Images not displaying when creating an OFT in Outlook 2007

Hi, for years I have made OFTs by importing HTML I created into Outlook via "Send Web Page by E-mail" and it worked great. I updated to the latest Outlook (2013 I think) and then tried and tried and tried to get an OFT created but there were always
problems with the images.
So I went back to 2007 and used the same old method I had used before and it doesn't work anymore. When I import the HTML it looks fine but then when I select "Send Web Page by E-mail" the mail template doesn't have the images, instead a message
shows:
"This linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location."
I can't figure out how to get the images linking correctly.
Any help greatly appreciated.
~peter

Hi Peter,
In general, when we open an item that has embedded images, the images are copied to the following temp location which is then used for displaying the image:
%USERPROFILE%\AppData\Local\Microsoft\Windows\Temporary Internet Files
Outlook 2007 read which temp location is controlled by the following registry value:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\Cache
This issue may happen if the value is set to a data other than:
%USERPROFILE%\AppData\Local\Microsoft\Windows\Temporary Internet Files
Please navigate to the registry path above and check if the value date of
Cache is set correctly. If not, change it to the correct one and then test the issue again.
Note: Serious problems might occur if you modify the registry incorrectly. For added protection,
back up the registry before you modify it.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Images not displaying when using Mod_JK

Has anyone had this problem with any success?
platform:
Windows 2000 Professional
Jakarta Tomcat 4.1.3
Apache 2.0.039
Mod_jk connector
My_Sql 4.0.1
I have a successful connection between Tomcat and Apache via the mod_jk module.
All JSP's are displaying with the appropriate data from MySql.
My problem is that no images will display when I connect through Apache, via port 80.
When I connect to Tomcat direct through port 8080, everything displays properly including images.
Currently, I am running my application under Tomcat's webapp subdirectory.
Is there something that I perhaps not did properly configure with Apache's http.conf file or with
server.xml?
Any suggestions or answers would certainly be appreciated.
Thanks,
Lenny Sorey

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Images not displaying when open in Dreamweaver

Hi, my images on the page
oldfortestates.com/about_st.vincent.htm do not display properly
when open in DW however they do on the server when opened with a
browser. They are stored in the images folder in the site root. I
have this problem with all my pages...

Going back to my original comment, if you change the name
http://oldfortestates.com/images/table_bck1.JPG
(File Not Found)
to
http://oldfortestates.com/images/table_bck1.jpg
the image is there.
> However, how should I ever get all those errors fixed.
Isn't it easier to
> just make a new page.
If it were me, yes, I would start over.
>Is there a quick way for me to just create an exact copy
of my pages in a
>template page where I can after just copy and paste all
the different page
>infos into.
I am far from being the best person to give advice, I would
steer clear of
javascript menus for a start - they don't work with
javascript turned off.
There are many good ones recommended here,
www.projectseven.com and others
Start with a clean page and investigate Server Side Includes
with a good
menu (see many recommendations here) or, as you suggest (you
don't have many
pages), a template.
Make sure you save the template File > Save As Template.
>then rename the individual pages
No, create child pages from the template, giving them names.
I wouldn't
rename anything you already have, the code is... bad.
Check out your validation errors to make sure you don't
repeat your
mistakes.
You'd be wise to look at
http://www.w3schools.com/ for
HTML and CSS.
As I said, I'm not the best person to help but hope this does
a bit.
Jo
"atomic king" <[email protected]> wrote in
message
news:gjoqqr$nk5$[email protected]..
> Thanks so much Joise1 I will try to see if I can get
that image to work.
> However, how should I ever get all those errors fixed.
Isn't it easier to
> just
> make a new page. Is there a quick way for me to just
create an exact copy
> of my
> pages in a template page where I can after just copy and
paste all the
> different page infos into and then rename the individual
pages. What do
> you
> think?
>

Images not displaying when JAR alone running

HI all,
I am developing Standalone application using swings in netbeans,everthing is working fine when i run using IDE,if i took the jar alone and tried to run,it is throwing Exception,it is throwing exception at the time of displaying images.
i kept all the images in a Images folder in "src" folder,so that all the images will be mix up in Jarfile(i think) , it is running fine in IDE but not in jar
Im using imahes using URL class like this
URL lUrlLogo = Thread.currentThread().getClass()
          .getResource(java.util.ResourceBundle.getBundle(QuestionToolConstants.CONFIGURATION_RB).getString("logo"));
       Image lLogoimage = Toolkit.getDefaultToolkit().getImage(lUrlLogo);
       javax.swing.ImageIcon licon = new javax.swing.ImageIcon(lLogoimage);Uncaught Error fetch in Image
Null pointer exception..etc
can anyone solve this isssue..thankyou

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Images not displaying when selecting it from real table

Case is, I have some HTML in a table, help texts for that matter. It has some images in it defined like that:
... <img src="&COMPANY_IMAGES.picture.gif"> ...
But the &COMPANY_IMAGES. substitution does not take place. When testing, I found out that
select '&COMPANY_IMAGES. #COMPANY_IMAGES#' as working
, col as not_working
from TEST_TABLE where ID = 1
working column had both strings replaced, while not_working had not. Now the question is, whether this is an intended behaviour or not? I got my report working with the workaround of
select replace(col, '&'||'COMPANY_IMAGES.', :COMPANY_IMAGES) as col
from TEST_TABLE where ID=1
but I would like to know the exact limitations to know while planning ahead not discover afterwards... Or is there a better way to get them substituted from db columns (without the replace)?

