Images from Canon50D via cable/usb port are upside down and reversed

Hi friends, When I attach a cable to my 50D and the usb port the images appear to be upside down/reversed on the preview screen in lightroom. They actually do load correctly, and if I use a card reader I don't have the problem. This is so wierd! thoughts? thanks, s

Re: Attaching camera: Don't do that!
It must be some odd juxtaposition between the OS, how it 'sees' the camera, and perhaps auto-rotate.

Similar Messages

I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?

I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?

Thank you for your reply. I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years. The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import. Now all of a sudden my iMac does not recognise the camera. However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing. So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years. I can only assume that the settings on the iMac may have changed, but I cannot verify this.

In Mavericks iPhoto slide shows, why do the last pics come first, some pics are upside down, and some vertical pics are horizontal? How can I fix this?

On my iMac OSX, 10.9.4, Mavericks, I have been trying to view an album as a slide show. The slide show starts at the end (bottom row picture) instead of the beginning (top 1st picture). I have gone to View>Sort Photos>Manual. But the order of Ascending and Descending choices are greyed out with the default check by Ascending. How can I start at my beginning without rearranging all the photos? Also, some of the photos are upside down and sideways, even though they are correct in the album. How can I fix this?? Thank you! Also, can I include a video in the slide show? Up to how many seconds/minutes?

Is this a slideshow created directly from an album?
There's a bug with iPhoto 9.5 and Mavericks in that slideshows from Albums do not play correctly if they are sorted manually. Only photos that have been sorted by date, keyword, rating or title will play from albums correctly.
To have a slideshow with photos sorted manually use the slideshow mode in iPhoto.
Send a bug report to Apple via http://www.apple.com/feedback/iphoto.html.

When I import videos taken with my iPhone 4S to my Windows PC some of the landscape videos are upside down and all of the portrait videos are rotated 90 degrees. It makes a difference depending how I hold the iPhone when taking videos. Help!!!

When I import videos taken with my iPhone 4S to my Windows PC, some of the landscape videos are upside down and all of the portrait videos are rotated 90 degrees. It makes a difference depending on what position I hold the Iphone when taking videos. Help!!!!

Sometimes syncing will have problems with very large video files like this. I'm not sure you will be able to overcome this, but if the videos are important enough you may consider purchasing 3rd party software such as Touch Copy to transfer them.

USB ports are not working and I can't figure out what to do!

My laptop is a HP Pavilion dv4-1225dx Entertainment Notebook. I've had it for almost three years now. It is running Windows Vista, the same it came with. The problem has only just recently started or was just discovered.
My problem is that the two USB ports in the side do nothing when something is plugged into them. The metal part of the USB devices gets hot but no lights come on the flashdrive and the camera doesn't act like it is plugged in at all. I've looked through Device Manager and it says they are working fine and the correct driver is installed already. There is also no older driver to rollback to. I've tried deleting them, disabling them, and everything that has been suggested online. I even flashed my BIOS from F.33 to F.55, whatever that means, and still nothing.
Does anyone know how to fix this problem? I am a filmmaker and desperatley need my USB ports. Any help would be appreciated greatly

USB ports must be enabled in order for them to work. If you disabled them it is possible that they still are disabled.
If that is the case, have you tried any of these? http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00820529&tmp_task=solveCategory&lc=en&dlc=en&cc...
By the way, even though Windows XP troubleshooting may not seem to apply to your situation, sometimes these sorts of errors and problems still happen in Windows Vista. It is rarer but it still happens. One Windows XP based solution can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00035365&tmp_task=solveCategory&lc=en&dlc=en&cc...
Also, take a look at power management settings for your USB hub and/or USB ports. If they are enabled, try going to Computer Management, Device Manager, and then right click on the USB ports and select Properties. Following this, click the Power Management tab and uncheck the option "Allow the computer to turn off this device to save power" and click OK and exit out of Device Manager.
Odd as it seems, sometimes a restart is necessary for this to work completely.
Also, if you have tried removing the USB Hub drivers according to HP methods, you need to make sure that nothing is plugged into the Ports when you remove them. Often, a restart still is necessary even if some techs do not think to instruct you to do so. After a restart, allow the drivers to reinstall--all of them. Sometimes you still will need to restart your computer again afterward. This sometimes takes a few minutes. But, you must in any case make sure that nothing is plugged into the ports.
You may also want to check to see if your computer has specific drivers for your USB ports rather than the generic ones. If so, running the option for restoring drivers in HP Application Recovery will fix this. If they are there you will see the USB drivers listed.
On rare occasion, there is a problem with a device further down the tree than the USB ports and/or USB hubs themselves. These problems are most often fixed by removing the device that controls the USB Hub, such as the devices attached to the PCI Bus and connected to the USB. You will see where these are connected by changing the view to "Devices by Connection" rather than the "Devices by Type" option.
Let me know your status, please, after you have tried these options. If you have already tried them all out, let me know that, too and we can see if there is another option for you to try.

