Images in the folders of an external file system KM

Hello,
We are facing a problem in our KM, the thing is We have created a external file system in our KM, it is green and almost everythings is working fine... In the CM repository we have assigned the "properties" as a repository services, but in the setting of our folders we can not see the tab of rendering within the properties.
This is our problem without this tab of rendering We can not assign a image for this folder .. And We need to assign imaged to the folders.
Does anyone know whether we need to add new repository sevices to our file system ? or it is impossible to assign an image to a folder in a external file system within the knowledge management.
Thanks in advance.
OLAF

We have found the reason why we did not have the rendering option for assign images to the folder in a external repository.
Our guess was good, We should have added a new "repository services" called "layout service".
Thanks for reading this.

Similar Messages

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

[solved] scritpt to check the used space of different file systems

how to write a scritpt to check the used space of different file systems and print if any file system above 50%
I used this command to get the different filesystem and their used space
df -h | grep -v Filesystem |tr -s " " | cut -d" " -f1,5
Thanks in Advance

Please try this command:
df -Ph | tr -s " " | cut -d" " -f1,5 | sed -n "s/$[5-6][0-9]%$\|$[0-9]\{3\}%$/&/p"
It works for me. Good luck
Tiger Zhang
.

When I try to load an image from the scanner, or from a file, into a bank deposit script, I get a message - "Error Java heap space". Need help to diagnose and fix this problem.

I am running a script from my banking facility which asks me to load an image of the front and back of the check. I never had a problem before, but this time when I try to load the images either directly from the scanner, or from previously saved jpg files I get an error window message that says - Error Java heap space,
Ed Marcato

I am running a script from my banking facility which asks me to load an image of the front and back of the check. I never had a problem before, but this time when I try to load the images either directly from the scanner, or from previously saved jpg files I get an error window message that says - Error Java heap space,
Ed Marcato

Adding Images to the folders

Hello All,
Kindly let me know how I can attach an image to the Content Management folder and show the image along with the folder name on the portal? Do I have to use different UI?
Any Ideas or suggestion. I wanted the way just like http://service.sap.com homepage with images.
Regards,
Praveen

Hi Preveen,
the "Entrypoint Exlorer" layoutset came in SP2 with Patch5. I think you can create yourself such a layout set in KM configuration.
For this do the following:
1. Create a Collection Renderer: Configuration -> Content Management -> User Interface -> Settings -> Collection Renderer Settings -> New
Use the following settings (some parameters might not exist in your SP version):
Name                    EntrypointsCollectionGridRenderer
Description               The entrypoint categories renderer
Collection Renderer          CollectionGridRenderer
Breadcrumb Visibility Style     invisible
Width Adjustment Mode           standard
Height Adjustment Mode          compact
Number of Rows               5
Row Spacing               15
Number of Columns          3
Column Spacing               15
Column Spacing Mode          minimum
Property for Sorting          no_sorting
Vertical Alignment          standard
2. Create a Resource Renderer: Configuration -> Content Management -> User Interface -> Settings -> Resource Renderer Settings -> New
Use the following settings (some parameters might not exist in your SP version):
Name                    EntrypointsResourceRenderer
Description               Resource renderer for entrypoint categories
Resource Renderer          ResourceRenderer
Image Width               48
Image Height               48
Image Setting               replace
Primary Text Style          HEADER2
Secondary Text Style          LEGEND
Child Folders' Style          off
Visible Properties          rnd:image(alignLeft/[1-2;1]/contentLink/space-right=10),rnd:displayname([1;2]/alignLeft/alignTop/contentLink),description(useLinkData/alignLeft/alignTop)
Command Display               off
Resource Command Group          Not set
Folder Command Group          Not set
Link Command Group          Not set
3. Create a Resource Renderer: Configuration -> Content Management -> User Interface -> Settings -> Layout Set -> New
Use the following settings (some parameters might not exist in your SP version):
Name                    EntrypointsExplorer
Description               The entrypoint categories layout set
Enabled for presentation settings     YES
Layout Controller          SimpleLayoutController
Collection Renderer           EntrypointsCollectionGridRenderer
Resource Renderer           EntrypointsResourceRenderer
Commands for the details menu     Not set
Now, you should have an 'Entrypoints Explorer' LayoutSet to choose from, so you can follow my first post.
Best regards,
Robert

