Images in the screen corrupted by some strange lines ...

Hi,
I have many troubles concerning the display on my MacBookPro. Often, the image on the screen is corrupted by black lines and some strange colour patterns. When I use Tiger on the same machine everything is fine. I agree that with the version 10.5.2 the situation is a bit better tan with the 10.5.1, but anyway, this is not acceptable from Apple. When I disable the Quartz Extreme (via a tool in the developer folder), everything is OK. Hey Apple, how to solve this?
Best regards, Edo

I think I solved the problem, but this is not good for Apple.
I checked the hardware specification via the "Abour this Mac" ... and I discovered that my graphic card doesn't support the Quartz Extreme!!!! So, why my Leopard configuration is set to support this feature? I have found this link that for the moment, solved my problem
http://www.macosxhints.com/article.php?story=20040724190553112
I hope that Apple will fix this in the version 10.5.32323
Regards

Similar Messages

  • IPhone 5, backlight works but there is no image on the screen. How do I fix the problem or get a replacement?

    I have an iPhone 5 32GB that is less than a year old, I smashed the screen not long ago and had it replaced and now the backlight works but there is no image on the screen. Its fully working apart from the screen, can I get a replacement? Or how else would anyone suggest to fix the problem?

    Make an appointment at the genius bar of your local Apple store or contact AppleCare. Some Apple Stores in the US can replace the display in an iPhone 5 for $149. If it requires more than that, a replacement phone will cost you $229.

  • HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    Cconnect it to your computer with the latest version of iTunes installed.

  • How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

    How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

    If you do Cmd+Shift+3 you'll get a full screen image saved to your desktop as a jpg file.
    Also, you can use Cmd+Shift+4 and you'll get a cursor which you click+drag to draw a box. When you release the drag the boxed in area will be saved to the Desktop as a jpg file.

  • Satellite Pro M10: image on the screen is very dark

    I have a Satellite Pro M10 Notebook that has a black screen, i.e. the back light doesn't work. There is an image on the screen but it is very dark. When connecting an external monitor I get a normal image on that monitor.
    From information gathered from other posts here I conclude that there is a problem with the backlight of the lcd screen or the inverter. I checked all connections, but that didn't solve the problem. If I bring the laptop to a service center what will it approx. cost to have it repaired? The thing is 2-3 years old, so if it is very expensive I might better get a new laptop.
    I'm sure I will be able to change to inverter board myself, but how will I be able to determine that the inverter is the problem? How to obtain a new inverter? Does anyone of you know the right product number?
    My Pro M10 itself has product number PS630E-G205Z-DU.

    Hi
    I agree with Tobi. You description sounds like a faulty FL-inverter.
    This part is placed behind the LCD screen under the lid cover.
    As mentioned this part isnt very expensive and you could order it from the Toshiba service partner in your country. But please note that if you have no replacements experiences so you should ask the technicians for the help.

  • Adding more then one image on the screen

    hi all,
        i want to add different different images on the screen.
        this is new task to me ... and as i am new in ABAP
        i am finding it a bit difficult to start with this problem
        so please provide me the complete information from very start to end.
      thanks in advance.

    hi ravindra,
    i had gone through the program  and in it ,they are passing the static value in the respective internal table like this
      query_table-name = '_OBJECT_ID'.
      query_table-value = 'ENJOYSAP_LOGO'.
    and i want to know  what is OBJECT_ID and where to create it where  this image ENJOYSAP_LOGO is stored. plz tell me every thing about the two fields.
    regards,

  • Make image fill the screen

    I want to make the image fill the screen like http://www.digitalstormonline.com/bolt-ii.asp, i want it to fill the screen even when zooming in and out

    Hi,
    did you check this
    Add an image to the background of the page or browser | Adobe Muse CC tutorials
    Check the below link, under heading "Working with elements set to 100% width"
    Adobe Muse Help | Using Fill and Browser Fill options
    Do let me know if you have any question.

  • I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    Irelandbound wrote:
    thank you, I have the adaptors so glad that would work.  I just heard adaptors burn out often.  So Just thought for my main iMac computer, a plug would be best.  I will get one once I move.
    Any other suggestions or things I should know about apple products in Ireland.  I know there are no Apple stores there.
    An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
    I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
    You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
    Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
    Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
    If you have something that doesn't have that input power spec, it would require a transformer.
    On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

  • I received a notice to my ipad to update ios7 the latest version. i clicked on update now and the ipad is frozen with an itunes logo and a ipad connector image on the screen. anyone help me with this

    I received a notice to update my ipad to the latest version of ios7 and when I did the ipad froze with a itune logo and an ipad connector image on the screen..i have turned it off several times but it remains frozen. anyone help with this?

