Images from the camera

Where on my desktop can I find the images I took without emailing them to myself?
Solved!
Go to Solution.

For one, I would advise you to get a Media Card quickly, or you will suffer from low device memory issues.
You need to download and install Desktop Manager with the Media Manager software.
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I have an Air running Mountain Lion. I also have a digital point-and-shoot camera, but have never downloaded any images from the camera to this Air. If I connect the camera to the Air, what might I expect? Will connecting the camera to the Air by a cable

I have an 11" Air with lots of remaining capacity running Mountain Lion. I also have a digital point-and-shoot camera. I have never downloaded images from the camera to this Air. However, if I just connect the camera to the Air's USB port, with the camera's available cable, and the Air is open, will a program like ImageCapture or iPhoto, auomatically come up, and I can begin to download wanted images? Or, will this sort of connection delete or fry everything on the Air? Do I need any other software on board? Will current Apple onboard programs allow me to download images from my camera and not destroy everything else?

Answered. Thanks.

How to view tagged images from the camera in Lightroom?

How do I see a tagged image from the camera (tagged using the lock button, to remind me of a image I want to find quickly) once imported into Lightroom? This is possible to do in Photomechanic, as I can see all of the tagged images from the camera once opened in Photomechanic. Yet so far I have not found a way to allow me to do this in Lightroom so far. Any solutions welcome please.

There isn't a way to do it that is part of Lightroom. There is a plug-in that might help you, though. Check it out here: Locktastic
It doesn't say if its compatible with LR4, but you can try it to find out.
Plug-ins aren't usually as efficient as built-in functionality (like PM), but it might be a solution for you.

I am downloading from a Canon 650D to Photoshop CS5.1 AND Adobe Bridge CS5.1 do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?

I am downloading from a Canon 650d TO Photoshop CS5.1 and Adobe Bridge CS5.1 Do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?

Please check the list yourself and co,mare the necessary CR version with the one your version of Photoshop utilizes.
If the version os higher than yours you can use the free DNG Converter – as to how to use it please read up on that.
Camera Raw plug-in | Supported cameras

HT4101 I discovered a fatal flaw in the iPad procedure for downloading images from camera to iPad: after selecting the images to be downloaded, an accidental touch of the "delete" button, wipes all selected images from the camera, with no warning?

After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?

No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
I've loaded thousands of photos on my IPad and never have had that problem.
Don't blame a moment of carelessness on your device.
If you want to make such a suggestion to Apple use http://apple.com/feedback

Does iPhone Packager CS 5.5 support camera access and LOADING images from the camera roll?

Flash CS 5 only supports SAVING to the camera roll, not loading image from it. And it has no access to the camera to take pictures and access the image within the app.
Does Flash CS 5.5 do these things? There's no point in upgrading if it doesn't support these core feature that I need.

Hi.
Just got an app rejected because the popover to select the pics from the camera roll on the iPad always appears on to-left corner, and the arrow doesn't point anywere, and should be pointing to the button which activated it. That "does not comply with the Apple iOS Human Interface Guidelines, as required...". On the iPhone there's no issue because it takes over the whole screen. More from the apple rejection message:
"Specifically, we noticed your app contained popover elements that didn't point to the element that revealed them. To avoid user confusion, a popover element's arrow should point to the element that revealed it."
So, thanks for including the CameraRoll functionality, but it will be useless in the iPad apparently
Any workaround to make it appear at a specific place when calling myCameraRoll.browseForImage() ?
Fernando

IPhone SDK: Saving an image from the camera rotates it

When I use an image retrieved from the camera and try to save it to the disk, it always looks rotated -90 degrees. Anybody else have this problem? Or know what's going on? What's the easiest way to just rotate it 90 degrees?
<code>
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *writablePath = [[paths objectAtIndex:0] stringByAppendingString:@"/newImg.jpg"];
NSData * imageData = UIImageJPEGRepresentation([UIImage imageWithCGImage:cameraImage,1);
if (imageData != nil) {
[imageData writeToFile:writablePath atomically:NO];
</code>

Hi - I've found this post that might describe a similar (or same?) issue.
http://discussions.apple.com/thread.jspa?messageID=7936896&tstart=0
Hope that helps. You've gotten much farther than me - I'm still trying to figure out how to capture camera images using the SDK for a personal photo application. I couldn't find any mention of it in the UIImage Class Reference. Do you know where I might find docs on how to do it?
Thanks

Is there an app that lets me delete all images from the camera roll at once?

