Images of a NI-PMA-1115?
Can anyone provide an image of a PMA-1115 showing a realistic complement of connectors and cables? I'd like to see what this unit really looks like in a deployed scenario. Looking through the manual and online, I only see pictures showing the unit without anything cabled up. What is the solution for connecting the USB from the display/keyboard to the PXI controller?
As an aside, I'm looking to make a "nice looking" mobile solution for vibe testing in a test cell environment. If anyone wants to share alternatives to the PMA-1115, I'd love to see them.
Chris
Hi C. Minnella-
The PMA-1115 does not require any fancy connectors or cables - it attaches directly to the side of a PXI chassis and comes with traditional VGA and DVI cables for the monitor and a right-angle-to-vertical USB cable for the touchpad and keyboard. The picture on the product page is what it looks like as attached to the side of the PXI chassis.
I hope this helps. Have a great day!
Gary P.
Applications Engineer
National Instruments
Visit ni.com/gettingstarted for step-by-step help in setting up your system.
Similar Messages
-
Good morning,
We have a customer with a 5508 controller running 7.4.110.0. It has a backup image of 7.2.111.3.
When we added a 1242 access point to it recently the access point was offered the wrong image version: it was offered and downloaded 7.2.111.3 instead of 7.4.110.0. Naturally it downloaded and installed this version and rebooted - and then found that it had the wrong image version for the running image, so downloaded a new image...7.2.111.3 again...
When we connected the AP to a sister WLC it was offered the correct 7.4.110.0 image, downloaded it and after a reboot we could connect it fine to the original WLC.
Has anyone seen anything like this before or can anyone suggest why this might be. I've attached the show boot from the WLC.
Thanks in advanceRobin,
Can you show the output of show ap image all
Also, can you try to join it again with debug lwapp events enable and show the output? -
Cisco 8941 IP phone background image
Dears,
I have cisco 8941 connected to CUCM 9.1, I tried to upload backgroung image unsuccesfully. where I already upload the background for cisco 7942 succesfully.
I already used (640x480x24) for cisco 8941.
Appreciate your support,
RegardsHi
Are you sure from the below:-
1-Full-size image
640 pixels (width) x 480 pixels (height)
Thumbnail image
123 pixels (width) x 111 pixels (height)
2- Did you restart TFTF servers , if you have pub and sub ) . Upload for both TFTP and restart both.
3-disable and reenable the Enable Caching of Constant and Bin Files at Startup TFTP service parameter (located in the Advanced Service Parameters).
4- Tell us the path on your TFTP management is /Desktops/640x480x24/
5- Share also the firmware of your IP phone 8941 , is it 9.3 ?.
Thank you
Please rate all useful information -
Dreamweaver CS4 help centering please
Hi everyone,
I'm trying to center my website using Dreamweaver. When I preview my site in Dreamweaver it looks good and centered. When I upload the site to Godaddy my site left justifies. Can anyone please help me. I'm a novice and I'm trying to create a page for a small business. Here is the coding for the site. I've tried several help tips online and nothing seems to work. Any help will be highly appreciated. Thanks for your time! Also, I think it has something to do with the CSS part. I'm also using a CSS style sheet.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Loan Modification Reviews For You | Get a Loan Modification Today!</title>
<link href="style.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
.header .header_center p {
font-size: 16px;
text-align: left;
.header .woman p {
color: #75B4EA;
font-weight: bold;
font-size: 36px;
font-family: helvitca;
.content p {
text-align: center;
color: #C1D3FB;
.content p {
color: #000;
.content p {
font-size: 12px;
text-align: left;
.a {
font-size: 24px;
.content a {
color: #545454;
a2 {
color: #545454;
.a3 {
color: #000;
font-size: 24px;
text-align: center;
p {
text-align: left;
font-size: 11px;
.content .a3 .a3 {
text-align: center;
.content .a3 .a3 {
text-align: center;
.a5 {
font-size: 36px;
.input br {
text-align: center;
.a15 {
text-align: center;
a:link {
color: #FF3;
a:visited {
color: #033;
body {
margin-left: auto;
margin-right: auto;
text-align:center;
#contents
margin-top: 10px;
margin-bottom: 10px;
margin-right:auto;
margin-left:auto;
width: 766px;
padding: 10px;
background-color: #FFF;
color: #000;
text-align: center;
body {
background-color:#fff;
width:766px;
text-align:center;
margin:0 auto;
position:relative;
font-size: 24px;
#contents
margin-top: 5px;
margin-bottom: 10px;
margin-right:0;
margin-left:0;
width: 766px;
padding: 10px;
background-color: #FFF;
color: #000;
text-align: center;
margin:0;
padding:0;
font-size:11px;
font-family:Tahoma,sans-serif;
color:#545454;
img {
border:0;
text-align: center;
a {
text-decoration:none;
a:hover {
text-decoration:underline;
text-align: left;
color: #D6D6D6;
.clearing {
clear:both;
height:0px;
width:0px;
