

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

I am developing a site where the content is 1300 pixels in depth but the browser background is 2500 pixels in depth. I want the browser background to be just a little longer than the content, but cannot seem to make that happen. Does anyone have an idea

I am developing an iWEB site where the content is 1300 pixels in depth but the browser background is 2500 pixels in depth. I want the browser background to be just a little longer than the content, say about 1340 pixels, but cannot seem to shorten the browser measurements. Does anyone have an idea how I can solve this problem? I have tried to make height adjustments in the Page Layout section of the Inspector, but content height heading has no affect on anything. I have built about 75 sites in iWEB and this is my first experience like this.

That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

Fetch Error but the row exists

I have an application when you go to the next page, you sometimes get the following error:
ORA-01403: no data found
Error Unable to fetch row.
OK
I then edit the page and run it without making changes, and it works with no errors. It happens on two particular pages.
The application is on apex.oracle.com
Workspace: RGWORK
Application: 41368 - Online Certification Application
Username: TESTER
Password: test123
Start with page 33
Select last checkbox (Small Business Enterprise) and click on start application
The next page, Name and Address (page 2) will be displayed. Fill out all the information and click on the "Next Question" button.
I usually get the error on the next page (Page 27) or the following page (Page 28)
Can someone please help me?
Robert

I think the problem is that your ARF processes are firing after part of the form is painted. Change them to fire After Header.
A related problem (which I fixed in page 28) is that the metadata for the DML Fetch Row process on page 28 was corrupted. If you export the page, or application, you'll see this:
p:=p||'#OWNER#:OCA_FIRMS:P28_FIRM_ID:FIRM_ID|U';
begin
p:=p||'#OWNER#:OCA_FIRMS:P28_FIRM_ID:FIRM_ID|U';
wwv_flow_api.create_page_process(
p_id => 4630220837539919989 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_flow_step_id => 28,
p_process_sequence=> 10,
p_process_point=> 'AFTER_SUBMIT',
p_process_type=> 'DML_PROCESS_ROW',
...The first assignment statement, above, was this before I fixed it:
p:=p||'F|#OWNER#:OCA_FIRMS:P28_FIRM_ID:FIRM_ID|U';
That 'F|' is incorrect. We are aware that this happens sometimes but are not sure exactly how.
Scott

When I duplicate a book in Aperture 3.6 since I upgraded to Yosemite, the pages duplicate but the photos do not???

I recently upgraded to Yosemite and I have Aperture 3.6. When I now try to duplicate a book, the page structure duplicates but none of the photos appear?

Hi, Thanks for the info. I can't get the First Aid window to appear. I went into the "Trash" and emptied everything in there (some duplicate versions of photos etc. and I deleted the map page and remade the map. Mow the book duplicates?
I have one other problem that happened after upgrading to Yosemite. The print quality on 4 previous books I submitted was pretty poor. I contacted the Apple Store, they said to upgrade to Yosemite as all of their printers were geared to that op system. They gave me a credit for one book, told me to upgrade, remake the book and resubmit and see what it looked like the second time around. When I clicked on "Buy Book", then "Preview" everything was good. I previewed the book to make sure that the spacings / borders etc. were all good as I have always done, and then closed the Adobe window / PDF and clicked "Continue". The next page appeared like normal with my billing info etc. and I clicked "Continue". Normally at this point a window drops down saying that the order had been received and that the data was loading. This time a window dropped down for a brief second and disappeared and then I got an error message that the "connection had been lost, try again later". I found out that the credit card billing went through to the credit card company but the book data did not. I had to go through a bunch of hoops to get the charges deleted on my credit card account and finally got that solved. I went back and tried again with the book. Same thing happened, same error, only this time I noticed a small text and a spinning wheel just above the browser at the bottom of the page saying "loading". I let it run and finally it quit, about half an hour later I got an email from the Apple store saying the book was being processed and supplying an order number. Usually, before I switched to Yosemite, I would submit, "buy book", preview and continue. A window would drop down saying the book had been submitted. Then I'd get an email with the order number saying I had up to 90 minutes to cancel the order. This time I got none of that - only the order email about 30 minutes later?? Since then, I tried a second book with the same results (but knew what to look for this time, so I let it run through the step). I got emails yesterday providing tracking info for both books so obviously they were printed and shipped okay. Any ideas?

TS3694 I installed itunes onto my desktop but it would not recognise my device & eventually crashed the desktop. I tried my laptop & I got the 3014 error but the ipod has crashed and only shows a USB pic & itunes logo.