It is unbelievably ******** that apple doesn't offer an intuitive way of selecting all photos in the camera roll to facilitate deleting them. Is there an app that provides this funtionality?
Think about how common the task of deleting images can be... I take multiple pictures of a moment, object, scene etc because I know the focus will be wrong on a few and the colors or lighting will be different even for photos taken consecutively within a short period of time (because of differences in how the camera is held and other constantly changing variables.) I only want to keep one of the many photos I take and don't want to waste storage on the other bad pictures. Additionally I would prefer to not have them lingering around such that they can be forgotten and then inadvertantly shared or whatever.
If Apple won't do the right thing and add this functionality then I assume someone else has written an app and fixed it for them...so is my intution correct? And if so what is the name of this app?

The iPhoto app provides the capability to delete all the photos in the Camera Roll.
See https://itunes.apple.com/us/app/iphoto/id497786065?mt=8

Photo images from dig. cam [one is error and other won't open] questions

My wife inserted the sd card in the card reader and copied about 70 photo image files to the Mac. The camera that took all the 70 photos was a Panasonic DMC-LZ5 but I don't think the camera model matters much here.
For the first time, 2 of the many images seem to be corrupt. Mac X reports one photo image has an error while trying to open and reports the second image won't open.
My main concern is whether or not to just delete the two error/corrupt jpg images. My other main concern is that I don't want to keep the two images if it could affect or corrupt my hd or Mac system in some way.
I normally just trash corrupted files; however, in this case I went ahead and attempted to open both of the 2 troubled files myself later and they both opened up in Preview and didn't report any error or corruption. However, one of the jpg images defintely is corrupt when viewing it as the bottom of the image is definitely messed up. However, the other image now opens perfectly and looks fine to the eye as if nothing is wrong with it.
Here is a link to the one photo image that isn't quite right [note the obvious distortion at bottom of image]. Link is http://mysite.verizon.net/vzenvo78/question595.jpg
Further very relevant information: The SanDisk sd card that all the 70 images were on is a 1 gig card and the sd card seems to be a total loss. The sd card can't be initialized/formatted by disk utility and furthermore the sd card is no longer recognized by the Panasonic camera - the Panasonic camera won't even preview the images off the card or allow me to format the card even from the camera.

Hello,
I see what you are talking about. I just discovered this same exact problem on a friends G5 after he uploaded pics from his Leica.
This is what I did: I ran Disk Utility from the system restore disc to verify and repair the drive. DU reported Volume Bitmap problems. DU was able to repair the disc. Next, I created a new user account and tried uploading the images from the camera to the G5 and it worked just fine. The images loaded like they should.
I also reinstalled the drivers that came with the camera.
Delete any files that your Mac reports as a problem. It's just not worth leaving them on the drive.
So...... run Disk Utility from your system restore disc. If it reports errors, hopefully DU can repair them. If not, one option is to get DiskWarrior here:
www.alsoft.com or TechToolPro4 here: www.micromat.com
One other idea is how old is the card?
Next idea is to create a new user acccount: System Prefs/Accounts. Try using that account to upload the same images. See if they upload as they should. If they do, then the issue isn't system wide, it's just in the other user account.
Remember to always back up your images/audio/data often as you never know when you might need to do either an Archive or Erase and Reinstall.
Carolyn

After downloading from the camera can I delete from the camera?

