Images edited in proPhotoRGB now have wonky colors...
Somehow my default in ACR changed without me noticing from sRGB to proPhotoRGB and now the images from 2 of my sessions have really wonly colors when saved on my PC... I did some reasearch and I guess I was supposed to convert back to sRGB, except I had no idea this was going on so now I am in a real pickle. Does anyone know if there is a fix for this that does not involve re-editing a number of images? I am really hopin there is a way to resque these files!
OK... so my images were just saved as jpegs in full resolution. I was just getting ready to burn a CD of the session for the client and also post the images in an online gallery on my website. What happened is I created a pin on Pinterest with an image that was unrelated to the images from the session I am talking about and I noticed the colors were really dingy and completely off. That was my clue something was wrong. The I went bck to my session images and burged a couple on a CD and viewed them on a different computer using just the default windown viewer and they looked the same way. I had to research to find out what was wrong and finally realized that it was an issue of my settings in ACR. Somehow they had changed from sRGB to proPhotoRGB, which I don't typically use for editing. Since I wasn't aware this was happening I just saved the files as jpegs (full res) on my computer. I didn't do any resizing or anything else to them. And I still have some of the files saved with layers if that can be of any help. But I also have some that I wasn't planning on correcting in any way and those images I flattened and saved as jpegs ready for the client's CD.
I also tried opening one of the images back in Photoshop and chaning the profile back to sRGB, then saving it but it didn't make any difference.
I hope this gives some more insignt into what I did... please let me know if there is a piece of information you still need... I am desperately trying to avoid hours of re-editing!
Thanks so much for your help!!
Similar Messages
-
I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide. -
CS4 images "edit original" now open as jpg instead of in Photoshop
CS4. InDesign 5.0.4. Just upgraded OS to Snow Leopard (10.6) Friday.
Now my images in InDesign no longer open into Photoshop but open as jpgs which means I now have do extra steps of going to Photoshop, finding the image and then opening it.
How do I get back to images opening directly in Photoshop when I click on them in InDesign and then go to edit original? Thank youBob, we are talking about thousands of images!!
Isn't there a step in InDesign to get back to normal like on Friday? There has to be something inside InDesign that must have changed....
And you are right.... CS3. My other computer has CS4 on it.
Thank you. -
I am using Aperture 3 now and I love it. But I would like to purchase or download perhaps some freeware, easy to use photo imaging/editing software with more filters, perhaps layering etc. I don't want something with a very steep learning curve, getting to old for that. My Apple mentor suggests Pixelmator or Gimp ? Are there some others out there? When I was still in the Windows world, I used Photoshop Elements but that is now in my past. Any ideas?
Pixelmator or Gimp are both nice tools for advanced image processing and compositing. I.e. Gimp can do pretty much the same as Phtoshop. You might also have a look at digikam http://www.digikam.org/drupal/download/binary
Digikam is not just an advanced image processing and compositing program, it is also content management system like Aperture or iPhoto.
I also find GraphicConverter a nice tool, but it is not free.
If you want your image editing tools to integrate well with Aperture, I would look first at the available plug-ins, start with the plug-ins offered in the Aperture pull-down menu
Aperture -> Aperture Plug-ins... -
I have very thin, colored lines that have shown up on my IMac monitor screen. I don't know where they came from or how to get rid of them. I'm concerned now because I started with one and now have three. Does any know why this occurs or how to get rid of them?
I got an address from Applecare, although I can't place my hand on it right now. I didn't bother persuing the letter route myself as I didn't expect much. I know that the location was Cork, Ireland though as that where the UK Applecare is based as far as I'm aware. The best thing to do is to call Applecare (if it's free) and discuss the issue. State that you are not happy wit the fact that you will have to pay to have the problem resolved especiiay if it is an ongoing problem that has not been resolved. I ended up speaking to a senior manager of the Applecare team who then proceeded to tell me about mailing in my grievence to customer services division or something like that.
If I can find the address I may post it if I'm allowed.
In the case of age, Schools usually have a 5-year life-cycle as they tend to be used differently than consumer machines, i.e. being used constantly on a daily basis for at least 12 hours with no break. you would expect issues to appear after a few years, but I expect problems that arise through defects to be resolved and stay resolved. As I mentioned we had machines for around 2 years before the lines appeared and sent them to be repaired. I'm happy with that. What I am unhappy about is the fact that the problem has reappeared exactly in the same way and now I'm left with around 7 machines that I either pay loads to repair or, the more likely replace the machines with newer ones since the age is now big enough to warrant the replacement.