font-size:0px;
.float_l {
float:left;
.header {
height:290px;
background:url('images/border_top.jpg') repeat-x;
.woman {
background:url('images/woman_top.gif') top right no-repeat;
width:766px;
height:119px;
color: #FFEA00;
font-size: 24px;
.woman img {
margin:45px 0 0 48px;
.header_center {
background:url('images/woman_center.jpg') no-repeat;
height:114px;
text-align: left;
.header_center p {
width:505px;
font-size:25px;
font-family:Helvetica;
color:#fff;
text-align:center;
padding-top:20px;
.header_center span {
font-family:Verdana;
font-weight:bold;
color:#215489;
vertical-align:top;
padding-left:55px;
.header_center a {
font-size:24px;
font-family:Helvetica;
font-weight:bold;
color:#ffea00;
vertical-align:top;
.navigation {
background:url('images/navigation.jpg') no-repeat;
height:57px;
.navigation_links {
color:#fff;
padding:15px 0 0 70px;
text-align: center;
.navigation_links img {
margin: 0 6px;
.content {
background:url('images/border.gif') repeat-y;
margin-top:15px;
border:1px solid #fff;
color: #4179B6;
font-size: 24px;
text-align: right;
.colum_left {
width:214px;
margin-left:20px;
html>body .colum_left {
margin-left:50px;
.news {
width:200px;
height:auto;
margin:0 0 15px 5px;
.news_title {
background-color:#f2f2f2;
color:#437fbe;
margin:5px 0;
padding:1px 0 0 10px;
.news h1 {
margin-left:10px;
.news p {
margin-bottom:5px;
margin-left:10px;
.news span {
background:url('images/link.gif') no-repeat;
background-position:right;
padding-right:25px;
margin-left:10px;
.news a {
color:#8f969c;
font-weight:bold;
font-size:10px;
.search {
width:190px;
background-color:#f2f2f2;
color:#4b4b4b;
padding:10px 0 0 10px;
margin:5px 0 0 5px;
.search span {
background:url('images/search.gif') no-repeat;
background-position:left;
padding-left:10px;
margin-left:10px;
.input {
margin:5px 0 15px 0;
.ok {
margin-top:6px;
vertical-align:top !important;
vertical-align:middle;
.colum_right {
width:400px;
margin-left:40px;
.top {
margin-bottom:17px;
.top img {
margin:0 10px 5px 0;
.top p {
margin-bottom:5px
.top span {
background:url('images/link.gif') no-repeat;
background-position:right;
padding-right:25px;
.top a {
color:#8f969c;
font-weight:bold;
font-size:10px;
.bottom img {
margin-bottom:5px;
.column {
width:200px;
.column img {
margin:0 10px 5px 0;
.column p {
margin-bottom:8px
.column span {
background:url('images/link_icon.gif') no-repeat;
background-position:left;
padding-left:10px;
.column a {
color:#87ad1f;
text-decoration:underline;
.column a:hover {
text-decoration:none;
.spacer {
clear:left;
height:1px;
.footer {
background:url('images/footer_background.gif') no-repeat;
height:63px;
margin-top:15px;
color:#fff;
text-align:right;
padding:20px 40px 0 0;
.footer a {
color:#fff;
.bbb {
text-align: center;
.header .header_center pppp {
text-align: left;
.a5 br {
font-size: 11px;
-->
</style>
</head>
<body>
<div id="container">
<div class = "header">
<div class = "woman">
<p> </p>
<p>LoanModificationReviews.com</p>
</div>
<div class = "header_center">
<p>GET THE TOOLS YOU NEED TO MODIFY YOUR MORTGAGE<br />
</p>
<p><a href = "#">Loan Modification Tool Reviews For You</a> </p>
</div>
<div class = "navigation">
<div class = "navigation_links"></div>
</div>
</div>
<p> </p>
<p> </p>
<h1 align="center" class="a5"> Loan Modifications are Easy </h1>
<h1 align="center" class="a5">Loan Modification Reviews For You</h1>
<p align="center"> </p>
<p><strong>Do not be fooled</strong> by any guru, system or web site that tells you that you can not do Loan Modiciationst . Making your home affordable requires agent hard work and the right tools you need to modify your mortgage.<br />
<br />
We've reviewed all of the popular Loan Modification Kits out there and we're going to tell you <strong>which are worth the money and which to avoid! </strong><br />
<br />
<strong>save you time, money </strong>and help you generate Loan Modifications and <strong>succeed</strong> at making your home more affordable</p>
<p> </p>
<table cellspacing="0" cellpadding="0">
<tr>
<td><a href="http://e2429jtwou38ok2j6aer5gkc22.hop.clickbank.net/"><img src="images/160minloanmodfixed.jpg" alt="" width="300" height="252" /></a></td>
<td><img src="images/spacer.gif" alt="" width="10" height="10" /></td>
<td valign="top"><table cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td><img src="images/t1.jpg" alt="" width="527" height="33" /></td>
</tr>
<tr>
<td background="images/t2.jpg"><table cellspacing="0" cellpadding="0" width="90%" border="0">
<tbody>
<tr>
<td><div>
<div class="a3"><img src="images/title_customer_rating.gif" alt="" width="111" height="13" /><img src="images/check.gif" alt="" width="18" height="17" hspace="5" /><img height="17" alt="" hspace="0" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /></div>
<p><strong> Company:</strong> 60-Minute Loan Modification</p>
<p><strong>Website:</strong><a href="http://e2429jtwou38ok2j6aer5gkc22.hop.clickbank.net/"> http://www.60-minuteloanmod.com</a><br />
<strong>Rank:</strong> #1<br />
<strong> Cost:</strong> $87.95<br />
<strong>Guarantee:</strong> 100% Money Back up to 60 Days<br />
