Images captured showing in "All" instead of "captu...

Guys,
I have an N79. I recently formatted my phone and memory card. I had taken a full back up using Ovi Suite.
However when I restored the contents to the phone, the Images that I had captured and which were showing in "Captured" were not showing in the "Captured" section under photos. Neither was there anything in the "months" section. All the photos went to the "All" section. Is there any way I can restore the Images back to "captured"?
Any help would be apreciated.

I have the same problem. Also I could not back up the phone with Ovi Suite due to an internal error appearing on Ovi Suite's window when I attempted to back up (Seeing this thread made me happy because I was guessing that photos would be restored in an organized way in Months view correctly if I could back up the memory with Ovi Suite). So I connected the phone in "Mass memory" USB mode and copied all the data in a folder in my computer. After formatting the memory, I copied back all the images to the appropriate Images folder in the phone's mass memory. However, all the photos are now displayed only in "All" section. Newly captured photos go to Captured and Months views correctly but I am looking for a way to restore all my old photos taken by this phone organized in Months view. Please find a way and share it with us.

Similar Messages

Image Capture shows no devices (again)

Hi,
I have a MacBook Air (2012) running Mac OS X 10.9.1, 1.8GHz Intel Core i5, with 4GB ram.
I have a Cannon MP510, it shows up on the list of printers in the System Preferences.
I had a similar problem with the previous operating system (see https://discussions.apple.com/thread/5419672)
I now have a Time Capsule and I have tried connecting the printer to my laptop with USB and also via the Airport Time Capsule (both by USB).
The MP510 show up in Printers & Scanners but no Scan, and Image Capture shows no devices as being found.
I have looked at:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp510#DriversAndSoftware
But they have no drivers for 10.9.1 but I did try the driver for 10.8 again.
I have made sure that the printer is in Scan mode, I have tried Scan to PC, and Scan to PDF. (There isnt a Scan to Mac)
Any ideas on how I can get my MacBook to detect that the MP510 is also a scanner so that I can use image capture (or any other free software) to get scanned images on to my Mac?
Thanks,
Mulder

I have downloaded Cannon's MP Navigator and it says that it cannot communicate with the scanner, Scanner driver will be closed, and number 155.0.0

Want Image Capture to automatically open instead of iPhoto

When I upload photos from my camera, iPhoto automatically opens. How can I set up Image Capture as the default, instead?
Thanks.

That setting is in the Preferences for Image Capture.
Regards.

Image Capture creating zip files instead of regular files

I've been using Image Capture for many years. For some reason, all of a sudden, all my scans are being put into a zip file instead of as a regular file. I'd like to have Image Capture make regular files again such as pdf etc. What do I do?
Does this have anything to do with going to OS Yosemite 10.10?

Hi
appzapper & such are pretty flaky at removing things usefully, imo.
Use the uninstaller for speed download - http://www.yazsoft.com/products/speed-download/faqs/?how-to-un-install-speed-dow nload-properly
or get a hold of FindAnyFile or easyfind & search for Growl & Speeddownload & yazsoft - but from all I hear, the uninstaller works fine.
Failing that, Safari's settings plist file isn't in caches
Home/Library/Preferences/com.apple.safari.plist
is the place
& if you're still stuck, test & maybe download another browser using a New User Account.

Image Capture and Brother all in one printer...help!

Hello,
I have a Brother all-in-one printer MFC-420CN. I just upgraded from a PC to a Mac. Almost everything works perfectly...I can print (wirelessly or not), send faxes, and scan using Brother's own Control Center utility. However, I wanted to use the printer also with Image Capture. I downloaded the scanner driver from the Brother site, however when I start image capture I get the message "No Image Capture device connected". If I go to Devices => Browse Devices, I can actually see the printer driver shown as TWAIN Data Sources/Brother Twain, however it doesn't show as being connected. If I click on the "Use Twain UI" button, it brings up a Brother Twain window, but if I click Scan nothing happens. Does anyone know why the mac can see the driver but thinks it's disconnected? Also, under "kind" there's a swirly icon, but I don't know what it means (sorry, Apple newbie).
Thanks!
GC