TS2972 I am using Apple TV to wirelessly access photos from a folder on my desktop computer, but when I view them on my TV, some of the photos are upside down and sideways, even though I have flipped, cropped them, and saved them on my desktop. Help!

But they sometimes show up sideways or uspided down when viewing them on my tv, even thogh I have flipped and saved them in my desktop folder. How can I view them in the same format as I have them saved in my computer?

Welcome to the Apple Community.
Try editing them in a different photo program.

PavillionG7-2315nr windows 7(64 bit) USB serial control or usb ports are not working. Please help!

Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
Shawe

Hi:
Download and instal both of these drivers and reboot.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405...

Can I copy photos from the San Disc in my camera to an Apple PC via a USB port on the PC?

Can I copy photos from the San Disc in my camera to an Apple PC via a USB port on the PC?

Yes.

UM150 hooked up via 2 USB ports on iMac12,1 can't get A1409 to work

Pantech UM150 works perfect. Tried a hotspot, after getting five bad ones, in 14 months from Verizon. I went back to my UM150, which is flawless.
It is hooked up to my iMac, via a wye utilizing two USB ports. Great speeds and signal. So it is wireless like my phone, also my modem. Will work with 1 USB port, thou it comes with a wye to use two ports. Makes it allot faster.
So I just bought a new ( to me ) unused Time capsule A1409 2TB. I figured I could just hook up a RJ45 / Cat 5. Going from the make to the ethernet WAN Port and make it work, not. At least go to one of the 3 LAN ports and move my data / backup that way, not.
Bought these items below > to go from USB male UM150, female USB connector both sides, in the middle. Than a male USB to a RJ45 connector and run a male x male Cat5 to the Time Capsule.
Tried all kinds of stuff that I don't even remember. A1409 did go green and I think I did a backup, woke up and Mac was off. Thou when I run my Sophos scan it sees 600k items on an external HD.
Just want to backup dailey and use it as a wi-fi spot for my PC and blu-ray in another room.
Also a picture of my wireless modem / UM150 and wye connector at the bottom.
Thanks for any help.

Oh, thats not exactly what I meant
Basically:
The server serves Web and QTSS via 204 to the world via en0.
Then, there's 5-10 machines or so on 128 (and 1-2 on 204) that sync over 3TB of data to the machine via 128 (this sever is the only one we have on site that has raids hooked up to it, so its the central data storage so to say), so en1 is pretty much completely saturated between 12am and 8am (and during the day when there's a lot of new work going on). Originally we used to do this over the primary web interface and all the web traffic would suffer (and especially qtss... we'd start getting disconnected errors all over the place when we started up massive copies).
Half of the machines are 204's and the rest are 128's, which is why we want the ability for en1 to be able to talk locally to machines on either 204 or 128, without having to interrupt the main interfact (if that makes any sense). Does that seem like a sensical solution?
If it also helps visualize a bit:
I only have access to register 8 machines on the 204, and TONS on the 128, but im not allowed to serve .com traffic on 128. Technically, the 128 does talk to the 204 locally on location, but its done through a nasty switch and we dont see much higher than 10Mbps tops.

Macbook pro retina 13 late 2013, usb ports are intermittent with iPhone

Macbook pro retina 13 late 2013, usb ports are intermittent with iPhone
when i connect my iPhone 5 to the laptop it keeps connecting and disconnecting, I've had this problem since owning the macbook. change of cables makes no difference neither does which port i use.
is there any advice anyone could give me?
many thanks.

