Images Missing in File

1) If all layers are showing (visible) is it possible some will not be visible until rendering. I played the file and some images were missing. I checked to see that the images were included in the file and they are.
2) I believe some of the images are missing but the guy who made the file say’s they are all there. I need to show him a render but don’t want to render out the whole animation. Is it possible to do a “quick” render of only the problematic part of the file to show someone the problem area?
What is the best way to set this up?

a.) Move your playhead to the section where the problematic frames begin and press the B Key to set the beginning of your work area.
b.) Then move your playhead to the end of your work area and press the N key to set the end of your work area.
When you send your comp to the Render Queue, click "Best Settings" to open up the Render Settings menu.  It should be on automatically, but you can check to make sure "Work Area Only" is selected next to Time Span: to make sure that you're only rendering the work area section of the timeline.

Similar Messages

  • How do I re-attach missing Illustrator files

    APOLOGIES FOR CROSSPOSTING FROM INDESIGN FORUM (where I have not gotten any responses):
    Thanks in advance for reading this!
    I am converting an InDesign document to ePub and mobi. The document also exists as a PDF file (which, as you may know, can not be converted effectively to ePub).
    The InDesign file has been supplied to me with missing Illustrator .ai links for charts and graphs. There are lo-res  images in their places.
    I could manually import individual charts from the PDF file  into Illustrator, but there are dozens of them and relinking will be a huge job as it is. Any suggestions on how to transform all charts and graphs in the PDF file to .ai files OR import them directly into InDesign?
    Many thanks

    Thanks for your reply.  My replies are in line:
    1. how do you know the links are missing?
    The "missing, click to relink" question mark appears in all InDesign charts and graphs. The ID links panel is all question marks.
    2. how do you know the there are lo-res images in their place? (are they named as such? is your page display set to 'highest')
    When I create an epub or mobi file, the graphics are blurred, placeholders for the intended artwork.  I can anchor them, but they look pretty poor.
    3. can you contact whoever made the source files to acquire the missing files?
    I have tried (and tried and tried). Alas, this is a pro bono job for a UN development agency in Beijing, and no one can figure out where the files are (even though I found the a complete directory path to where they should be on SOMEONE'S computer).
    4. you can PLACE the PDF pages diectly into indesign (crop to the charts) and then delete the lo-res files after using them as a reference for placement and size--yes a lot of work, but if you got to, then you got to.
    At this point, if I can't come up with an alternative, I think it will be easiest to select each chart and graph from the PDF, then "edit using AI...", save them individually as AI files and relink them. I was praying for a more simple solution (other than finding those missing .ai files).
    There is an extension, but it's $100 and I'll probably never need to use it again.  I'd spring for it if I was sure it would save me much time.
    Again, thanks for your reply.

  • Work around to missing vmdk files

    I have seen the "missing vmdk files" thread. But I also see people has got this up and running. While they fix it, is there a work around? I need to demo this next weel. Any help is greatly appriciated.
    Thanks
    Sam

    Okay I figured it out. From the RedHat site, download one of the older Disc 2 images RHEL3..1.4 and it works. Don't down load the 10GR2 version of DISC 1.

  • Images and js files within a deployed war file are generating 404 errors.

    Greetings,
    I have an odd situation in that image files and js files that are part of a deployed war file are generating 404 (not found) errors when accessed via https but ARE found when accessed via http.
    Unfortunately we are required to use https.
    I have verified via jar -tf that the files are indeed part of the war file. So, it is not that they are missing as is evident when accessed via http. (they appear as expected)
    A work around is to create the sub directories under the document root, on the ohs, and populate the sub directories with the images and js files that were used as part of the war file build. While this works, it doesn't explain why they would generate a 404 error when referenced from within the war via https.
    The war file works correctly on our 10g installation.
    I also have a very simple deployed war file and it too seems to have an issue finding direcotries/files that are part of the war file when referenced via https but not http.
    We are using Oracle 11g OHS and using the WLS Admin Console to do the deploying. We also are using the OSSO for the performing the required authentication.
    I have an SR in with oracle and have been working with them but I thought I would post here too.
    Suggestions?
    Thanks in advance.
    Edited by: emmett on Jan 5, 2011 2:47 PM

    Don't crosspost. Continue here: http://forum.java.sun.com/thread.jspa?threadID=5251627

  • Missing master files in Aperture

    I am missing master files from Aperture 3. I rebuilt the library with no success.
    Oddly, I can't even find them in Time Machine even though I know I exported versions of them. The entire month of imports doesn't ever appear in Time Machine even though I have proof that I used the master files to export in July. I haven't used Time Machine a lot so maybe I'm missing something.
    What else can I try.