Sorry for the lengthy moan, but these are the reasons I purchased Apple ahrdware in the first place to avoid the "not our problem" stance some PC vendors usually take, similar to the Dell monitors thread mentioned in here somewhere. -
I Recently updated my mac book pro to sox mountain lion v10.8 and appear to have lost my email edit button which allowed me mark multiple emails then delete those marked en masse. I now have to delete individually. Can any one advise how to correct this please. Thanks.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro -
My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected? To edit in Photoshop I have to export image from Lightroom then import into Photoshop. I have other programmes such as NIK and if I wish to edit in these everything works fine.
Same here. I've never had trouble with this function before.
It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
I'm on a Mac, using OS X Yosemite, 10.10.1 Lightroom is version 5.7 Photoshop is CS5, version 12.0.4
FWIW, I also can't automate>Photomerge ... . Makes me think Photoshop, not Lightroom, is all wacky. I tried dumping PS preferences -
ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut or wacom pen click, i now have to click on the image title bar, how can i fix this ?
@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson -
I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?
Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-) -
i use to be able to scale down objects highlted in box by clicking any corner holding down mouse and scaling down, that option is gone, is it an error on my settings or has that option been removed I now have to go to menu option click edit, then scale, and then manually have to scale down a percentage.
Copy cat.
-
I purchased and installedParallels Desktop 8 for Mac, I now have to purchase the Microsoft Word software, is the student edition my best bet? I have a MacBook with 2 gig of RAM, and am curious as to any advice anyone has, thank you.
I currently have 71.88 GB out of 118.86 of HD memory available
These is the system overview:
Model Name: MacBook
Model Identifier: MacBook2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MB21.00A5.B07
SMC Version (system): 1.17f0
Sudden Motion Sensor:
State: Enabledthe student edition is the best of you are a student and can get the discount.
-
(InDesign CS5) I have created hundreds of InDesign documents incorporating images stored on an external USB connected drive. I did a manual back-up to another drive at regular intervals but far from ideal.
I now have a network drive which is properly backed-up. I have copied all of the images and folder structure from the USB connected drive to this new drive.
My question is how I get all of the links in my indd files to point to the new drive. I am aware how to do it one file at a time, but is there a way of doing the same thing over many files/folders at a time?It depends on how you organize your work. If you have one folder for images for a document, relinking one image should alert you that other missing images are in the same folder, but this assumes that images are missing. If the links window sees a clear path to the original location of the images, they aren't missing, so that won't work.
Another thing to try is to select all of the images in the links window and go to the fly-out menu and select Relink To Folder (navigate to the new folder, and you don't even have to select any images by name).
If you store your images in many different folders for the same document, you might want to either package the document to copy all of the images into one folder (you can specify to only copy images if you like) or use the fly-out in the links window (Utilities>Copy Links To…) and select or create a new images folder. -
Now have strange multi color lines on a 2 inch square on desk top. Also above some of Doc apps. Why?
and how to get rid of them?A Safe Mode boot help ...
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
Then see if the lines / square is gone. -
I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK. Also I cannot drag the selection to another photo in the photo bin as before.
Hi,
Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
Thanks,
Anwesha -
Having corrected my corrupt catalog (PSE 11) I now have thousands of duplicate images. Is there any way of of removing the extra copies? I've had suggestions that apply to Windows, and iPhoto but can't find any advice for Photoshop Elements on Mac Maverick
You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse
Maybe you are looking for
-
I think there should be a time limit of 2 years to the icloud find my device. Then it should reset.
So many people have locked devices that they bought on eBay. I think apple should have a time limit of 2 years then it should rest back to factory settings with no Icloud attached. Thus if you have got scammed there is hope for you. All you have to d
-
Internal table permutations: for experts
Hi all, i have an internal table with 10 values. I want to have all permutations. There are 10! possibilities. How can i calculate this? regards
-
Hi guys, First of all, I am really newbie in DB deals. There are "best practices" about the order/position of the columns of a composite primary key?... By instance, I have a table named STOCK: CODE ISSUE STATUS etc... 1020 2007 OK 1030 2007 OK 1040
-
my username that you can search is [Removed for privacy] my friends cant find it also not when they only use [Removed for privacy] pls help me!! Subject/title edited; please, no profanity in posts. First things, first: for your safety and protection
-
Data in .jsp or HTML form fields, to a JAVA File and DB
Hi, I am new to the JAX-RS, I have a form where I fill in some details, There is a submit button towards the bottom of that form, when I click submit, it needs to do two actions: 1) Pass the data in different fields through different variables to int