Interestingly here is what I received from Brother. (Note that scanning using the Control Center works fine.):
Dear Brother Customer,
Thank you for taking the time to write to us.
Is your machine able to scan using the Brother ControlCenter software?
If you are able to scan with the ControlCenter, the drivers are
installed and working properly.
Your issue is with Apple's Image Capture software and should be referred
to them for support.
When you open the Apple software, you will need to click DEVICES in the
Menu Bar, then select the disclosure triangle next to TWAIN devices to
reveal the Brother TWAIN device.
Select the Brother TWAIN and click OK.
You should now be able to scan with Apple's Image Capture application.
For any additional assistance with the Apple application, we suggest you
contact Apple for assistance.
We hope this information will be useful to you. If we can be of further
assistance, please let us know.
Best Regards,
MFC Macintosh Support
Brother International, USA
Email: [email protected]
So, who owns the problem: Brother or Apple? If I go to the Apple Store I see Canon and HP scannners for sale but not Brother. Maybe that is part of the problem. Corporate relations between Brother and Apple.

Image Capture and Samsung All-in-One SCX4825FN Preview Delay

I am trying to scan using a Samsung SCX4825FN all-in-one printer, scanner and fax machine. It is installed using an ethernet cable via my internal network. Two Macs see and scan with it without a problem. The third used to, but since I tried installing Samsung's own scan software (just to see if there were any OCR capability in it, which there wasn't), each time I try to open up the flatbed scanning, it takes hours (literally) to do the preview scan, and in the meantime, the computer is almost unusable. The printer (scanner) appears to correctly do the preview scan, then do a more detailed scan (at very high resolution?), which takes it ages, and it uses this to build the preview scan.
Other computers haven't changed, so I assume it is the since Mac that needs fixing. It also doesn't happen with the multi-sheet feeder scan on any of the computers, so it is only the flat-bed scan that causes the problem.
I have tried fixing permissions, removing the Samsung software completely (I then couldn't see the scanner at all) then reinstalling the minimal amount, deleting permissions for Image Capture and for the Samsung Scanning software, changing preferences within the Samsung software, but all to no avail. It still takes a couple of hours to complete the initial preview scan on the one computer but not the others. Has anyone got any other ideas?
I would like to delete the Samsung software off the problem Mac and then copy over the required drivers from another computer to let it scan without a problem using the standard Snow Leopard install, but I am not sure which files to copy over. I am worried that the (not very good) Samsung installation software is taking off more files than it is supposed to when I remove it, but I am not sure what it is supposed to leave on there, or perhaps it is leaving too much on there.
The nice installation software from Samsung forces a restart each time you try and do anything, as well as insisting that no other software is running while it is trying to make changes, so I am already a little unhappy about what kind of changes it is trying to make since most Apple software is not that crazy...

Interestingly here is what I received from Brother. (Note that scanning using the Control Center works fine.):
Dear Brother Customer,
Thank you for taking the time to write to us.
Is your machine able to scan using the Brother ControlCenter software?
If you are able to scan with the ControlCenter, the drivers are
installed and working properly.
Your issue is with Apple's Image Capture software and should be referred
to them for support.
When you open the Apple software, you will need to click DEVICES in the
Menu Bar, then select the disclosure triangle next to TWAIN devices to
reveal the Brother TWAIN device.
Select the Brother TWAIN and click OK.
You should now be able to scan with Apple's Image Capture application.
For any additional assistance with the Apple application, we suggest you
contact Apple for assistance.
We hope this information will be useful to you. If we can be of further
assistance, please let us know.
Best Regards,
MFC Macintosh Support
Brother International, USA
Email: [email protected]
So, who owns the problem: Brother or Apple? If I go to the Apple Store I see Canon and HP scannners for sale but not Brother. Maybe that is part of the problem. Corporate relations between Brother and Apple.

