Images Not Reflecting Slider Changes Anymore

I was editing photos in Lightroom 3 last night. I created a User Preset and had applied it to about 15 photos. As I was working on the last one I noticed that the first 10 or so did not look like the preset was applied anymore. The remaining 5 still looked as I expected.
For instance, the preset had quite a warm tone, but it had now lost it on those first 10 photos. When I looked at the sliders in the develop module, they showed the values dictated by the preset. I found this very confusing and reset all sliders on one of the effected photos. I then re-applied my preset and it still didn't look as I was expecting.
I thought maybe my preset was messed up so I applied it to a photo that I hadn't edited yet and it worked properly.
Some of these images I edited in Photoshop CS4 as well. Even their TIFs are not showing the effects of the preset (inside, and outside of LR).
I'm super confused and would love someone's help. I'm assuming I have inadvertently applied some setting to those images, but for the life of me I can't figure it out.
Advice?
Hemant.
http://www.naiduphotography.com
http://twitter.com/naiduphotog

Some points to check:
Are images uploaded to server too?
Is the address in the src attribute of the img tag correct? (e.g. <img src="/images/picture.jpg" width="50" height="50" alt="some picture" /> )
First, check if the images are in the server. Let's say one of your images (mypicture.jpg) is in /images folder. Check if you can see it:
http://www.mywebsite.com/images/mypicture.jpg
If you can, than the src value is wrong in your HTML code. Put the exact url instead of the relative path into the src value: <img src="http://www.mywebsite.com/images/mypicture.jpg".... />

Similar Messages

WEBDAV rules repository not reflecting the changes

WEBDAV rules repository does not reflect the changes unless i restart the application server. i dont have a problem with file repository because i can change the file repository using the link from the BPEL console and the changes are reflected immediately from the very next instance. .
But in case of WEBDAV repository, even if i change the rules , they dont get reflected in any of the further instances unless i restart the server.
Please help on this one.

Another observation is that the entire bpel process(with decisionservice on webdav repository) works even if the webdav server is shut down.
The webdav server needs to be up only for the first instance of the bpel process. After that, even shutting down the webdav server does not effect any further instances and they all run smoothly.
This shows that the decison service builds up some kind of cache on the first call of the decisionservice. Some way to destroy this cache everytime the webdav repository changes will solve the problem.
Any help on this topic is highly appreciated.

MIME Images not reflecting in PDF

Hi All
I have inserted image in MIME Repository [ SE80- MIME Repository-BW-Customer-Images-right click-Import MIME objects] its successfully reflecting in WAD application on runtime, but when i exporting to PDFin the PDF result file the image is not reflecting. advise me on this
regards
Prashanth Shetty M

Hi,
I resolved it.
regards
Prashanth Shetty M

Changes not reflected in Change to Document (tcode CRMD_ORDER)

Hello Expert,
I made a change in field 'Planned Completion Date', in my transaction through tcode CRMD_ORDER.
When I view Change to Document (CRMD_ORDER > top menu > Extras > Change Documents), the change is not reflected.
All changes are usually captured in the Change to Document.
Perhaps it is captured somewhere else?
Please assist.
Thank you.
HJMY

Hi HJMY,
Check if the Change document object provided for CRM_ORDER has the field in the SAP provided structure. This can be verified in transaction SCDO -> select change document object CRM_ORDER and display, you will see list of structures on the left hand side, if the field you are refering to is a part of one of these structures then the changes in this field are displayed when you go to (CRMD_ORDER > top menu > Extras > Change Documents). If it is not present then you will have to create a new change document object and assign a proper structure, you can generate update program to update that change documents. Hope this helps.
Thanks,
Priyanka

Workbook in 3.5 version is not reflecting with changes made to structure

Hi Guys,
I have changed a structure in a query by removing reference in Query Designer 7.0 by adding couple of fields and Query is displaying newly added fields in 3.5 Bex Analyzer.
This query is used in a 3.5 vers workbook, but this workbook is not showing the newly added fields from the structure. While refreshing the Query in the workbook getting warning as structure has been changed and it does not exist.
Can anyone pls suggest some solution so that newly added fields gets visible in the workbook.

