Images not centered properly

I'm having a bit of an issue with the centering of a picture in imovie, i drag and drop the image into i movie, (on the timelin and clips) but for some strange reason the picture is or becomes off centered, in fact any pictures i drag n drop become off centered, if i open these pics outside of imovie the pics view centered (normal). Is there some kind of setting i switched? things were working normally today, (pics were centered). I installed Apple X11 today to use Gimp (image editor) after this install the pics became off centered,i wouldnt think this installation would have an effect in imovie.. could it ?? weird...
Message was edited by: Plntrmist

thank you sooooo much!!
it was actually off, then i turned it on and it must have reset itself! now i know!
all images are centered!!!!
thanks again!!!!!

Similar Messages

Crystal Report Toolbar images not displaying properly in IE?

Hi,
I am using VisualStudio 2012 ,crystal report version 13.0.2000.0 and sp5.
My problem is that after loading crystal report, toolbar image icons (such as print,export etc) are not showing properly in internet explorer(version ie10). But it is displaying correctly in chrome and firefox.
What could be problem ?? Any help will be appreciated ..

See this re. images:
Visual Studio 2012 Crystal Report not working on Windows Server 2012/ 0x800a1391 &#8211; JavaScript runtime error: &…
Also, don't forget to do your own searches - search box is in top right corner and simple search strings are best. E.g.; 'Crystal net red x'.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on
Twitter

Images not displayed properly

[Migrated from the Syclo Resource Center]
prashanthi_vangala   01/03/2012 06:44,
Hi,I am working on Agentry 5.4.0I have a list screen where for one of the columns I have a rule to display images ( I use checked and unchecked images ). Earlier the images were getting displayed properly on the ATE but it is not working now and I did not make any changes to the image properties then.But after this, I tried couple of things with the image properties to make it work, like when I do not use any mask colour the image does not get displayed but when i use any maks colour the image gets displayed but its completely blacked out ( and thus for checked image, cannot see the check mark and its completely blacked out ).I face same issue with the login image as well. I added a new Image ( Logo ) to my App for the login Screen, but even this image does not appear on the login screen.
I also tried deleting the Dev folder and re-publishing, but even this does not work.
-Prashanthi
Jason Latko   01/03/2012 11:42
Try deleting the Application directory under your development server where the images reside and publish again.
Completely clear your ATE and transmit again from scratch.
Also, what mask color are you using?
Try using a green hugh and not black or white for the mask.
Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/03/2012 12:38
Hi Jason,Thank you for the reply.I already tried all the things you have mentioned, but the same issue exits still.
Prashanthi
Jason Latko   01/03/2012 12:40
Is it just the ATE, or do you have the same problems using the WIn32 or PPC clients?
Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/04/2012 06:21
Hi Jason,Behaviour in ATE:I have changed the image now and tested with the new image . Now, its behaving strangely:When I do a sync after publishing or a reset of ATE; I see the new image properly displayed on the screen but when I leave the screen and come back to the same screen again, the new image is getting replaced by the old image ( atleast the old image is not displayed properly, it appears like a black square box..and because of the same issue I had with this image I switched to the new image ). Behaviour in Win32 Client:When I tested with the client, I see the new image properly for the first time and when i leave the screen and come back the image disappears..This is the behaviour in client.
Please suggest.
-Prashanthi
Jason Latko   01/09/2012 11:35
Prashanthi,What did you use to create these images?
They are simple bitmaps I assume?
Try creating some very simple images using Microsoft Paint, then set a mask of green in Agentry.
Your problem sounds familiar, but I can't find a matching bug in our database.
Maybe someone else has experienced this?
You could also try upgrading to a newer version of Agentry to see if the problem goes away.
We are currently on version 6.0.4.Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/11/2012 10:02
Hi Jason,
Thank you for the reply.
But strangely, from past few days I see that the image is working fine again.
But kept this topic open because it was wierd, that the image is working correctly again without making any major change. What I did was to just write the rule again which calls the image ( though i did this before and did not work then but worked now ) and to observe the image behaviour for few days.But it seems like it is fine now.
Thanks and Regards,Prashanthi