Kaja,
Looks like intended behavior to me. There is no reason for the engine to do substitutions on data you select from a table. Your method should be fine.
Scott

JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

(Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
Re: JPG images not displayed correctly in Bridge and Photoshop

xxxxyyyyz wrote:
…If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
Just get it it out of the way, here's my setup:
Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve. Unequivocally and without qualifications.
Now, first things first: Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites". Concentrate on Photoshop. Do not try to use Bridge to synchronize anything.
The "suites" are a totally artificial construct created by Adobe bean counters and marketing types. The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries. They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
Enough said about the cause of the problem. The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
Secondly, a disclaimer: I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius. I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point). I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it. I believe my monitors are the foundation of my color management efforts.
Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle.
Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software. Stick to version2 icc profiles. Ask the manufacturer of your calibration software/hardware if in doubt.
Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site. I have learned from all of them.
My working color space is ProPhoto RGB. I choose to work with PSD and PSB files. As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web. My main output consists of prints.
I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
Following is a screen shot of some of my pertinent settings:
Note that I have never bought into the "suite" concept myself. I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
One big caveat, do not fall into this trap:
xxxxyyyyz wrote:
…I believe my problem has nothing to do with my monitor profile, for several reasons, but…
…It seems extremely unlikely to me that…
You either want to learn, or you don't. You either want to solve your problems, or you don't.
When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere. That attitude will get you there fast. Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong. You see, I am not experiencing any problem that needs fixing. I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
Good luck.
Wo Tai Lao Le
我太老了

Image not displaying in the Task Sequence Wizard. SCCM2012

This is my question, so I will post the link here.
http://community.spiceworks.com/topic/925727-image-not-displaying-in-the-task-sequence-wizard-sccm2012
Bryan
I captured an image from a PC that I am preparing to be deployed with Office 365. Once I captured
the image, I went to the software library to add the operating system image. That seemed to go on without any issue, but when I look at the summary, I see the big yellow globe saying "in progress" it has not changed since yesterday afternoon.
I then created the task sequence for this image
to be deployed under Software Library, Task Sequences. When I selected the references tab, everything seemed to be in order with the exception of the "operating system image" under type. It was/is showing 0.0% Compliance.

So, the problem described in the other forum post does not match the title of this thread. Are you trying to address two different things? These are unrelated btw.
For the issue in the other thread, you'll have to troubleshoot your content distribution to the selected DP. The distmgr.log and pkgxfermgr.log (assuming you chose to distribute the image to a DP directly attached to your primary site) are the places to
start and will show you exactly what's going on.
As for the title of this thread, we'll need a lot more info to help you there.
Finally, I would suggest you copy your questions from other sources into the thread -- this will help other folks in the future that may stumble upon this thread and will prevent any confusion.
Jason | http://blog.configmgrftw.com | @jasonsandys

Why is it when I add photos from iPhoto onto an iMovie project, it is not displayed when I play the movie from beginning to end, although I can see it in the (edit) format?

Hi everyone,
I'm just wondering why is it that when I place an image from iPhoto to an iMovie project, it is not displayed when I play it from beginning to end in fullscreen playback mode? However, when I exit it on the timeline, it is shown. All I did as drag it from the iPhoto column and place on at the beginning. I would really appreciate someones help because I really need to be able to place images onto my projects. Thanks!

