Images in loupe view of library module of LR4 are not always focusing. Why?
Have just upgraded my whole system to get LR4 to work at an acceptable speed- including 16gb ram, 1TB hard disc. When importing RAW images are copying them to DNG and doing 1:1 prewiew at that time. After finishing working in the develop module when I try to look at the images in loupe view in library module many of the images remain unfocused- If i export as jpeg to hard disc they are fine.I need to be able to view ,rate and select images in LR
Sound like this bug Mark? http://feedback.photoshop.com/photoshop_family/topics/lightroom_4_3_bug_pixelized_image_pr eview
Similar Messages
-
In Lightroom 5.7.1 on Mac OX X Yosemite, when in the Library module, in Grid View the option to Email photo is available; however, when in the Loupe View, the Email Photo menu option is greyed out. I have seen this question posted on the web and there are no answers anywhere. Please address this issue as soon as possible since this appears to bug.
Hey Scott,
After expermienting extensively (well relatively speaking), I found that hardware wise, there needs to be a AC3 decoder on the end where the audio is being sent. And without that chip there the AC3 option won't work weather or not you can get it showing. Our interfaces don't have this AC3 option so theoretically speaking we would have to create/purchase an AC3 to Analogue converter, and take the outs to our monitors/inputs of our interfaces. There seems to be no easy hardware or software work around, because even if the software workaround were to get the AC3 option available it seems that it sends the AC3 option out over the SPDIF/ADAT connection meaning the software didn't really convert it it just made it possible to send the signal. So I didn't have any luck. In the end it seems you need a AC3 decoder/DA converter to 5.1 out which they sell but not at a reasonable price. Hope I was of "informative" assistance, if not any actual help towards solving the problem.
-Walter -
When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)
Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go. -
Itunes was reinstalled on my MacAir and in the process my playlists disapeared. How can I sync theses playlists which are still on my Ipod back to the iTunes library? PS: these are not purchased from iTunes, they are my own cd's.Thanks.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
I downloaded iOS 7 and now in my music library all my songs are not in the order of the original albums. How do I get them back into order?
go to settings>general>reset>reset home screen layout and see if they appear.
-
Preview Panel Appears Brighter than Loupe View In Develop Module
Settings and Hardware:
- Macintosh 15" Power Book G4
- Lightroom Version 2.1
- Attached Apple Cinema Display
- Mac OSX 10.4.11
When viewing Lightroom on the PowerBook monitor all is well and the Preview Pane shows the same brightness value. Yet when the Lightroom interface is brought over to the Cinema Display the Preview pane in the Develop Module is significantly brighter than the main image in the Loupe View.
Any help with getting the value of the Preview Pane to the same brightness value of the Loupe view would be of help. Or if there is a simple explanation as to why this happens, that would also be appreciated.
Cheers,
Jarrod.Monitors should be calibrated at around 120 cd/m2. This is usualy around 2/3 brightness for Cinema displays and around 4 to 5 clicks back from maximum on a mac book Pro. If you don't, you'll think all your prints are far too dark.
>being a different luminance than the loupe view image on the same monitor
huh? I thought you were comparing between monitors?
Lightroom might not realize that you moved the entire interface to a different monitor and use the wrong profile or it forgets to use the different profile for the preview. This is very common even in managed apps. Lightroom does have a nice dual monitor interface now that uses the correct profiles for both monitors, but I don't think it likes the main window being dragged over. -
Survey view in Library module is unfair
Whenever I'm using survey view in the Library module to select a few photos, and I'm having photos of both landscape and portrait orientation, either one of them is displayed considerably smaller than the other.
I think it would be nice if both orientations were displayed the same size, like in grid view, because when I select from a collection of photos, I slightly tend to favor photos that are bigger.
MarcTrue.
-
Image Library select/deselect ticks are not visible
Hi,
We are using Sharepoint 2013 (version
15.0.4569.1000). We have select/deselect ticks at list views but in image library list view, they are not visible. When List view page loaded there is a script error as below:
"Uncaught ReferenceError: InitImglibView is not defined".
I can't find the reason of this error. Can you help please?
Deniz ErThanks for the reply. Yes, i mean it. But i change the style as "Basic Table" from "Modify View" options. Screenshot is below
When i change the style from "Default" to "Basic Table", ticks are getting lost.