We am using "jv:imageButton" tag for displaying the image and below is the tag code,
<jv:imageButton styleClass="buttonStyle"
selected="true"
onclick="networkCanvas.setInteractor(clientSelect)"
image="../oracle/communications/inventory/ui/images/arrow.png" buttonGroupId="interactors"
rolloverImage="../oracle/communications/inventory/ui/images/arrowh.png"
selectedImage="../oracle/communications/inventory/ui/images/arrowd.png"
title="#{inventoryUIBundle.SELECT}"
message="#{inventoryUIBundle.SELECT}" />
The able code is present in the below path,
..\public_html\oracle\communications\inventory\ui\network\page\NetworkView.jsff
The images are present in the following path,
..\public_html\oracle\communications\inventory\ui\images\zoomrecth.png
I am not thinking this is a Platform Beta 3 uptake issue. And I am suspecting an issue with integration of ilog with ADF. Any help in this regard would be helpful.
regards,
Chandra
Edited by: user638992 on Feb 25, 2010 3:40 AM

Images not displayed properly.Any advice on that?

Hi,
I found the following code inside the forum and i'm trying to understand it.
It appears to be a problem though. In particular the images(chess-pieces) are not displayed properly. The background of the gif images should be transparent but is not. Any advice?
Thanks
Here is the code:
import java.awt.*;
import javax.swing.*;
public class ChessBoard10 {
static final int PAWN = 0;
JFrame frame;
JComponent[][] checker;
public ChessBoard10() {
frame = new JFrame("CHESS GAME");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Container con = frame.getContentPane();
con.setLayout(new GridLayout(8, 8));
checker = new JComponent[8][8];
for (int row = 0; row < 8; ++row) {
for (int col = 0; col < 8; ++col) {
JComponent p = new JPanel();
p.setBackground(setColor(row, col));
checker[row][col] = p;
con.add(p);
frame.setSize(500, 550);
frame.setVisible(true);
Color setColor(int y, int x) {
Color c;
if (y % 2 == 1) {
if (x % 2 == 1) {
c = Color.white;
} else {
c = Color.black;
} else {
if (x % 2 == 1) {
c = Color.black;
} else {
c = Color.white;
return c;
public void setPiece(Piece pc, int row, int col) {
JComponent p = checker[row - 1][col - 1];
//one base -> zero base conversion
if (p.getComponentCount() > 0) {
p.remove(0);
p.add(pc);
p.revalidate();
/*test*/
public static void main(String[] args) {
int Bpawn = 0,
Bbishop = 1,
Bking = 2,
Bknight = 3,
Bqueen = 4,
Brock = 5,
Wpawn = 6,
Wbishop = 7,
Wking = 8,
Wknight = 9,
Wqueen = 10,
Wrock = 11;
ChessBoard10 cb = new ChessBoard10();
for (int i = 1; i < 9; i++) {
cb.setPiece(new Piece(Bpawn), 2, i);
cb.setPiece(new Piece(Wpawn), 7, i);
cb.setPiece(new Piece(Bking), 1, 4);
cb.setPiece(new Piece(Bqueen), 1, 5);
cb.setPiece(new Piece(Bbishop), 1, 3);
cb.setPiece(new Piece(Bbishop), 1, 6);
cb.setPiece(new Piece(Bknight), 1, 2);
cb.setPiece(new Piece(Bknight), 1, 7);
cb.setPiece(new Piece(Brock), 1, 1);
cb.setPiece(new Piece(Brock), 1, 8);
cb.setPiece(new Piece(Wking), 8, 4);
cb.setPiece(new Piece(Wqueen), 8, 5);
cb.setPiece(new Piece(Wbishop), 8, 3);
cb.setPiece(new Piece(Wbishop), 8, 6);
cb.setPiece(new Piece(Wknight), 8, 2);
cb.setPiece(new Piece(Wknight), 8, 7);
cb.setPiece(new Piece(Wrock), 8, 1);
cb.setPiece(new Piece(Wrock), 8, 8);
class Piece extends JPanel {
String[] imgfile =
"Bpawn.gif",
"Bbishop.gif",
"Bking.gif",
"Bknight.gif",
"Bqueen.gif",
"Brock.gif",
"Wpawn.gif",
"Wbishop.gif",
"Wking.gif",
"Wknight.gif",
"Wqueen.gif",
"Wrock.gif" };
public Piece(int type) {
add(new JLabel(new ImageIcon(imgfile[type])));
}