Hello there Jake,
It sounds like your phone is acting like you are connecting and disconnecing it over and over again even with another USB cable. I would use the troubleshooting in the following article to help you determine what the issue might be.
iTunes: Resolve USB-related alerts
See if the cable connection at the device or computer has come loose or unplugged.
Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
Close any virtualization apps (such as Parallels or VMWare).
These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
Restart your computer.
Restart your iPhone, iPad, or iPod touch.
If your iOS device displays the Connect to iTunes screen, reset your device and then restore it.
If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
Update to the latest version of iTunes if you haven't already.
Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
Thank you for using Apple Support Communities.
Take care,
Sterling

How do I determined if the USB ports are working?

How can I determine if the USB ports are working. Macbook Pro i7.
Thanks for any help. This is a new computer to me migrating from a PC system.

Blessings to those who are able to reply with possible answers. I am sorry....but I have spent days working on getting my two USB ports to work also. I basically use the USB ports for a wireless mouse and various flashdrives/memory sticks. I have a MacBook Pro 2011 Snow Leopard 10.6.8 I have tried software update, SMC and PRAM resets, battery reset, hardware test, creating a new user account....and browsing and reading numerous discussion boards.....awgh! I have stopped short of using my install DVD (fear of loosing data), upgrading to Lion or Mountain Lion (some fear of loosing an application that might not be compatible), contacting an Apple Store (AppleCare or whatever--live 2 hours away + fear of expense), and of course, trashing the laptop. Does anyone out there have any possible solutions? I see I am not alone. --A frustrated first-time Apple products owner.

Time machine has losing contact with my external drive, connected via a USB port.

Recently my Time Machine program has begun losing contact with my external drive, connected via a USB port. When I attempt to open Time Machine, it indicates there is no external hard drive. When I click on "setting up time machine" it opens airport utility. I've tried rebooting, run disk utility repairs for both hard discs, pulled and reconnected the USB cable, even completely shut down the system. Eventually the two re-establish contact, but I'm not certain what I've done that causes this. The lost contact appears to happen during the weekends. The external hard drive is a MJaxtor OneTouch 4. What should I be doing to solve this problem once and for all?

I use a little app named EasyFind - free at the App Store. It will allow you to search individual volumes or all volumes.
Download it and see if it will help.
Clinton

I've recently bought a Time Capsule (3TB); then I've added an external HD of 2TB to my TC via its USB port to store my iTunes Libraries. I would like to backup my external HD with Time Machine in the HD of TC. Is it possible?

I've recently bought a Time Capsule (3TB); then I've added an external HD of 2TB to my TC via its USB port in order to store my iTunes Libraries.
I would like to backup my external HD with Time Machine in the HD of TC. Is it possible?

I would like to backup my external HD with Time Machine in the HD of TC. Is it possible?
Sorry, but not possible.
Time Machine can only back up the internal drive(s) in a Mac....or a drive that is connected directly to a Mac via USB or FireWire.....provided that the drive is formatted in Mac OS Extended (Journaled).
I am not recommending this, but you might be able to move the drive from the USB port to the Mac, and have Time Machine back it up that way.....then move it back to the USB port on the Time Capsule......but this will involve doing some risky things.....and manually changing settings around everytime you make the swap. Something will surely go wrong....but up to you if you want to try it.
Carbon Copy Cloner will back up the drive connected to the USB port on the Time Capsule to the Time Capsule disk, but these will not be Time Machine backups. SuperDuper claims to also be able to do this.....but I have not tested it.

Usb ports are not working in windows 7 (64bits)

hello
recently installed windows 7 on my laptop 15-n203tx
problem is my usb ports are working great in pre installed win 8.1 but now in win 7 just one port is working and it is usb port 2.0 and other two are 3.0 and not workng plz help me to fix this issue !!
This question was solved.
View Solution.

Hi:
You need to install this usb3 driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&dlc=en&lc=en...

HP Pavilion dv6-6b10tx two of the usb ports are not working

I have recently bought a HP Pavilion dv6-6b10tx....and had it fixed by hp for a problem with the beeping noise.
After sending my laptop for repairs( replacing the system board), I received my laptop but two of my usb ports are not functioning...
I did a bios update and did the hp update to see if it actually fix anything but not luck. So I went device manager and found a exclamation mark on the renesas electronics usb 3.0 host controller with a device status 'This device cannot start. (Code 10)'. What do i do??

The question is why is the port not working? Is something in the port that you can see? If not, then there isn't much you can do but take the computer in to the genius bar and have the techs see if it is a circuit problem that can be fixed.

Images from Canon50D via cable/usb port are upside down and reversed

Similar Messages

Maybe you are looking for