Deniz Er -
How to create a view for all Service Requests that are not approved by reviewer
Hallo,
I want to create a view in the Service Requests library that shows all SRs that are not approved. How to configure condition that says: if a SR has related Review Activity which is In Progress, show that SRs?
I couldn't find this when creating the view. Thank you.So here's the first problem with that: Which review activity? a SR can contain multiple RAs, so how do we decide if an arbitrary SR is approved or not?
As to the specific language you use (Any child RA is In Progress) you might want to look at the criteria from the default Change approval view, which does something similar:
<QueryCriteria Adapter="omsdk://Adapters/Criteria" xmlns="http://tempuri.org/Criteria.xsd">
<Criteria>
<FreeformCriteria>
<Freeform>
<Criteria xmlns="http://Microsoft.EnterpriseManagement.Core.Criteria/">
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpressionLeft>
<Property>$Context/Path[Relationship='CoreActivity!System.WorkItemContainsActivity' TypeConstraint='CoreActivity!System.WorkItem.Activity.ReviewActivity']/Property[Type='CoreActivity!System.WorkItem.Activity']/Status$</Property>
</ValueExpressionLeft>
<Operator>Equal</Operator>
<ValueExpressionRight>
<Value>$MPElement[Name="CoreActivity!ActivityStatusEnum.Active"]$</Value>
</ValueExpressionRight>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpressionLeft>
<Property>$Context/Property[Type='CoreChange!System.WorkItem.ChangeRequest']/Status$</Property>
</ValueExpressionLeft>
<Operator>Equal</Operator>
<ValueExpressionRight>
<Value>$MPElement[Name="CoreChange!ChangeStatusEnum.InProgress"]$</Value>
</ValueExpressionRight>
</SimpleExpression>
</Expression>
</And>
</Expression>
</Criteria>
</Freeform>
</FreeformCriteria>
</Criteria>
</QueryCriteria>
This is a simple AND criteria with two componets. one looking for a Review Activity (TypeConstraint='CoreActivity!System.WorkItem.Activity.ReviewActivity') which is related to the targetting CR by Contains Activity ($Context/Path[Relationship='CoreActivity!System.WorkItemContainsActivity';
Context in this... context means the CR targeted by the view) where it's status (/Property[Type='CoreActivity!System.WorkItem.Activity']/Status$) is In Progress ($MPElement[Name="CoreActivity!ActivityStatusEnum.Active"]$). The other is filtering
for the target change request's status ( $Context/Property[Type='CoreChange!System.WorkItem.ChangeRequest']/Status$) is In Progress ($MPElement[Name="CoreChange!ChangeStatusEnum.InProgress"]$).
You could convert the second criteria to point to SRs and SR status values, and then use the similar text for the first criteria. i'd recommend
Anton's Advanced View Editor (or
the free version) to do the criteria adjustment. -
Create Materialized View ORA-01723: zero-length columns are not allowed
I am trying to create a materialized view which derives a column from a function and I get: ORA-01723: zero-length columns are not allowed.
I am using 10gR2 with the following definition (simple version):
CREATE MATERIALIZED VIEW AS
SELECT
function_name(column_name) COLUMN_ALIAS
FROM table_name;
I have even tried to cast it like below:
CREATE MATERIALIZED VIEW AS
SELECT
CAST(function_name(column_name) AS VARCHAR2(200)) COLUMN_ALIAS
FROM table_name;
My function does have an exception to return a value even if no values are found.
I have looked all over for the solution. Does anyone have a way around this issue? I really need my function to derive the column as it has business rules which I cannot join into my materialized view definition. My only hope around this is to insert the values into a table and then create a materialized view from that table, I don't want to do that if someone has a solution around this.
Any help would be greatly appreciated.
Thank you,
Kyle
Edited by: Kyle Miller on Apr 19, 2011 8:28 AMHave you tried creating a table with the correct structure and then creating the materialized view based on the prebuilt table as described here...
http://www.oaktable.net/content/ultra-fast-mv-alteration-using-prebuilt-table-option
Cheers
Ben -
The "view" buttons in the showcase page are not visible in iPad, iPhone and Android device
I was trying to test the demo in the showcase page (http://html.adobe.com/edge/animate/showcase.html) in my iPad, iPhone and HTC device. None of them has the "view" button visible, so I cannot check the demo at all. Do you encounter the same issue? Any thoughts?
thanks,
WenlongHi Elaine,
Yes, I understand! Actually we have tested the previous examples last month before the new release! In general they were working fine but with some bugs in the mobile devices.