Hi,
In workbook design mode, try to attach same query again & then Save & execute, because from error it seems that workbook is able to sense changes in structure but unable to reflect those in workbook.
This this would resolve you problem.
Thanks & Regards,
Pradip Nikam

Browse to source image not letting me change images on a page

So - say I have an image on a page; let's call it "one.jpg". If I want to replace it with "two.jpg", I would normally just click the little folder icon in the properties menunext to the Src field, and choose the new image. Done it a million times.
But now when I do that - the image doesn't change (that is to say - the name in the "Src" field remains the same, as does the image on the page). I can manually type in "two.jpg" or I can use the little "point to file" thing next to the folder icon - but no dice doing a simple browse image.
The browse image function works normally when putting in an image for the first time - it's just when I want to change the image that this happens (or rather - doesn't happen). Anyone experienced this?
thanks…
Dave

"Browse to file" not updating existing images or links is a well known bug in CS4.
http://forums.adobe.com/message/2505480
http://forums.adobe.com/message/2564640
The workarounds are:
1) type the filename (as you have found) but that's a painful productivity killer
or
2) after clicking "Browse to file", browse up or down a folder level first then browse back to the new image that you want to change to. This "wakes" Dreamweaver up so that the correct file and path is changed.
No patch was ever issued for CS4 for this issue but it is fixed in CS5.

EAR file not reflecting the changes after successful deployment

Hi Everyone,
We have a weird situation where we deployed a EAR file in NWDS and changes got reflected in Dev portal and when pushed to QA the changes are not getting reflected.
There must be some archieving issue or unable to overwrite the existing EAR file...
Please help us out this is happening only for one ear file rest are getting deployed properly.. we are using sd

Hi,
There are possibilities that your ear is depending on other referenced application/class. I encounterred like this kind of error. In my situation the dependent/referred project/classes were not deployed correctly.(Correct version is not deployed).
My suggesstion would be in that area,so check if all the used components latest version is deployed.

Template not reflecting the change.

Hi All,
I am working on Adobe output Designer5.5 version. I am now trying to modify an existing template. The changes done to the template design are not getting reflected in the printed output. Also additional lines which are not visible on the template design are printed on the output.
Can someone please suggest on the a solution for this.
Thanks and Regards,
Benila Sophy.

Sometimes if you have objects (fields or lines for example) that get into the "unprintable" area of the form you can get really wierd results depending on the printer. If you are using subforms, be sure that -aapoff is set. If you like, send me your ifd and a sample data file and I would be happy to have a look at it.
[email protected]

Echo from WordPress post not reflecting post changes

I am developing a php site on my localhost and had been successful in establishing a Dreamweaver Binding to echo content from the site's attached blog posts to respective divs on the site's php pages. All was well until today. For some reason edit changes made to the blog post content are not be reflected to the echo content on the php pages. The echo displays pre-edit content minus the changes. This had been working for several days but suddenly stopped functioning. Does anyone have any ideas as to why.
Thanks in Advance.

You know, sometimes it only takes a night's sleep. I woke up this morning and discovered that I had not changed my database connection file back to my localhost from my remote connection. I am going to try to avoid posting questions late in the evening.

JTable CellEditor does not reflect UI changes

When I change the application font size vi a UIManager property change and call updateComponentTreeUI the font changes for everything but my JTable CellEditors. Anybody have a suggested solution.
thanks

The font change property is set with a customizer and propagated to the entire app via updateComponentTreeUI. If I don't call updateComponentTreeUI I will not see the font change. Calling updateComponentTreeUI is the standard way to propagate property changes. It just doesn't seem to work for TableCellEditors. I need to do something in addition to updateComponentTreeUI so the TableCellEditors will reflect the font customization.
Steve

Photos not saved after sharpening and denoising-shows on screen correctly but when am trying to email it, does not reflect the changes?

I have tried to change pic's like sharpen and de-noise features, on screen ot shows all perfect, but when I try to email them, all the changes are lost, anyone can help with the same?
Thanks in advance.

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

Why is the bounce not reflecting volume changes in my bass track?

I am running Logic Pro 9.1.7. I have input a bass guitar directly through an Apogee Maestro 2 using the direct input setting. When I use the mixer, all of the functions seem to work fine on the bass track (fader, volume, plun-ins, etc), but when I bounce the track the volume of the bass is still at the original input setting even though it was materially reduced (-15 db or more) in the mix. All of the other settings in the mixer (fader, plug-ins, etc) appear to be properly reflected in the bounce. Only the volume reduction seems to be missing After some experimenting it seems that the bounce may reflect an increase in volume in the mixer over the original bass guitar input, but it is hard to be sure because Logic only permits a 6db increase in volume and the bounce is being played through iTunes, so subtle differences are hard to detect. But even a -50db reduction in the bass mix produces a lound and clear bass in the bounce at the original input level.. This problem is not present for any track that was input through a microphone.
I have searched in vain for an explanation. Software glitch? Some parameter not set right? Any suggestions greatfully welcomed.

