Images in Amazon not loading after upgrade to 10.7.5

Hi, I am running 10.7.5 on a Macbook Intel Core 2 Duo (2007) - Images now do not appear to load in any browser (Safari, Chrome or Firefox) on Amazon. Images will however load on eBay for instance. Problem is recent and may be related to the 10.7.5 security upgrade installed last week. Anybody else seeing this issue or know of a solution? Thanks!

Restart your internet modem and wi-fi router if you use one then see if a browser will load images.

Similar Messages

Facebook images do not load after upgrading to 6.0. What to do?

After upgrading to Firefox 6.0 my Facebook images will not open. I see a white box with a frame but after clicking on it a totally black square opens up instead a photo. All is OK when using IE9. (Also, the same with Twitpics on Twitter.)

If images are missing then check that you aren't blocking images from some domains.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
* Check that images are enabled: Tools > Options > Content: [X] Load images automatically
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

[SOLVED] Modules not loaded after upgrade linux (3.9.5-1 - 3.11.6)

Hi. After upgrading the package linux from 3.9.5-1 to 3.11.6,
many modules such as wifi or psmouse are not loaded.
My PC is Asus Zenbook UX31E.
If I do by hand like
# modprobe ath9k
# modprobe psmouse
wifi and psmouse are OK,
but I want to set all necessary modules auto loaded.
* Output of lsmod of linux 3.9.5-1 was 87 rows
but lsmod of 3.11.6 (I attache below) is only 39 rows.
* Both
/etc/modprobe.d/
/etc/modules-load.d/
are empty on 3.9.5-1 and 3.11.6.
Please give me advice, thx.
Last edited by taro (2014-01-08 11:20:46)

Thx. The version numbers seem to be identical.
% uname -a [~]
Linux tenryu 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64 GNU/Linux
% pacman -Qi linux [~]
Name : linux
Version : 3.11.6-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.11.6
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 64493.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sat 19 Oct 2013 06:25:12 AM JST
Install Date : Fri 08 Nov 2013 12:06:17 PM JST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : None
best regards.

[solved] TV card not loaded after upgrade to kmod

After the upgrade to mkinitcpio and kmod replacing module-init-tools, my TV card (Hauppauge WinTV Nova-S) is not loaded.
Downgrading mkinitcpio and re-installing module-init-tools and regenerating my initramfs and all is well.
Is there any extra setup needed with kmod? There are no man files in the kmod package so I'm at a loss what to do.
Incase it helps, here are (maybe not all) the modules related to my tv card when downgraded:
-->lsmod | grep dvb
cx88_dvb 23415 39
cx88_vp3054_i2c 1932 1 cx88_dvb
videobuf_dvb 4794 1 cx88_dvb
dvb_core 92868 2 cx88_dvb,videobuf_dvb
cx8802 13121 1 cx88_dvb
cx88xx 73365 4 cx88_dvb,cx88_alsa,cx8800,cx8802
videobuf_dma_sg 7936 5 cx88_dvb,cx88_alsa,cx8800,cx8802,cx88xx
videobuf_core 15879 5 videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg
i2c_core 20492 15 isl6421,cx24123,wm8775,cx88_dvb,cx88_vp3054_i2c,cx8800,cx88xx,tveeprom,v4l2_common,videodev,i2c_piix4,nouveau,drm_kms_helper,drm,i2c_algo_bit
Last edited by fastfret79 (2012-01-10 22:29:35)

Yes - initramfs regenerated after each upgrade and downgrade.
Forgot to mention I was also suffering from the 'Filename too long' FS#27862 and your updated kmod in that bug's comments fixed that. I'm guessing that my issue is unrelated.
With both kmod packages, initramfs complains that /etc/modprobe.d/modprobe.conf doesn't exist, but I've never added anything in there anyway and the kmod package doesn't contain that file.
Last edited by fastfret79 (2012-01-10 11:53:07)

