Images not visible in LR4

LR4 only shows 15 images in a folder of 800 images. I processed these 15 images previously. When I go back into the folder, they are the only ones LR4 makes visible to me. Help!

When I first loaded the folder, I experienced no problems. I processed 15 images and stopped. The next day, when I tried to go in, problems started. The 15 processed images were visible, but the other 800-odd images were covered with a "film", looked grayish. They were not accessible. I could not click on them to process them. I have never had this particular problem happen. I tried reloading the "grayish" images - LR4 showed loading, then when the operation was complete, "No images in folder." I tried deleting the folder, then reloading it. It didn't change - only the 15 images loaded. I moved the 15 processed images into a separate folder, then loading the folder containing the remaining images - "No images in folder." Weird. I use Windows 7 on a Dell PC.

Similar Messages

LR4 to CS5 edited images saved to psd not visible in LR4.

Upgraded to LR4 and using CS5. If I edit an image in Photoshop then save it as a psd file to the origional location that the image was imported into LR4 the psd image-file does not show up in LR4. If I search for the file using finder (mac) I find the file where I expect it to be but LR4 does not see it. I used the same workflow in LR3 with no problems but, since ugrading to LR4 no psd images are showing up in the LR4 Library. Can anyone suggest a solution? Thanks!

When I first loaded the folder, I experienced no problems. I processed 15 images and stopped. The next day, when I tried to go in, problems started. The 15 processed images were visible, but the other 800-odd images were covered with a "film", looked grayish. They were not accessible. I could not click on them to process them. I have never had this particular problem happen. I tried reloading the "grayish" images - LR4 showed loading, then when the operation was complete, "No images in folder." I tried deleting the folder, then reloading it. It didn't change - only the 15 images loaded. I moved the 15 processed images into a separate folder, then loading the folder containing the remaining images - "No images in folder." Weird. I use Windows 7 on a Dell PC.

SP 2010 Publishing - Rollup and Page Images not visible when entering page edit mode

All:
Hello, I have an odd issue recently appearing after installation of FEB 2013 CU install. When users select to Edit a Publishing Page the Rollup Image and also Page Image(Article Page Layout) are not visible. Only the "Click here to insert Image from
SharePoint" link is visible.
The issue has be confirmed in 5 servers across two farms
DEV, QA, and PROD on client recently updated
DEV and PROD in a completely separate client farm
I have confirmed the issue does not exist in two separate farms running April 2012 CU. In both of those environments the image appears with issue even in Edit page mode.
In the farms where the issue exists you can click the insert image link and simply hit OK to see the image again. An easy enough work around for tech savvy but my client's content admins are very confused/frustrated by.
Is this a bug? I have confirmed in two separate farms including brand new web applications using out of the box publishing site templates.

Hi.
We have been facing the same issue in a 2013-environment (SP1), but in this case an upgraded 2010 Solution, which still runs in 2010-mode. Because of this, SharePoint still use resource-files in the 14-hive (as we have not performed an upgrade of Master
Pages etc.) The problem is also reproduced on a clean 2010 Site Collection in the same 2013-environment.
I have managed to find the cause of the problem (at least in our environment), and that is that as long as the selected picture/image has
not defined an "AltText"/"Alternate Text" the problem seems to occur.
In other words, try to define an Alternate Text and click OK in the "Edit Image Properties" Dialog.
I don't know if this may be the case for everyone else, but give it a try.
From this, I've further discovered (after hours of js-debugging) that there is a minor change (from 2010 to 2013) in a js-file called "SelectorControls.js" which is responsible for updating the various controls used in Page Layouts etc.
The problem exist in a method called ASO_UpdateButtonsAndPanels(), which checks whether the Image Control in question has content or not (Url). The local variable "hasContent" is then determined of an if statement, if(this.AssetData.ManageLinkDisplayText)
which in 2010 (14-hive) seems to be "true" regardless whether the Control is of type Image or Hyperlink. Further the code checks for AssetText (Alternate Text) which on an Image may be left empty.
In 2013 (15-hive) however, this if statement has been changed to, if(this.SelectorType==ConstLinkSelectorType), which clearly states "Image" or "Link" depending on the type of control.
I don't know if this is the cause of the problem in 2013, but in 2010 it seems to be exactly that.
Pending a solution from Microsoft, we have modified SelectorControls.js to overcome this issue until the customer decides to do a Visual Upgrade to 2013.
This is by all means not a supported nor a a permanent solution to the problem, as future Hotfixes, Service Pack etc. may "reset" our fix.
Below is a copy of the working solution:
function ASO_UpdateButtonsAndPanels()
{ULSuBa:;
var hasContent=!!this.AssetData.AssetUrl;
//SharePoint 2010: ManageLinkDisplayText is always "True"
//var hasContent=!!this.AssetData.AssetUrl;
//if(this.AssetData.ManageLinkDisplayText)
//hasContent=hasContent && !!this.AssetData.AssetText;
//SharePoint 2013
//var a=!!this.AssetData.AssetUrl;
//if(this.SelectorType==ConstLinkSelectorType) a = a && !!this.AssetData.AssetText;
//Fix for preventing existing selected image to disappear when saving page and/or editing a page with existing image.
if(this.SelectorType!=ConstImageSelectorType)
if(this.AssetData.ManageLinkDisplayText)
hasContent=hasContent && !!this.AssetData.AssetText;
if( hasContent )
if (this.ClearAssetButton !=null)
this.ClearAssetButton.EnableButton();
this.GetAssetSelectedPanel().style.display="inline";
this.GetEmptyPanel().style.display="none";
else
if (this.ClearAssetButton !=null)
this.ClearAssetButton.DisableButton();
this.GetAssetSelectedPanel().style.display="none";
this.GetEmptyPanel().style.display="inline";
I hope this helps anyone else struggling with the same problem.
Thanks!
Øyvind

