Images not appearing in Preview

I recently created a website using tables and everything worked fine when I previewed it and also tested it on the server. But today when I went to go edit it, only the text appear but none of the images do. Is there a way to fix this?

Here is the link to my orignal page that worked:
http://www.geeyungsf.com/test.html
Here is the same home page from the above that I was editing today but the images don't appear:
http://www.geeyungsf.com/test3.html
I double checked to make sure all the images are linked properly but I don't seem to find the problem. Most are surface images and some have rollovers.

Similar Messages

  • LR 4 - image does not appear in Preview and will not print`

    The selected image appears on the main/center panel but not in the preview screen.  Printing results in a white sheet of paper with no image at all.  The image has been updated to LR 4 - but made no difference.  I've served help and the forums (where i saw mention of similar problems, but no comments or guidance on the problem).  What am I doing wrong?

    The problem began with the installation of LR4. I print directly from LR4 to my HPZ3100. I routinely select "print preview" in the print dialogue box. Now the first print I see the preview and then it prints. If I select a second print job and use the "print preview" the print preview screen comes up blank and never loads. If I try to delete the print job, it just never responds (resolves) so I have to turn off the computer and the printer and restart to clear the print job. if I don't use the print preview, it prints just fine (except that I'm not able to check what's about to be printed). Thanks for any thoughts you have on this.
    Date: Tue, 10 Jul 2012 16:01:47 -0600
    From: [email protected]
    To: [email protected]
    Subject: LR 4 - image does not appear in Preview and will not print`
        Re: LR 4 - image does not appear in Preview and will not print`
        created by Brett N in Photoshop Lightroom - View the full discussion
    Bill, if this is only happening some of the time, then we are probably looking at a resource issue. Any pattern in when things won't print? e.g. Certain file type won't but others will? Or is it more of a timing/order thing? e.g. First file prints fine, second does not? VStromee, do no files print for you? Or is it like Bill and sometimes the print and other times they do not? Did you install any new software recently or have any updates to the OS or any application that has printing capabilities?
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4549692#4549692
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4549692#4549692. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Website images not appearing

    http://www.benefitsinc.com
    Images not appearing on website, site looks fine in safari and ie,
    Firefox 11

    The first to do in cases like this if you've uploaded new files is to reload web page(s) and bypass the cache.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Cmd + Shift + R" (MAC)
    You have images on your web page that have a backslash in the URL that Firefox escapes a %5C and that do not work.<br />
    You can see those images as grayed in the Tools > Page Info > Media window.
    *http://www.benefitsinc.com/images%5Cwb5.jpg
    *http://www.benefitsinc.com/images%5CBI-Button1.jpg
    *http://www.benefitsinc.com/images%5CBCo-Button1.jpg
    *http://www.benefitsinc.com/images%5CBT-Button1.jpg
    *http://www.benefitsinc.com/images%5CBP-Button1.jpg
    *http://www.benefitsinc.com/images%5CBX-Button1.jpg
    *http://www.benefitsinc.com/images%5CBTX-Button.jpg
    *http://www.benefitsinc.com/images%5CBHR-Button1.jpg
    *http://www.benefitsinc.com/images%5CBTK-Button.jpg

  • Images not appeares

    hi all
    after i upgraded to version 1.6 the images not appears
    in htmlDB pages . although the path of the images is
    right when i check the source of the html page !!

    hi
    in the file ../Apache/modplsql/conf/marvel.conf
    i have the line
    Alias /i/ "/oracle/oracle10g/product/10.1.0/html_db/marvel/images/"
    which is the exact physical path
    and here is the source of one of the images that not appears in the html page (from the properties of the image)
    http://wfpas:7777/oracle/oracle10g/product/10.1.0/html_db/marvel/images/htmldb/oracle_htmldb_logo.gif
    and the path and the image are exists

  • Image does not appear in preview

    I want to put logos for facebook, twitter, RSS, and Flckr on mainindex page and othher directory pages.  The images appear in design but not when I preview in Firefox.  instead the alt text appears.   How do i get the images, not the text to appear?I do have the backslash in front of the next lower level directories.

