Images in my fla. have turned red

hi - i've just opened my fla file and most of the images have turned red. Any ideas?
Cheers
Rick

Yes, Ned is correct. The original link to the image has been deleted.
@ Stubbed Toe, which version of Flash were you running? Did you rename the image, move folder with image inside, or rename folder?
Thanks,
Quynh
Flash Authoring, QE

Similar Messages

  • Files have turned red

    I've just upgraded to 09 and every page on iWeb has turned red, on both of my computers. I have tried uploading twice to MobileMe. Both times, after an hour or more, I'm told that the site can't be uploaded at this time.
    Has this happened to others, I wonder? And does anyone have a solution please?

    None of the suggestions offered here, while definitely worth trying, have helped me. Installing & launching iWeb 3/'09 instantly caused all pages and sites to go red, forcing me to re-publish everything.
    Why a version upgrade would force a complete republishing of one's entire site seems odd, but the bigger problem for me is that MobileMe seems to refuse to take the re-pub attempt, failing with a different error message regarding a different file every time since Tuesday evening. Not a single one of these files, nor the site in general, gave me any problems under iWeb 2/'08 or prior to Tuesday evening.
    The net effect is that my site has been dead for three days, and some part of this equation -- either MobileMe or iWeb 3/'09 -- is rendering it impossible for me to resurrect it.
    I did get a small, 1-page, new site to publish last night, but the prospect of having to break down a previously trouble-free blog into tiny, bite-sized chunks is ridiculous. This is not a huge Domain file we're talking about, and no single file is over 2.4MB (an MP3).
    I would welcome any suggestions that go beyond basic troubleshooting and address the real, persistent problems that many people here are seeing with iWeb 3/'09 and MobileMe since upgrading.

  • All iWeb files have turned red

    I have just made a small page to my site and attempted to load it to MM. It was taking a very long time, so I quit and opened iWeb again to load the page from fresh (this usually speeds up a slow load) only to find that every one of my files has suddenly turned red, which means that I have to load the whole lot - an even slower process, if it works (it doesn't always, I find).
    Any idea why the files should go red, and has this happened to anyone else?

    This seems to be "normal" behavior for '09 but not '08.
    Because you quit during an upload, all the pages have not been transfered so iWeb is "seeing" them all as being new.
    You'll just have to try to get them all to upload and then see if it will go back to "normal" behavior.

  • All roles suddently turned red!

    Hi there
    Please tell me what goes wrong... Today we found out that all our roles have turned red. The authorisation and user tabs have red light in all roles, and they are not generated. Alot of new values (with status "new") have come in, e.g. more than 20 new entries found under PLOG, P_ORGIN was brough in although we should be using the context solution. This gotta be something to do with some activation in SU24. User comparison doesn't help in this case. Do we need to manually go through each role to make the fixing, or is there a better way? What is the reason causing this?
    Not sure I should call this a lucky thing still, it happens only in our test client.

    >
    Theoz wrote:
    > Hi there
    >
    > Please tell me what goes wrong... Today we found out that all our roles have turned red. The authorisation and user tabs have red light in all roles, and they are not generated. Alot of new values (with status "new") have come in, e.g. more than 20 new entries found under PLOG, P_ORGIN was brough in although we should be using the context solution. This gotta be something to do with some activation in SU24. User comparison doesn't help in this case. Do we need to manually go through each role to make the fixing, or is there a better way? What is the reason causing this?
    >
    > Not sure I should call this a lucky thing still, it happens only in our test client.
    User tab on red can be normal if there are no users assigned.  The auth tab on red is definitely a bad thing.  In the auth tab it should tell you who made the last update.
    SU24 will not cause this problem.  I update SU24 like white on rice but it will not make changes to any roles till I PFCG with expert gen.
    Are your roles SAP delivered roles?

  • The images imported to my stage turn up as blank and render every image previous to the rogue imported image as red squares that fill the perimeters of the image which then renders the publishing and scene testing features in flash useless, what can i do

    I have been working on animating a scene in flash for a few weeks and recently I have encountered a problem with importing my images on to the stage where the images I import do not turn up, however the key frame that I attempted to import the image onto shows that it is occupied by an image and every frame previous to the key frame that just imported an image that does not show turns up as a red square that fills the original perimeters of the image, there is no solution to this problem any where on the forum and the adobe technical support staff will not help me find a solution to this problem what can I do to get Flash running normally again and fix this problem?????
    Also after the first time i publish a preview after i begin using flash, flash renders the publishing and scene testing features as useless and claims that there is no HTML template found, or if the images if i import any images onto the stage that come up blank and render every image previous to that image as a red square and then try and publish a preview  flash renders the publishing and scene testing features as useless and claims that there is no HTML template found. What can I do to fix this problem??? there is no solution on the web anywhere to this problem either.