    Have you checked, if the missing masters are inside the Aperture Library package?
    Sometimes Aperture looses the connection to managed masters.
    You need to find out the exact date that you imported your images - you can find that information in the "Import Session" metadata tag - ad this tag to one of the metadata preset that you use to display the metadata in the info panel - set themetadata preset in the  info panel to "edit".
    Then open the Aperture Library package (ctrl-click the Aperture Library in the Finder window) and select "Show package Contents". Inside the window that opens go to the "Masters" folder, then inside to the year , month, day you imported the images. Are the original master image files still there?
    If yes, then make a backup copy of these images, to have a copy just in case, and try to repair the permissions in your library with the library first aid tools:
    Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
    If you cannot reconnect the missing originals/masters this way, reimport the masters you found inside the library.
    Please post back, once you looked inside the library, if the masters/originals are still there.
    Regards
    Léonie

  • Reinserting Preview/Images missing from  Library and Project

    After ingesting my images from CF reader into a project, I started working on them. For some reason after working on them for awhile, I started noticing that previews were missing from the project. I looked in the Library and they were not there either. However, when I looked in to the project folder (via the Aperture "folder" in Finder), the images and associated Aperture information files were all there in their respective folders.
    I'm not sure how I lost/deleted so many images from my folder and Library (I may have accidently deleted a stack, but when I searched the number of images missing I know I could not have accidently deleted that many that way if I did). But since the files are still on my hard drive in their respective folders, in the right location, is there a way to bring them back into Aperture?
    Thanks,
    Ed

    bump...if anyone can tell me that would be great. I know it sounds like a dumb question, but for the life of me I cannot do any command - import, etc. - that can get these files that reside in the actual folder to show up in Aperture's Library or its original project.
    Thx,
    Ed

  • Missing master files...again.

    Well Aperture has lost my master files again.
    I keep them on an external HDD and backed up to another external HDD.
    How to point Aperture in the right direction? (thousands of images)
    thanks

    Hello Steve,
    are you using Aperture 3.2.3?
    Well Aperture has lost my master files again.
    What was the reason the first time this happenend?
    I keep them on an external HDD and backed up to another external HDD.
    Is your external HDD connected and can you see the master image files in the Finder?
    How to point Aperture in the right direction? (thousands of images)
    Launch Aperture
    Select the images with the missing masters in the Browser
    In main menu bar select "File -> Locate Referenced Files"
    The window that appears has two panels:
    In the top panel you select one of the images with missing masters
    In the lower panel you select the correct master file on your external volume.
    If these two match, then the "reconnect" buttons will become available. Press "Reconnect all" and Aperture should find the masters again.
    To be alble to connect all at once you may wish to create a smart album containing all images with missing masters:
         File -> New -> Smart album"
    and add a rule "File status is missing" or "File status is offline"
    Good Luck
    Léonie

  • Missing master files

    I use the library to manage all of my files and when I moved files the versions from one project to another some of the master files are now missing. Any easy way to locate the missing master files or restore them to the library? I move images between projects all the time and this is the first instance of masters being lost.
    Thanks,
    Scott
    Dual Core 3.0ghz, 4gb ram, 250HD, 2.5TB HD, 20" and 23" cinema   Mac OS X (10.4.8)  

    I use the library to manage all of my files and when
    I moved files the versions from one project to
    another some of the master files are now missing.
    Any easy way to locate the missing master files or
    restore them to the library? I move images between
    projects all the time and this is the first instance
    of masters being lost.
    First, check your trash for an Aperture folder and make sure the files did not get removed somehow.
    If the master images are not there, go to your Aperture library in Finder and right-click on it, selecting "Show Package Contents". Then find the projects you moved the images to, and also the project you moved the images from. Again, right click and "Show Package Contents".
    Now that you are inside your library, look in the "import" folders - that s where all of your master files are stored. You can use Finder to search for them as well in the FInder window for each project.
    When you find them, put them somewhere outside the Aperture library and use the "locate masters" command to re-link them, then use "Consolidate masters" to get them back in the library.
    Good luck!