Hi, I opened my new ipod 4th generation and had a play with it to initially find & install the amazon audible which I had been told was easy. Anyway I did it so I thought I would have a play with itunes. It regognized all my tracks and I managed to buy an album which I could not find in 'music'. I had to play each tarck, one at at time while they were recognised in history.
While on my laptop I tried to install my tracks but nothing happaened. I was asked to update which I did & then my ipod locked. I've turned it off but when I switch it back on iget a picture of a USB cable pointing to itunes. Logically I thought thaht meant connect to itunes, itunes woud not recognise it and gave a 3014 error.
I have a brand new ipod that is useless, i Feel useless like I am doing somthing wrong. Strange thing is I upgraded from a Philipps GoGear Connect which has bad reviews but at least I could listen to my music, play games and use audible.
Has anyone got any ideas. It was purchased through Amazon/

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Next try:
3014
Restoration of code 3014 will not work?: Apple Support Communities

No page error but also no image displayed on the report ?

Hi Everyone,
First I like to apologise for the long post, but I would like to make sure that I am providing the full information so as not to waist anyone's time.
As I am having problems displaying images, in a report, but I am not getting any errors, all I see is the typical red X where the image shout be. When I right click the red X and select properties, it all appears to be fine:
http://127.0.0.1:8080/apex/ZOROPIO.FILE_TO_BLOB?p_file_id=6
except that Type: Not Available
and Size: Not Available
So I decided to creating a table and procedures to specifically test my approach and I am still getting the same result.
I have an Apex page where uses can upload an image to the system, using the following Page Process:
On Submit - After Computations and validations
FOR REC IN( SELECT FILENAME, MIME_TYPE
FROM HTMLDB_APPLICATION_FILES
WHERE NAME = :P4_FILENAME
LOOP
INSERT INTO AB ( FNAME, MTYPE )
VALUES (REC.FILENAME, REC.MIME_TYPE);
END LOOP;
ZOROPIO.BLOB_TO_FILE(:P4_FILENAME);
DELETE FROM HTMLDB_APPLICATION_FILES
WHERE NAME = :P4_FILENAME;
The AB table is define as:
CREATE TABLE "AB"
( "DB_ID" NUMBER NOT NULL ENABLE,
 "FNAME" VARCHAR2(256 CHAR) NOT NULL ENABLE,
 "A_IMG" BFILE,
 "MTYPE" VARCHAR2(256 CHAR),
 CONSTRAINT "AB_PK" PRIMARY KEY ("DB_ID") ENABLE
CREATE OR REPLACE TRIGGER "BI_AB"
BEFORE INSERT
ON ZOROPIO.AB
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
tmpVar NUMBER;
BEGIN
tmpVar := 0;
SELECT NVL (MAX (DB_ID), 0) + 1 INTO tmpVar FROM AB;
:NEW.DB_ID := tmpVar;
IF :NEW.FNAME IS NOT NULL THEN
:NEW.A_IMG := BFILENAME ('IMG', :NEW.FNAME);
END IF;
END BI_AB;
ALTER TRIGGER "BI_AB" ENABLE
The BLOB_TO_FILE procedure is defined as:
create or replace PROCEDURE BLOB_TO_FILE (p_file_name VARCHAR2) AS
l_out_file UTL_FILE.FILE_TYPE;
l_buffer RAW (32767);
l_amount BINARY_INTEGER := 32767;
l_pos INTEGER := 1;
l_blob_len INTEGER;
p_data BLOB;
file_name VARCHAR2 (256);
BEGIN
FOR rec IN (SELECT ID
FROM HTMLDB_APPLICATION_FILES
WHERE Name = p_file_name) LOOP
SELECT BLOB_CONTENT, filename
INTO p_data, file_name
FROM HTMLDB_APPLICATION_FILES
WHERE ID = rec.ID;
l_blob_len := DBMS_LOB.getlength (p_data);
l_out_file := UTL_FILE.fopen ( 'IMG',file_name, 'wb', 32767 );
WHILE l_pos < l_blob_len LOOP
DBMS_LOB.Read ( p_data,l_amount, l_pos, l_buffer );
IF l_buffer IS NOT NULL THEN
UTL_FILE.put_raw (l_out_file, l_buffer, TRUE);
END IF;
l_pos := l_pos + l_amount;
END LOOP;
UTL_FILE.fclose (l_out_file);
END LOOP;
EXCEPTION
WHEN OTHERS THEN
IF UTL_FILE.is_open (l_out_file) THEN
UTL_FILE.fclose (l_out_file);
END IF;
END BLOB_TO_FILE;
This works fine, as I can see the data in both the OS Directory and the AB table after the user uplodas the image.
I have then define an Apex Report pageto display the uploaded images. The page has the following Source:
SELECT FNAME, MTYPE,
'<IMG SRC="ZOROPIO.FILE_TO_BLOB?p_file_id='||NVL( DB_ID, 0)||'"HEIGHT="'||80||'"WIDTH="'||100||'"/>' AS IMAGE
FROM ZOROPIO.AB
The ZOROPIO.FILE_TO_BLOB procedure is defined as:
CREATE OR REPLACE PROCEDURE ZOROPIO.FILE_TO_BLOB ( p_file_id NUMBER ) IS
l_mime_type VARCHAR2 ( 256 );
l_file_name VARCHAR2 ( 256 );
l_bfile BFILE;
l_blob BLOB;
l_bfile_length NUMBER;
l_blob_length NUMBER;
BEGIN
SELECT FNAME, MTYPE
INTO l_file_name, l_mime_type
FROM AB
WHERE DB_ID = p_file_id;
l_bfile := BFILENAME ('IMG', l_file_name);
-- MAKE SURE THE FILE EXIST
IF ( DBMS_LOB.FILEEXISTS( l_bfile ) = 1 ) THEN
DBMS_LOB.CREATETEMPORARY ( l_blob, TRUE, DBMS_LOB.SESSION );
DBMS_LOB.FILEOPEN ( l_bfile );
l_bfile_length := DBMS_LOB.GETLENGTH ( l_bfile );
DBMS_LOB.LOADFROMFILE ( l_blob, l_bfile, l_bfile_length );
DBMS_LOB.FILECLOSE ( l_bfile );
l_blob_length := DBMS_LOB.GETLENGTH ( l_blob );
OWA_UTIL.MIME_HEADER( NVL ( l_mime_type, 'Application/Octet' ), FALSE );
HTP.P ( 'Content-length:' || l_blob_length );
OWA_UTIL.HTTP_HEADER_CLOSE;
WPG_DOCLOAD.DOWNLOAD_FILE ( l_blob );
DBMS_LOB.FREETEMPORARY( l_blob );
ELSE
RAISE_APPLICATION_ERROR(-20007, 'Requested IMG does not exist');
END IF;
END FILE_TO_BLOB;
I have GRANT EXECUTE to ZOROPIO for both the procedures:
BLOB_TO_FILE
FILE_TO_BLOB
The Oracle database verison, Apex version, etc details are:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Language: en-gb
Application Express 3.2.1.00.12
Any sugestions, help, etc would be much appreciated.
Thank you
Daniel