<strong><img src="images/spacer.gif" alt="" width="1" height="1" />Description: </strong><br />
</p>
</div></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td><img src="images/t3.jpg" alt="" width="527" height="33" /></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td colspan="3"><img height="10" alt="" src="images/spacer.gif" width="10" /></td>
</tr>
</table>
<p> </p>
<table cellspacing="0" cellpadding="0">
<tr>
<td><img src="images/4thediymortgagemodkitfixed.jpg" alt="" width="300" height="252" /></td>
<td><img src="images/spacer.gif" alt="" width="10" height="10" /></td>
<td valign="top"><table cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td><img src="images/t1.jpg" alt="" width="527" height="33" /></td>
</tr>
<tr>
<td background="images/t2.jpg"><table cellspacing="0" cellpadding="0" width="92%" border="0">
<tbody>
<tr>
<td><div>
<div class="input"><img src="images/title_customer_rating.gif" alt="" width="111" height="13" /><img src="images/check.gif" alt="" width="18" height="17" hspace="5" /><img height="17" alt="" hspace="0" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /></div>
<p><strong> Company:</strong></p>
<p class="input"><strong>Website:</strong><br />
<strong>Rank:</strong> #2<br />
<strong>Cost:</strong><br />
<strong>Guarantee:</strong><br />
<strong>Description: </strong>sdafsdfsdf asdf sadfsd fasdf asdf asdf asdf asd fsdaf asdf asd fasd fasd fasd fas df asdf asdf asd fasd f asdf dasf asd fasd fa sdf asdf asd fsad fasd fa sdf asd fasd f asdf asd fasd fasd f asdf asd fasd f asdf asd fasd fasd f asdf asd fasd f asdf daf das fsda fda fas df asdf asdf asd fad sfads f asdf ads fasd fasd fdas f <br />
</p>
</div></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td><img src="images/t3.jpg" alt="" width="527" height="33" /></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td colspan="3"><img height="10" alt="" src="images/spacer.gif" width="10" /></td>
</tr>
</table>
<p> </p>
<table cellspacing="0" cellpadding="0">
<tr>
<td><img src="images/5loanmodguidebookfixed.jpg" alt="" width="300" height="252" /></td>
<td><img src="images/spacer.gif" alt="" width="10" height="10" /></td>
<td valign="top"><table cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td><img src="images/t1.jpg" alt="" width="527" height="33" /></td>
</tr>
<tr>
<td background="images/t2.jpg"><table cellspacing="0" cellpadding="0" width="90%" border="0">
<tbody>
<tr>
<td><div>
<div><img src="images/title_customer_rating.gif" alt="" width="111" height="13" /><img src="images/check.gif" alt="" width="18" height="17" hspace="5" /><img height="17" alt="" hspace="0" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /></div>
<p><strong> Company:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">1000+ Asset Management - ListingREO.com</a></p>
<p><strong>Website:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">www.ListingREO.com</a><br />
<strong>Rank:</strong> #1<br />
<strong>Cost:</strong> $99.00<br />
<strong>Guarantee:</strong> 60 Day Money Back<br />
<strong>Description: </strong>Absolutely, hands down, the best list of Banks, Lenders and Asset managers we have found! With over 1,000 contacts on this list, <strong>ANYONE</strong> can start listing REOs and processing BPOs! While most lists include main contact numbers and general websites, this list contains individual contact information for the key decision makers at each bank. This is the critical information you need to succeed as a BPO and REO agent! In addition, this list provides a monthly update to ensure your REO list is fresh and up to date.</p>
<br />
</div></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td><img src="images/t3.jpg" alt="" width="527" height="33" /></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td colspan="3"><img height="10" alt="" src="images/spacer.gif" width="10" /></td>
</tr>
</table>
<br />
<table cellspacing="0" cellpadding="0">
<tr>
<td><img src="images/2doityourselfloanmodfixed.jpg" alt="" width="300" height="252" /></td>
<td><img src="images/spacer.gif" alt="" width="10" height="10" /></td>
<td valign="top"><table cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td><img src="images/t1.jpg" alt="" width="527" height="33" /></td>
</tr>
<tr>
<td background="images/t2.jpg"><table cellspacing="0" cellpadding="0" width="90%" border="0">
<tbody>
<tr>
<td><div>
<div><img src="images/title_customer_rating.gif" alt="" width="111" height="13" /><img src="images/check.gif" alt="" width="18" height="17" hspace="5" /><img height="17" alt="" hspace="0" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /></div>
<p><strong> Company:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">1000+ Asset Management - ListingREO.com</a></p>
<p><strong>Website:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">www.ListingREO.com</a><br />
<strong>Rank:</strong> #1<br />
<strong>Cost:</strong> $99.00<br />
<strong>Guarantee:</strong> 60 Day Money Back<br />