  • Oracle 11g Forms Configuration Forms.conf  (Image and Html files)

    Hello,
    We are configuring our forms.conf file as such.
    AliasMatch ^/forms/help/(..*) "/u01/app/forms/as_1/forms/appname/help/$1"
    AliasMatch ^/forms/icons/(..*) "/u01/app/forms/as_1/forms/appname/icons/$1"
    AliasMatch ^/forms/images/(..*) "/u01/app/forms/as_1/forms/appname/icons/$1"
    However when I go to
    https://server/forms/help/help.pdf
    I get 404 .
    Is there something I am missing here. file permissions are read across the board and the directory exists.
    Is there some other configuraiton I am missing.
    Thanks!

    Was able to fix this problem.
    The following is hte resolution.
    In plan.xml
    1. At the very top create a variables.
    <variable>
    <name>vd-application</name>
    <value>/u01/middleware/wls_forms/forms/forms</value>
    </variable>
    <variable>
    At the bottom Add
    <variable-assignment>
    <name>vd-application</name>
    <xpath>/weblogic-web-app/virtual-directory-mapping/[url-pattern="help/*"]
    /local-path</xpath>
    </variable-assignment>

  • Missing raw file driver for Canon S90

    I miss raw file driver for Canon S90. The software delivered with the camera works, but it doesn't work in finder, Aperure and so on, just in Canons own software. When will the driver be available for SL?

    Apple hasn't said anything about it, but they're always quiet on everything (I think this works to their advantage for new products, but it works to their detriment for product updates.)
    Anyway, they recently released the latest Camera RAW update and surprised a lot of people by not including the S90. Adobe had problems with the S90 -- images would "load" but looked poor. I can only guess Apple also had problems and decided to push it to a later date rather than hold up the whole stack of RAW camera updates people had been waiting on (typically they release an update with support for a list of cameras).

  • Missing .dng file exists as Cr2. How batch designate them?

    How the situation came about :
    I selected all edited photos  (regardless of noted stars) in the library module and chose to all "convert them into DNG", with the option to NOT remoove the original Cr2 after conversion.
    Lightroom stoped the process after 90 minutes / 80% donne; because of disk space shortage.
    "Unfortunately" I then decided to simply delete all the just made dng's to start all over again, because this time I decided I should anyway only convert the 4 and 5 star rated images.
    But in the process of converting within the library, Lightroom had thus of course also changed 80% of the image-names in its catalogue into "SameFileName+DNG!" extention, thuse making 80% of the files showing as missing (because i just deleted these dng's).
    I have no problem to teach LR / designating  for instance "_MG_9999.Cr2" (+xmp) to be the target for the "missing" catalogue-file ""_MG_9999.DNG"  (incidently in the same folder).
    BUT, even if I check the box to let Lightroom learn from this "new" path, it will NOT do so for the hundreds of images (those 80%) since it seems to consider that this extention mix I provoced changes the name entierly without taking into account that file Name have not actualy changed !  That means I have to re-atribute every single file manualy !  ?
    Should there not be a way, for insatnce, to go into a (Win7) Lightroom catalog-folder and batch-rename the ('virtual') catalogue-files  ...DNG  into ...Cr2  ?
    (I have no backup of the cataloge from just before I "converted" int DNG.)
    I'd appréciate any help - or let Adobe know to develop "untangle" menus..)

    If you have no backup, your easiest option is to create DNG files again - but maybe in smaller chunks so you don't run out of disc space.  Use the standalone DNG converter (http://www.adobe.com/support/downloads/detail.jsp?ftpID=4724) to create the DNG files and put them back where LR's expecting to find them.