Images Not Visible but Loading within Spry

I've built out a site using Spry numerous times and never had
any problems. But the below site I'm having issues with in that it
works fine in Safari but the images load within the Spry region set
(div id="mainContent") but are not visible. The images are
definately there as they can be viewed in a seperate window or
downloaded to the desktop.
w/w/w/./sl/im/press/./com (ignore / for domain name)
I've tried commenting out various elements in the css and
html and nothing seems to remedy this problem. Any help would be
super appreciated as I'm super stuck on this! The images don't load
in Firefox or Explorer. Thanks!

Hi bkerkay,
first try a rebuild of the library.
Try this:
Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
Close iPhoto
Duplicate the iPhoto Library folder
Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.
iPhoto 4 or later: Rebuilding the iPhoto Library
Get back with results.
Lori

Fill Image not visible with iOS (ipad/iphone)

Hi
I created a website with Adobe Muse and I have an issue when surfing with ipad or iphone.
When you have a coloured rectangle and add a fill image to it, it's perfectly visible with any type of browser on a desktop pc.
Yet, when using iOS7 the image is not shown, I only see the coloured rectangle.
This issue only concurs when I use parallax layers. The moment I add a movement to the image, it's not visible on ipad.
What I exactly do:
image fill: adapt to fill (in dutch: aanpassen aan vulling) and centered
movement: start movement up and right both on 0. after movement: up and right both on 0. This way I can create a parallax effect.
You can look at the example: http://balratmort.businesscatalyst.com
There are 4 image's not shown.
Strange thing: the first image with the brazilian flag has the same settings as the others, and the image is visible!
Could someone please help me in this?

I found the solution/error!
my main position in the movement tab was set to 0px.
So the movement starts when i'm at the top of the page.
when i reach the image it's already scrolled out of focus.
I need to set this to the pixel where my rectangle starts, not 0px.
and that's why the first image with the brazil flag, worked correctly!
I hope it's clear, since my muse is dutch, not english.

Images not visible in Web Dynpro

Hi All,
I am trying to show pictures from KM in a Web Dynpro for Java application but I have some issues with some pictures created and modified in Macintosh.
Pictures/images created in Adobe Photoshop CS2 Macintoch are not visible.
Any idea?
Regards,
Ridouan