I'm using Bridge CS3 to download images from my Canon XTi Digital Rebel. After download I would like to delete the image from the camera's storage disk.
I would like NOT to have to run the Canon's EOS utility to do this and would prefer doing it from within Bridge. But I can't find information regarding how to do this.
Using IMAC Leopard with SP.
Thanks,

This excerpt is from a long-gone post by the late, lamented author Bruce Fraser:
Bruce Fraser - 4:17pm Jun 14, 04 PST (#5 of 21)
Opening files directly from the camera is a bad idea for a variety of reasons*, and it most certainly isn't faster than using a FireWire or USB2 card reader.
         Drains the camera battery
         Runs the risk of the software you're using to open the images writing to the card and destroying the format
         Runs a small but significant risk of USB power frying the camera
         Slowest method known to mankind of getting images off a CF or SD card

I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put ab

I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdris

Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie

How to Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER in VC++ ?

Hi,
I have : - IMAQ1394 2.0.1
              - NI Vision 7.1
In VB, I can Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER :
    Dim Image0 As New CWIMAQImage
    imaq1394SnapCW(sid0,Image0)
    CWIMAQViewer1.Attach Image0
Now,How can I do this in VC++6.0?
    I tried:
              C_CWIMAQImage m_imgViewer1;
              m_imgViewer1 = m_CWIMAQVision1.CreateCWIMAQImage();
              m_CWIMAQViewer1.Attach(m_imgViewer1);
              imaq1394SnapCW(Sid,m_imgViewer1); <--there is no "imaq1394SnapCW "function in VC++,why?
    Please help me!
    Thank you!

For people looking back at these old posts regarding
CWIMAQViewer - it was not made to be used in the C environments and is made
for VB.
Refer to the following locations for displaying images in C
environments:
Start»All Programs»National Instruments»Vision»Documentation
Start»All
Programs»National Instruments»Vision»Text Based Examples
Make
sure that you look at the examples and documentation that is in
reference to the C environments not the VB environments
Vince M
Applications Engineer

Since I downloaded the latest PSE12 update, when I download images from my camera into Organizer on my iMac, the application freezes.

Since I installed the latest PSE12 update, when I download images from my camera into Organizer on my iMac, the application freezes. If I "force quit" then it seems to download them, but will do nothing else, including verifying and deleting the images from my camera. It worked fine prior to the update.

Dear Steve--
You are the man--a true Apple genius. Your suggestion worked.
Thanks you so much.
Charlie Jarowski

Does any1 hav issues with not being able to send pic from the camera roll. I've already had issues with over exposure that the new update fixed but it left me with this issue.

Since getting my iPhone 5 I've had camera issues. To start with it was over exposure, the camera was flashing too early and leaving me with dark pictures. After a failed reset I visited the apple store, where they told me it was a known problem and apple were working on a update to fix the issue and it was just a
waiting game. Once the update was available I did it immediately and the problem seemed to be fixed. I've now noticed that from the camera roll I carnt send a picture to mms. It gives me the option but the screen completely freezes after I've chosen it. The only way to access my camera roll again is to completely close the camera roll down and reopen it. The strange thing it it will let me send it as an email and upload taught to Facebook etc just not as an mms. The other strange thing is if I go to msgs and add a photo I'm successful but if I try to edit the photo I want to send 1st then I get the same issue as the camera roll. I also have issues with the shutter taking ages to open. Is anyone else havin these issue before I go back to the apple shop. A complete reset hasn't worked

Photo Stream only handles images and your videos are not uploaded or shared with other devices.
Use iPhoto to import from your device. It can bring in the videos and image files.

Sending Photos from the Camera App

So, I know for a fact that this existed in iOS 6, but it does not any more in iOS 7. I was just wondering if there was an option to put back the share button while viewing photos from the camera app? I used to use it all the time, but now, I have to go elsewhere and it makes more steps.
This image is from within the photos app. It has the share button on the left
This one is from the camera app in the photo viewer. It doesn't have the share button. any way to get it back?
Thanks

That's a feature they might add down the line, but I don't believe it is possible now.
I'm going to guess at their reasoning for it - if your phone is locked and someone else besides you gets ahold of it, do you really want them to be able to access not only your messages but also your social network?

Images from the camera

Similar Messages

Maybe you are looking for