  • WDS Install Image missing HAL details

    I have a Win2008 R2 WDS server that has been up and running for quite some time. I have a Windows 7 x86 image that is hosted on that server.
    I recently updated the Win7 image, syspreped, and uploaded to my WDS server as a new (v2) image. In the past this has always been quite simple, but for some reason i cannot get the new v2 image to display at the WDS client image selection screen.
    The WDS server allowed me to add the new v2 image to my install image group, and says its online and working properly.
    The WDS Client will only display the old v1 image and not the newly updated v2 image.
    Both images were created on the SAME computer, x86, acpi multiprocessor. I am using the SAME computer to test/deploy the image.
    The source of the problem seems to be from the install image missing the HAL details
    If i use the WDS console and drill down to my old and new install images, right click and look at the properties this is what i get:
    v1 Image: HAL Type ACPIAPIC
    v2 Image: HAL Type (ITS F"N BLANK!!!!)
    I get the same results looking at the <HAL>  </HAL> parmeters using ImageX /info blah.wim
    SO, Why the HELL does WDS/Sysprep not recognize my HAL type of my new v2 image???? I have tried 3 different computers to generate/capture the install image and ALL are missing the HAL type.
    Anyone have a clue why the WDS/SYSPREP process does not identify the HAL type and leaves me with a blank string - and hence a useless image?
    I have previously tried this KB with no change:
    "An ACPI APIC UP HAL operating system image cannot be deployed if a Windows 7 boot image or a Windows Server 2008 R2 boot image is used in the deployment process
    http://support.microsoft.com/kb/980711"
    me

    I cant post that online. Its from a secure network. So this is hand typed...
    v1 Image that works:
    <WIM>
    <TOTALBYTES>3465086</TOTALBYTES>
    <IMAGE INDEX=1>
    <NAME> WINDOWS 7 V1 </NAME>
    <DESCRIPTION> THIS IS MY DESCRIPTION </DESCRIPTION>
    <WINDOWS>
    <ARCH>0</ARCH>
    <PRODUCTNAME> Microsoft Windows Operating System </PRODUCTNAME>
    <EDITIONID>PROFESSIONAL</EDITIONID>
    <INSTALLATIONTYPE>Client</INSTALLATIONTYPE>
    <HAL>acpiapic</HAL>
    <PRODUCTTYPE>WinNT</PRODUCTTYPE>
    <PRODUCTSUITE>Terminal server</PRODUCTSUITE>
    <LANGUAGES>
    <LANGUAGE>en-US</LANGUAGE>
    <DEFAULT>en-US</DEFAULT>
    </LANGUAGES>
    <VERSION>
    <MAJOR>6</MAJOR>
    <MINOR>1</MINOR>
    <BUILD>7601</BUILD>
    <SPBUILD>18229</SPBUILD>
    <SPLEVEL>0</SPLEVEL>
    </VERSION>
    <SYSTEMROOT>WINDOWS</SYSTEMROOT>
    </WINDOWS>
    v2 Image that does NOT work:
    <WIM>
    <TOTALBYTES>3510306</TOTALBYTES>
    <IMAGE INDEX=1>
    <NAME> WINDOWS 7 V2 </NAME>
    <DESCRIPTION> THIS IS MY DESCRIPTION </DESCRIPTION>
    <WINDOWS>
    <ARCH>0</ARCH>
    <PRODUCTNAME> Microsoft Windows Operating System </PRODUCTNAME>
    <EDITIONID>PROFESSIONAL</EDITIONID>
    <INSTALLATIONTYPE>Client</INSTALLATIONTYPE>
    <VERSION>
    <MAJOR>6</MAJOR>
    <MINOR>1</MINOR>
    <BUILD>7601</BUILD>
    <SPBUILD>18229</SPBUILD>
    <SPLEVEL>0</SPLEVEL>
    </VERSION>
    <SYSTEMROOT>WINDOWS</SYSTEMROOT>
    </WINDOWS>
    Notice that the v2 image is missing the following from the xml:
    <HAL>acpiapic</HAL>
    <PRODUCTTYPE>WinNT</PRODUCTTYPE>
    <PRODUCTSUITE>Terminal server</PRODUCTSUITE>
    <LANGUAGES>
    <LANGUAGE>en-US</LANGUAGE>
    <DEFAULT>en-US</DEFAULT>
    </LANGUAGES>
    Im lost as what to try next. Anyone have any ideas why my new v2 image is missing information from the .wim file?
    me

  • Missing movie file

    I have created a movie in imovie. When I share it with idvd everything is fine and I can burn a dvd (the 1st time). The next time I try to open that dvd project I get a message saying "missing movie file clip 01.dv. Would you like to search for it?" I can't seem to find it anywhere. It says the dvd won't play properly with out it, then idvd usually ends up freezing up. That movie name isn't even part of my original movie. So everytime I want to make a change or burn another dvd of this project, I have to go back into imovie and export to idvd again.
    Please help!