Well, without actually testing the code which I most unfortunately can't do since my real computer is chrashed at the moment, try checking the
boolean Component.isOpaque();otherwise try using .png's instead altough it shouldn't matter.
This is just some general advices =(

Edited hyperlinked shape images not hyperlinking properly when published

At my website:
www.trianglepolysteel.com
I've tried to add and edit hyperlinked shape images at the top of the page, namely "The PolySteel Systems" and "FAQs". No matter what I do--bring to front, recreate a brand new image, copy and paste one I know works--the published version does not hyperlink properly. I unselect "make all hyperlinks inactive" in the hyperlink inspector pane, rollover my mouse to ensure that all buttons take me to the proper place, then click them to prove it. Works in iWeb, not on the published page.
Does anyone know how iWeb creates the code? When I save changes I've made, does it rewrite code for the entire page, or does it plug in edits at the end of the existing code? When I go in to view source in safari, it looks like it put the two edited/added images in a different location.
Help! Visitors/potential customers are missing a valuable link on my site.
Bradley

OT,
Yes, each is its own image, as making one text box and hyperlinking each word/phrase results in the unchangeable (arrrgh!) grey underlined text that changes to red on rollover.
I've already been experimenting with exactly what you mentioned. I just tried shrinking all the image boxes, without encroaching on the text, so they would clearly not overlap. I'm publishing to me.com for these experiments so I don't have to keep publishing the entire site to a folder, then ftping to my server. Here's the page I just experimented with:
http://web.mac.com/bradleyoder/iWeb/Triangle%20PolySteel/WhatIsPolySteel.html
In iWeb, all links are good to go, no overlapping, etc. Curiously enough, on this page, there are even more dysfunctional hyperlinks with those image boxes.
Any further thoughts?
Bradley

Interactive Image Not Centered

When I add a new interactive image to a page, then drag-and-drop and image into that widget, the image is not centered within the frame. Rather it is skewed toward left-of-center by about 10%. Changing the image scaling doesn't fix it. Changing the outer dimensions of the widget doesn't fix it. Nothing I've tried will make an image appear centered within the interactive image widget. Any ideas?
Note that I've tried this only with landscape oriented images on a landscape oriented page -- so I don't know if the issue exists for portrait mode images.

Hi Schwerd:
Yeah. I just tried it with a portrait oriented image, and it shifts up in the frame. So what I'm seeing is that, if the image is wider than it is tall, it shifts left of center. And if it's taller than it is wide, it shifts up.

Poster image not centering in browser

My poster image (for viewing in IE8) is not centering in the browser window. It's displaying as left aligned with a big gap to the right of the image. How do I fix?

Thank you Hemanth, that is exactly what I am referring to. One final question though, as I am by no means an HTML guru...do I add the snippet while I'm in Edge or do I open the HTML file in Dreamweaver and add the code there?
If in Edge, where do I access the code to add it (and where does it go)?
If in Dreamweaver...here is the code for my file, where would I place the snippet?
<!DOCTYPE html>
<html>
<head>
          <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
          <meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
          <title>Untitled</title>

    <script type="text/javascript" charset="utf-8" src="FEA2014_Invite_edgePreload.js"></script>
    <style>
        .edgeLoad-EDGE-450331542 { visibility:hidden; }
    body {
          background-color: #000000;
    </style>

</head>
<body style="margin:0;padding:0;">
          <div id="Stage" class="EDGE-450331542">
          </div>
</body>
</html>
I GREATLY appreciate this advice!
Many thanks,
James

Image not rendering properly on timeline

I'm working on an animatic using still images. Occassionally, I need to scale in or move the image a bit. This means FCPX has to render the image, which it usually does, but I am finding that in some cases, the image appears blurry when played at normal running speed, but when I pause, it's nice and clear. Why is the image not rendering so that it plays clear when running? The orange bar is not displayed to suggest it needs to render still.

Uh, yup, that sure solved it. Thanks Tom.

