Images dont appear in view mode

help
I upgraded and now when I browse thru the images they are just blank squares
I double click on one and the photo does open the image and the image is there, but I cant view it the libriary mode. SOme of the images are there and they show up fine, but many just have a blank image where the picture should be....
Anybody got any idea's ???

pishnar:
Welcome to the Apple Discussions. There are a couple of things you can try. One is to manually set the permissions and ownership on the iPhoto library folder and contents as follows:
Setting Permissions for iPhoto Library Folder
1 - Select the iPhoto Library folder and type Command-I.
2 - When the Info window comes up go to the Ownership and Permissions section and make sure You have Read & Write permission and that the Owner and Group have Read & Write also. Others - Read Only.
3 - Then click on the "Apply to enclosed items..." button.
Another is to find one of the photos in the Originals folder that won't open in iPhoto and copy to the desktop. Then open with Preview and do a Save As, selecting the same format, max. quality and same location, replacing the file you opened. Then replace the "bad" file with the converted one. If that works you can use a program like freePhotoConverterto convert each folder of your library that has a bad file to the same name jpg, size=original and quality=max. The files get created in a folder titled "Converted Photos" located in your User/Library/Preferences folder. I couldn't get it to save anywhere else so I made an alias of the folder on the desktop for easy access.
If you select lossless for the Quality you'll increase the file size considerably. My 1.7MB file went to 3.3MB. The max setting gave me the same size.
Then replace the original files in the roll folder within the Original folder with the converted files. Do one file with the application first to make sure it works. I hope this has been of some help.

Similar Messages

  • Images dont appear

    I recently installed Norton AntiVirus. And since then I've noticed that the images in any web browser dont appear. Some will but not all. For example the yahoo page will not finish loading or I will get question marks. If i am looking at images on a news site they fail to load. Is this a plug-in issue? Do I need to reinstall certain plug-ins? I uninstalled NAV but nothing changed.

    i tried doing some of the suggestions i found in the forums...using a different broswer and such but they did not seem to help. firefox or netscape have the problem too

  • Image Not Appearing in Display Mode

    I have just upgrade to DW8 from DW 2004. After starting DW8,
    I realise the images on my webpages are not showing in the Display
    Mode of DW8 but I can still see the images in DW 2004. All the
    settings are properly brought from DW2004 to DW8 but the images are
    still just showing as general images instead of the actual images.
    Is there any settings I am missing?
    Below is an example of my image code.
    <img src="/eSCM/Images/Buttons/Submit.gif" alt="Submit"
    width="55" height="20" onClick="Submit();">

    Yeah - I like it alot!
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    ".: Nadia :. *ACE*"
    <[email protected]> wrote in
    message news:[email protected]...
    > That's the one !!
    >
    > I wanna have a look at that super-duper typed script you
    use ;-)
    > It must be worth a fortune !
    >
    >
    > --
    > Nadia
    > Adobe� Community Expert : Dreamweaver
    > --------------------------------------------
    >
    http://www.csstemplates.com.au
    - CSS Templates | Free Templates
    > --------------------------------------------
    >
    http://www.DreamweaverResources.com
    - Dropdown Menu Templates|Tutorials
    >
    http://www.macromedia.com/devnet/dreamweaver/css.html
    - CSS Tutorials
    > -------------------------------------------------
    >
    >
    > "Murray *ACE*" <[email protected]>
    wrote in message
    > news:[email protected]...
    >>
    >> Get and install this extension:
    >> relativity from Jason Delgarno
    >>
    >>
    http://e7x.com/dw/
    >>
    >> It has a dialog box and help files and it will
    change a single page,
    >> folder, or sitewide from one method to the other.
    >>
    >> --
    >> Murray --- ICQ 71997575
    >> Adobe Community Expert
    >> (If you *MUST* email me, don't LAUGH when you do
    so!)
    >> ==================
    >>
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >>
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >>
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >>
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    >> ==================
    >>
    >>
    >> ".: Nadia :. *ACE*"
    <[email protected]> wrote in
    >> message news:[email protected]...
    >>> That's true, I thought of this later and there
    is an extension to change
    >>> the links sitewide but for the life of me I
    can't find the link - sorry
    >>> :\
    >>>
    >>> --
    >>> Nadia
    >>> Adobe� Community Expert : Dreamweaver
    >>> --------------------------------------------
    >>>
    http://www.csstemplates.com.au
    - CSS Templates | Free Templates
    >>> --------------------------------------------
    >>>
    http://www.DreamweaverResources.com
    - Dropdown Menu Templates|Tutorials
    >>>
    http://www.macromedia.com/devnet/dreamweaver/css.html
    - CSS Tutorials
    >>>
    >>>
    >>>
    >>> "Gary White" <[email protected]>
    wrote in message
    >>>
    news:[email protected]...
    >>>> On Fri, 28 Apr 2006 18:00:41 +1000, ".:
    Nadia :. *ACE*"
    >>>>
    <[email protected]> wrote:
    >>>>
    >>>>>Actually if you go to Site Definitions
    for that particular site
    >>>>>Advanced>
    >>>>>Local Info you do get a checkbox that
    asks: Links Relative to:
    >>>>>Document :
    >>>>>Site Root
    >>>>
    >>>>
    >>>> Just remember that this just sets the
    default for when the dialog
    >>>> opens.
    >>>> It won't change any existing links.
    >>>>
    >>>> Gary
    >>>
    >>>
    >>
    >>
    >
    >