    Unfortunately, your iPad went into recovery mode and must be restored now. There is no getting around this. You need to use iTunes to do this as well. Read this for more instructions.
    If you can't update or restore your iOS device - Apple Support

  • Hi.. i bought an ipad from frys store last week. but when i use it, the home button has some strange sound when i push it. if i want to exchange at apple store, it could be

    hi.. i bought an ipad from frys store last week. but when i use it, the home button has some strange sound when i push it. if i want to exchange at apple store, it could be

    Does Target accept returns from something you bought at Wal-Mart?
    Bring it back to Fry's.

  • Frozen iPod classic with lock and battery images on the screen

    When I unlocked my iPod classic while listening to music, everything stopped, and i got an image on the screen of the time when this happened (6:30), a lock image below it on the left, and a black horizontal battery on the right. The iPod won't work now, whether locked/unlocked or whether connected/unconnected to my PC/iTunes. What, if anything is the fix?

    Have you tried just a hard reset yet? To do this, first make sure the hold switch is toggled to the off position, then press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Photoshop CS4 - When I pullled up a file, JPEG logo someone sent to me, the screen has cross thin green lines over it. What is that? How do I remove it?

    Photoshop CS4 - When I pullled up a file, JPEG logo someone sent to me, the screen has cross thin green lines over it. What is that? How do I remove it?

    JPEG files are not layered files they are just image files so the green lines are a part of that file.
    Usually cross lines are added to prevent anyone from using the file without proper rights, its a way of safeguarding the artwork.
    You have to ask the owner of the file to remove the lines for you.
    hope this helps
    thanks

  • The camera on my iphone4 opens up but seconds after the screen turns black with white line.

    Hi guys! Please help me I have iPhone 4 .the camera although opens up when I press the button, but seconds after the screen turns black with white line. Need I need it repaired or there is some trick which can set it right.?

  • I have the original iPad and today 2 inches of the screen went to all color lines. Cant' work or play?

    I have the original ipad. Today 2 inches of the screen went to straight color lines. Can't change it! Can't read or work. HELP!!!! Please : )

    Sounds like hardware failure.
    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • I have an iphone 4 and i'm having lot of problems: my back camera is blurred although my front camera is fine and working normal. my biggest problem is that the screen is showing colored horizontal lines

    I have an iphone 4 and i'm having lot of problems:
    _ my back camera is blurred although my front camera is fine and working normally
    _ my biggest problem is that the screen is showing colored horizontal lines(as perhaps electrical problems). The phone did fell and I already changed its back and front but everything was normal until these problems appeared suddenly
    Please can somebody help me to solve it and tell me what are the reasons?
    Thx

    you can try turning it off and on again, but i doubt that's gonna work, that sounds like more of a hardware issue. Your best bet may be to contact apple and seek service or replacement

Maybe you are looking for

  • How can I hide or make visible the fields at the order and at the delivery?

    How can I hide or make visible the fields at the order and at the delivery? Thanks in advance.

  • Currently the Reader adds "-signed" to the filename. Not good.

    I am using Reader XI.  I use the Signature (Sign) feature to sign my PDF's.  I sign ALL my PDF's prior to sending them out to customers.  I do not like the filename to be modified when I sign.  Currently the Reader adds "-signed" to the filename.  Th

  • Film rolls are missing

    One of my iPhoto libraries has film rolls missing and rebuilding thumbs and database did not help. I can see the original photos in the iPhoto library on the hard drive though, so I would not want to reimport. Is there a way to show the film rolls ag

  • Question on Solaris 10

    Hi, I have a question about the Solaris 10 operating system, when I make the execution of commands in a terminal, it freezes and can no longer continue to run more commands. A to be the problem? thanks

  • VLOOKUP over multiple sheets is NOT working?

    I have ported a working Excel sheet into the iOS version on numbers and for what ever reason, the formulas are not working.  I have cleared all the cell data and marked with the appropriate field type e.g. number/text. The idea is that on SHEET A the