Images from camera card

I downloaded images from my camera card into Elements. They have an offline symbol on them and the images are fuzzy. What does this mean and how do I correct it?

Do you have your card connected or disconnected ?
It seems you have added images from your card but have not moved to your hard drive, so if you have card disconnected then the images will show up as Offline as the source images are still on card, Elements just have the thumbnails.
In order to solve this, you need to first copy all the images to your hard drive from your card and then import in PSE from that copied location.
Hope this helps !!

Similar Messages

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put ab

I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdris

Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie

How receive image from camera with PCI-bus

Hello all
Please help
me.
I have LV 7.1.1.
I wont
watch two and more images from cameras at the same time.
I have capture
card (PCI-bus) with 4 video-input.
What kind
of data must be transfered from this capture card to LV?
With respect
Aleksandr.

Hello Aleksandr
please provide more information, what type of video card do you have?
Have you configure the card so you can watch an image with MAX?
I suppose the card has the ability to capture more than one image at a time is that true?, however most of the cards that I know of, have several inputs but you can only display one image at a time, you can swith between them and capture and image from another input, to capture more than one unit at a time you would need to open/close sessions with the instrument/card such that you are switching from one input to another
vicente

Can no longer download images from CF card.

I've been downloading images from my card reader via Bridge for a long time. I just upgraded LR 3.6 to LR 4, and now Bridge doesn't seem to work. If I try to download images, I get the spinning circle, then nothing. The dialog box for importing images from the camera never pops up.

I also wonder if the problem was due to a Photoshopdownloader.exe that was running in the background...
Not familiar with exe as a Mac user but can you specify this? Do you mean the Adobe Photodownloader that comes with Bridge or is it an other part of Photoshop? Some photo applications have been set to auto start upon connecting a camera device. I always deselect them and choose Photodownloader myself on the moment I want to use it.

HT4101 I discovered a fatal flaw in the iPad procedure for downloading images from camera to iPad: after selecting the images to be downloaded, an accidental touch of the "delete" button, wipes all selected images from the camera, with no warning?

After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?

No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
I've loaded thousands of photos on my IPad and never have had that problem.
Don't blame a moment of carelessness on your device.
If you want to make such a suggestion to Apple use http://apple.com/feedback

Dimmed Images - From Camera

Hi,
I'm a MAC newbie. Each month, I download images from my camera to a folder on my MAC. I am not using iPhoto. The images open fine in Preview, but appear dimmed in Finder. Why is this? It's not disturbing functionality, just a bit annoying.
Diva

Do you have your card connected or disconnected ?
It seems you have added images from your card but have not moved to your hard drive, so if you have card disconnected then the images will show up as Offline as the source images are still on card, Elements just have the thumbnails.
In order to solve this, you need to first copy all the images to your hard drive from your card and then import in PSE from that copied location.
Hope this helps !!

How do you Automatically Copy Images From Camera?

I would like to create an AppleScript that will run when I plug in my digital camera. Here is what I cannot figure out.
How to make it run when the camera is plugged in.
How tow to copy images from camera to a designated folder.
Thanks!

You can do all you requested - without 'AppleScript'.
01. Connect your camera launch 'Image Capture' ('/Applications/' folder - if it does not automatically launch.
02. Select the 'Image Capture, Preferences...' menu item.
03. Click on the 'General' tab.
04. From the 'Camera:' 'When a camera is connected, open:' pop up menu - select the 'Image Capture.app' menu item.
05. From the 'Devices' menu select your camera from the menu items list. A window will appear with the title of your camera.
06. From the 'Download To:' pop up menu select where to save the camera's photographs. You can select any folder anywhere on your hard disk drive(s).
07. Click the 'Options...' button, and from the drop down sheet click on the 'Connection Options' 'Automatically download all items' check box - to add a check mark. There are other options you may have be interested in.
08. Click on the 'OK' button.
09. If you want to download the photographs now - click on the window's 'Download All' button. Or, to test the above setting changes - quit 'Image Capture' and disconnect your camera. Then reconnect the camera - and watch the above setting changes take effect.
Note:
The above automatic action can also happen if the storage device of the camera were inserted into a USB digital camera card reader. So long as apply the Steps above, and you select the USB digital camera card reader from the 'Devices' menu's menu item list in Step 05 above.
'Image Capture' is not scriptable; but, may be control-able via 'tell application "System Events" to tell process "Image Capture" ....
When a camera is connect to the Mac, the storage card of the camera is mounted onto the 'Desktop' and also listed, as an alias, in the (invisible) '/Volumes/' folder.
Now that you know the name of the storage card ... you can create a 'Folder Action Script' (an example is presented below) and save it into the '/Library/Script/Folder Action Scripts/' folder,
Open the '/Volumes./' folder (in 'Finder' via 'Go, Go to Folder' - enter '/Volumes/').
Perform a right button click ('<control> - click, for single button users) on the 'Volumes' folder's window, and select 'Enable Folder Actions' (if not already).
Rpeat the right button click (<control> click) and select 'Attach a Folder Action...' - selecting your script ('Volumes_FAS.scpt' as shown below).
Below is a 'Folder Action Script' example - where you will have to substitute 'NO NAME' with the name of your digital camera's storage card's name.
-- --- Save code as a script with the name 'Volumes_FAS.scpt' --- --
on adding folder items to this_folder after receiving added_items
set myStorageCard to "NO NAME" -- The name of my 1 GB stroage card. The name of your card may differ.
repeat with i in added_items
tell application "Finder" to set tName to (name of i) as string -- Obtain name of mounted storage card.
if (tName is equal to myStorageCard) then my handle_card(i) -- If my storage card, continue processing.
end repeat
end adding folder items to
on handlecard(localVolume)
set folder_Path to ((path to desktop folder from user domain) as string) -- Path to 'Desktop' folder.
set download_Folder to "NO_NAME Photographs" -- Name of folder to store storage card's items (files and folders).
-- create download_Folder, if it does not exists.
tell application "Finder" to if (not (exists folder (folder_Path & download_Folder))) then make new folder at (folder_Path as alias) with properties {name:download_Folder}
-- Duplicate all the items (files and folders) of the storage device to the '~/Desktop/NO_NAME Photographs' folder.
tell application "Finder" to duplicate items of local_Volume to (folder_Path & download_Folder) as alias
end handle_card
-- --- End of code --- --
Review 'Finder's dictionary (in 'Script Editor') for the various ways to incorporate 'duplicate ...'.
Mac OS X (10.4.4)