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

CF slows down to a halt ... images not displaying

My primary laptop on which I do all coding ...
- less than 1 year old
- Dell (cough) XPS M1730
- Windows XP (latest)
- ColdFusion Ver 8, developer edition.
- No other issues with laptop
Also running
- SQL 2000
- Synergy
- Anti virus etc. changed Norton daily scan and unaware that I have picked up any viruses - I was my hands very well and often
Over 6 months gradually CF has been slowly not display internal referenced <img src> tags. External work fine.
To the point now where most in our app do not display.
Then in the past 3-4 days a lot of pages when called give Firefox or IE errors:
Page will not display with too may users error.
But there aren't any others.
I go to all other web site, no issues with speed.
I just cold warm booted the machine and now while page 1 appears, page 2, login, takes minutes to appear. But on a beta server (also developer edition) it's instant.
When I go straight into the browser, it works fine, albeit no images, crashes with a known bug (missing application variable), fix it, then resume, then just sits there forever.
And there's no difference between the two machines ... well, not in "that" way.
Adding to my confusion is ... I cannot get into the CF Admin panel.
I can see it approve me, then it just spins.
Nothing has changed on machine in past weeks EXCEPT traveling when I sign in to the usual plethora of wifi and other networks but never had a problem - except luggability
I am thinking of, UGH, reinstalling Windows ... but why bother if it's working perfectly and only ColdFusion has an issue.
Now COLD booted machine for 5 minutes.
Everything seems better except CF still a BIT sluggish and still not "drawing" most images. Able to access Admin panel. Even if there images not displaying.
Anyone any ideas?

Thanks for your prompt reply ...
We scoured for a folder like that and found none.
What we DID find is that over the years of coding, we have a template count of 3,500 files in 130 folders, but the root where we start is about 1,500 files. 144 megs total size though.
That shouldn't be too much? Esp as our beta and production servers are using the same amount with no issues.
Admittedly production is CF 7.X.
Much more powerful machines but still.
It would have made sense as that is the only thing on the machine that has "grown" ... but no luck.
Does remind me of the day when our mail server got hacked and we had 100,000 outbound in the spool. That was fun.: :)

My edited photos will not display when clicked on, a large triangle with exclmation comes up

my edited photos will not display when clicked on, instead a large grey area comes up wiht a triangle /exclamation sign.

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/">iPhoto Library Manager</a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

T400 Images Not Displaying Correctly On External Monitor

One of our users has a T400 laptop (6475-FM4) with Windows XP Professional installed on it. He has an external monitor that he has plugged in to his laptop which he is using to extend his desktop.
If you open up a document (say Word or Excel) that contains images and view it on the laptops screen you can scroll up and down the document and the images are displayed OK.
If you open the document on the external screen then the images are displayed when you first open it, but as soon as you scroll up or down all you can see are the place holders for the images. If you move the document back to the built-in screen they display correctly.
What have I done so far?
I have updated the Chipset drivers and the actual Graphics/Video drivers and the issue is still the same.
I have tried turning down the Hardware Acceleration but that did not resolve the problem.
I've made sure that the Field codes option in Word is not ticked (suggestion found via Google)
I've made sure that the Picture placeholders option is not ticked in Word (again found on Google)
I've searched the internet for other possible solutions and can not find any.
HELP!

one more point to add...i installed windows using bootcamp, and through windows the 2560X1440 resolution works. so its not a hardware problem either

Module borders not displaying when using Aggregator

I am using Captivate 4. I created a TOC for both modules in a project. Then I created an Aggregator to connect them and display both TOCs.
The issue I am havving is that the individual modules have borders on all 4 sides, yet they do not display when using the aggregator. How do I correct this?
Thank you.

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

OBIEE 10G Embedded Image not displayed on PDF

Hi
We have some embedded images (source on network share or on the webserver) on a dashboard. On the screen the images are displayed without problems.
But if we want to print the dashboard (f.e. PDF) the images are not printed. In html-view the images would be displayed.
Is there a known bug that images can't be printed on dashboard pages or do we have to embed them different?
Thank you

Hi Team,
I do face the same issue of image not displayed in only pdf output format. Our client has deployed OBIEE 10.1.3.4.1 using Weblogic application server and is accesible through a secured url access.
I have followed the fmap syntax to locate the image, also made sure the image is getting accessed through url, tried with different images of different sizes . In all cases the image display is appearing fine in HTML & Excel output. But not getting displayed only for pdf output.
Can you please help me with this regard if am missing any specific setup for pdf output. Is there is any pointers or documentation available to get around this issue.
Thanks in advance.

OBIEE 11G Embedded Image not displayed on PDF

Hi
I have some embedded images on a dashboard. On the screen the images are displayed without problems.
But if we want to print the dashboard (f.e. PDF) the images are not printed. In html-view the images would be displayed.
All the images are referenced with the fmap path.
Any way to print the images in the pdf ?
Thank you
obiee 11.1.1.5
O.S : Oracle Linux 5.6 x64

Hi Team,
I do face the same issue of image not displayed in only pdf output format. Our client has deployed OBIEE 10.1.3.4.1 using Weblogic application server and is accesible through a secured url access.
I have followed the fmap syntax to locate the image, also made sure the image is getting accessed through url, tried with different images of different sizes . In all cases the image display is appearing fine in HTML & Excel output. But not getting displayed only for pdf output.
Can you please help me with this regard if am missing any specific setup for pdf output. Is there is any pointers or documentation available to get around this issue.
Thanks in advance.

Images not displaying when creating an OFT in Outlook 2007

Similar Messages

Maybe you are looking for