  • Transparent images in cover flow view mode

    Hi out there & hello to the forum.
    I searched a bit, but all I found was a thread in the Finder and Dock section ([http://discussions.apple.com/thread.jspa?threadID=1553972&tstart=0]). Using CocoThumbX I managed to get the image transparent in Cover Flow in the Finder. But in iTunes the cover still has a white background. Does anyone know if this is a known bug in iTunes or if there is a workaround?
    Best,
    Fojel

    I actually figured out the answer to this one myself, with the help of someone's previous post about creating new thumbnails with a little app called CocoThumbX, which can be used to strip image files of their thumbnails and create new ones. I almost gave up on it, because the new thumbnails I was generating from it didn't show up any clearer. But then I used it to remove thumbnails only, without creating new ones afterward, and the images now look as they should in cover flow. I don't know if there are any negative side effects of not having thumbnails, or even where the original thumbnails were located in the system, but wherever needed, the computer seems to be generating it's own thumbnails for the images, and they're looking good. Hope this helps.

  • How do you edit the template image that appears at the top only in portrait mode?

    I am using a customized version of the iBooks Author template which has the space image. I have replaced the images for the book cover, chapter and section. But I noticed that when you rotate the ipad to view the entire TOC, the original space image is still there. How can I edit the template image that appears at the top of the Table of Contents only when you rotate the ipad in portrait view?

    I just tried w/that template - switched to Portrait mode...tapped once to select that image....cut - gone. Switched to Landscape...not there. Back to portrait...still gone.
    What process did you use?
    Can you repeat your issue with a fresh book?

  • Image previews do not appear when viewing RSS feed in Mail, why not?

    When I view the Cult of Mac RSS feeds on my old white Macbook I get the image previews displayed right away in Mail but on my 2010 MBP there is just a question mark where the image should be. Any idea how I can get the images to appear on my MBP?
    When I click to 'read more' and the page opens fully in Safari the images are viewable.
    cheers
    Simon

    Sure Thing...This is a screenshot of the Slider Menu with the buttons to the social media as they should be. Note: this is a screen shot taken from a "preview in browser" (Chrome) through Muse. When it builds and uploads, I no longer see the buttons and there is no hover state as there should be. Hope this helps-

  • Full Screen Mode with Menu Bar view mode appears with Blue Background??

    Can someone please help me figure out what I did exactly to unintentionally change the "Full Screen Mode with Menu Bar" view mode so that it now appears with a Blue Background, instead of the default gray one....and better yet, can someone let me know how I can switch it back to displaying the default gray background instead?
    Any suggestions would be greatly appreciated... Thanks!

    >let me know how I can switch it back to displaying the default gray background
    SHIFT-Click the Paint Bucket pool in that area using the gray of your choice (e.g. 132, 132, 132).
    (That's probably what you did to turn it blue.)
    Or, more drastically, you can trash your preferences.

  • I just got a white frame in the middle of my images in viewer mode. What is it and how did it get there and how do i get rid of it.

    I just got a white frame in the middle of my images in viewer mode in Aperture 3. What is it and how did it get there and how do i get rid of it?

    Just fishin' ...
    Is by any chance "View→Show focus points" checked?
    Does the frame persist after closing and re-opening Aperture?
    Notice anything else different?
    To post a screen shot, you first take it, them upload it.  To take them, I use and recommend Skitch -- one of the best little apps ever.  But this ability is built into OS X.  Use Grab or Preview (search OS X Help for full directions).  In Preview, use "File→Take screen shot ... →From selection ... ".  Save the file in Preview to your drive.  In the Discussion forum click the "Insert Image" icon (a camera) and select the file you created in Preview.

  • Yellow Boxes around type in normal view mode but not in preview?

    There are these yellow boxes that appear around type when in normal view mode, but when in preview mode it disappears.....any idea of what I can do to alleviate this issue? Here is an image of the problem....  