Image not centered in Mobile view?

I am working in DW CS6. Originally I set the images in mobile view to text-align: center and they did show up centered. The CSS styles panel still shows they are centered but they show up to the left side in DW CS6. However when I click on F12 to see the site in the Firefox browser they show up perfectly centered. What have I done that causes the images in mobile view to show to the left side. Also when I am in DW CS6 the green overlay occasionally does not work even if I check or uncheck the "Hide all visual aids" and "fluid grid layout guides" items. Some times it does and sometimes it doesn't. What am I doing wrong? Thanks in advance.

Open your Template.dwt in code view. Remove this link.
<link href="index-heritageTemplate.dwt.css" rel="stylesheet" type="text/css">
Save.
Create a new CSS file. File > New > Blank page > CSS. Hit Create button.
It should look like this in code view.
@charset "utf-8";
/* CSS Document */
Now add your site wide content styles.
body,td,th {
color: #FFFFCC;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 36px;
body {
background-image: url(../Images/background-maroon-15.jpg);
font-size: 12px;
a:link {
color: #FCDD61;
text-decoration: none;
a:visited {
text-decoration: none;
color: #FCDD61;
a:hover {
text-decoration: none;
color: #00CCFF;
a:active {
text-decoration: none;
SaveAs myStyles.css to your CSS folder.
Go back to your Template.dwt file. Add a link to your new style sheet.
<link href="../CSS/myStyles.css/oldeworldelace.com/Test/Templates/index-heritageTemplate.dwt.css" rel="stylesheet" type="text/css">
Remove the embedded <styles> from your template.
Save your template.
Make sense?
Nancy O.

Disk Utility Crashing and Disk Images Not Opening Properly?

Hi,
I got a new G-Tech 500GB external drive that I've got into three partitions. All of them have Tiger on them but the main one I'm using is giving me problems. I have Stuffit Expander 11 on here and when I try to open a disk image it looks like it's opening but doesn't. Also I try and open Disk Utility and it crashes on me. I did a repair disk permissions a few hours ago after restarting up again and it seemed to be fine but now the problem is back.
The other problem I have on and off is that out of the three partitions I'm supposed to put them in the trash before shutting down and sometimes the two not in use won't go in the trash.
Any ideas? The two other partitions I have right now I'm using for recovery stuff from my internal drive.
S.

Its the improper unmount of the firewire drive which is the problem. Try to reset all.
1. Shut-down your Mac, and unplug the power cord
2. Turn the power off on your external FireWire devices
3. Unplug the FireWire devices from the Mac
4. Wait for 5 min.
5. Plug the power cord to your Mac only
6. Restart the Mac while holding the Option-Apple-O-F, and keep holding until you get the ">" prompt, then release the keys
7. At the ">" prompt type:
      reset-nvram and hit the Return key
      set-defaults and hit the Return key
      reset-all and hit the Return key
the last command will restart your mac
8. Shut down your Mac
9. Connect all your FireWire devices to the Mac and turn them on
10. Restart your Mac.
All your FireWire devices should reapear, if not repeat the procedure
How to avoid the issue :
The only really proven way to avoid burning up a FireWire port is to connect all devices and to turn them on PRIOR turning on the Mac. Likely, one must unplug them and turn them off AFTER the Mac has been turned off. If you need to connect another device, then you're on for a shutdown of your machine...  It's a tad annoying but it guarantees that the FW ports won't be damaged.  Be careful when using self powered devices such as webcams, iPods, hard drives or hubs, as they can destroy the port pretty easily. Another thing is to avoid daisy-chaining hard drives.
When the FW port doesn't respond anymore :
In this case, peripherals won't be mounted upon plugging, and won't be displayed in Apple's System Profiler. The self powered devices will still be fed by the port, but won't respond either.  It happens that the PHY just hangs after a surge or a random problem. Once hung, the port will not respond any longer, it is possible to reset the component by going through the following steps :
1° boot the mac in Open Firmware by holding [ Apple key - Option - O - F ] after the startup chime.  2° you'll get to a command prompt. the keyboard mapping will be QWERTY, so pay attention when you type the following :  RESET-NVRAM (enter)  RESET-ALL (enter)  3° Now the mac should restart itself and the port should function properly again.  If it still doesn't work, then it means that the PHY is damaged.
http://www.hardmac.com/articles/16/