<strong>Description: </strong>Absolutely, hands down, the best list of Banks, Lenders and Asset managers we have found! With over 1,000 contacts on this list, <strong>ANYONE</strong> can start listing REOs and processing BPOs! While most lists include main contact numbers and general websites, this list contains individual contact information for the key decision makers at each bank. This is the critical information you need to succeed as a BPO and REO agent! In addition, this list provides a monthly update to ensure your REO list is fresh and up to date.</p>
<br />
</div></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td><img src="images/t3.jpg" alt="" width="527" height="33" /></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td colspan="3"><img height="10" alt="" src="images/spacer.gif" width="10" /></td>
</tr>
</table>
<p><br />
</p>
<table cellspacing="0" cellpadding="0">
<tr>
<td><img src="images/3theloandmodkitfixed.jpg" alt="" width="300" height="252" /></td>
<td><img src="images/spacer.gif" alt="" width="10" height="10" /></td>
<td valign="top"><table cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td><img src="images/t1.jpg" alt="" width="527" height="33" /></td>
</tr>
<tr>
<td background="images/t2.jpg"><table cellspacing="0" cellpadding="0" width="90%" border="0">
<tbody>
<tr>
<td><div>
<div><img src="images/title_customer_rating.gif" alt="" width="111" height="13" /><img src="images/check.gif" alt="" width="18" height="17" hspace="5" /><img height="17" alt="" hspace="0" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /></div>
<p><strong> Company:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">1000+ Asset Management - ListingREO.com</a></p>
<p><strong>Website:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">www.ListingREO.com</a><br />
<strong>Rank:</strong> #1<br />
<strong>Cost:</strong> $99.00<br />
<strong>Guarantee:</strong> 60 Day Money Back<br />
<strong>Description: </strong>Absolutely, hands down, the best list of Banks, Lenders and Asset managers we have found! With over 1,000 contacts on this list, <strong>ANYONE</strong> can start listing REOs and processing BPOs! While most lists include main contact numbers and general websites, this list contains individual contact information for the key decision makers at each bank. This is the critical information you need to succeed as a BPO and REO agent! In addition, this list provides a monthly update to ensure your REO list is fresh and up to date.</p>
<br />
</div></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td><img src="images/t3.jpg" alt="" width="527" height="33" /></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td colspan="3"><img height="10" alt="" src="images/spacer.gif" width="10" /></td>
</tr>
</table>
<p> </p>
<p align="center"> </p>
<div class = "footer"> Copyright 2007 © LoanModificationsReviews. All rights reserved<br />
<a href = "#">Term of Use</a> / <a href = "#">Privacy Policy</a><br />
</div>
<p class="a3"> </p>
</div>
</body>
</html>
<script language='javascript' src='https://a12.alphagodaddy.com/hosting_ads/gd01.js'></script>Hi Nadia,
I followed your instructions but it is still left justifying the site. The site link is http://www.seanwooduf.com
I'll paste the html code again. Thank you for you fast response!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Loan Modification Reviews For You | Get a Loan Modification Today!</title>
<link href="style.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
.header .header_center p {
font-size: 16px;
text-align: left;
.header .woman p {
color: #75B4EA;
font-weight: bold;
font-size: 24px;
font-family: helvitca;
.content p {
text-align: center;
color: #C1D3FB;
.content p {
color: #000;
.content p {
font-size: 12px;
text-align: left;
.a {
font-size: 24px;
.content a {
color: #545454;
a2 {
color: #545454;
.a3 {
color: #000;
font-size: 24px;
text-align: center;
p {
text-align: left;
font-size: 11px;
.content .a3 .a3 {
text-align: center;
.content .a3 .a3 {
text-align: center;
.a5 {
font-size: 36px;
.input br {
text-align: center;
.a15 {
text-align: center;
a:link {
color: #FF3;
a:visited {
color: #033;
font-size: 18px;
body {
text-align:center;
background-color: white;
#contents
margin-top: 10px;
margin-bottom: 10px;
margin-right:auto;
margin-left:auto;
width: 766px;
padding: 10px;
background-color: #FFF;
color: #000;
text-align: center;
#container {
width: 766px;
margin: 0 auto;
-->
</style>
</head>
<body>
<div id="container">
<div class = "header">
<div class = "woman">
<p> </p>
<p>HomeLoanModificationReviews.com</p>
</div>
<div class = "header_center">
<p>GET THE TOOLS YOU NEED TO MODIFY YOUR MORTGAGE<br />
</p>
<p><a href = "#">Loan Modification Tool Reviews For You</a> </p>
</div>
<div class = "navigation">
<div class = "navigation_links"></div>
</div>
</div>
<p> </p>
<p> </p>
<h1 align="center" class="a5"> Loan Modifications are Easy </h1>
<h1 align="center" class="a5">Loan Modification Reviews For You</h1>
<p align="center"> </p>
<p><strong>Do not be fooled</strong> by any guru, system or web site that tells you that you can not do Loan Modiciationst . Making your home affordable requires agent hard work and the right tools you need to modify your mortgage.<br />