The latter. I just recorded a bass track as an audio track along with tracks for guitar, banjo, harmonica, etc. (I bounce off line so playing along with the bounce is not possible.) The thing is that the other instruments I play are all acoustic, so they go on their tracks through a mic. The bass is an electric bass guitar, and while I have an amp and could mic it, it just seemed easier to put it on a track by plugging it right into the preamp, which has an "instrument" input setting as an alternative to the "microphone" input setting.
What is so screwy about this is that the normalize function in the bounce window should make proportionate adjustments to all instruments. At least that's what the owner's manual says it does. But what it seemed to be doing is treating the directly input bass and the microphoned instruments seperately. I usually record the bass track at a fairly high input so that I can clearly hear it in the headphones as I play over the previously recorded instruments and vocals. Then I rely on the mixer to bring down the volume of the bass to a more reasonable level in the final mix. But with the normalize function on in the bounce, the bass was still coming through in the bounce at the original input level or something very close to it. That would be fine if the other instruments were properly jacked up as well so that the bounce sound like what I heard through the mixing board, only louder. But what I got was a mix with all of the all the other miced instruments sounding just like they did through the mixing board and the bass blasting away at the original recorded level notfwithstanding the volume reduction on the mixing board. Very strange. I assume this is a software bug, but now at least I have a reasonable work around. Thanks again.

Designer does not reflect Inspector changes though source does

Folks,
Don't expect I'm the first to report this but I didn't find anything about it from a forum search so better to report it then ignore it.
Making changes in Inspector for an assign, that is, deleting 2 of 7 copy statements that were initially created through the Designers/Process Map/Assign icon "add copy" function. After creating the 7 copy statements, decided to remove two, used Inspector and deleted the two. Glanced at Designer graphic of the Assign and the two statements were still reflected there. Double-checked Inspector and they were gone, as expected; checked source and the statements were also gone from source, as expected. Went to Overview, hit refresh, waited for rebuild to finish. Went back to Process map, opened Assign statement and there were still 7 copy statements rather than the expected 5, Inspector had 5 as expected, checked source, source had 5 as expected. So, overall the project has the required 5 but Designer is still showing 7. Designer is 0.9.13, Eclipse is at Version: 3.1.0
Build id: I20050627-1435
Thought you might want to know.

Thanks for the bug report. I will forward to the dev team. -Edwin

Video layers in CS6 - not reflecting file changes

we do 3D rendering, breaking images into 3D render passes that we render to a directory, then load those passes up as video layers to put them back together in Photoshop. Everyday we make 3D adjustments, render every night (to files of same name in same location), and in the morning pull up the PSD- where all the passes SHOULD have updated.
This workflow all worked fine with CS5.5 extended, but in CS6, the video layers don't seem to be automatically updating, and we're getting the prior day's definitition, while there are no indications that the file isn't found.
This problem is on Windows7 machines, and we've disabled the windows search service thinking the defnitions were still in the cache - to no avail.
Any help is appreciated- Jon

My jsp code
<%@page language="java"
     import="java.sql.*,java.io.*,mySAP.*,java.net.URL;"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Insert title here</title>
</head>
<body>
<%!StringBuffer stringbuffer = new StringBuffer();
     int testemp;%>
<%
     String dofrom;
     String doto;
     String s;
     String s1;
     dofrom = request.getParameter("DOFrom");
     doto = request.getParameter("DOTo");
     ResultSet resultset;
     String flag = request.getParameter("dall");
     mySAP.JcoTest2 obj = new mySAP.JcoTest2();
     //StringBuffer sb = obj.fetchData("one", "two");
     String sb = obj.checking();
     out.println(sb);
     try {
          StringBuffer stringbuffer = new StringBuffer();
          String separator = System.getProperty("file.separator");
          String path = System.getProperty("user.dir") + separator;
     } catch (Exception e) {
          out.println("error%%%%%%%%%" + e);
%>
</body>
</html>here i am calling JcoTest2 from mySAP pack...
first time it is showing correct output of JcoTest2 .if i change JcoTest2 and copy and run .jsp is outputing the old program value.
.I used to complie my program in local machine and copy the class file and jsp file into the server(linux).
Regards

SCCM 2012 client not reflecting name change

I have a computer that is running the SCCM client that was recently renamed because it was moving locations (the computer names reflect department and building). So I renamed the machine but it's still reflecting the old computer name in manager
console(it's been about 5 hours since the name change), do I need to remove the client and reinstall it to get it to update properly or should it be doing this automatically?

http://myitforum.com/cs2/blogs/rzander/archive/2008/08/11/sms-sccm-commandline.aspx
Use Trigger DataDiscoverRecord (DDR) update in the above post.
Jason | http://blog.configmgrftw.com

Images Not Reflecting Slider Changes Anymore

Similar Messages

Maybe you are looking for