"image capture extension" consuming all resources

Image Capture Extension is hogging all my ram... What is going on with that thing? I wiped and restored system last week, I have 16 gig ram and a 1 TB disk. I should have more then enough of everything. I noticed that for the last couple of days Image Capture seems to slow down my computer to a spinning beach ball every five seconds, which makes it almost impossible to work or/and type...
What does that extension do? Do I really need Image Capture as I have lightroom and photoshop... My computer has 200 gig stuff on it, and 700 gig and a bit free. I should not experience that spinning beach ball...
I wonder if this has to do with Yosemite... I installed that one last week after reformatting my whole computer...
Any insights? Are other people experiencing this problem??????
I first thought it had to do with Time machine but swapped that one off and I still have the spinning beach ball...
At this point in time Image Capture is not open and it still hogs 4.1 GB of my resources..., I checked in the memory pane of Activity monitor... Lightroom is a good second with 1.02 GB...

More info. The problem seems to be limited to one of the user accounts (mine). Launching iphoto from one of the other user accounts seems to work OK.
So I:
1) Gave one of the other accounts admin rights
2) Logged out, and logged back into the new admin account
3) Deleted my account- telling the OS to delete the directory
4) Re-created my account from scratch.
5) Logged out, and then logged back into my "new" account
(all my old settings, background, etc. were indeed gone)
6) Checked iphoto... it causes a runaway "image capture extension" again ?!?!

Image Capture Extension consuming all the memory

I have a Macbook Pro from 2011 with OS X Yosemite, Iphoto 9.6 and Aperture 3.6. I always work with Aperture for my pictures. But since last weekend it works extremely slow. When I check the Activity Monitor I see that there is something like "Image Capture Extension" consuming a lot of memory and also Kernel_task.
When I force quit "Image Capture Extension", Aperture starts up but still extremely slow. Is this a hardware issue? Should I reinstall Aperture?
I think this started after I tried to work in Iphoto again (after long time) to order a photobook before Aperture and Iphoto will close. I had issues with ordering the photobook (see other discussion of me).

Here is the report from EtherCheck, I have been able to remove some Adware via AdwareMedic but it seems there is still some there,
Also the startup items I cannot remove via Accounts.
For the rest everything looks quite OK, no?
EtreCheck version: 2.1.8 (121)
Report generated 11 March 2015 9:00:28 pm AEST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Adware! - Remove] links for help removing adware.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 574
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:3:29
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (32.07 GB free)
            Core Storage: disk0s2 319.21 GB Online
    OPTIARC DVD RW AD-5970H
USB Information: ℹ️
    Western Digital My Passport 0820 2 TB
        EFI (disk2s1) <not mounted> : 210 MB
        WD 2TB RED (disk2s2) /Volumes/WD 2TB RED : 2.00 TB (1.56 TB free)
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Adware: ℹ️
    Geneio [Adware! - Remove]
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.nike.sportwatch (1.0.0) [Click for support]
    [not loaded]    net.Thomson.iokit.USBLAN_usbpart (1.6.0) [Click for support]
Startup Items: ℹ️
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    HWPortDetect: Path: /Library/StartupItems/HWPortDetect
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
    [loaded]    net.sourceforge.MonolingualHelper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    None
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Unity Web Player: Version: UnityPlayer version 4.6.0f2 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 6.0 [Click for support]
    googletalkbrowserplugin: Version: 2.0.4.2108 - SDK 10.5 [Click for support]
    npgtpo3dautoplugin: Version: 0.1.43.7 [Click for support]
    Silverlight: Version: 4.0.60310.0 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    GoPro [Click for support]
    Growl [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 286.77 GB
    Destinations:
        WD Harddrive Ann [Local]
        Total size: 499.94 GB
        Total number of backups: 2
        Oldest backup: 2014-11-30 04:03:53 +0000
        Last backup: 2015-03-03 15:01:32 +0000
        Size of backup disk: Too small
            Backup size 499.94 GB < (Disk used 286.77 GB X 3)
Top Processes by CPU: ℹ️
         9%    mds
         6%    WindowServer
         4%    mds_stores
         1%    mtmd
         0%    SystemUIServer
Top Processes by Memory: ℹ️
    159 MB    mds_stores
    69 MB    ocspd
    60 MB    WindowServer
    43 MB    Dock
    30 MB    Finder
Virtual Memory Information: ℹ️
    1.68 GB    Free RAM
    1.20 GB    Active RAM
    384 MB    Inactive RAM
    1.03 GB    Wired RAM
    948 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 11, 2015, 08:55:40 PM    Self test - passed
    Mar 11, 2015, 05:13:17 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/iPhoto_2015-03-11-171317_[reda cted].crash