    If you get a good first burn every time that you initially export your iMovie project to iDVD, try saving the iDVD as a disk image instead of burning a DVD disk. When you save as a disk image iDVD goes through the same encoding process as if you were burning to a DVD disk. Once you have burned a disk image you then can open and close the disk image multiple times to burn multiple DVD disks from the disk image, using Applications/Utilities/Disk Utility, without again going through the encoding process. So, if the first burn is good, all the other burns will be good.
    It is oft recommended to close iDVD and iMovie and trash the files named com.apple.iMovie.plist and com.apple.iDVD.plist. When you relaunch, the programs will replace those files with new ones. Then run a permissions repair using Applications/Utilities/Disk Utility.
    If you are storing your project on an external drive, make sure that the drive is formatted correctly. It should be Mac OSExtended or Mac OS Extended (journaled).
    Make sure that you have enough hard drive free space for iDVD to work. It takes at least 5GB of free disk space to burn a disk, and you should have more than that if possible.
    Did you actually look into your iMovie media folder to see if Clip 01.dv exists? Control click on your iMovie project icon and select Show Package Contents/Media. See if it's in there.
    I know that in iDVD5 (not sure about iDVD6) If you added an asset to your project, and then removed it and deleted it from your hard drive, iDVD would still think that that asset was in the project. Because it was deleted from the hard drive, iDVD wouldn't be able to find it and would report it as a missing asset. Maybe that's what is happening to you here. The solution then would be to retrieve that deleted asset and put it back on your hard drive so you can reinsert it into the project.
    Always a good idea to archive your iDVD project rather than just doing an ordinary save. Takes up more disk space, but an archive bundles all of the project assets with it so everything is intact if you move it off to an external drive or another computer. Otherwise, you can get broken links.
    Good luck with this.

  • DW CS5 Missing Related Files Problem

    Hello
    Hoping somebody may be able to help me with a missing related files problem in CS5. I've tried Adobe phone support but they couldn't solve the problem.
    *Some* of my sites (but not all) are not showing all the files related to that page. My pages are typically in .asp vb server model and contain .asp virtual includes (header, nav etc) plus .js and .css linked files
    However DW is only showing the .asp includes as related files and not css or js ones. In design view the CSS is displaying correctly, and all styles appear in the CSS inspector but not showing as a related file in the bar. In CS4 it works fine.
    I've tried deleting the site and recreating it, copying the files to a new folder and setting up a fresh site, creating a new folder and downloading all files from the remote server but no joy. I've also tried refreshing related files. if I click on the filter in the bar it only shows the asp includes and nothing else.
    Any help would be gratefully appreciated, this is a great feature when it works
    Cheers
    MB

    UPDATE:
    Managed to solve this problem, this is a new issue to DW CS5, previous versions do not seem to exhibit this problem
    It occurs when you use site root rather than document relative paths for js/css etc files AND don't have the remote site url (web url) specified in the site setup | local info dialog, or do not have it fully qualified with http://
    ie. ../js/file.js works fine without a remote web url but /js/file.js does not show the related file in the bar unless a remote url is defined.
    Hope that helps anyone else that encounters the same issue!
    MB

  • How do I add multiple images into one file?

    I'm sure this is something that's been covered in another post (or even in the help portal) but I think my wording in my search terms are not correct or... I don't know, because I just can't find what I'm looking for.
    I want to know how to add multiple images into one file/one image, both horizontally and/or vertically. To give you an idea of what I mean, check out :
    http://www.best10apps.com/apps/comic-story,531596060.html
    If you scroll down, you'll see a heading entitled : Screenshots of Comic Story. Notice how there's 3 pictures (divided by borders). 2 of those pictures are side by side, and 1 of them is below the first 2 pictures.
    I want to know how to add different pictures/images and put them into one picture.

    One way is to create template PSD files and populate them with your images using Photoshops scripts.
    Photo Collage Toolkit UPDATED June 12, added Picture Package Support via PasteImageRoll and BatchPicturePackage scripts.
    The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
    There are eleven scripts in this package they provide the following functions:
    TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
    CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
    LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
    InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
    ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
    ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
    PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
    BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
    BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
    BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
    PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
    Documentation and Examples

Maybe you are looking for