Hi everyone,
I have check everyone possible and I am unable to find the cause of the problem.
I decided to recreate an identical setup to the examples provided by Denes on his workspace and I still have the same issue.
I have change the wwv_flow_epg_include_modules.authorize to include Denes procedure as you can see below.
CREATE OR REPLACE function APEX_030200.wwv_flow_epg_include_mod_local( procedure_name in varchar2) return boolean is
begin
if upper(procedure_name) in ( 'my_image_display' ) then
return TRUE;
else
return FALSE;
end if;
end wwv_flow_epg_include_mod_local;
The only way I can get it to work is to change the function to RETURN TRUE before the IF statement.
Any suggestion and this stage may prevent my insanity from getting to silly levels.
Regards
Daniel

I am using Acrobat Reader 11.0.10 . I cant print mixed originals and also I cannot print letter size correctly . printing of first two pages ok but the rest gets cut off at the top

How can I print from MAC with Acrobat Reader. I can't seem to get it to print correctly , first two pages of letter size works ok after the remaining pages get moved up and the printing is cut off.

I arrived here looking for a solution! And while reading your post the penny dropped that I didn't have a serious problem. I have a booklet of 112 pages and all I needed to do was re-order the pages as printed so that 1 is followed by a sheet with 2 on the under-face but same side and so on. The pages had printed back to front and needed flipping. But then I have a duplex printer and maybe that makes a difference. Is it to do with your manual duplexing and the order that the second pass is presented to the printer. As my duplex sheets effectively needed flipping over each one I'm wondering if you can solve your problem with a little experimentation and re-ordering before your second pass.