Image not showing but all metadata and files are in place

Using Aperture 2.1.4 and getting ready to upgrade to 3.1. I am finding that in several of my projects Aperture is not displaying some images. I get the famous dotted line and grayed out image. The metadata is in place and when I check the contents of the AP library everything seems to be in place.
Now this is happening to images that have received editing but nothing outside of AP only local adjustments. I tried re-building the library but nothing changed. I've considered re-importing the images and deleting the grayed out versions only this can be really time consuming as there are 13,000 files in my library. Not to mention all the work I have into the adjustments would be lost.
Has anyone else come across something like this? I tried searching the topic to no avail.
Thanks!

Hello Christopher.
As you have discovered, the short user name for a user cannot be changed.
If you want to use a different short user name, you must create a new user (this requires administrator privileges). You can then move items from your previous home folder to your new home folder if you wish.
Check About the home folder's name and My home folder and desktop are different than before to correct it.

Dynamic Images not showing at all

Hello there,
I need some help.
I have a mySQL database with some images and txt. I use
"Export Recordset As XML" (from Developer Toolbox).
to run the txt through a Spry Data Table and the images to
the Spry Detail Region. The problem is that the images won't show
in the Detail Region when I click at the table. The description
shows and changes as I click the table so the setup 'works'. I use
a Image Placeholder in the Detail Region bind to the appropriate
Recordset. I've uploaded a test table with images and txt from a
online Dreamweaver tutorial so the mySQL table should be ok. At
least the file names are showing in the table when checking in
phpMyAdmin, though I can't see them. Only as a file name. And yes,
I'm a newbie..
Any idea what I'm missing out on here?
Any help appreciated.
Cheers

moved to BOE forums

Why does image capture show my phone twice

Its almost as if an older version of the phone with less number of pictures on the camera roll, appears under the correct one. The itunes shows the one with the 14 items.
I've never seen this before until the newest update a few days ago.

Look it shows this in iphoto too!

Apple's Image Capture deleted all my iPhone Videos

I found out that because I have been using Image Capture to import all my pictures and videos from my 3GS to Aperture 3, with the setting "delete after finishing import" I have actually LOST ALL THE VIDEOS I took in the last months. Including those of family I only get to see once a year.
What happens is that it does NOT import the Video to Aperture 3, yet deletes it from my iPhone.
Is there any way I can recover these lost pictures? And how can a bug this serious still be around? This is AWFUL!
I have tried this: http://tech.kateva.org/2010/03/image-capture-import-to-aperture.html (the private/tmp folder). I also thought of restoring my iPhone to the date I still had the video's in my Camera roll, but sadly I did not connect my Time Machine drive to my Mac in those days so no iPhone backups are available.
Please help if you can, it would make me so happy to find back these videos.

I don't post alot on these forums but when I went searching for a solution to this problem and found this, I felt compelled.
I, too, tried to use Image Capture to import into Aperture 3 after migrating from iPhoto. I used IC because it offers the very handing "Delete After Import" feature that Aperture does not. After my first import, and selecting that delete option, I closed Aperture without verifying the import. The second import session I did look to verify and discovered an empty project called Imported Project and Imported Project(1). I tried to search the entire Aperture Library, but all photos and videos of my child from those two import sessions are gone. Poof.
Apple products have had some bugs in the past, but this is the first that causes loss of important data.

HT201302 So I used Image Capture which showed my iPad blacked out and no content. What can I do?

Image Capture shows my printer iconw on the left top and also a blacked ou Ipad icon. However there is no content shown when clicking the iPad icon. The page remains blanck. What has happened?

your data files should be ok.
go ahead and download and reinstall.
Downloads available:
Suite: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Image Capture and Preview "folder not writable" error importing to shared folder