    It is not online yet. it's stil inthe development phas and I only have an offline version. here is the code for the main index, the one that works
    <h3>
    <strong><a href="Index.html">FOLLOW</a>: </strong><a href="http://feeds.feedburner.com/AndySmithPhotographyBlog"><img src="Images/feed-icon-28x28.png" alt="RSS feed" width="28" height="28" /></a> <a href="https://twitter.com/astherev"><img src="Images/twitter-bird-white-on-blue-small.jpg" width="29" height="29" alt="twitter account" /></a> <a href="http://www.facebook.com/pages/Andy-Smith-Photography/158899207459937"><img src="Images/f_logo-small.jpg" width="29" height="29" alt="facebook" /></a> <a href="http://www.flickr.com/people/astherev/"><img src="Images/Flickr-red-64-1.png" width="29" height="29" alt="flickr" /></a><a href="http://www.andySmithPhotography.com/wordpress"> BLOG</a></h3>
    Here is the link for the next level directory:
    <h3 align="center">
    <strong><a href="Index.html">FOLLOW</a>: </strong><a href="http://feeds.feedburner.com/AndySmithPhotographyBlog"><img src="/Images/feed-icon-28x28.png" alt="RSS feed" width="28" height="28" /></a> <a href="https://twitter.com/astherev"><img src="/Images/twitter-bird-white-on-blue-small.jpg" width="29" height="29" alt="twitter account" /></a> <a href="http://www.facebook.com/pages/Andy-Smith-Photography/158899207459937"><img src="/Images/f_logo-small.jpg" width="29" height="29" alt="facebook" /></a> <a href="http://www.flickr.com/people/astherev/"><img src="/Images/Flickr-red-64-1.png" width="29" height="29" alt="flickr"/></a><a href="http://www.andySmithPhotography.com/wordpress"> BLOG</a></h3>

  • Some images do, some do not appear in Preview or Publish

    Greetings,
    I imported a FrameMaker file, which generated its own folder
    and the file with all of its screenshots are in that folder. Within
    RoboHelp (7, FlashHelp) all images appear as expected. When
    compiled for Preview or for Publshing, however, some images do
    appear while others with the same path do not appear.
    What is going on?
    Am I missing something?

    Yes I do and that is another problem I will check the box for each item I do want to show up
    in the menu bar when I check the box it will stay checked until just when I'm starting to close the
    box? This really weird as I said in my 1st post I have to go to the System Library>CoreServices
    then the folder Menu Extra's I'm just about at the point of reinstalling my OS unless someone
    can tell me why this is happening
    Thanks for the post
    Michael

  • Roll over images not appearing in a preview

    I've created a new project and have had had previous success in making roll over images/captions work but now nothing in this new project is appearing when I preview the slide, not the images or the roll over captions.  I'm using Captivate 6.
    Sorry if i'm not explaining it properly but I've only started using the program this week and have no idea about any of it.
    cheers
    Emma

    Hi Emma
    I note you said: Preview the *SLIDE*. And in that type of preview, all you will ever be able to do is to view when objects appear or disappear or move. Interactive objects such as rollovers will never work in the slide preview. You must preview a different way. (Project, Next X number of slides, From this slide, etc)
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Images not appearing in finished .CHM