Images not displayed properly jv:imageButton tag

Images are not displayed jv:imageButton tag. I am able to see the images sometimes, but not consistently. I have followed the steps mentioned from the Platform RI. I was able to see the images without any problem before Beta 3/JDev R1 uptake. I had migrated my code base from D7B7/Beta 2 to JDev R1/Beta 3 env. Images were displayed correctly in the iLog, in D7B7/Beta 2 environment properly without any issue.
Any thoughts as to why this is happening.
regards,
Chandra

We am using "jv:imageButton" tag for displaying the image and below is the tag code,
<jv:imageButton styleClass="buttonStyle"
selected="true"
onclick="networkCanvas.setInteractor(clientSelect)"
image="../oracle/communications/inventory/ui/images/arrow.png" buttonGroupId="interactors"
rolloverImage="../oracle/communications/inventory/ui/images/arrowh.png"
selectedImage="../oracle/communications/inventory/ui/images/arrowd.png"
title="#{inventoryUIBundle.SELECT}"
message="#{inventoryUIBundle.SELECT}" />
The able code is present in the below path,
..\public_html\oracle\communications\inventory\ui\network\page\NetworkView.jsff
The images are present in the following path,
..\public_html\oracle\communications\inventory\ui\images\zoomrecth.png
I am not thinking this is a Platform Beta 3 uptake issue. And I am suspecting an issue with integration of ilog with ADF. Any help in this regard would be helpful.
regards,
Chandra
Edited by: user638992 on Feb 25, 2010 3:40 AM

Tiff images not display properly

After installing iPhoto 6, none of the 1600 files in .tiff format imported via a Lexmark scanner are showing up correctly. (They worked perfectly well in iPhoto 5)
I get a blurred scribbled squashed image a little like a TV channel that hasn't been set correctly.
If I go back and click on the files in the Finder, they open beautifully in Preview.
This lead me to believe there was an issue with the tiff-format and I promptly converted a copy of the files to jpegs.
Unfortunately this left me with a new problem as three white lines now appear thru all the pictures in jpeg format.
Luckily I never deleted or moved the .tiff files, so I am still hoping to use those.
Will there be an Apple update which fixes this or will I have to re-scan and date/title- another (sigh) 1600 pictures? (please, someone tell me no)
Best wishes,
N

I think I found the fix.
As I mentioned in my previous post, I have also been having trouble with TIFF images and iPhoto 6.
Today I downloaded the new iPhoto 6.01 update. But, that didn't fix the problem either. So much for Apple fixing it.
Anyway, I have been experimenting, and finally found a difference between images that worked and those that didn't.
The images that worked, have an ICC profile embedded in them from the device that created the image (in my case my scanner).
So, I set out to find out if simply removing the ICC profile would fix the problem.
And, through my experimenting, I found that if I opened the image in another program, and then exported it as either a TIFF (the same format) or a JPEG that the resulting image would open in iPhoto 6 just fine.
Further examination demonstrated that the ICC information was removed from the exported file.
As I understand it, ICC is basically an image color correction / calibration tag. It enables different devices to properly display and print the image with the proper colors.
Basically, each device has a color profile (scanner, monitor, printer, camera, etc.). This is to make sure that when you see something on the screen that it looks the same as when you print it out. Likewise, you want the image on the screen to match what the scanner and digital camera saw.
So, these are essentially conversion tables to make sure that each device properly displays or prints the image as the original source "saw" it.
Anyway, not wanting to manually strip this information from each file, I looked on the Internet for an automated solution. And, fortunately I found one.
http://www.colormanagement.com/technicalresources/files_targets_and_utilities/mac_os_xscripts/
The file you are looking for is "Mac Os X ColorSync Toolbar Script: Remove ICC profile". Click on the title just mentioned to download the script.
It is a Macintosh Script that you simply download to your desktop (or anywhere else you would prefer). It is in a Stuffit Archive, so you'll need Stuffit Expander to decompress it (basically the Mac equivalent of a ZIP file).
Once decompressed, you should see a "script" icon that is labeled "Remove Profile".
Simply "drag" your original files and drop them onto this icon / script. The script will then remove the embedded ICC information from the image file.
Once you have removed the ICC information from your image's file, try importing it into iPhoto 6 again. Then, see if it works
It is important that you perform this on a backup / duplicate copy of your original files. You don't want to damage your only copy if something goes wrong.
Now, one further note: If you do this, you may see the image looks different. In my case, the image is truer to the way it really looked when I scanned it in. The paper texture looks right now.
If you want to do this while keeping the image's appearance the same as it looks now, then here's another way:
Open the file in Apple's "Preview" program. This is usually the default image view.
Then, do a "Save As" or "Export" to create a new copy of the image. If you perform an Export, be sure to set the image quality high or you may inadvertently reduce your pictures detail (especially if you export to JPEG).
This essentially does the same thing. But, it will take more work if you have multiple images.
Using the previously mentioned script, you should be able to drag and drop multiple files in a group.
Anyway, I hope this helps the rest of you out.
Let me know if it fixes the problem for you as well.

