Images come up with crop mode 'marching ants'
If I open an image or switch between images (Ctrl/Tab) and the crop mode tool is current (not active, just the one that's currently showing on toolbar), then the image shows the 'marching ants' and I have to press Esc to get rid of them.
It starts getting annoying if I have several images open, every time I switch, I get the 'marching ants' even though I havn't said I want to crop.
Is there any way of disabling this behaviour, never used to happen on CS5.
Cheers,
Bernie
The poroblem is that the crop tool is active even if though I havn't used!
For example, let's say I have several images just opened and the current tool was the Crop tool, but I havn't used it. When I open a new image, the crop tool becomes active with the crop area showing. If I Ctrl / Tab to the other images each one wil now show the active Crop area, even though I havn't actually used the crop tool.
I've discovered that I can use the crop settings to switch back to 'Classic' mode, and that doesn't exhibit the problem, so I'll stick with that (the 'Classic' mode seems more intuitive anyway).
Thanks for your reply though.
Similar Messages
-
My manipulated images come out with a green color cast and poor quality
I manage my photos with ACDSee, but use Photoshop CS3 for much of my editing. The image leaves ACDSee with rich true colors, and while I'm editing in Photoshop the image looks like I want it. But when I save the image and view it in ACDSee, it now is faded, has a green color cast and looks faded, dull and shallow. What do you think is happening? Thanks. Rickrans
One other place to look.... If you shoot raw images, there's a separate configuration for the color space the Camera Raw converter delivers its results in. Click the little link at the bottom-center of the Camera Raw dialog. If you want to work in the sRGB color space, change it as shown here:
-Noel -
My iPhone 4s keeps restrating after upgrading to iOS 7.1.2 and comes up with recovery mode.
My iPhone 4s keeps restrating after upgrading to iOS 7.1.2. I tried to restore for few times using iTunes and installed only 8 apps freshly from iTunes apps store. After restating the phone goes to recover mode every time. Last time it came up with a diagnostic massage with a big apple logo saying..'we are hanging there'. I am really frustrated with Apple coz my last mobile 3GS's network circuit was so poor that I could not use that to make call. However can any one help me with my iPhone 4s problem? I've no warranty left that's why I think apple will not help me any ways.
Try changing the channel on your router to manually select & use,the highest number channel available. After I did that I no longer had the problem.
-
Imported image comes small and with a low resolution when trying to fill text
I am trying to fill my text with a texture or image.
Heres my process:
I type my text, select it and click on the "draw inside" button.
I then go to place and select my image.
The image comes tiny with dimensions of x- 430mm and y-340mm.
Obviously when i stretch it out to cover the text, the image becomes blurry.
Whats happening here?
Thanksherms,
What happens if you start with (File>Place) the image/texture, then have the live/outlined Type on top, select both and Object>Clipping Mask>Make (if you have outlined Type, select all of it and Object>Compound Path>Make first)? -
Is there a way to use a single bitmapdata for multiple images with GPU mode?
With GPU mode is there a way to bring in a single 1024 X 1024 png containing all my sprites and then slice it up into multiple display objects all refering to the original BitmapData?
I have an app that runs in GPU mode - but I want to optimize the image management.
I am making three sets of images in the orders of 2048, 1024 and 512 px.
The app is a book app and each page has around 4 to 5 bitmaps. I would like to bring in one single image and slice it up - but just refer to the original bitMapData in the memory.
Is there a way to do this - e.g. using a masking technique?
I think it is possible using textures in direct mode - but that is not an ideal solution for me - as the app is already in the appstore - and I would have to entirely refactor it for stage3D. Also I use very large bitmaps which have some masking animations applied to them dynamically: http://youtu.be/Nm0T1jLCTz8?t=42s
Currently, I use jpgs and a jpeg mask file for each image which I composite to get the alpha - then I scale them.
PNGs may be better for GPU - (no compositing) but they make for a huge app file.
Now I am converting it to use diffent sized assets depending on the device, then scaling them if need, and then compositing them for apha. What I was hoping was to find a technique that could reduce the number of bitmapdata objects used and reduce the operations in general.
Any thoughts on optimizing would be appreciated. I can add my code here if it helps.Tell Apple:
http://www.apple.com/feedback/iphone.html
We're all users here, just like you. -
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts. -
I was halfway updating my phone to iOs7 when it froze halfway through where it shows the apple symbol. So I turned it off and now it says that I have to connect to iTunes. So I did and it said it was in the recovery mode and should be restored. I restored it and then it come up with a message that says "iPhone cannot be restored. An unknown error occured (3194) What can i do to fix it? Please!
vTanny wrote:
..."iPhone cannot be restored. An unknown error occured (3194)
Please see the More Like This section on the right. -
Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
Many thanks
AnthonyTry this Discussion...
https://discussions.apple.com/message/18783684#18783684 -
Layered image with blending mode won't display properly in Indesign CS3
Hello,
I'm having trouble placing a layered psd and/or tiff with blending modes into my indesign cs3 document. Basically I have a flattened image with a shadow on a white background. I've had to doctor the image a bit in photoshop and I've used the multiply blending mode to remove the white background. (I'm trying to get around having to clip the image and having to recreate the shadow). Anyone know how I can drop my layered image into indesign and have it keep the blending modes I've applied in photoshop?