Hi Armin,
The format is 240 by 340 px, the size is 85kb.
The browser is displaying the images correctly and I can't open the images with MS Paint.
I am using Windows viewer to view these images.
The URL is correct as I have other images (not created in Macintoch) and Web Dynpro is displaying these images just fine. The size is here 10KB.
If I place a link to the image then it will be displayed but not with the KM code.
wdContext.currentContextElement().setImage("/irj/go/km/docs/documents/Telefoongids/" + klaccount + ".jpg");
IPublicTelGidController.IDetailsElement details = wdContext.currentDetailsElement();
          String klaccount = wdContext.currentDetailsElement().getKlaccount();
          String foto_ok = wdContext.currentDetailsElement().getFoto_Ok();
          String manager = wdContext.currentDetailsElement().getManager();
          if (foto_ok.equals("X") && manager.equals("X")){
               IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
               IUser sapUser = wdClientUser.getSAPUser();
               com.sapportals.portal.security.usermanagement.IUser ep5User = WPUMFactory.getUserFactory().getEP5User(sapUser);
               //Getting the Resource...
               IResourceContext resourseContext = new ResourceContext(ep5User);
               IResourceFactory resourseFactory = ResourceFactory.getInstance();
               String path = "/documents/Telefoongids/" + klaccount + ".jpg";
               RID pathRIDimg = RID.getRID(path);
               com.sapportals.wcm.repository.IResource resourceimg =
               resourseFactory.getResource(pathRIDimg, resourseContext);
               //Reading the image file...
               BufferedInputStream bufIn =
               new BufferedInputStream(resourceimg.getContent().getInputStream());
               byte[] imagebyte = new byte[bufIn.available()];
               bufIn.read(imagebyte);
               //Mapping the image as a WebResourceu2026.
               //IWDWebResource webResource = WDWebResource.getWebResource(imagebyte,WDWebResourceType.GIF_IMAGE);
               IWDWebResource webResource = WDWebResource.getWebResource(imagebyte,WDWebResourceType.JPG_IMAGE);
               wdContext.currentContextElement().setImage(webResource.getURL());
            else{
                 wdContext.currentContextElement().setImage("");
            catch (Exception e)
            e.printStackTrace();

Images not visible in applet

Dear all
I have this applet for which i designed a toolbar.This toolbar has image icons that display some of the more used controlls. When i test it inside Eclipse i can see if perfectrly. But when i load it inside a browser i get some unexpected behaviour. The images for the image icons that are supposed to be in the tool bar are not visible. I checked the console output but it doesnt give me any permission errors. In the policy file that i placed in the same directory as the .html file i said to give all permisions.
Is there anything i am missing? (My images are in a diferent subdirectory then the ones where the class files are)
I know it is some sort of permission problem but dont know how to work it out. I tried by creating a signed applet too. But i think there must be something i am doing wrong.
Cheers
Dan

This is the code i am using to set the image for the button:
JToggleButton eraser = new JToggleButton( new ImageIcon("ToolbarIcons/eraser.JPG"));
eraser.setMargin(new Insets(0,0,0,0));
The result i get is the button with all the functionality but it is totaly grayed out without the image. So i am guessing the image does not get loaded.
And the second instance where i am getting the images is :
Toolkit tk = Toolkit.getDefaultToolkit();
Image img1 = tk.getImage("Cursors/rubbermouse.gif");
I am using the second case to load some images and cursors.
Cheers
Dan

Background Image not visible in a PDF report

Hi Experts!
I create a WORD 2007 template for BI Publisher 11g. I use a background image.
When I test the template locally as a PDF, the background image is visible, but when I open the Report with the BI Publisher, there is no image.
Has anyone an idea?
Regards Norbert

The size of the images was too big after compressing it. It worked fine.

Images not visible in epubs in Ibook

Hi.
I try to create an epub containin lots of images. All the images are of maximum size 500*500.
When trying to view the epub in ipad, a few of the images are not seen. Only their captions are visible.
But when I double tap the place where the images should be actually present, the images open fine in full screen.
At times, the imae just appears for one second and then vanishes.
Has anybody faced similar issues? All imaes I use are jpg files.
Any help in this regard will be greatly helpful.

By George, that did it! I had regenerated previews, but I missed the main issue.
Why would thumbnails disappear like that?
Thanks for your help.
Steve

Printer Profiles Not Visible in LR4 Mac

Hey guys, just checking to see if there is something I'm missing.
Short version: My printer profiles are not showing up in the "choose profile" dialog in LR4.
Long versioin: I'm trying to print an image from LR4 to my Xerox Phaser 8560 using a custom color profile I created with my ColorMunki. However the profile isn't showing up in the "choose profile" dialog box. There is also no apparent way to open a dialog box to search for the file. The profile is recently created. Works in Indesign CS4. It's located in the main Library/Colorsync/Profiles/ and my user (~/Library/Colorsync/Profiles/). It doesn't show up even when checking the "include display profiles" checkbox which is the only option available.
System: iMac 27" 3.4Ghz i7 16G Ram; Xerox Phaser 8560DN; LR 4.0
Am I missing something here?
Thanks,
Jason

WinterEC wrote:
Am I missing something here?
You likely made a CMYK profile for the printer and LR doesn't support CMYK profiles. You'll have to remake the profile to be an RGB profile. ColorMunki can do that although it'll default to CMYK unless you override that...