    Hi:
    Recently upgraded from RH5 to RH7.
    A little background: Our project in RH5 had an inexplicable
    case of the .chm file size DOUBLING after a minor accident in
    mistakenly editing some HTML in the "Truecode" page. That's over;
    not the issue here.
    A non-Adobe trainer helped me troubleshoot that, mostly by
    rebuilding the project from scratch IN ROBOHELP 5. Worked fine,
    finished .chm files back to their expected sizes, all well with the
    world. Imported the project into RH7 from a duplicated copy of the
    project folder. Got nervous about working in RH7, since our company
    had a major release of OUR product coming out.
    Returned to working on project in RH5. I had been properly
    cautioned against working on RH7-converted files, and was back in
    my original, fixed up RH5 project.
    Ever since then, however, SOME IMAGES DO NOT APPEAR. The
    result is grossly-unprofessional-looking, all-too-familiar white
    fields with the tedious little red "X" symbol, as on a badly built
    website, circa 1998. This is not OK at all.
    I have rebuilt these pages NUMEROUS times, carefully
    reimporting THE CORRECT IMAGE from its original location, and
    REIMPORTING, properly registered, added to the project, from backup
    locations. THESE IMAGES ARE PRESENT in the (RH5) WYSIWYG page, AND
    in the Topic Preview view.
    Upon Adobe "Tech Support" advice, I have hand-corrected EVERY
    quirky file name in the project (I inherited this project from
    someone who should have known better than to use special characters
    in file names), in order to eliminate any possible source of
    corruption. EVERY FILE NAME, not just images.
    File names corrected "in" RoboHelp (still version 5), and NOT
    in Windows, of course.
    Problem remains.
    Have once again, duplicated project folder and run project in
    RH7. Problem remains.
    Am ready to set my hair on fire and run screaming into
    traffic. Will post scheduled date and offer ticket sales.

    Hi:
    Thanks for the reply! I have been UTTERLY scrupulous about
    keeping precisely time-matched and points-in-my-process-matched
    copies of the project folder for logical, "scientific" testing in
    RH5 and RH7, on precisely matched content.
    I have never even tried to open an RH7-processed copy of the
    project in RH5 because I was warned strongly against this action.
    It boils down to this; I cleaned up, FANATICALLY, all those
    illegitmate filenames, ran the project again in 5, still got
    impermissible missing images (and I mean MORALLY impermissible,
    because I'm doing the right thing!)
    Then, I took that project folder, copied it, and opened the
    exact same ingredients, via the .xpj file, in RH7. Same missing
    images.
    WAIT! Left out something important in first post! Dang; this
    was important! I've fixed missing images, had them appear properly
    upon compilation, then had others that HAD been right, come out
    missing. Have also had reimported, re-placed images come out upon
    compilation following repair, and then go missing again on third or
    later, subsequent compilations. Maddening.
    Am EXTREMELY reluctant to delete CPD file, because the last
    time I did that, I lost EXTENSIVE work I'd done on TOC and Index.
    Not cool at all.
    Hope this wasn't too cranky; truly grateful for help. Just
    very frustrated.
    Thanks!

  • Image not appearing in JSP

    I have developed a JSP using Studio and have a images in the same directory as the JSP page. It appears performing a Studio preview but after imported into the portal it's not appearing. I can't figure it out. I have tried puttting it into other directories still no luck.
    Here is a piece of the jsp with the image in it.
    </HEAD>
    <BODY>
    <P>
    <STYLE>
    .cagText {
         font-family : Verdana, Arial, Helvetica, sans-serif;
         font-size : 8pt;
    </STYLE>
    <TABLE ALIGN="center">
    <TR>
         <TD WIDTH=400 VALIGN=top CLASS=cagText>
         <BR> ??????????<BR><BR>
         <DIV><B>NOTICE:</B> Electronic communications provided by the company???? <A HREF="http://www.xyz.cag Intranet</A>. Policy statement.</DIV>
         </TD>
         <TD> </TD>
         <TD VALIGN=top>
         <IMG SRC=WEB-INF/deployment/pcd/cag.ep.ISA-DisclaimerPage/pagelet/main_image.jpg WIDTH=260 HEIGHT=309 ALT=SAP BORDER=0>
         </TD>
    </TR>
    </TABLE>
    </P>
    </BODY>
    </HTML>

    Hi William,
    if you are developing JSPs for the EP, why don't you use HTMLB instead of HTML?!
    Anyhow, check Access image from jspdynpage and Problem finding image
    Hope it helps
    Detlev
    PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

  • Graphics will not appear in preview

    I am working on Captivate 5 and I have slides with background audio, narrator audio and graphics that are in timed to appear during sections of the narration. Yet when I preview them they will not appear. I have tried annimations (flashing arrow widgets) as well as statice images but nothing will appear. Any suggestions?