Any help would be much appreciated.I'll try and do my best to describe what it is I'm doing.
I've started out with a “flat” image of a product on a white background with a shadow on it. I need to make the background transparent and so that all I’m left with is the product with the shadow on a transparent background.I want to be able to place this image over another image in indesign and have the background remain transparent.
On the first layer I have a clipped out version of the product with no background (All by itself with no background or shadow). On the second layer I have the original “flat” image with the shadow and white background. On this layer I’ve used the multiply blending mode to remove the white background.
Now that I have the product on one layer by itself and the product and shadow on layer two with the multiply blending mode I have an image of the product with a shadow with no background. When I place this into indesign, my image shows up with the white background as if the multiply blending mode isn’t applied.
I’ve tried this on other images. It doesn’t appear that it lets you bring an image over with that blending mode. It's like I'd have to bring over a clipped image and then place that on top of my original image with a blending mode placed on it "in" Indesign.
Hope that make sense? -
I have been using Photoshop since version 2.5 when it came on 16 floppy disks. In all of the versions I've purchased over the years (many) up to CS3, I have always been able to use CTRL+H (Windows) or CMD+H (Mac) to hide the "marching ants" selection outline. This is immensely useful when making all sorts of adjustments where the edge of the selection must be viewed while "fiddling with the knobs" (so to speak). Without being able to hide the selection boundaries ("marching ants"), I often have to make a best guess, undo the selection, get bummed that the edge isn't what I want, then have to undo, reselect, try again... over and over. This is such a SIMPLE feature, but the lack of it is driving me crazy. I searched HELP, but it didn't live up to the promise. If there is a way to hide the marching ants, where is the menu item, and what is the shortcut?
You can assign Ctrl/Cmd H to hide Selection Edges (Edit > Keyboard Shortcuts) only, if you don't want to hide everything, but you will be warned if some other function has the shortcut.
-
Whenever I select something, for example, I cannot see the marching ants selection until I either scroll up or down or zoom in or out. This occurs whenever I paste an image as well--nothing shows on screen until I scroll up or down or zoom in or out. Why is this?
Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long. -
Slideshow gallery - images come in cropped
My images keep coming in cropped when I import them into a slideshow gallery. How can I avoid this?
Even when I edited the mask by using the "edit mask" slider, I wasn't able to get the entire image into view. These images were coming in from Illustrator, with transparent backgrounds. When I added a plain white box behind each image, I was able to pull the entire image in without the cropping effect. Still, I'd like to be able to get images into the widget without having to do this extra step!
-
Please can someone help me.
When i try to work on any file in either PS or nik software the following thing happen
1) I notive the image file comes up with the reprosses message
2) I reprocess and then then try to edit file in PS or NIK and get the following
or
I read a group discussion which suggested repairing the library (middle Button) and rebout but the results were the same. Can someone please help, I am not that techie (over 65) so could I ask that any suggestion are very clear and assume that I know very little. Regards MarkI had my previous note all organised with screen grabs of the three messages I wwas talking about but the have not appeared in my post!
1) reprosses message asking to reprosses file
2)audio/video(adjustments disabled) this showed up in the adjustemnt window.
3editing error sayinh "this image cannot be rendered for editing because aperture does not support the image format"
Sorry that my screen grabs didnt work -
Verizon Iphone 4 without sim card is locked because of forgotten passcode. Can't access serial number because of having no sim tray. Never synced with itunes. Recovery mode always comes up with an error. are there any solutions on resetting the phone?
Are you looking for the serial number or the IMEI? If the phone was active on your Verizon acount, Verizon can give you the IMEI.
Maybe you are looking for
-
Can i play my itunes library which is on my mac on another device, windows pc?
Can i play my itunes library, which is stored om my macbook pro, on another device, asus notebook?
-
How do you get the bookmarks list permanently displayed on the left side of the screen?
I somehow managed to get the bookmarks permanently open and displayed in a vertical column on the left side of the screen. I accidentally closed it and cannot get it to display again. How do you manage to get the bookmark list permanently open and di
-
Sync adds and deletes same entries
I have two computers and an iPhone all syncinc to the same mobile me account. On one of the computers, I will periodically get the "Syncing with MobileMe will change more than 25% of your calendars" popup. It wants to add 120 new entries and delete 1
-
How do I change font inside the Form's text fields
I went through tutorials on lynda.com and succesfuly layed out my form. However I can not figure out how to make a change from a default Times Roman in the forms fields to a different typeface. I assigned object styles, followed by paragraph styles b
-
Invalid Keycodes on primary keys (Robot)
I have a Robot that is working quite well until I needed to use the '[' and ']' characters : robot.keyPress(KeyEvent.VK_OPEN_BRACKET); Which generates invalid keycode exeptions. I undestand the need to press and release shift for non-primary keys (eg