Images change position and dimension after client edits on admin console!

Hi,
1. After my client uploaded his images onto the site using the admin console they changed position slightly and did not fit exactually into the image frames i had set when i first made the site.
2. When i opened the site on muse and merged changes the images positions and dimensions changed even more than what was being diplayed on the live site? (E.g I originally had two columns of square thumbnails for some slideshows and now i have a single column of rectangle images)
3. I republished to see what would happen it now displays the way it was diplaying in Muse. The site is: www.jacobbuckland.co.uk
My understanding was that when i create an image frame or gallery in muse that any image uploaded via the admin console should fill that frame no matter what the size or dimensions of that image?
Any help gratfully received. Thanks

Our technical team managed to find the immediate cause for the problem, and a solution.
According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
Where <APPLICATION> is the name of the problematic cube.
After that everything is working.

Similar Messages

Image constantly reloading and freezing after external editing

After going through the following steps:
Select an image in LR3
Edit in an external application - doesn't seem to matter which one
Select "Edit Original"
Save and Exit external application
Return to LR,
Any further edits - crop, noise reduction, brush stroke, doesn't matter what, triggers LR to convulse.
By that I mean, if I attempt to apply a crop, the image blinks, zooms in, and you see the word "Loading" appear. In other actions, it just blinks, the sliders freeze, "Loading" appears, and after a few seconds, it releases. Then a few seconds later, it goes through the cycle again.
Only by exiting LR and reopeing it can I continue to work on the image without constant interruptions like the above. I know that in Develop mode, the program has to load the adjustments but why is that they don't occur with nearly the same frequency if you exit and reenter LR.
Is this bug in the program?

Try the following:
In Edit > Catalog Settings in the Metadata Tab uncheck "Automatically write changes into XMP".
If you want to save your changes into XMP do it manually via Ctrl/Cmd + S or via Metadata > Save Metadata to File.
WW

Image changes brightness and contrast after importing. LR 5.3

I'm importing RAW files straight from a CF card reader into my network storage drive via LR5.3. While reviewing as it imports initially each image looks great but a few seconds after it loads onto the screen it seems like LR applies a bit of extra brightness and lessens the contrast and I lose a load of detail that was there originally. I've not touched the import settings and no filters are being applied by myself on import.
Thanks in advance.

Andrew Rodney wrote:
the initial prevew you see is wrong ... LR is showing you the correct preview ...
I think I know what you're trying to say there Andrew, but to attempt a clarification for the OP (and other readers):
* Lr's rendering may be considered "correct" in Lightroom because it's, well, Lightroom's rendering.
Given the terminology posed by Andrew, in a Nikon software environment, Lightroom's rendering would be considered wrong, and Nikon's correct. And such is the perspective that many people bring to Lr - that Nikon's rendering should be considered "correct", and Lr's rendering should "match", and to the extent that it doesn't, it's "wrong"...
The bottom line (from my perspective):
Since Lr's rendering ignores camera settings (as manufacturer's rendering ignores Lightroom settings), one needs to learn to (set up defaults and) apply Lightroom settings to have the Lightroom rendering how they want..
Cheers,
Rob

Impact of changing positions and Org Unit short text

Hi All..
This is regarding the impact of changing positions and Org Unit short text(SAP name - Object Abbreviation, technical field u2013 hrp1000-short).The new approach we are ging to have is to keep short text same across the business unit.
Example:
All position in US will have short text u2013 USS
Similarly All US Org Unit short text will be COMUS
I was wondering, from SAP best practices point of view, do you see any downside in this approach?
Example: Any problem in searching position or org using search term.
Please pin your thoughts...
Thanks,
Kumar

Hi,
Normally such change will not have any impact in PA module.
Only in exceptional cases it will have an impact in following cases:
1. First and mandatory condition that you use abbreviation as position name in IT 0001. If this is the case parameter PLOGI TEXTC (in table T77S0) should be equal X.
2. Second condition is that parameter PLOGI SPLIT is equal to X. That means that change of object name will lead to record split in IT 0001 in PA.
So if in table T77S0 you don't have setting PLOGI TEXTC = X and PLOGI SPLIT = X you can go ahead with change of positions abbreviations. It will have no impact on other modules.
Cheers!

Creating that blur using my brush my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area

Creating that blur using my brush. When I paint the area, which highlights in red, I bring the clarity down to create more of that blur but what ends up happening is that my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area I am painted by automatically becoming over exposed. Does anyone else have this problem that can help me?