How to refresh the content of an external file

Hi guys.
I need to use an external file, no matter the extension(txt .xls .xml .mdb .csv) in the oracle BI rpd.
I Use this file like a center table in my star schema and this file need to refresh frequently.
How i can see, dynamically, the changes in the file without restart the services?I've tried by Answer to see all the record in the file, but if i change the file content and after, by answer, try to see the content.... it's the same as first!
I can do something to overcome this problem? or i have to use external table??
Thanks in advance.
Best reguards

It seems to me that you are trying to reinvent the wheel here. Having the BI Server load a 100,000 rows file is nto a good idea. The BI Server is not an ETL tool. While I could see why you may want to refresh the file frequently a better process would be to load it using standard ETL tools, create indexes etc and the move it to current table for OBIEE to see. You can use the OBIEE's Event Polling to clear the cache. Another simpler option if you are using an Oracle database is to use external tables. External tables allow you to define a table in an Oracle database that it's source is a text file. Google it and you will plenty of samples.

Folders not appearing in file system

Ok, so here is my issue. I have a law firm that asked me to set up a simple backup script for their network drive... back up all their case files to external hard drives. The network is mostly Windows XP computers with one Windows 7 computer.
The share drive is on a windows XP computer that I don't have direct access to normally (Its the attorney's office computer and it is rarely available to work on during the regular business day, which is the only time I have to work). So, I created
a batch file, which is left on the backup drives, to xcopy the files through a symbolically linked directory on the C drive. I did that so I could set the same symbolic directory on all the computers and the script will work regardless of which computer
they are plugged into.
So, my script runs xcopy with the /d /v /y /e flags, plus an exclusion file excluding random things like $RECYCLE.BIN and /RECYCLER/. Because a lot of the computers are XP, robocopy wasn't an option. Regardless, I found that running robocopy
created the same problem anyway.
After copying everything over, the file system stops recognizing the backup directory. My batch file is still there. The exclusion text file is still there. The Backup directory, however, just vanishes. It almost like its hidden,
but it doesn't show up when hidden files and directory are shown and, in the CLI, dir /ah doesn't pick it up either. It is there though... trying to create another "Backup" directory at that location is rejected and, if I remember where things
are, I can still cd into the directory structure. I have tried restarting the external hardrive. I've tried rebooting the computer. I've tried refreshing the explorer. Nothing works. If I copy the files over, the directory that
I copy them to just stops being recognized... every single time. Not sure if it matters, but I formatted the hard drives to NTFS. So, any ideas?
As a side note... $300 for tech support? Really? What I'm doing is really basic and simple, and I'm not using anything that isn't integral to your software... xcopy. You want me to pay $300 to report and fix bugs that are either in a fundamental
component of your own command line application suite or with the compatibility of your file system? "Lets get them to pay for something that doesn't work and then make them pay us to fix it!" That is blatantly unethical. In any
other industry it wouldn't even come close to being legit. If you paid a plumber to install piping in your house, and then your house flooded right after you turned the water on, is it reasonable to have to pay him again to fix the problems that he caused?
Nobody would tolerate it... but somehow its a standard practice here. Your solution is "Either pay us, or get the community of other users to help you". There is a good reason why my entire business (not the law firm, but my business)
runs on Linux and other open source software. If we are being told to "fix it yourselves" anyway, then I at least want access to the source code so I can. Seriously... I hate it when I have to come here to correct issues with MS overpriced,
bloated, proprietary POS.

If i read this correctly you are going the other way but copying files from Windows XP to a Windows 7 machine will cause networking to drop out on the Win7 machine, you have to do some registry tweaks for the networking for it to not drop out. I've run into
that several times.
If that has nothing to do with your issue the only thing i can think of is an issue with your script causing it to delete or not successfully copy the files. I've used xcopy /dicey for lots of things without an issue though. Perhaps it is something with
your exclusions or symbolic links. Maybe drop the /v off and see if that makes a difference?