How do I erase all images from a card in the Cannon Rebel t3

how do I erase all images from a card in the Cannon Rebel t3

Hello debrusso,
I would just like to give some quick advice that you all may already know but I was just told this countless of times that I thought you all would like to know. \
I have been told by numerous of photography professors that it is always best to try to format your camera every now and then. Because your memory card is not really deleting the photos but rather hiding it somewhere. This is a problem because it still takes space from your card. The solution to this is to FORMAT because it is one of the safest ways for your camera to erase images. It also sets up properly for your camera like new. But make sure to save your images before doing formatting. I have had many silly accidents this way. Lol.

Grabing images from camera & Apply OCR To that image

Hi,
I m developing a sample application on OCR. At last visit i m posting the same question.But no one can answer me.
Here i Create a Vi for grabbing images from camera. The Images are grab & save to the desired folder.But the OCR is not working on that snap image.
I m modified some Sample NI VI's for capturing the images & for OCR.
I m new for labview. I cant understand where is the problem in the VI.
i also create a character set file for reading the characters using OCR Train
so please help me to find the solution.
Attachments:
Character reading.vi ‏91 KB

HI.
Let me give some suggestions regarding your code, (See pictures), and attached an example that you could serve.
Regards.
Jonathan Cruz
CHALLENGER
K U D O S __ B I E N V E N I D O S
Attachments:
Camara OCR.vi ‏42 KB
11.JPG ‏77 KB
22.JPG ‏17 KB

Camera software not opening to transfer images from camera to computer. What to do?

My PowerShot 720is software ZoomBrowser EX not opening on computer. No images load and I don't have option to click on "connect to camera" so I can transfer images from camera to computer. Message says "Zb Module has stopped working. Windows is looking for a solution to this problem." Anyone have this happen and know what to do?
Thank you!

Hi BLG,
If you haven't already done so, please update your software for Windows 7. Here's how.
Just click here to access the software updates for your camera. Once there, just enter your operating system, then the version of the operating system. Now click on "Software" to show the software updates.
Click on "ZoomBrowser EX 6.9.0a Updater". Installation instructions are on the next page. Also, please download "CameraWindow "DC 8.8 for Windows" to your desktop.
After accepting the required disclaimer, please download the program update to your desktop.
After downloading all the software you choose to install, please install ZoomBrowser last. This will allow it to link to the other Canon software on your computer.
Since you've installed an older version of software, you may now double-click on the program update to install it. If not, just put the CD-ROM in your computer's optical drive and stop any installation program that starts.
If you've already updated the software for Windows 7, please contact us for assistance. Click here for contact options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Just installed elements 10 when I try to download pictures from camera card, elements 6 comes up to

Just installed elements 10. When I try to download pictures from camera card, elemnets 6 comes up to process. I did mconvert.

It sounds like a configuration option. I would recommend posting your inquiry to the Photoshop Elements forum though. Also please include which operating system you are using when reposting your inquiry.

How do i delete images from camera after importing

how do i delete images from camera, ipad, iphone after importing the files into aperture3?

Image capture will allow you to delete from the device after import, but I believe it is by design that Aperture does not do this as it is recommended (in the case of a camera) to use a device's own delete function rather than a 3rd party like Aperture. This also allows time for a proper backup before everything is erased from the device?

Capturing images from camera and uploading to sharepoint library automatically.

Hello Everyone,
My requirement is to capturing images from camera and uploading to sharepoint library automatically. No manual uploading will take place.
Please suggest me.
Thanks,
Rajesh

Hi,
From your description, my understanding is that you want to capturing images from camera and uploading to sharepoint library automatically automatically upload images to SharePoint library.
You will save images in your local computer after capturing visitors’ image. You could develop a custom timer job to periodically get pictures from the local folder in your computer. Please refer to this article:
Create and Deploy Custom Timer Job Definition in SharePoint Programatically
http://www.codeproject.com/Tips/634208/Create-and-Deploy-Custom-Timer-Job-Definition-in-S
you could upload pictures to your SharePoint from the folder with C# code, please refer to this article:
How to: Upload a File to a SharePoint Site from a Local Folder
https://msdn.microsoft.com/en-us/library/office/ms454491%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Capture images from Camera directly at high resolution

Hello Users,
I want to capture images from Camera directly at high
resolution. The problem is that although I am able to capture
images from a Video Object, but the images are small because the
Video size is only 160x120. So if I am able to capture directly
from Camera, I am sure to get a higher resolution images at which
the camera is capturing.
Any help in this matter will be of great help

Hello Users,
I want to capture images from Camera directly at high
resolution. The problem is that although I am able to capture
images from a Video Object, but the images are small because the
Video size is only 160x120. So if I am able to capture directly
from Camera, I am sure to get a higher resolution images at which
the camera is capturing.
Any help in this matter will be of great help

Images from camera card

Similar Messages

Maybe you are looking for