Google images not loading properly!!

Hey guys,
Im not sure if this is a networking problem or but here we go...
Here's my prob - Whenever i google image search something, it never loads all of the thumbnails!
Or the other prob is, when i change the search option to "larger than x" then the page just keeps loading and never loads any thumbnails at all...
Ive tried in safari and in firefox and it just wont load all thumbnails properly!
Also i just remembered that yahoo image search does the same thing!
Im on an adsl1 connection so its not like i have no speed...
Any ideas?
Regards
bb

Hello William, thank you so much for your advice! It was indeed the firewall in the modem. We turned it off & viola solved a problem that had been plaguing us for months!! Your discussion thread info was most helpful & informative. I will just add that the other confirming clue was when I went to use smile box for the first time on the new Imac & the clever little application also diagnosed the problem & popped up a message in English! asking if we had a personal firewall as smile box was not able to access the internet & then some technical stuff. So thanks for your prompt attention. Very much appreciated.
Cheers Rob & Catherine

Slideshow images not focusing properly

I am finding that if I review images in Bridge slideshow (hitting space bar) they all seem to not be focused. When I click and go the 100% view, it takes about 10 seconds to load and then it is properly in focus. I thought I could use slideshow to rate and check focus (is there a fix for this?) and is the 10 second to load at 100% normal? If I go back to filmstrip or essentials view and use the magnifier on the same image, it is in focus just as it was in 100% slideshow view. It seems only the normal slideshow view is the problem.
Jonathan

Ramon.
Here is the information you requested:
Bridge v. 3.0.0.464, PS v. 11.0.1, Mac X Leopard v. 10.5.6
Model Name:    iMac
Model Identifier:    iMac6,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.16 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    4 MB
Memory:    3 GB
Bus Speed:    667 MHz
Boot ROM Version:    IM61.0093.B07
SMC Version:    1.10f2
NVIDIA GeForce 7600 GT:
Chipset Model:    NVIDIA GeForce 7600 GT
Type:    Display
Bus:    PCIe
PCIe Lane Width:    x16
VRAM (Total):    256 MB
Vendor:    NVIDIA (0x10de)
Device ID:    0x0391
Revision ID:    0x00a1
ROM Revision:    3021
Displays:
iMac:
Resolution:    1920 x 1200
Depth:    32-bit Color
Core Image:    Hardware Accelerated
Main Display:    Yes
Mirror:    Off
Online:    Yes
Quartz Extreme:    Supported
Built-In:    Yes
Thanks again
Jonathan

Gallery images not centered

I have made a slideshow widget inside a slideshow widget and in the Muse application I have centered everything but when I publish, the images shift.
I can not figure out at all what is causing this. I have done this before in another site and it works perfect.
Any ideas what is causing this?
Here is the site: www.craigillustrations.com

After reboot...
Open terminal
devel-Su
rootme
tracker-control -r
This will completely reset it.
Reboot after then try it and report back.
If fixed, please mark this post as solution to help others find it faster.

Images not centered properly

Similar Messages

Maybe you are looking for