Images and video not loading after bridge

Hi guys. I followed this guide to put the NVG589 into bridge/passthough mode so I can use my Netgear N600 WNDR3700v2 router. Everything seems to be working fine, except with Facebook, Youtube and a few other sites. Images and video take forever to load (if at all). Everything I have read online suggests either changing to the Google DNS or turning IPv6 off. I am already using Google DNS and I already had IPv6 turned off on the Netgear. I have now turned IPv6 off in the NVG589 as well, yet the problem persists. As we have 30 days to test run AT&T interent, I still have my cable interent active (Suddenlink), so I can plug in the cable modem (SB6121), and everthing loads quickly on Facebook and Youtube. I plug in the NVG589, still not loading...so it's defintley something to do with the settings in the NVG589. Any idea? Thanks in advance.

Hi ,
I am sorry about the issues you are having with your U-verse service loading certain sites, but I will be glad to help. Are you having issues when it is not in bridge mode? Try resetting the U-verse gateway, and just connecting your Netgear to see if you are having the same problem. If so, try doing a direct connection to the gateway without the Netgear to see if the problem still persists.
Let us know how it goes.
-David T

POA HTTP Monitor not loading after upgrade

I'm working on a migration/upgrade from gw8 to gw2014, all of the agents show started in the admin console but the http monitor screen will not load. I initially had a bad path to a certificate and have removed the certificate and it's path, turned off ssl and restarted the POA.
I'm still getting this though, when I try to access the POA (non ssl)
GroupWise 2014 POA - PONAME
Status | Configuration | Environment | Log Files | Scheduled Events | MTP Status | Help
Web Console Access has been disabled due to error in loading SSL Certificate: [8209]
Any assistance is appreciated.
Dan

Hi Laura,
Yes I have checked the poa startup file and it looks fine. It was a fresh install of GW2014 so there is only one poa file and it's located in the post office directory as well. Interestingly, it's the monitor screen of the domain that shows this wrong information when I click on 'Links' and then the PO link listed there. When I look at monitor in the PO, any of the path data in there shows correct. So it makes me believe the problem is on info stored in the domain - but maybe I'm wrong. Also, mail goes out just fine, but it fails coming in because the domain drops it in the old location and the post office tries to pick it up in the new location.
Originally Posted by laurabuckley
Hi Dan,
Just a quick suggestion... Have you checked your POA startup file to see if it has the wrong path set in there? Look at the top of the file for the "home" path.
Let us know how it goes.
Cheers,

Itunes library not loading after upgrading

Please help: I had to upgrade my itunes when I plugged in my Iphone and now it won't sync. No matter what I plug in (Ipad, Ipad2, Iphone or Ipod) the only thing that happens is the Iphotos will pop up and recognize that I have plugged in my device, but the Itunes does not load and sync. I don't know if I did something wrong, put when it asked if I wanted to use Icloud I clicked no. I don't know if that is my problem now or what. If anyone can help, I would appreciate it, as I am lost!
Thanks, Debbie.

johnc86,
Are you following the instructions from this article in the Apple Knowledge Base, in particular the renaming of the .itl file from the Previous Libraries folder?

App Store will not load after upgrading to mac osx 10.7.2

Upgraded my MacBook Pro to 10.7.2 and now App Store will not present any information... seems to hang trying to connect to the store. This is just one symptom of issues after the upgrade... Outlook, Safari, KeyChain Access, etc all failing to load or to operate properly.

Install the OS X Lion Update 10.7.2 Client Combo
Then restart your Mac.
If you still have problems, you may need to repair the startup disk.
Use Lion Recovery to do that.