<br />
We've reviewed all of the popular Loan Modification Kits out there and we're going to tell you <strong>which are worth the money and which to avoid! </strong><br />
<br />
<strong>save you time, money </strong>and help you generate Loan Modifications and <strong>succeed</strong> at making your home more affordable</p>
<p> </p>
<table cellspacing="0" cellpadding="0">
<tr>
<td><a href="http://e2429jtwou38ok2j6aer5gkc22.hop.clickbank.net/"><img src="images/160minloanmodfixed.jpg" alt="" width="300" height="252" /></a></td>
<td><img src="images/spacer.gif" alt="" width="10" height="10" /></td>
<td valign="top"><table cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td><img src="images/t1.jpg" alt="" width="527" height="33" /></td>
</tr>
<tr>
<td background="images/t2.jpg"><table cellspacing="0" cellpadding="0" width="90%" border="0">
<tbody>
<tr>
<td><div>
<div class="a3"><img src="images/title_customer_rating.gif" alt="" width="111" height="13" /><img src="images/check.gif" alt="" width="18" height="17" hspace="5" /><img height="17" alt="" hspace="0" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /></div>
<p><strong> Company:</strong> 60-Minute Loan Modification</p>
<p><strong>Website:</strong><a href="http://e2429jtwou38ok2j6aer5gkc22.hop.clickbank.net/"> http://www.60-minuteloanmod.com</a><br />
<strong>Rank:</strong> #1<br />
<strong> Cost:</strong> $87.95<br />
<strong>Guarantee:</strong> 100% Money Back up to 60 Days<br />
<strong><img src="images/spacer.gif" alt="" width="1" height="1" />Description: </strong><br />
</p>
</div></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td><img src="images/t3.jpg" alt="" width="527" height="33" /></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td colspan="3"><img height="10" alt="" src="images/spacer.gif" width="10" /></td>
</tr>
</table>
<p> </p>
<table cellspacing="0" cellpadding="0">
<tr>
<td><img src="images/4thediymortgagemodkitfixed.jpg" alt="" width="300" height="252" /></td>
<td><img src="images/spacer.gif" alt="" width="10" height="10" /></td>
<td valign="top"><table cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td><img src="images/t1.jpg" alt="" width="527" height="33" /></td>
</tr>
<tr>
<td background="images/t2.jpg"><table cellspacing="0" cellpadding="0" width="92%" border="0">
<tbody>
<tr>
<td><div>
<div class="input"><img src="images/title_customer_rating.gif" alt="" width="111" height="13" /><img src="images/check.gif" alt="" width="18" height="17" hspace="5" /><img height="17" alt="" hspace="0" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /></div>
<p><strong> Company:</strong></p>
<p class="input"><strong>Website:</strong><br />
<strong>Rank:</strong> #2<br />
<strong>Cost:</strong><br />
<strong>Guarantee:</strong><br />
<strong>Description: </strong>sdafsdfsdf asdf sadfsd fasdf asdf asdf asdf asd fsdaf asdf asd fasd fasd fasd fas df asdf asdf asd fasd f asdf dasf asd fasd fa sdf asdf asd fsad fasd fa sdf asd fasd f asdf asd fasd fasd f asdf asd fasd f asdf asd fasd fasd f asdf asd fasd f asdf daf das fsda fda fas df asdf asdf asd fad sfads f asdf ads fasd fasd fdas f <br />
</p>
</div></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td><img src="images/t3.jpg" alt="" width="527" height="33" /></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td colspan="3"><img height="10" alt="" src="images/spacer.gif" width="10" /></td>
</tr>
</table>
<p> </p>
<table cellspacing="0" cellpadding="0">
<tr>
<td><img src="images/5loanmodguidebookfixed.jpg" alt="" width="300" height="252" /></td>
<td><img src="images/spacer.gif" alt="" width="10" height="10" /></td>
<td valign="top"><table cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td><img src="images/t1.jpg" alt="" width="527" height="33" /></td>
</tr>
<tr>
<td background="images/t2.jpg"><table cellspacing="0" cellpadding="0" width="90%" border="0">
<tbody>
<tr>
<td><div>
<div><img src="images/title_customer_rating.gif" alt="" width="111" height="13" /><img src="images/check.gif" alt="" width="18" height="17" hspace="5" /><img height="17" alt="" hspace="0" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /></div>
<p><strong> Company:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">1000+ Asset Management - ListingREO.com</a></p>
<p><strong>Website:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">www.ListingREO.com</a><br />
<strong>Rank:</strong> #1<br />
<strong>Cost:</strong> $99.00<br />
<strong>Guarantee:</strong> 60 Day Money Back<br />
<strong>Description: </strong>Absolutely, hands down, the best list of Banks, Lenders and Asset managers we have found! With over 1,000 contacts on this list, <strong>ANYONE</strong> can start listing REOs and processing BPOs! While most lists include main contact numbers and general websites, this list contains individual contact information for the key decision makers at each bank. This is the critical information you need to succeed as a BPO and REO agent! In addition, this list provides a monthly update to ensure your REO list is fresh and up to date.</p>