Help! what is the default location for shared file system?

Help! i came in this morning and for some bizarre reason the shard file system information had disappeared and podcast producer wouldn't work i thought it was in library/quicktimestreaming/movies so i set it to there but when i try and submit a video i just get question-marks in the post where the video should be its obviously not finding it. So i found where most of the previous videos were which is a folder called Podcast Producer which seems to be a link to my external drive but when i set the shared file system to this folder it creates a new folder called podcasts and sticks them in there so i get the same question-mark scenario. Its bizarre i can't figure out why it would losse the information in server admin the only thing i can think of is that i did a repair permissions and wondered if it might have set some permission on the shared filesystem folder differently and made it somehow inaccessible does anybody know what permissions should be set on the folder? Also regarding quicktime streaming does this location have to be the same as the shared file system folder?
Message was edited by: purplemonkey1

Thanks - The folder was hidden, so once I changed my options to see hidden files, I was able to find it exactly where the link told me it would be.
Much appreciated!

How the applet can access local file system?

1. I want to plugin the applet into the JSP. That applet should access the local file system. How to enable this programmatically.
2. Is it is possible to embed a frame inside the JSP. If so how?
Thanks in advance..
K G Vinoth

1: If you want the applet to access the client's local file system you'll have to sign the applet. There is a tutorial some where on the java.sun.com that explains how to sign an applet.
2: No you;ll need to use an applet to display swing or awt components on the client browser.

Moving copy of project laptop to iMac. When I try to export my laptop project to either a thumbdrive or a SD card, the export fails and says 'file system of destination volume not supported'. How to fix?

When trying to move a project from Macbook Pro laptop to iMac, the program says, 'file system of the destination volume is not supported.'
This is true for both a thumb drive and a SD card. What is the fix? Thanks

Format them OS X Extended. Aperture libraries have to be on OS X Extended formatted volumes.
Use Disk Utility. Remember when you format a drive you erase all the data that is on it. So it there is anything you want on those copy it off first.

Why do the folders on my external sparse drive only open in icon view?

Even though I select list view, the next time I open a folder it is always in icon view. The "view option" in the View pulldown menu only shows a box for Always open in icon view and the "Use as Defaults" box is greyed out. This problem does not exist on my iMac internal drive, only on the external drive on which I have created a sparse image for security purposes.

I followed exactly what you advised, and it all worked. I did convert the files first that were .AVI ---> .MP4 (the audio and video came out beautifully when viewed). I organized my files around a bit, and then I went into Itunes---> Preferences---> Advanced---> Changed where I want to grab my movies from. It keep all my previous music, tv, movies, podcasts files that I had in ITunes, and just "added" the new content without disrupting anything in my Itunes at all. I LOVED IT...so simple in the end.
The files did take a while to convert, but I only had to do the ones that I had that were labeled ".AVI". The program, HAND BRAKE, allowed me to set up a "batch" and I had them converting during the afternoon and into the evening.
All in all....THANK YOU/___sbsstatic___/migration-images/migration-img-not-avail.png/___sbsstatic__ _/migration-images/migration-img-not-avail.png/___sbsstatic___/migration-images/ migration-img-not-avail.png/___sbsstatic___/migration-images/migration-img-not-a vail.png/___sbsstatic___/migration-images/migration-img-not-avail.png/___sbsstat ic___/migration-images/migration-img-not-avail.png/___sbsstatic___/migration-ima ges/migration-img-not-avail.png
Since whenever I open my Itunes, all the movies display well, and so my APPLE TV can now view all my "content" in Itunes. I thought I was going to have to return that APPLE TV since I couldn't figure a way around it, and all in all, it wasn't all that bad of a process to convert and then change file location in preferences.
MANY THANKS and HAVE A GREAT WEEK

How do I change the "Q" icon in my files folder to the first image of the movie like my .avi files?

How do I change the "Q" iconin my file folders like I have for my .avi files? I have Windows XP and have just purchased a new Nikon camera. All video files are imported as Quicktime and it is frusterating to see what the video is without having to open all of them.