Images not visible, but info is there

Hello,
I seem to be having some issues in "seeing" my images.
I have about 7280 images in my library, however only the last two imported "rolls" are visible. All the other images are only represented by a gray wire frame, the image name and kewords still appear. Also, I checked to see if they are in the library folders and from there I am able to open them and view them in Preview and PS.
I have my entire library on an external hard drive, but had no problems until now. I quit out of iPhoto several times and have even turned off and reconnected the external hard drive several times also.
What is happening/reason for the "missing" images and what do I need to do to fix this issue?
BK

Hi bkerkay,
first try a rebuild of the library.
Try this:
Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
Close iPhoto
Duplicate the iPhoto Library folder
Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.
iPhoto 4 or later: Rebuilding the iPhoto Library
Get back with results.
Lori

Ps edited images not visible under keywords or in collections

Images I edit in PS no longer show up back in the catalog with the orignal under keyword or in a collection. I can find them when I go back to the orginal folder by the date the original was shot, but I don't work from the folders because that's not how my projects are organized, so they end up being pretty much invisible to me. when I locate them in the folders, the ps edited image has the same keywords as the original and is in the collection I was working on, but I can't view it when I choose that keywork or the collection. It shows there is a second image but won't allow you to see it, unless you go to folders. Is this something in a new version of lightroom, because my ps edited images have always been visible before, next to the orginal within a catalog or by a keyword. Is there something different you need to do for that to happen now?

By George, that did it! I had regenerated previews, but I missed the main issue.
Why would thumbnails disappear like that?
Thanks for your help.
Steve

Bootable ISO images not visible in PCD when doing Migration Task

We are looking to move from CUCM 8.6 to CUCM 10.0 using Prime Collaboration Deployment. We have the full 10.0 media for CUCM and IMP. We created an ISO image of each and uploaded them to the /fresh_install directory on the PCD server. When creating a migration task in PCD, when we get to the point to select an image and click Browse, nothing is there. We also tried downloading the bootable 10.5 media from PUT. After uploading that media, this was visible, but the 10.0 image we made from the original CD was not.
It appears PCD is doing some sort of validation check against the ISO. What can we do to ensure we create a valid image from the Disc so PCD can see it?

Hi, Jack.
I have the same question, could you provide more details? Thanks!
Say, in the log I found this: The given directory was located and searched but no valid options or upgrades were available. Note, the system cannot be downgraded so option and upgrade files for previous releases were ignored.
But this does not clarify the question.

Background Image Not Visible in Browser

I have searched the forum but I'm not finding a solution that
works.
I'm trying to put a background .png image in a header. It
shows up in Dreamweaver but not in preview mode. I have an external
style sheet that contains this:
.twoColFixRtHdr #header {
background-repeat: no-repeat;
height: 126px;
width: 770px;
padding: 0;
background-position: left top;
margin: 0px;
background-image: url(assets/pictures/banner_3.png);
My page contains the following:
<div id="header">
<h1 class="banner_title_top">Text</h1>
<h1><span class="banner_title_bottom">Text
</span>

</h1>
The ".twoColFixRtHdr" is coming from the fact that I'm using
a pre-made Dw CSS layout.
Any help is very appreciated.
Jason

Should have made no difference.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"j-hill" <[email protected]> wrote in
message
news:fb4cnk$fku$[email protected]..
> Out of desperation I tried to convert my image to a .jpg
and it seems to
> be working fine.
>
> Thanks,
> Jason

Waveform image not visible in region-suddenly.

Last night I was recording some guitar parts and although I could see the image of the waveform being drawn as the playhead moved, when I finished, the regions displayed only a single line as if nothing had been recorded. The audio plays back fine and the wave editor displays the image but not the regions in the arrange page. This makes comping and other tasks very hard indeed.
I have never had this happen in many years of using Logic and I cannot find any reason.
Tracks I recorded the day before in the same song are fine but out of the blue this has just started happening.
Is this a bug in 9.1.2?

If the image does not appear in print preview then there is some issue in its upload or display in script.
You should check these .
Also, if possible take the printout and check.
Hope this helps you.

Images not visible in LR4

Similar Messages

Maybe you are looking for