<br />
</div></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td><img src="images/t3.jpg" alt="" width="527" height="33" /></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td colspan="3"><img height="10" alt="" src="images/spacer.gif" width="10" /></td>
</tr>
</table>
<br />
<table cellspacing="0" cellpadding="0">
<tr>
<td><img src="images/2doityourselfloanmodfixed.jpg" alt="" width="300" height="252" /></td>
<td><img src="images/spacer.gif" alt="" width="10" height="10" /></td>
<td valign="top"><table cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td><img src="images/t1.jpg" alt="" width="527" height="33" /></td>
</tr>
<tr>
<td background="images/t2.jpg"><table cellspacing="0" cellpadding="0" width="90%" border="0">
<tbody>
<tr>
<td><div>
<div><img src="images/title_customer_rating.gif" alt="" width="111" height="13" /><img src="images/check.gif" alt="" width="18" height="17" hspace="5" /><img height="17" alt="" hspace="0" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /></div>
<p><strong> Company:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">1000+ Asset Management - ListingREO.com</a></p>
<p><strong>Website:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">www.ListingREO.com</a><br />
<strong>Rank:</strong> #1<br />
<strong>Cost:</strong> $99.00<br />
<strong>Guarantee:</strong> 60 Day Money Back<br />
<strong>Description: </strong>Absolutely, hands down, the best list of Banks, Lenders and Asset managers we have found! With over 1,000 contacts on this list, <strong>ANYONE</strong> can start listing REOs and processing BPOs! While most lists include main contact numbers and general websites, this list contains individual contact information for the key decision makers at each bank. This is the critical information you need to succeed as a BPO and REO agent! In addition, this list provides a monthly update to ensure your REO list is fresh and up to date.</p>
<br />
</div></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td><img src="images/t3.jpg" alt="" width="527" height="33" /></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td colspan="3"><img height="10" alt="" src="images/spacer.gif" width="10" /></td>
</tr>
</table>
<p><br />
</p>
<table cellspacing="0" cellpadding="0">
<tr>
<td><img src="images/3theloandmodkitfixed.jpg" alt="" width="300" height="252" /></td>
<td><img src="images/spacer.gif" alt="" width="10" height="10" /></td>
<td valign="top"><table cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td><img src="images/t1.jpg" alt="" width="527" height="33" /></td>
</tr>
<tr>
<td background="images/t2.jpg"><table cellspacing="0" cellpadding="0" width="90%" border="0">
<tbody>
<tr>
<td><div>
<div><img src="images/title_customer_rating.gif" alt="" width="111" height="13" /><img src="images/check.gif" alt="" width="18" height="17" hspace="5" /><img height="17" alt="" hspace="0" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /><img height="17" alt="" hspace="5" src="images/check.gif" width="18" /></div>
<p><strong> Company:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">1000+ Asset Management - ListingREO.com</a></p>
<p><strong>Website:</strong> <a href="http://1.reosecret.hop.clickbank.net/?tid=REO4AGENT" target="_blank">www.ListingREO.com</a><br />
<strong>Rank:</strong> #1<br />
<strong>Cost:</strong> $99.00<br />
<strong>Guarantee:</strong> 60 Day Money Back<br />
<strong>Description: </strong>Absolutely, hands down, the best list of Banks, Lenders and Asset managers we have found! With over 1,000 contacts on this list, <strong>ANYONE</strong> can start listing REOs and processing BPOs! While most lists include main contact numbers and general websites, this list contains individual contact information for the key decision makers at each bank. This is the critical information you need to succeed as a BPO and REO agent! In addition, this list provides a monthly update to ensure your REO list is fresh and up to date.</p>
<br />
</div></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td><img src="images/t3.jpg" alt="" width="527" height="33" /></td>
</tr>
</tbody>
</table></td>
</tr>
<tr>
<td colspan="3"><img height="10" alt="" src="images/spacer.gif" width="10" /></td>
</tr>
</table>
<p> </p>
<p align="center"> </p>
<div class = "footer"> Copyright 2009 © Home LoanModificationsReviews. All rights reserved<br />
<a href = "#">Term of Use</a> / <a href = "#">Privacy Policy</a><br />
</div>
<p class="a3"> </p>
</div>
</body>
</html>
<script language='javascript' src='https://a12.alphagodaddy.com/hosting_ads/gd01.js'></script> -
Nexus 7010 fabric extender timing out
Hello -
We have a Nexus 7010 and we are testing out using the fabric extenders for a need. We have a demo 2224 unit and have it connected to our M132XP-12 10G blade in the 7K but the FEX won't come online. I would have figured a possible software incompatability but looking at the supported list for that as well as hardware everything seems to be in order. This is what the status shows after it spends about 15 mins in the image download state.