    Hi there
    By saying "The visable box is checked off." are you saying there is a check mark so it should be visible?
    One thing I notice in your screen capture is that the animation is in the layer above a Button object. Is there a pause on the button? Assuming there is, that's the whole issue because the Animation isn't even staged to appear until 10 seconds has elapsed. Look at your Button timing.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • HTML Images not appearing in 1.4.2

    Hi
    I have a an application wich displays an HTML page in a JEditorPane (an About box for the application). This html is loaded from the hard disk which has several images on it. It worked fine with JRE 1.4.0 and 1.4.1_x versions. But since i upgraded to 1.4.2, images in the html does not appear (it displays the default image when images cannot be found) I checked the path of the images for the case sensitivity, but thet are correct
    this is the html code fragment for the image
    <img src="file://C:/Projects/images/companylogo.gif" width="199" height="82">
    Any ideas?
    Thanx in advance

    Hi - sorry not to be useful - but I wanted to register that I have exactly the same problem and it is urgent that I solve. If anyone has a solution please post it here. Please!!!!
    Txs in advance.

  • Images not Appearing after Deinstall

    We deinstalled Portal30 and the Login Server for 3.0.8 using Oracle Portal 3.0 Configuration Assistant. (9iAS 1.0.2.2). Then reinstalled. Now the images appear when we go to the gateway.htm page but do not appear on the Oracle portal30 or portal30_sso dad pages. If we right-click over the placeholder for where the image is supposed to be and do a 'View properties' for the image we get 'Forbidden You do not have permission to access /images/image_name' on this server - Oracle HTTP Server Powered by Apache/1.3.1.2 Server.
    at tmds06 Port 80. Does anyone know what configuration file or permissions file controls this?
    Joyce Fowler
    [email protected]

    The /images alias is set in the <ORACLE_HOME>/Apache/modplsql/cfg/plsql.conf file.

  • Images not appearing/printing in PDF properly

    I'm working in CS4. I never had this issue in the past, but now when I save files as PDFX1a some of my images do not appear when printing. I can see them in the PDF, but they print as a white silhouette. I did embed the images.

    Where is it you want the navigation to appear?
    Try this CSS -
    #mainnav {
    clear: both;
    display: block;
    float:right;
    margin-right:50px;
    margin-top:25px;
    overflow:hidden;
    padding:0;
    width:350px;
    Is that anywhere close?

  • Images not appearing

    THe images that I have added appear in live design mode; however, when I copy the HTML code into Constant Contact, the images do not appear in the email I send.
    this is a screenshot of my code:

    Images need to be hosted on your remote server with absolute link paths to the source file -- http://yourdomain.com/image.jpg.  Also keep in mind that many e-mail clients don't display images for security reasons.   Alt-Web Articles, HTML E-mails and Newsletters.
    Nancy O.

  • Images not appearing in Nakisa Org Hierarchy or Position Hierarchy

    Hi,
    I have configured Nakisa Org Structure to show photos of a few employees. The photos have been saved in the images/Portraits folder and are of the same size as the rest of the photos in this area. I have also pointed Nakisa Images to this folder in the Application wide setting. Also, I have used the Details Designer in OrgChart--> Position and edited the Images section to point to EmpDetails2 --> Personnel Number. I have also ensured that the photos have been saved as Personnel Number.jpg. Also, in the Position Hierarchy, I have done a similar mapping.
    However, the photos are still not appearing despite having published the Org Chart several times.
    I would really aprpeciate a quick response from you.
    Thanks,
    Vibhu

    Hi Vibhu,
    Have you checked the XSL files that control the images? I believe they are EmployeePictureXSL.xsl and EmployeePictureCondensedXSL.xsl. You might need to amend them to fit your solution.
    I hope that helps.
    Luke

Maybe you are looking for