ITunes will not load after upgrade - says files missing

i got a prompt that my iTouch had new software for download. I went to download it and was prompted to download the latest version of iTunes first. I did this and now I can not access my iTunes. I get a prompt that iTunes cannot run because some of its required files are missing.
I am not sure what itunes version I had prevously but it was the latest version until I tried to upgrade. my itouch is version 4.1 (8b117). the itouch unit is a 2nd generaton. i am using windows 7 with IE 8.
Please help. what should i do now? I cant get into my iTunes to sync my iTouch
Thanks
Tim

I found out the issue with itunes. I had been using a converter program to convert movies for the itouch and the one I used also required a quicktime codec that must have interfered with itunes...I uninstalled the program...and itunes is back and running great. sorry to have rushed to judgement. Newfietom

Apps not loading after upgrade to lion

I upgraded to Lion and had no problems but now some programs won't load. They just bounce a couple of times on the dock and then go away. No error comes up or anything.

i tried re syncing... but still have a problem... what sync set-up should i use?

ITunes does not load after upgrading to 7.4.2!

Installed iTunes 7.4.2 just right now. When I try to start it, all it will do is quickly flash "iTunes" in the menu bar without starting; sometimes not even that will occur. I opened the Activity Monitor to watch the app; iTunes does appear to start when I double-click by showing up in the monitor; however, after a few seconds it disappears.
Anybody know what's going on?

Do you have QuickTime 7.2 installed from the Apple website?
Make sure to remove any "hackies", betas, and ShapeShifter, if installed.
Go to /Library/Receipts/drag iTunesX.pkg to the trash and empty.
Repair permissions ..... RESTART
Reinstall iTunes 7.4.2 (Mac) from the Apple website +without performing any other processes during the download or install!+
Repair Permissions
DIXIE

Aperture not loading after upgrade to 10.5.8

Have just upgraded to 10.5.8 on my MacBook Pro and when I go to start Aperture, it just says the application has quit unexpectedly. What gives? Everything was humming along with the previous OS that I had.
I did the same installation on my iMac a few months back and had no issues.
Help please!
C

Hi Frank,
Thanks for getting back to me. So the stroy so far. I have upgraded/installed Snow Leopard OS and then upgraded to Aperture 3 from 1.5.
Aperture is now asking me for the licensing serial number, I have both the original and the A3 upgrade. I punched in the upgrade serial unmber and it did not like that and asked for the original. I punched that in (straight off the Apple packaging that says 'Product Serial Number') and it has now come up with an alert saying " The serial number you entered is no valid" - What's going on?
This stuff reminds me of my days with Windows!!!!
If you can help I'd be grateful.
C

App store not loading after upgrade to 10.8.2

App store won't mount AT ALL, says 'need intenet connection', which I have.
I used the app store to GET mountain lion adn now it no longer works

I thought all that "hostconfig" stuff was supposed to be removed from the OS.
Anyway, regarding your memory problem, don't be surprised if it comes back again erratically. I found this link tonight about Mountain Lion problems:
http://scsc-online.com/How-To.html
Click on the little icon to the left of the write up for the document. They talk about a bug that seems to crop up and eat up all memory. It does it erratically. I thought they were talking about Safari, but maybe it has something to do with memory.
It sounds like a memory leak to me.
In any case, at least you got Spotlight working again.

GarageBand is not launching after upgrading

GarageBand is not launching after upgrading to OS 10.8.4
How to fix it?
Thank you.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Usb hard drive not loading after security update

usb hard drive not loading after security update
I can't seem to find any other posts about this problem.
I have three external hard rives connect by a USB hub to my iMac.
Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly.
I get the same issue but not all the time if I turn them on before I boot the iMac.
I used the disk drive utility to "repair" the drives but they always come back as "probably ok".
If I restart the iMac with the drives connected (on), it seems to work but not all the time.
A bit annoying as I am wondering if the drives are OK or not.
I don't always need the drives as they are for backing up images from my camera using Apreture.
This all began after i did the latest security update.
is the update to blame?
mahalo.

Yes, you can still use those instructions to reset the PRAM.
You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

Images in Amazon not loading after upgrade to 10.7.5

Similar Messages

Maybe you are looking for