Images not re-sizing to fit photo frames

When I insert images onto my keynote pages they do not re-size to fit the photo frame. I cannot find an option to make them fit . Also, unlike the text boxes, I cannot alter the photo frame.
I am using iWork v3.0.2 that I bought with an older mac. I have upgraded my mac and am now on My OSX is 10.5.8
Do I need to upgrade iWork to make this work?

Hi cakeboy,
Sorry to learn that you're having trouble re-sizing your pics for Keynote.
Firstly, I would suggest up-grading to at least iWork '08.
Secondly, try using http://img243.imageshack.us/content.php?page=done&l=img243/4979/picture1fv.png&v ia=mupload which will re-size images to suit various applications.
If you click on the 'Slide size' bar, this should allow you to open a slide page that best suits the size of slide you wish to install. If your slides are large, then I would suggest 1920 x 1080 (pixels)
Hope this helps.

Similar Messages

My ipod touch resizes images incorectly, how do i fit to frame?

When transfering images I have on my computer to my ipod (via itunes sync) i notice that images get cropped/resized incorectly.
In landscape mode a bit of the bottom and top portions of image get cropped off.
How do i stipulate that images should be resized to fit to frame (i.e blak border added on the sides rather than cropping from top and bottom).
or do i have to manually resize each image to fit iPod screen size?

lllaass,
thanks for the response, do you know if i would ihave similiar issue if i transfer images via the import option
(right click ipod device and select import).
Thanks
ronen

Images not importing? All past photos are gone.

For some reason, I cant import any photos to my external hard drive. When I try to, it loads so slowly and when the photos start showing up, I get an error saying that "Lightroom has encountered problems reading this photo."
I can import directly to my computer's (PC) C drive just fine and the external has a little over 100 GB's available. The day before this happened, I imported photos just fine. Whats even weirder is that ALL my photos in Lightroom "cannot be found".
Can anyone tell me what the heck is going on??

"Lightroom has encountered problems reading this photo."
This usually means that the photo is corrupted. The most likely culprits are a bad camera card or bad card reader, but any piece of hardware (hard disk, memory, USB cable, USB port) can be the cause.
ALL my photos in Lightroom "cannot be found".
This means that you have moved or renamed or delete the photos (or the folders that contain them) outside of Lightroom. To fix the problem, see: Adobe Lightroom - Find moved or missing files and folders

Sony dpf-d810 how to get facebook pictures to load on photo frame. get ? photos.

How to change facebook stored photos to use on a sony s-frame dpf=d810. I only get a large question mark. Is there a program I can use to access my own phots stored only on facebook. My computer crashed and I dont have them stored anywhere else.

If a question mark is displayed in index view, the thumbnail data or image file itself may not be supported by the photo frame. If the images are in an unsupported format, then it may be required to convert the files to one of the supported file formats before using them in the photo frame. Refer to page 33 of the supplied operating manual for information regarding the compatible image file formats.
http://www.docs.sony.com/release/DPF-D700_D710_D720_D810_D820_D1010_D1020.pdf
If my post answers your question, please mark it as an "Accepted Solution.

Since upgrading to the new firefox, pictures on facebook do not load automatically. I have to click on the frame and select view image in order to see the photos. Do you have a solution to make the photos autoload?

Since upgrading to the new firefox, pictures on facebook do not load automatically. I have to click on the frame and select view image in order to see the photos. Do you have a solution to make the photos autoload?

https://support.mozilla.com/en-US/questions/891839

Scanned images won't fit photo boxes in book

Hi.
Well, I am working on a book filled with letters from my grandparents (Old Toad, thanks for your earlier help). I've tried scanning them in and then placing in the boxes, but they are being cut off. When I try cropping at the 4x3 image, I still loose the images. Is there anyway to prevent this from happening?
Thanks in advance!

If you don't see any cutting off of the scanned images in a frame you shouldn't have to crop them. There's an option when you Control-click on the photo in the frame to "Fit to frame". If the photo is 4:3 I think it will be scaled up to fit the window exactly. If it's not then the larger size is scaled up to fit, leaving more white space on the shorter side. It's a minor thing, mostly aesthetic in nature.
Before completing the ordering process I suggest to find and copy the pdf file that is produced by iPhoto for uploading and printing to review carefully. Just to be on the safe side. Here's how:
How to Find the iPhoto Generated PDF File:
1 - Start the ordering process and stop after the book has been assembled and you get to the Order pane where you select the cover color, copies, etc.
2 - Go to the Finder and select the Go->Go to Folder menu item (CommandShiftG).
3 - copy the following, “/private/var/tmp/folders.501/TemporaryItems/iPhoto” (for Panther the path is "/private/tmp/501/TemporaryItems/iPhoto“), and paste into the Go to Folder search box.
4 - the iPhoto folder will be brought up. In it will be the PDF file that was generated by iPhoto. You can copy it (Option-drag) to the Desktop to review and/or save.
Note: the iPhoto folder will not exist before you start the ordering process and is deleted after the order is completed or after you cancel the order and quit iPhoto.