Just do:
setIconImage(Toolkit.getDefaultToolkit().createImage(YourFrame.class.getResource("your_icon_file")));
Abraham

How to pull the document stored in external storage system ?

Hi,
We are having one external storage medium to store( planning to do so) SAP documents. In our case it is filenet server.
My concern is .
How can we pull the doc from the filenet server (external storage medium)?. I am in need, how and what an abap development team needs to be done?.
Can anyone help in this regard ....to get the best logic and best technique ....!!!
Thanks in advance
Pons.

Hi Ponnuchamy,
to solve your issue RFC is an ideal one ,basically it consists of sender and receiver profiling destination configuration etc.
Chk these links for further clarification
http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/97a066223e440b8ead3da027b17d9e/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/22/0424ba488911d189490000e829fbbd/frameset.htm
Thanks and Regards
Srikanth.P

Reading the Blob and writing it to an external file in an xml tree format

Hi,
We have a table by name clarity_response_log and content of the column(Response_file) is BLOB and we have xml file or xml content in that column. Most probably the column or table may be having more than 5 records and hence we need to read the corresponding blob content and write to an external file.
CREATE TABLE CLARITY_RESPONSE_LOG
REQUEST_CODE   NUMBER,
RESPONSE_FILE BLOB,
DATE_CRATED    DATE                           NOT NULL,
CREATED_BY     NUMBER                         NOT NULL,
UPDATED_BY     NUMBER                         DEFAULT 1,
DATE_UPDATED   VARCHAR2(20 BYTE)              DEFAULT SYSDATE
)The xml content in the insert statement is very small because of some reason and cannot be made public and indeed we have a very big xml file stored in the BLOB column or Response_File column
Insert into CLARITY_RESPONSE_LOG
   (REQUEST_CODE, RESPONSE_FILE, DATE_CRATED, CREATED_BY, UPDATED_BY, DATE_UPDATED)
Values
   (5, '<?xml version="1.0" encoding="UTF-8"?><xml-response><phone-number>1212121212</tracking-number></xml-response>', TO_DATE('09/23/2010 09:01:34', 'MM/DD/YYYY HH24:MI:SS'), 1, 1, '23-SEP-10');
Insert into CLARITY_RESPONSE_LOG
   (REQUEST_CODE, RESPONSE_FILE, DATE_CRATED, CREATED_BY, UPDATED_BY, DATE_UPDATED)
Values
   (6, '<?xml version="1.0" encoding="UTF-8"?><xml-response><phone-number>1212121212</tracking-number></xml-response>', TO_DATE('09/23/2010 09:01:34', 'MM/DD/YYYY HH24:MI:SS'), 1, 1, '23-SEP-10');
Insert into CLARITY_RESPONSE_LOG
   (REQUEST_CODE, RESPONSE_FILE, DATE_CRATED, CREATED_BY, UPDATED_BY, DATE_UPDATED)
Values
   (7, '<?xml version="1.0" encoding="UTF-8"?><xml-response><phone-number>1212121212</tracking-number></xml-response>', TO_DATE('09/23/2010 09:01:34', 'MM/DD/YYYY HH24:MI:SS'), 1, 1, '23-SEP-10');
Insert into CLARITY_RESPONSE_LOG
   (REQUEST_CODE, RESPONSE_FILE, DATE_CRATED, CREATED_BY, UPDATED_BY, DATE_UPDATED)
Values
   (8, '<?xml version="1.0" encoding="UTF-8"?><xml-response><phone-number>1212121212</tracking-number></xml-response>', TO_DATE('09/23/2010 09:01:34', 'MM/DD/YYYY HH24:MI:SS'), 1, 1, '23-SEP-10');
Insert into CLARITY_RESPONSE_LOG
   (REQUEST_CODE, RESPONSE_FILE, DATE_CRATED, CREATED_BY, UPDATED_BY, DATE_UPDATED)
Values
   (9, '<?xml version="1.0" encoding="UTF-8"?><xml-response><phone-number>1212121212</tracking-number></xml-response>', TO_DATE('09/23/2010 09:01:34', 'MM/DD/YYYY HH24:MI:SS'), 1, 1, '23-SEP-10');THe corresponding proc for reading the data and writing the data to an external file goes something like this
SET serveroutput ON
DECLARE
   vstart     NUMBER             := 1;
   bytelen    NUMBER             := 32000;