    I don't know if Flash has a memory limit of its own. The memory for your Flash file is based on the available memory on your computer.
    There is a limit on the number of frames that you can have in any given timeline. I think that it's about 15000 frames, but that's a guess. Flash does all of its work at runtime, this means that no part of your animation is pre-compiled like it is in a video file. So the more objects that you have on the stage, the more work Flash has to do. It follows that the more objects that there are to animate, the more work your processor and the video card have to do.
    Here's a list of articles on memory management that might be useful:
    Garbage collection internals for Flash Player and Adobe AIR | AdobeDeveloper Connection
    actionscript 3 - What are good memory management techniques in Flash/as3 - Stack Overflow
    AS3 Memory Management Tips

  • Why are my scanned images turning red when put in a slideshow or iMovie?

    Why are my photos turning red when put in a slideshow?

    Can you start a new document and then load one of the duotones known to be good in the working file and have it correct? If so, try one of the duotones known to be bad in the working document in the new file. Does it work?
    If no to either suggestion, can you share one of the images known to be good and one known to be bad? ZIP 'em up and upload to dropbox and plop a link here. Or, to keep the file sizes down, you can quickly make a new set and provide those.
    As well, the ID version and OS info would probably be helpful.
    Take care, Mike

  • Image turns red when trying to add text?

    I'm using CS5 64 bit on a Win7 64-bit machine, with 8GB RAM.
    I have been creating images, then adding text to them, with no problem. All of a sudden, something is going wrong.
    I have created an image out of a white background with green text. I saved it as a .psd
    Later, I opened it in CS5, and clicked the Text tool. I put the cursor on the image, and the whole image box turned red.
    All the options under Layer (like New or Duplicate) are grayed out.
    The Layers box shows just one layer, named Index. Right clicking on that shows all grayed out options.
    I also tried to add text to a previously saved .jpg with the same result.
    If I make a new image, I can add text correctly.
    And I can also add text to other .jpgs I've made previously.
    So apparently it is something to do with the way these particular files were saved or something?
    I tried resetting the Text tool but that did no good.
    What am I doing wrong? What makes these images different?
    I tried to upload the .psd image in question, but I got an error message saying that "the content type of this image is not allowed".
    Thanks!

    If you want to post a large image or one of a format that isn't supported by direct attachment here, here's a suggestion:
    Go to YouSendIt.com.
    Create a free account.
    Upload and send the image to yourself.
    When you get the URL, post it here.
    -Noel

  • How many Liquid Indicators have to turn red/pink to loose the guarantee?

    So my power button on my Iphone 4S is not working. I went to the official service point, and they said they cant change it even thou the guarantee is still on, because the jack Liquid Indicator it red/pink (while the dock connector one is white). So my question is: how many Liquid Indicators have to turn red/pink to loose the guarantee? Can i demand them to check all 4 sensors, and then give me a new phone?

    And it's absolutely not true that all four indicatores have to be triggered. I don't work for Apple, but I used to work for a self-servicing account and had access to Apple's troubleshooting documentation for the iPhone and it clearly stated that any indicator being triggered was sufficient evidence for invalidating the warranty. And again, an Apple technician just has to see evidence of liquid infiltration; no indicator needs to be triggered at all, though such a trigger is considered absolute proof.

  • I have iMovie HD 2004 and when i try to apply effects to my video clip, the clip turns red. WHY? HEEELLLPPP!