Iphoto Books: How to Enable "fit photo to frame size" when theme grays it out by default

Don't know if this has been posted before or not, but I've been using the "Modern" Theme in iPhoto books and trying for the life of me to figure out how to get my photos to not crop while they're in a single-photo framed layout (I'm not using 4:3 photos; mine are 8.5" by 11"). Even fully zoomed out my photos cut off at the top and bottom. I knew about the "fit photo to frame size" option but the theme had it greyed out--except for on one page, in which it was already enabled. So I must have done it before without paying attention, but it took forever to figure out how to do it again.
Here's how:
1. Open up the page you want to modify. I'm assuming here that your photos are already placed, but if not, place the photo you want to use.
2. Click the Layout tab.
3. Change the layout to the single page full bleed option--no frame. Your photo should now be blown up across the page.
4. Right click the photo. The "fit photo to frame size" option should now be available for you to check off. Go ahead and activate it.
5. Change the layout back to the single photo framed option. Your photo will now fit inside the frame, although to truly see the whole thing you have to open up the Options tab and select the borderless option.
To save time in steps 1-3, and step 5, you can also change the layout of all your pages at once by clicking page 1 (not the cover, the next page), then opening the Layout tab, then selecting the layout you want. You still have select the "fit photo to frame size" individually for each photo.
Hope this is useful for people.
- Jake

There is an option for the Initial View that is "Magnification:" "Fit Page". And this works for the initial page when the PDF is opened and it does not matter what the page size it, Acrobat/Reader will automatically fill the screen with the page. If you want the zoom type to change with each page then you need add a page open script to each page to set the pages zoom type to "zoomtype.fitP"
this.zoomType = zoomtype.fitP;

Photos doesn't shows up on webpage, prompt "Image not available"

photos can't show on ebay webpage, instead a black box with the word "Image not available". Tried to reinstall Firefox, but problem is still the same.
Error console shows:-
Error: uncaught exception: [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIDOMLocation.hostname]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://searchshield/content/avgls-active.js :: avg_ls_nodeinserted :: line 85" data: no]
== URL of affected sites ==
http://cgi.ebay.com/Rare-Pyn-Up-1-48-PB4Y-2-Privateer-Nose-Art-Decals-/290446723348?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item439ff94914

Try to disable or uninstall all AVG extensions and toolbars.
See [[Troubleshooting extensions and themes]]

Center images within a photo frame

I saw a friend's site where it used a pre-bought package. It
had nice photo frames and a sutle drop shadow.
The site I'm working on has a lot of photos and I would like
to set them off this way.
What I did was make the frame with a drop. Drop shadow isn't
looking good even though I did a .png Anyway, I made the frame the
background image-ok. Now I want to center the photo within the
frame. The photo info is in the page as the owner wants to change
it. Its a <img> tag. I tried doing a align center in the
<img> but that didn't do it.
Somehow that program did it. I believe it was done with CSS.
Anyone know?

phrarod wrote:
> Funny. Its a whole website package. I'm sure I could
make just that part. Here's an example:
>
>
http://www.vintagemotoring.net/image-gallery/vintage-motoring-events/?album=1&gallery=2
>
Thats a complex piece of positioning using css. I'm pretty
sure youre
not going down that route as it would be beyond your
capabilities given
what you have said to date.
So I would forget that and show us the code you are using to
create YOUR
version of this. This effect can be achieved with a lot less
complexity
than the example you provide above.
Below is an example. You'd need to know something about css
to
understand it. Basically you would create a <div>
container and use a
background image for the drop shadow, then insert the main
image within
the container, style and position it with css.
At the moment in the example below the image appears to be
off-centre
but when the drop shadow background image is added it will be
centered
in the <div>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<title>Untitled Document</title>
<style type="text/css">
#thumbWrapper {
width: 263px;
margin: 0 auto;
.thumbImage {
width: 122px;
height: 87px;
border: 1px solid #999;
float: left;
margin-left: 15px;
display: inline;
background-image: url(dropShadow.jpg);
background-repeat: no-repeat;
.thumbImage a {
width: 110px;
height: 75px;
display: block;
border: 4px solid #fff;
.thumbImage a:hover {
border: 4px solid #999;
a img {
border: none;
</style>
</head>
<body>
<div id="thumbWrapper">
<div class="thumbImage" style="margin-left: 0;">
<a href="#"><img src="lake_maggiore.jpg" width="110"
height="75"></a>
</div>
<div class="thumbImage">
<a href="#"><img src="lake_garda.jpg" width="110"
height="75"></a>
</div>
</div>
</body>
</html>

Sequencing images in iphoto slideshow for photo frame playback via flash drive

I have created a slide show in iphoto and saved it to a flash drive. I want the show to play in a particular sequence. On the computer that works. When playing the show via the flash drive on my Pandigital Photo Frame, however, the images randomize. The images have numbered filenames, and the shuffle function on the photo frame is turned off. What do I need to do differently?

When I connected the frame to the computer, no photo files showed, not even when I added the flash drive to the frame.
The sequence of the files on the flash drive is numerical, just what I am after. Something seems to be happening within the frame. In addition, while I have placed no files into the frame's internal memory, and none show up, when I play the slideshow, files that I once had in the slideshow file but later deleted, still appear!?