   len        NUMBER;
   my_vr      RAW (32000);
   x          NUMBER;
   l_output   UTL_FILE.FILE_TYPE;
BEGIN
-- define output directory
   l_output :=
      UTL_FILE.FOPEN ('CWFSTORE_RESPONCE_XML', 'extract500.txt', 'wb', 32760);
   vstart := 1;
   bytelen := 32000;
---get the Blob locator
   FOR rec IN (SELECT response_file vblob
                 FROM clarity_response_log
                WHERE TRUNC (date_crated) = TRUNC (SYSDATE - 1))
   LOOP
--get length of the blob
len := DBMS_LOB.getlength (rec.vblob);
      DBMS_OUTPUT.PUT_LINE (len);
      x := len;
---- If small enough for a single write
IF len < 32760
      THEN
         UTL_FILE.put_raw (l_output, rec.vblob);
         UTL_FILE.FFLUSH (l_output);
      ELSE
-------- write in pieces
         vstart := 1;
         WHILE vstart < len AND bytelen > 0
         LOOP
            DBMS_LOB.READ (rec.vblob, bytelen, vstart, my_vr);
            UTL_FILE.put_raw (l_output, my_vr);
            UTL_FILE.FFLUSH (l_output);
---------------- set the start position for the next cut
            vstart := vstart + bytelen;
---------- set the end position if less than 32000 bytes
            x := x - bytelen;
            IF x < 32000
            THEN
               bytelen := x;
            END IF;
            UTL_FILE.NEW_LINE (l_output);
         END LOOP;
----------------- --- UTL_FILE.NEW_LINE(l_output);
      END IF;
   END LOOP;
   UTL_FILE.FCLOSE (l_output);
END;The above code works well and all the records or xml contents are being written simultaneously adjacent to each other but we each records must be written to a new line or there must be a line gap or a blank line between any two records
the code which I get is as follow all all xml data comes on a single line
<?xml version="1.0" encoding="ISO-8859-1"?><emp><empno>7369</empno><ename>James</ename><job>Manager</job><salary>1000</salary></emp><?xml version="1.0" encoding="ISO-8859-1"?><emp><empno>7370</empno><ename>charles</ename><job>President</job><salary>500</salary></emp>But the code written to an external file has to be something like this.
<?xml version="1.0" encoding="ISO-8859-1"?>
<emp>
<empno>7369</empno>
<ename>James</ename>
<job>Manager</job>
<salary>1000</salary>
</emp>
<?xml version="1.0" encoding="ISO-8859-1"?>
<emp>
<empno>7370</empno>
<ename>charles</ename>
<job>President</job>
<salary>500</salary>
</emp>Please advice

What was wrong with the previous answers given on your other thread:
Export Blob data to text file(-29285-ORA-29285: file write error)
If there's a continuing issue, stay with the same thread, don't just ask the same question again and again, it's really Pi**es people off and causes confusion as not everyone will be familiar with what answers you've already had. You're just wasting people's time by doing that.
As already mentioned before, convert your BLOB to a CLOB and then to XMLTYPE where it can be treated as XML and written out to file in a variety of ways including the way I showed you on the other thread.
You really seem to be struggling to get the worst possible way to work.

For some reason, when I access FINDER I only can see my files alphabetically, by kind, date etc. In can't see the "tree" of the folders. How can I show the files contained in a folder as a group?

How can I:
- Display the tree structure of the folders.
- Display my files grouped by folders

Do you mean when you do a Save, or when you click on the Finder icon on your Dock?
If it's the former click on the arrow to the right of the Save to reveal full finder.
If it's the latter show the Finder Sidebar and choose your Home folder.

Images in the folders of an external file system KM

Similar Messages

Maybe you are looking for