    This link should explain it:
    Field Guide to Composition Highlighting | InDesignSecrets

  • Saving Jpeg crashes Finder in Thumbnail View Mode

    Hi all.
    Anyone have this happen to them?
    My finder crashes and relaunches itself when I do the following:
    Have a finder window open in thumbnail view mode, open a jpeg image in Photoshop, then resave it. It happens without fail EVERY time I do this.
    I do not have the problem in list mode or that other mode (whatever it's called - the one that lets you see the subfolders).
    I'm running Panther on a PowerMac G4 and have had this problem from day one. I just did a clean install a month ago and the same issue exists.
    B.

    Actually Onyx appears only "reset" the Spotlight index, it doesn't force it to reindex or anything else that I'm aware of.
    I read up a bit more on Spotlight and tried to trash the index and associated files, hoping that it would reindex and all would be fine. However apon reboot it kicked back into it's old routine of cycling and eating up 99% of one of the CPUs.
    I decided to finally just disable the spotlight feature completely using the DisableTigerFeatures program.
    http://www.macupdate.com/info.php/id/18182
    Although I'm disappointed that I can't use Spotlight anymore (never used it much to begin with though) I can happy report that both my CPUs are mine again, my software and games are running snappier, my firewire hdd, iPod, and secondary SATA HDD not unmount and vertify just fine.
    Sad that for months and months I basically allowed my G5 Dual Processsor to be crippled by a buggy (in my estimation) piece of software. Finally I feel like my computer is safe to work on and I'm enjoying it for the first time in quite awhile.
    Thanks again Francine, had you not pointed my in the right direction I'd still be running a single processor machine that crashed all the time

  • Applying star rating/color label to "Current Pick" in Stack View mode

    Is it possible to apply a star rating/color label to the "Current Pick" in Stack View Mode? Thanks.

    is there a way of applying both the five-star rating, AND the green color label at the same time, with one keyboard shortcut, or otherwise?
    If you need to do this in exactly one action, then I don't think there is a way to do this. Of course, if you want to accomplish this in two actions, you can select all the 5 star images, and then apply the Green color label to them all in one step, but that isn't what you asked for.
    Is there any way to make my five-star rated photos more visually prominent in the grid view?
    Not that I know of
    ANother thought is to create a smart collection of your 5 star images, and then you can use the smart collection to view the 5-star images (none of the other images will appear)

  • I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!

    I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!
    I'm on a Macbook Pro and all of my software is up-to-date.
    The photos and events, etc. appear to be present in my photo library, but I cannot see the actual images--only an outlined placeholder.

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take 3 or 4 goes to work.

  • Unable to View the Images in OBIEE Title view

    Hi All,
    I am trying to add a image in the title view of Answers interface.
    I placed my image in jpeg format in the following 2 paths.
    C:\OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\images
    and
    C:\OracleBI\web\app\res\s_oracle10\images
    I restarted oc4j , biserver & presentation server..
    But I am not able to view the image. It shows a Red X botton.
    I checked my Internet explorer settingg. Everything is fine.
    Please guide me.
    Regards
    Mehaboob Jaan

    Ok here is my instanceconfig.xml file and i dont see anything called style.
    <?xml version="1.0" encoding="utf-8"?>
    <WebConfig>
    <ServerInstance>
    <DSN>AnalyticsWeb</DSN>
    <JavaHome>C:\Program Files\Java\jdk1.5.0_16</JavaHome>
    <CatalogPath>C:/OracleBIData/web/catalog/Arj</CatalogPath>
    <Alerts>
    <ScheduleServer>SSALWXPP072</ScheduleServer>
    </Alerts>
    <CredentialStore>
    <CredentialStorage type="file" path="C:\OracleBIData\web\config\credentialstore.xml" passphrase="secret"/>
    <!-- other settings ... -->
    </CredentialStore>
    <AdvancedReporting>
    <ReportingEngine>XmlP</ReportingEngine>
    <Volume>XmlP</Volume>
    <ServerURL>http://SSALWXPP072:9704/xmlpserver/services/XMLPService</ServerURL>
    <WebURL>http://SSALWXPP072:9704/xmlpserver</WebURL>
    <AdminURL>http://SSALWXPP072:9704/xmlpserver/servlet/admin</AdminURL>
    <AdminCredentialAlias>bipublisheradmin</AdminCredentialAlias>
    </AdvancedReporting>
    <!-- To configure a limited set of languages to be available to users uncomment the <AllowedLanguages> tag below and choose a subset set of language tags from the list. Values must be comma separated. -->
    <!-- <AllowedLanguages>cs,da,de,en,es,fi,it,ja,ko,nl,no,pt,pt-br,sv,zh,zh-tw</AllowedLanguages> -->
    <!-- To configure a limited set of locales to be available to users uncomment the <AllowedLocales> tag below and choose a subset set of locale tags from the list. Values must be comma separated. -->
    <!-- <AllowedLocales>cs-cz,da-dk,de-at,de-ch,de-de,de-li,de-lu,en-au,en-ca,en-cb,en-gb,en-hk,en-ie,en-jm,en-nz,en-ph,en-us,en-za,en-zw,es-ar,es-bo,es-cl,es-co,es-cr,es-do,es-ec,es-es,es-gt,es-hn,es-mx,es-ni,es-pa,es-pe,es-pr,es-py,es-sv,es-uy,es-ve,fi-fi,fr-be,fr-ca,fr-ch,fr-fr,fr-lu,fr-mc,it-ch,it-it,ja-jp,ko-kr,nl-be,nl-nl,no-no,pt-br,pt-pt,sv-fi,sv-se,zh-cn,zh-mo,zh-sg,zh-tw</AllowedLocales> -->
    <!-- <Disconnected><ArchiveIbots>true</ArchiveIbots><DisconnectedDir>disconnected</DisconnectedDir></Disconnected> -->
    </ServerInstance>
    </WebConfig>
    Please let me know how to add this and where to add.
    Thanks
    Jaan