I'm running 10.8.5 on a Late 2012 model Mac Mini. I'm trying to create a folder under my home directory where my wife can import pictures using Image Capture or Preview while logged into her account. I've tried setting permissions on the folder by setting POSIX permissions and ACLs from the command line, and also by setting ACLs using Get Info in Finder, but it seems as though both Image Capture and Preview ignore the ACLs and instead rely solely on the POSIX permissions for everyone/other (even when a relevant group is set). Unless the POSIX permissions for everyone/other are "rwx" Image Capture and Preview both give an error that the import failed, and /var/log/system.log shows errors that the "folder is not writable". I'd like to be able to set this up without making the folder and the files in it writable by everyone. My understanding was that ACLs should take precedence over POSIX permissions, but even the POSIX permissions don't seem to be getting handled properly, because the group is ignored. Any help or explanation of what's happening would be appreciated.
Here's an example with details:
Suppose we have the users alice and bob. We want to set permissions on the directory /Users/bob/importdir such that Alice can import files from a camera there using Image Capture (or Preview, either would do), but don't want to relax the permissions more than necessary.
We create a group named bob_and_alice
We set the following permissions on /Users/bob:
POSIX: rwxr-xr-x, owner=bob, group=staff (i.e. default POSIX permissions)
ACLs:
0: group:everyone deny delete
1: group:bob_and_alice allow list,search,readattr,readextattr,readsecurity
2: user:alice allow list,search,readattr,readextattr,readsecurity
"Get Info" shows "Read & Write" for bob and "Read Only" for alice, bob_and_alice, staff, and everyone
We set the following permissions on /Users/bob/importdir:
POSIX: rwxrwxr-x owner=bob, group=bob_and_alice
ACLS: (these are already probably more permissive than should be necessary)
0: group:bob_and_alice allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,re adextattr,writeextattr,readsecurity,writesecurity,file_inherit,directory_inherit
1: user:alice allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,re adextattr,writeextattr,readsecurity,writesecurity,file_inherit,directory_inherit
"Get Info" shows "Custom" for both alice and bob_and_alice, "Read & Write" for bob, and "Read Only" for everyone
Alice opens a Terminal and cd's to /Users/bob/importdir. Alice can create and delete files in this directory.
Now Alice opens Image Capture and with our camera connected we try to import a photo to /Users/bob/importdir. Image Capture shows an error dialog with the text "Import error. An error occurred while importing. The item 'foo.jpg' was not imported." /var/log/system.log shows the message: "Jul 20 22:12:34 computer_name.local Image Capture[32804]: Document destination folder is not writable" If instead Alice uses Preview it shows an error dialog with the text "The selected folder is not writable" and /var/log/system.log shows two error messages:
Jul 20 22:23:45 computer_name.local Preview[33280]: Document destination folder is not writable
Jul 20 22:23:45 computer_name.local Preview[33280]: Encountered error during image import: Error Domain=com.apple.ImageCaptureCore Code=-9934 "The selected folder is not writable" UserInfo=0x7ffda4881f00 {NSLocalizedDescription=The selected folder is not writable}
Now we change the POSIX permissions on /Users/bob/importdir to: rwxrwxrwx
The import succeeds with both Image Capture and Preview
Can anyone explain what's going on here? Is there another reasonable way to do this without, moving this shared directory to /Users/shared?

Did you figure out how to fix this?

IPhone 4 not recognized by Image Capture

help! so i'm trying to transfer photos i've taken with my iphone to my mac. when i open image capture, the iphone doesn't pop up as a recognizable device. tried to google the issue and to no avail... any help is appreciated! thanks

I had the same issue and when I searched for a solution, all I found was your question. So I messed around a bit and got it working.
I'm no computer engineer, so I did about 3 things at once rather than 1 at a time. Thus, I don't know if it was one step or a series of steps that got things working again so I'll tell you what I did and you can take it from there.
I had the iphone 4 connected with the cable. I had image capture running. It listed the proper number of images but I couldn't see the thumbnails and when I downloaded all, the newest ones didn't download.
In image capture, I went to the devices menu and clicked "browse devices" and unchecked iphone. Then I did a hard reset of the iphone by pressing the home and power button at the same time until the apple logo appeared. Image capture said no devices were connected. After the reboot (while still plugged into the USB), image capture showed my phone and all the thumbnails correctly.
I'm guessing it was just the reboot that did the trick.
good luck.

Images captured showing in "All" instead of "captu...

Similar Messages

Maybe you are looking for