FEX: 111 Description: FEX0111 state: Offline
FEX version: 4.2(1)N2(1a) [Switch version: 5.1(2)]
FEX Interim version: 4.2(1)N2(1a)
Switch Interim version: 5.1(2)
Module Sw Gen: 21 [Switch Sw Gen: 21]
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth2/20
Fabric interface state:
Po11 - Interface Up. State: Active
Eth2/20 - Interface Up. State: Active
Fex Port State Fabric Port Primary Fabric
This is looped in the log details until it times out:
04/25/2011 15:31:41.986978: Module register received
04/25/2011 15:31:41.987713: Registration response sent
04/25/2011 15:31:41.987889: Requesting satellite to download image
04/25/2011 15:32:00.105031: Module register received
04/25/2011 15:32:00.105779: Registration response sent
04/25/2011 15:32:00.105956: Requesting satellite to download image
04/25/2011 15:32:20.191181: Module register received
04/25/2011 15:32:20.191957: Registration response sent
04/25/2011 15:32:20.192144: Requesting satellite to download image
We ran a debug during this and these entries are displayed when looking for errors.
2011 Apr 25 15:30:31.443745 fex: Reg resp: Failed to get card info for swcardid 132
2011 Apr 25 15:30:35.472721 fex: Cardinfo: Unknown card id to get (132)
2011 Apr 25 15:30:35.472753 fex: Reg resp: Failed to get card info for swcardid 132
2011 Apr 25 15:30:41.495302 fex: Cardinfo: Unknown card id to get (132)
I'm still doing some more searching which so far hasn't turned up much, wanted to see if anyone has some other insight??
Thanks!Hi Jack -
Thanks for the response. Unfortunately, yes that is already complete. I was hoping that would be an easy fix. When we upgraded to 5.1(2) we did the 5.1 EPLD. I ran the install all impact command noted below for the 5.1 EPLD just to make sure it didn't report anything else as needing upgrade.
sho install all impact epld bootflash:n7000-s1-epld.5.1.1.img
Compatibility check:
Module Type Upgradable Impact Reason
1 LC Yes disruptive Module Upgradable
2 LC Yes disruptive Module Upgradable
5 SUP Yes disruptive Module Upgradable
1 Xbar Yes disruptive Module Upgradable
2 Xbar Yes disruptive Module Upgradable
3 Xbar Yes disruptive Module Upgradable
1 FAN Yes disruptive Module Upgradable
2 FAN Yes disruptive Module Upgradable
3 FAN Yes disruptive Module Upgradable
4 FAN Yes disruptive Module Upgradable
Copy complete, now saving to disk (please wait)...
Retrieving EPLD versions... Please wait.
Images will be upgraded according to following table:
Module Type EPLD Running-Version New-Version Upg-Required
1 LC Power Manager 4.008 4.008 No
1 LC IO 1.006 1.006 No
1 LC Forwarding Engine 1.006 1.006 No
1 LC SFP 1.004 1.004 No
2 LC Power Manager 4.008 4.008 No
2 LC IO 1.016 1.016 No
2 LC Forwarding Engine 1.006 1.006 No
2 LC FE Bridge(1) 186.006 186.006 No
2 LC FE Bridge(2) 186.006 186.006 No
2 LC Linksec Engine(1) 2.006 2.006 No
2 LC Linksec Engine(2) 2.006 2.006 No
2 LC Linksec Engine(3) 2.006 2.006 No
2 LC Linksec Engine(4) 2.006 2.006 No
2 LC Linksec Engine(5) 2.006 2.006 No
2 LC Linksec Engine(6) 2.006 2.006 No
2 LC Linksec Engine(7) 2.006 2.006 No
2 LC Linksec Engine(8) 2.006 2.006 No
5 SUP Power Manager 3.009 3.009 No
5 SUP IO 3.028 3.028 No
5 SUP Inband 1.008 1.008 No
5 SUP Local Bus CPLD 3.000 3.000 No
5 SUP CMP CPLD 6.000 6.000 No
1 Xbar Power Manager 2.010 2.010 No
2 Xbar Power Manager 2.010 2.010 No
3 Xbar Power Manager 2.010 2.010 No
1 FAN Fan Controller (1) 0.007 0.007 No
1 FAN Fan Controller (2) 0.007 0.007 No
2 FAN Fan Controller (1) 0.007 0.007 No
2 FAN Fan Controller (2) 0.007 0.007 No
3 FAN Fan Controller (1) 0.007 0.007 No
3 FAN Fan Controller (2) 0.007 0.007 No
4 FAN Fan Controller (1) 0.007 0.007 No
4 FAN Fan Controller (2) 0.007 0.007 No -
WLS managed server startup failure due to JMS Diagnostics Err BEA-320127
We have started to expereince problems starting a weblogic managed SOA server. The server fails to start with the following JMS related error:
<Error> <Diagnostics> <BEA-320127> <An error occurred while generating Image Source JMS as part of the diagnostic image zip file:
java.lang.ClassCastException: weblogic.jms.common.DurableSubscription incompatible with weblogic.jms.backend.BEConsumerCommon
at weblogic.jms.backend.BackEnd.dump(BackEnd.java:2880)
at weblogic.jms.JMSService.dump(JMSService.java:1169)
at weblogic.jms.common.JMSDiagnosticImageSource.createDiagnosticImage(JMSDiagnosticImageSource.java:43)
at weblogic.diagnostics.image.ImageSourceWork.run(ImageSourceWork.java:111)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
Truncated. see log file for complete stacktrace
Can anyone help me resolve this issue?