    I am trying to compile a cute little movie for my boyfriend and everything was going fine until I applied an effect to one of my video clips. I tried to apply the "vintage film" effect and the video clip turned red. I undid that effect and tried 3 other effect and the same thing happened. Red clips... :/ whhhyyy? someone help me? I'm poor and I haven't been able to upgrade my very old iBook (2004), so i have the old version of iMovie HD...Can somebody help me? pleeeeeease?

    diegogo
    Irregardless of the Premiere Elements version...
    I do not believe you are doing anything wrong. I have not found it possible to copy a Timeline clip to which Time Remapping has been applied and use Paste Effects and Adjustments to other selected clips on the Timeline to achieve the same fast or slow motion for more than one clip at a time. For one thing the duration of the Time Remapped clip is different than those that have not gone through Time Remapping.
    And, you cannot select more than 1 clip at a time to be taken into the Time Remapping workspace.
    Also, special considerations need to exist for Pan and Zoom Tool for its pan and zoom effect applied to more than one photo at a time.
    ATR Premiere Elements Troubleshooting: PE11: Pan & Zoom Tool, More Than One Photo at a Time
    I will think about this some more. But, at this moment, it appear to be it is what it is.
    ATR

  • HT3275 I have a red "i" message - The backup disk image "/Volumes/_________'s Time Cap/Macintosh.sparsebundle" is already in use.  Any idea how to fix this?

    I have a red "i" message - The backup disk image “/Volumes/_________’s Time Cap/Macintosh.sparsebundle” is already in use.
    Any idea how to fix this?

    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    This simple reset will fix this issue 98% of the time. If you are in the unlucky 2% category, more help is here:
    The Backup disk image ... sparsebundle ... is already in use.

  • TS2755 I only have a problem with one contact...whenever selected the contact turns red

    One of my contacts that I have used continuously in the past now turns red when selected and will not allow me to sent a message

    Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
    Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
    There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
    Sent from Cisco Technical Support iPhone App

  • I have a red question mark over my images why is that?

    I have a red question mark over my images why is that?

    Thanks Bob, as you can see I'm a beginner.

  • Why is a single Cross Reference text turning red after doing an Update?

    After updating a large book in FrameMaker10,  the same cross-reference made in  a couple of chapters is turning to red text.   It is  set as  Heading 2.  I tried to deleted the heading and re-typing it.  I tried to change the style to Body and back to Heading 2 but all references to it are turning to red text after I update the book.  Any idea what is wrong and how do I fix it? I am using unstructured version.  See image.

    Apply a Character Format of Default ¶ Font. Then re-apply the desired Paragraph Format. If the red goes away, it was either a Character Format that had been applied or a local color override. If the red is still there ...
    Look at the Special > Cross-Reference > Format > Definition itself. Look for any <character-format-name> and see if any of those have a red Color defined in their Format > Character > Designer. If so, remove that building block from the definition [Change] [Done] [Replace].

  • Graphics turning Red or Black after a while for no apparent reason?

    For some reason every time I import graphics to the library they are fine. But when I put them on the stage (there's about 30 of them in each of different keyframes) they seem to be replaced by black or red rectangles. In the library, they are fine, and when I export them as a .MOV they are sometimes fine. If I export them as an .AVI, however, they remain red and black. It's not all of the graphics, but the longer that I am in Flash, the more of them turn red.
    I can't tell if it's one corrupt file or a corrupt installation, but it's been on three computers: a terrible laptop with Windows 7, a Mac, and a modern desktop with Windows 8.
    Can anyone fill me in on what might be the cause or possible solutions? (or ways to diagnose it?)

    My best guess is that you're somehow bumping up against a size limit like this Size limits | SWF, bitmap files | Flash Player 10. I know you're not using the Flash Player, but it's possible that since that limit is known there are limitations in the IDE that are related to it. Have you tried splitting your images into smaller pieces and combining several in the same Graphic symbol?

  • Imported SWF background turns red (CP4)

    Hey, guys.
    I'm working on an e-learning project which requires me to embed an interactive swf file in my Captivate project.
    It all works out fine except that the background of the swf turns red. I have tried a few things with the embedded swf in my attempts to make it work.
    1. I placed a white box below all other elements. It did not work.
    2. Turned the box into a movie clip. It did not work.
    3. I noticed that the embedded image elements kept their backgrounds so I made a white png image and place it below all other elements. No change.
    Please see the attached image. If anyone have any idea of what may cause this and how to solve the problem, please share!

    Hi there
    Does it begin by displaying some red blocks, then continue until the whole screen turns red and it remains that way? If so, you are likely seeing memory exhausted. Otherwise known as the "Red Screen Of Death". If that's the case, I'm guessing there is a lot of Full Motion Video clips?
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

Maybe you are looking for