Quote
Do you think I should try to find a cheap mobo to OC my current CPU? How about trying to find one (mobo) used? I fear that my only realistic choice will be to scrap the CPU and eventually buy a new mobo and CPU, but as the CPU was only released just under two years ago I would value being over to overclock it with a cheap enough mobo to last me another year or so.
Who knows what additional problems may be run into by switching mainboards & such. The OS would have to be reinstalled fresh, etc. Money wise, it wouldn't make a lot of sense to invest more into a system that is rather outdated. The small performance gain making the switch to another board using the CPU you have, just doesn't really make much sense, especially if what you have now is completing the tasks asked of it. Save up some money, set it aside for a future build. There are plenty of new platforms in the works.

Editing in admin console in BC

If a published page on a Muse site is NOT part of the menus can it be edited by a client through the admin console in BC?

I see. What you are trying to do is possible, but a bit incovenient and fragile.
The client can edit any page by manually typing in the URL expected by the in-browser editor. For a page at http://www.domain.com/folder/page.html, the in-browser editor expects http:///www.domain.com/AdminConsoleXT/icecube/folder/page.html.
Note that this may change in the future (hence the aforementioned fragility of this approach).
Also keep in mind that the In-Browser editor does not let you add images, only replace them, so you will need to have enough placeholder images in the first place.
Abhishek

Change title and category after published

I published an iBook.Days after I was able to upload modified content with ITunes Connect, but I can not change Title and Category of the iBook. I uploaded the new contents changing the title and category but new text is on line, title and category are always the same. There is a way to do this?

On Fri, 4 Apr 2008 06:21:15 +0000 (UTC), "mFlexDev"
<[email protected]> wrote:
> I have published a fla file in exe format .
> how can i change the title and image of this exe?
I beleave the easiest way is to use PEResourceExplorer,
Resource
Hacker or similar software to modify EXE resources, such as
window
title and window icon.

Problem with filters not finding an image in LR 4.0 after being edited in Photoshop CS6 beta

I am running Lightroom 4.0 on a Win7 Professional 64-bit system. I have come up with a strange problem I can describe but don't know how it can more generally be duplicated, unless this is a Photoshop CS6 beta bug.
I am looking through in Library module at a shoot. When I filter by a keyword that some of the pictures have, a recently edited image does not show up. Here is what I mean; let X=IMG_6260:
1) For X.CR2, edit in Photoshop CS5. All works well - X-ed.tif gets created and added to my LR previous import set.
2) Clicking on X-ed.tif, edit in Photoshop CS6 beta. All seems fine - X-ed-2.tif gets created and added to my LR previous import set.
3) The keywords on all three images - the original and the two edits - are the same. I can confirm that by, in grid view, selecting these three and noting no asterisks in the composite keyword view. One of the keywords is the person's name - let's say it is "Sara".
4) Now, when I click in the keyword list on "Sara", all images in this most recently imported set show up with her *except* X-ed-2.tif - the one created by CS6 beta.
Strange! Should this be reported in a CS6 forum? Thanks.

Yep, it returns nothing. Debug output seems to be largely irrelevant except this oddity:
-- Debug: Received Message:
-------------------------- BEGIN NETLINK MESSAGE ---------------------------
[NETLINK HEADER] 16 octets
.nlmsg_len = 36
.type = 2 <ERROR>
.flags = 0 <>
.seq = 1421583995
.port = 1853883468
[ERRORMSG] 20 octets
.error = 0 "Success"
[ORIGINAL MESSAGE] 16 octets
.nlmsg_len = 16
.type = 16 <0x10>
.flags = 5 <REQUEST,ACK>
.seq = 1421583995
.port = 1853883468
--------------------------- END NETLINK MESSAGE ---------------------------
Message type = "error" with a message = "success"? Not sure if this is normal or not

My new Nokia Lumia 800 changes date and time after...

When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

chrysale wrote:
I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

Program to change pa0002 and pa0006 after production copy

Hello Pls can some one give me code to change the info type pa0002 and pa0006 after system copy.
Regards
Meghana

Hi Meghana,
Can you elaborate about this requirement?
You can access PA0002 and PA0006 using SE16 but what do you need to change?
Arti

Trouble change ringtone and alert after update

i can't change ringtone n alert after update firmware with my e5, tell me please if you have solution

Can you provide more details..like how exactly you are trying.. ? Any error message ?

Any config.xml fields not viewable/editable in admin console?

While reading through the WL 10.3 docs, I discovered something very unexpected. There are some attributes that you can define in the config.xml that are not viewable or editable in the admin console. I found this in the "Programming WebLogic JTA" manual. The attributes in question are "MaxResourceUnavailableMillis", "MaxResourceRequestOnServer", and "MaxXACallMillis" in the JTA section.
Is this unique? Are there other elements or attributes that can only be viewed or set in the config.xml, and not in the admin console?