  • REQ: Add 'Fit-width' or 'Fit-visible' view mode, in which the zoom level is automatically set based on the width of the _current_ page.

    Currently, the default zoom level when viewing a page of a PDF file is automatically calculated based on the width of the "widest" page of the document. This means that, if the document contains one page that is wider than the others or is in landscape orientation, then the default zoom, when viewing all the other narrower pages, is set in a way so that the page does not use the full width of the screen. This results in very poor experience, because the zoom level and the visible area of the page have to be constantly adjusted for each page. The latest update (at the time of writing) has added some extra view modes, but not the much needed 'Fit width' or 'Fit visible'.
    Personally, I can find no reason valid enough to justify the lack of such a view mode. Automatically setting the zoom level based on the width of the current page so as to take advantage of the full width of the screen should be a must have feature for mobile devices, if not the default behavior. The current default behavior regarding the zoom level is pretty much useless, even on 8"/10" screens. There should be a view mode in which the full width of the screen is always used to display the document.
    Examples of documents for which the Adobe Reader for Android provides a poor reading experience are:
    documents which contain some of their pages in landscape orientation.
    publications which, apart from the main content, also contain the full front and back cover in a single page (usually first page which is much wider than the content pages) or any other extra pages like cards or application forms (that are meant to be printed) which usually use an A4/Letter page size etc.
    documents which have been cropped by external utilities or scripts so as to eliminate unneeded white margins (in some cases not all pages have the same width).
    Please consider fixing the default behavior in future releases of the Reader for Android or add a 'Fit width' or 'Fit visible' view mode.
    Thank you in advance.
    Message was edited by: George Notaras
    Improved descriptions of example documents.

    To add to this, if you prefer you can separate your JavaScript from your JSF pages.
    Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
    Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
    You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
    (This can also be a URI reference to a JavaScript file hosted on a web server)
    <f:facet name="metaContainer">
      <af:resource source="/js/myJsFile.js" type="javascript"/>
    </f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
    It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
    A solution is to use <trh:script>.
    Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
    then in place of the above code use:
    <f:facet name="metaContainer">
      <trh:script id="script1" source="/js/myJsFile.js"/>
    </f:facet>Now after a page submit the JavaScript still functions.
    Edited by: Matthew Carrigy on 12/08/2009 10:39

  • When browsing a new library that I created, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle the image appears. How do I get images to appear in the browser rectangles?

    When browsing a new library that I created and exported onto an external hard drive, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle, the image appears, but all the other rectangles remain empty - no image. How do I get images to appear in the browser rectangles? I am viewing this on a second computer (an older intel duo iMac), not the one I created the library on (a MacBook Pro). Both computers have Aperture 3.2.4 installed. When I return the external to the MacBook, all images appear in browser rectangles. What's happening on the iMac?

    You may have a problem with the permissions on your external volume. Probably you are not the owner of your library on the second mac.
    If you have not already done so, set the "Ignore Ownership on this Volume" flag on your external volume. To do this, select the volume in the Finder and use the Finder command "File > Get Info" (or ⌘I).
    In the "Get Info" panel disclose the "Sharing & Permissions" brick, open the padlock, and enable the "Ignore Ownership on this Volume" flag. You will have to authentificate as administrator to do this.
    Then run the "Aperture Library First Aid Tools" on this library and repair the permissions. To launch the "First Aid Tools" hold down the ⌥⌘-key combination while you double click your Aperture Library. Select "Repair Permissions" and run the repair; then repeat with "Repair Database". Do this on the omputer where you created the library and where you can see the thumbnails.
    Then check, if you now are able to read the library properly on your iMac.
    Regards
    Léonie

Maybe you are looking for