WLST start managed server throws error but the server was successf. started

Hello,
I have a funny problem.
We are already using long time the WLST feature to startup managed servers via WLST connected to the Admin Console.
Normally when we start a managed server it looks WLST output like this:
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Successfully connected to Admin Server 'xxx_admin' that belongs to domain 'xxx_domain'.
Starting server xxx_001 .................................................................................
Disconnect from Admin server
This was working without any errors when inside your nodemanager.properties file the following is set:
StartScriptEnabled=false
Unfortunately I'm now forced to use:
StartScriptEnabled=true
and specified a custom "+StartScriptName+" (startWebLogicCustomScript.sh) as well.
What happen now is the following. WLST starts the script set at "StartScriptName" and once this script is finished (The script do not generate errors and returns return code 0) I get an error:
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Successfully connected to Admin Server 'xxx_admin' that belongs to domain 'xxx_domain'.
Starting server xxx_001 .................................................................................
Exception while starting server 'xxx_001'
No stack trace available.
This Exception occurred at Thu Mar 03 01:01:40 CET 2011.
weblogic.management.scripting.ScriptException: Error occured while performing start : Server with name xxx_001 failed to be started
at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)
at weblogic.management.scripting.LifeCycleHandler.startServer(LifeCycleHandler.java:502)
at weblogic.management.scripting.WLScriptContext.start(WLScriptContext.java:523)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
The funny thing now is that the managed server which WLST is given the error above is RUNNING so the everything is fine.
So in the Admin Console everything is shown running.
I don't would be normally worry about this since i can get around this with additional checks in my WLST script but what I'm worry about are the entries in the NodeManager log file which are generated (Especially the bold marked):
+<INFO> <xxx_domain> <xxx_001> <Starting WebLogic server with command line: <just removed>/domains/xxx_domain/startWebLogicCustomScript.sh >+
+<INFO> <xxx_domain> <xxx_001> <Working directory is '<just removed>/domains/xxx_domain'>+
+<INFO> <xxx_domain> <xxx_001> <Rotated server output log to "<just removed>/domains/xxx_domain/servers/xxx_001/logs/xxx_001.out00025">+
+<INFO> <xxx_domain> <xxx_001> <Server error log also redirected to server log>+
+<INFO> <xxx_domain> <xxx_001> <Server output log file is '<just removed>/domains/xxx_domain/servers/xxx_001/logs/xxx_001.out'>+
++<INFO> <xxx_domain> <xxx_001> <Server failed during startup so will not be restarted>++
+<WARNING> <Exception while starting server 'xxx_001'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Checking the server output log everything looks ok.
Does anyone have an idea why WLST / NodeManager is trowing errors here and how to solve this problem ?
Does maybe my custom script needs to return a special return code ?
WLS version used is 10.3.3.0.
Thx a lot.

Does nobody have an idea ?

Any page loads but the site content doesn't appear on main screen, only on tabs list.

I got an ARMv6 - Galaxy Spica (GT-I5700) mobile, with Android 2.3.7 on it. When I try to access any webpage its content, after loaded, is blank. Although I do visualise the site content on Tabs list or Top sites (first page) .
It happens even on Beta, Aurora or Nightly builds.
I did try to clean all data, but hasn't change anything.

bugzilla.mozilla.org

Another dvd player 70017 error - but the drive works fine???

Mac Mini early 2009 - 2.0ghz, 3gb ram, 10.6.2.
I am having a regular problem with the dvd player; I usually get the message "There was an initialization error. A valid video device could not be found for playback. Error 70017" when I start the program.
The DVD drive works wonderfully for reading, burning, etc. If I restart the computer the dvd player usually works for watching movies...if I use Toast, disk utility, or any other dvd related program, the player will now work again. I have tried the pacifist method to reinstall and have deleted every dvd player file I can find.... The same happens when I reset pram.
Any advice? Doesn't seem to be hardware, but I'd be glad to test that as well.
What's going on here? This is frustrating...I can use any number of other programs to watch movies, but it sure is nice to be able to use dvd player to see which title is playing, etc...plus I just want it to work - after all, isn't that the hook?
Thanks for any advice!

Two things, have you run the Hardware Test on your Install DVD? Have you tried resetting the Systems Management Controller?
Dah•veed

Images Broken Across Pages error but the largest image is 700 pixels

Similar Messages

Maybe you are looking for