Hi Arulazi,
Adding to Michael Wooten's post, the change you make (via the Tools ->
Preferences -> Path -> Port) only changes the port number to which Workshop
connects to. This will be used when you want the same IDE to connect to
different workshop enabled WebLogic Servers.
This change will not be reflected in the config.xml file.
The information will be updated in the .workshop file found in the
C:\Documents and Settings\username directory.
If you want to change the listen port for the server you will have to edit
it via the server console at http://localhost:7001/console
Hope this helps.
Thanks
Raj Alagumalai
WebLogic Workshop Support
,"Michael Wooten" <[email protected]> wrote in message
news:[email protected]..
>
Hi Arulazi,
I think this is just you assuming that changing the information in thatdialog
box, effects the config.xml of the WebLogic Server instance Workshop itsusing
I don't think it does anything to the config.xml. It only tells Workshopwhich
WebLogic Server instance you want it to use.
Again, unless you've actually seen some documentation that states thatperforming
the operation you mentioned changes the config.xml, I think the behavioryou are
currently getting is the way it is supposed to be :-)
Regards,
Mike Wooten
"Arulazi D" <[email protected]> wrote:
Hi,
When I try to update the server port number in the Weblogic Workshop
console (via
Tools -> Preferences -> Path -> Port), I was unsuccessful in achieving
that. I
changed port number from 7001 to 7010. This doesn't modify the
config.xml.
When
I start the samples server, it tries to start the server in the same
port (i.e.,
7001) causing bind exception. Is this something to do with configuration
file
not being updated. Am I getting wrong somewhere?
Any thoughts on this?
Thanks,
Arul

How to fix acrobat 9.4.1 NOT to change position of objects after editing in Illustrator?

Everyday I use the editing capabilities of Acrobat, with the ''Touchup Object Tool''. With objects, it opens in Illustrator, it's fantastic what you can do. A few days ago, I let Apple upgrade my OS from 10.6.4 to 10.6.5 (in fact, it is the second workstation at my work place, that's having the same problem). The problem is the following... When editing an object with that tool, saving back into the PDF file forces the position of that object to change, it shifts about half of an inch to the right and above. I don't see how I can fix this. Anybody has a solution?

no bug - most likely it is user error but only you know what has gone on
In anycase there have been virtually no reports of this - it is extremely unlikely to be a bug - and virtually zero chance that Apple will be fixing your problem
LN

Changing Thumbnails and Color after re-opening LR

Why does LR change each visible thumbnail along the bottom of the screen after, importing, then again after reopening of the program. Color Temp is set to "As Shot" but yet LR makes it a much cooler image thus changing the colors.
Has anyone else experienced this??

On a Mac, if you are not using a hardware calibrator, set the monitor profile to the default Color LCD, or do a "by-eye" calibration. Ian put up instructions for that here: http://computer-darkroom.com/colorsync-display/colorsync_1.htm . Contrary to windows machines, monitor profiles do not go bad on macs. You really really really should be calibrating using hardware however. Decent ones can be had for less than $100. To answer your original question. The color shift you are seeing initially is the subject of about 25% of the posts on this forum. What happens is that initially you see the embedded jpeg preview from your camera and after a short while, Lightroom replaces that with its own direct rendering from the RAW data. They simply represent different interpretations of what the camera sees. Usually the jpeg rendering done by the camera is more saturated and warmer than what Lightroom does in its default, rather boring rendering. Usually you have to work a little to get a great rendering out of Lightroom but you have amazing latitude. You don't have the latitude to do much with the jpeg from the camera anymore.

How can i change date and time after importing a file

hello
i'm importing AVI files first in iMovie because Final doesn't support (other question i put in) but when i see the scenes form 1993 they have the date 2004.
i believe 2004 is the date i put them on the computer.
Now i looked in the help files Final Cut Pro but cant find anything to adjust the date and time.
it works well in iMovie using the help files:
Right-click the clip you wish to edit and click Adjust Clip Date and Time from the menu that appears. Or click on Archive and than adjust date and time
But as i said i cant import the files in FCP have to import them to iMovie files adjust the date and than import to Final Cut Pro but than de changes i made to the date and time are gone and in FCP 2004 is again the date of the file!!!
Question how can i Change in Final Cut Pro the date and time in a same way as iMovie does?
Jemajoro

OK, I think I understand what you are saying but it still does not look like it is doing it as you describe.
Here is another screen shot.
Note that all clips in "2007 August" event have the date of Aug x, 2007.
Yet, the event "2007 August" still shows up under the 2012 "folder" (is that the right terminology?).
The newest clip in this event is Aug 31, 2007 so shouldn't it be categorized as 2007 and not 2012?
I think you know this but I am using the following feature:
Go to the sprocket icon under the events.
Select "Group events by date" and then by "group events by year and month"
Thanks again for all the help

Images change position and dimension after client edits on admin console!

Similar Messages

Maybe you are looking for