Is there any possibility we could test some live examples via mobile devices?
In the past years we have heavily relied on flash tools. With the rapid growth of the usage of tablets and smart phones in our business, we will have to get rid of flash tools as soon as possible. We are in the phase to select and test new development environment intensively. Unfortunately I have aleady shared the same link with many of my colleagues for testing (didn't realize that they are not working any more). Any suggestion would be great!
Thanks,
Wenlong -
I prefer to print from PSE as this allows me to set picture dimensions. Windows photo viewer does not give this flexibility. I am using the same PC, the same printer and the same print file, yet the outcome from each software option is significantly different. WPV is sharp and bright whereas PSE is softer. Can any one help me?
I prefer to print from PSE as this allows me to set picture dimensions. Windows photo viewer does not give this flexibility. I am using the same PC, the same printer and the same print file, yet the outcome from each software option is significantly different. WPV is sharp and bright whereas PSE is softer. Can any one help me?
-
Why does my iPhone volume ringer icon come on by itself, the volume gets turned down on its own then the icon stays on and blocks my view. It also will at any time make any screen switch to large pictures that I can only see a small portion of screen at a time. I have tried too tap screen to make it go back to normal and nothing happens. I then try to turn it off. After several tries I am successful Its hard slide power off button because only a small section is showing. What is happening? How do I fix this?
Unfortunately this is probably a hardware issue and you will need to take it to an Apple Store.
-
My custom ringtones don't show up in my iTunes library (only on my iPhone library) so I'm afraid that if I sync to the new computer I'll lose my tones. I've tried backing up on my computer, but then I can't find that information to bring into iTunes. I've tried backing up to the Cloud, but it requires me purchasing more space (which I don't want to do). I've already turned off most of my apps, but I'm still over the limit.
See also Recover your iTunes library from your iPod or iOS device.
tt2 -
IMovie: Event Library Disappears and Projects are Not Editable...
Was in the middle of editing an iMovie project when it froze.
Restarted the application and now there is no list under Project Library, and I can't click on the Event Library.
I can see that the video is still there because it plays when I hit the spacebar but I can't edit any video components or export it.
Have tried restarting, installing updates, etc but no luck.Delete (trash) iMovie's preference file. First, close iMovie then in Finder go to your user (home) folder Library>Preferences and locate the file named "com.apple.iMovie8.plist". Drag this file to the Trash. When next opened, iMovie will create a new preference file with the default settings.
You may need to change some settings to suit your own preference. To do this, in iMovie go to the menu item iMove>Preferences and if desired change any settings under each of the 4 tabs.
John
Maybe you are looking for
-
how do i transfur itunes from one computer to another and use new computer only as main one
-
Weird track icon appearing in Logic 9
A weird track icon has appeared in my version of Logic 9. It's on several tracks in a current project and I don't know what it is or how it got there (I can't see it in Logic's chart of track icons anyway, and I've certainly not imported any). If I h
-
After a recent Adobe update, CS6 will not run on my OSX 10.8
The icon appears disabled. When selecting the app I get the error msg: "You can't open the application "Adobe Photoshop CW6.app" because it is not supported on this type of Mac. CS6 worked fine after upgrading to Mountain Lion. It appears an upd
-
ODI: Using Date in Variable - Suggestion
Hi, I have created a refresh variable - DAY with following code: Select TO_CHAR(sysdate,'MM/DD/YYYY') from dual Variable datatype - Alphanumeric Now I am using the siame variable as evaluate variable in a package. The Evaluation condition is also the
-
Upgrading to Aperture 3, my Aperture 2 library got smaller (60GB vs. 102GB)
Moving from an old MacBook Pro running Aperture 2.1.4 to a new MacBook Pro, with Aperture 3.1. I copied the Aperture 2 Library (55,000 images, nearly all referenced) to the new machine, and opened it in Aperture 3.1, which then upgraded my Library (o