In my itunes tab is images / photo disappeared. . can not get it back, so now I can not get pictures on my iphone??? I do not want to use the photo stream. there are others who have experienced this tab disappears

in my itunes tab is images / photo disappeared. . can not get it back, so now I can not get pictures on my iphone??? I do not want to use the photo stream. there are others who have experienced this tab disappears

Make the iTunes window wider.
It is on the far right.

I am not able to download my photos from my iphone 4 to image capture or iphoto. Help?

I am not able to download my photos from my iphone 4 to image capture or iphoto. i am able to see the jpg files but not see the preview and when i tried downloading, it says error. what can i do? i didnt have such a problem previously pls advise. Thank you

can you tell us the error? difficult to help you without more information.

Why does the image not open in Elements when I opt for Edit in Photoshop Elements 11 from the Photos tab in Aperture?

With an image in Aperture, when I got Photos one of the options offered is "Edit in Elements Photoshop 11", but although selecting this opens Elements, there is no image and it is necessary to open the image in the normal way from within Elements. Other plugins, e.g. from Topaz work superbly from within Aperture. I am puzzled to know the reason, and in particular if there is any setting in either Aperture of Elements that need to be attended to. I would be very grateful for any suggestions.
Barry Willcock

Hi Frank, and many thanks. I can now get the picture into Elements, and work on it. However, when I have finished, I save it (giving it another name that I can recognise if the amendments are slight) it puts the file back into the same folder, but I have then to import it into the Aperture library in order to see it back in Aperture. Not a big problem, but an interesting one.
Again, many thanks
Barry

Photo Booth won't open ... crash log says "image not found"

I had a new hard drive installed on my MACBOOK. When i got it back, photo booth was not on my mac anymore.
I got the app and put in on my mac and then when i try to open it, it doesnt do anything. THe crash log/console says:
OS Version: 10.4.11 (Build 8S2167)
Report Version: 4
Command: Photo Booth
Path: /Applications/Photo Booth.app/Contents/MacOS/Photo Booth
Parent: WindowServer [81]
Version: 2.0 (70)
PID: 469
Thread: Unknown
Link (dyld) error:
Library not loaded: /System/Library/Frameworks/ScriptingBridge.framework/Versions/A/ScriptingBridge
Referenced from: /Applications/Photo Booth.app/Contents/MacOS/Photo Booth
Reason: image not found
And the Console log says:
Library/Logs/CrashReporter/Photo Booth.crash.log
dyld: Library not loaded: /System/Library/Frameworks/ScriptingBridge.framework/Versions/A/ScriptingBridge
Referenced from: /Applications/Photo Booth.app/Contents/MacOS/Photo Booth
Reason: image not found
Jan 2 09:50:56 jamie-giglios-computer crashdump[470]: Photo Booth crashed
Jan 2 09:50:56 jamie-giglios-computer crashdump[470]: crash report written to: /Users/jamiegiglio/Library/Logs/CrashReporter/Photo Booth.crash.log
(timer):Null value
[395] http://discussions.apple.com/resources/merge line 4046: ReferenceError: Can't find variable: tinyMCE
Any help please?

I got this same message from having installed Leopard (10.5)
and then because the "great Check Point VPN" software doesn't support Leopard I reinstalled Tiger (10.4) from supplied CD's
Yes, photo booth left on my machine was version 2.0.1
and will NOT run under Tiger
1) first, using Finder, locate your "photo booth" and rename it [or delete it]
2) using Os X tiger cd 1 find the "Install Bundled software only" icon
3) Pick "custom install", then expand the "Bundled Applications" until you see Photo Booth
4) click ALL of them off, except leave Photo Booth flagged [when I pick it, office 2004 TEST drive turns on too, unflag that too]
5) Press the Upgrade button [don't select easy install, as that will install EVERYTHING]
6) Photo Booth shows in your Dock and it works

Elements 9 does not accept or process RAW photo images taken with a Nikon D7000.

Adobe elements 9 does not accept or process RAW photo images taken with a Nikon D7000. I called support for a download patch and they said I had to purchase a support package or essentially purchase Elements 10. I can't believe that Adobe would not have a download patch for this problem as my elements 9 is not very old. When I try to do the updates Adobe says the serial number of the elements 9 is not accepted for download or support even though I purchased it and registered it with Adobe.
Is there any solution to this?
Thanks.

Thank you but still having a problem. I go to the edit menu>>help>>update>>check for updates and an update to 9.03 comes up as the only update, no camera raw update. It starts to download and then stops and says to close organizer and/or editor then starts back up and stops again saying "error installing this update. Close and contact customer support". When I called customer support earlier that's when they said they don't support 9 only v. 10 and did I want to buy support or a new program v10 to get camera raw processing for the Nikon D7000 RAW. Apparently I'm doing something wrong in the update procedure but don't know what. The camera raw version is 6.5 in my elements and understand that camera raw v. 6.7 is the update to process the images. Any ideas? If I uninstall and reinstall does the serial number still work on the reinstall?
Thanks for help.

Images not re-sizing to fit photo frames

Similar Messages

Maybe you are looking for