Thanks.
AdrianApparently, this issue was found internally and there is no patch for it yet. Please contact Oracle support and request a patch.
-
Unable to connect to Essbase via EAS after server re-ip
Hi all,
One of our environments have had the servers moved to new IP addresses. The DB server was completed changed so I had to reconfigure the environment, using the same databases, and redeployed all the components. Everything worked apart from EAS. It would not launch from the URL nor would it work if the console was installed on a server or PC. I logged an SR and it was suggested to update java which I did but it made no difference. A remote session yielded nothing. I decided to uninstall EAS and reinstall it dropping the tables in the DB and having them recreated as we use calc man for Planning. The EAS console now launches but I can't connect to Essbase. It just hangs and complains of an invalid log in. I tried the native admin account but that made no difference. Here is an extract of the logs
easserver.log
[2013-11-06T15:29:02.482+00:00] [EssbaseAdminServices0] [ERROR] [ESSEAS-35505] [oracle.epm.essbase.eas] [tid: 19] [userId: <anonymous>] [ecid: 0000K8i1zGFAtH_5HRL6if1IUYLA00001b,0] [APP: EAS#11.1.2.0] Following Exception occurred for user admin. Message exception is EPMCSS-00301: Failed to authenticate user. Invalid credentials. Enter valid credentials.
EssbaseAdminServices
####<Nov 6, 2013 10:50:44 AM GMT> <Error> <Diagnostics> <THE SERVER NAME> <EssbaseAdminServices0> <[ACTIVE] ExecuteThread: '55' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1383735044140> <BEA-320127> <An error occurred while generating Image Source configuration as part of the diagnostic image zip file:
weblogic.diagnostics.image.ImageSourceCreationException: java.lang.NullPointerException
at weblogic.management.provider.internal.ConfigImageSource.createDiagnosticImage(ConfigImageSource.java:105)
at weblogic.diagnostics.image.ImageSourceWork.run(ImageSourceWork.java:111)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: java.lang.NullPointerException
at weblogic.management.provider.internal.EditAccessImpl.getEditor(EditAccessImpl.java:597)
at weblogic.management.provider.internal.ConfigImageSource.writeEditLockState(ConfigImageSource.java:296)
at weblogic.management.provider.internal.ConfigImageSource.createDiagnosticImage(ConfigImageSource.java:88)
at weblogic.diagnostics.image.ImageSourceWork.run(ImageSourceWork.java:111)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>
EAS is installed on the same server as Planning, APS, RA etc. essbase is on a separate box as are the sql databases so in all 3 servers for this environment.
Essbase is definitely started as I can connect to it using EAS from another environment and retrieve database from the apps in excel.
Thanks in advance,
NathanIf you are able to connect to Essbase using EAS from another Server or PC. and in that Server only if you not able to connect to Essbase using EAS
it is Java issue only. (Ensure ESSBASE.EXE process is there in Essbase Server)
Which version of Hyyperion you are using??
Uninstall Java and install again.
Thanks,
Mady -
My build.xml must have problems, because the jar size is way smaller than the JBuilder equivalent. I think it is not including the 3rd party Jars that I want it to include.
Additionally, it builds, but when I execute it I get strange errors indicating it can't find certain system classfiles.
Here is the build file:
<project name="JAutoTest" default="dist" basedir=".">
<!-- set global properties for this build -->
<property name="src" value="src"/>
<property name="build" value="build"/>
<property name="test" value="jAutoTool"/>
<property name="dist" value="dist"/>
<property name="doc" value="doc"/>
<property name="Name" value="JAutoTest"/>
<property name="packages" value="jAutoTool.*"/>
<path id="project.class.path">
<pathelement location="lib/"/>
<pathelement location="jAutoTool/"/>
<pathelement path="${java.class.path}/"/>
</path>
<target name="check_for_optional_packages">
<available property="java.reflection" classname="java.lang.reflect"/>
</target>
<target name="prepare">
<!-- Create the time stamp -->
<tstamp/>
<!-- Create the build directory structure used by compile -->
<mkdir dir="${build}"/>
<mkdir dir="${test}"/>
<mkdir dir="${doc}"/>
</target>
<target name="compile" depends="prepare,check_for_optional_packages">
<!-- Compile the java code from ${src} into ${build} -->
<javac srcdir="${src}" destdir="${build}" debug="on" deprecation="off" optimize="on">
<classpath refid="project.class.path"/>
</javac>
</target>
<target name="genDoc" depends="compile">
<javadoc packagenames="${packages}" sourcepath="${basedir}/${src}" destdir="${doc}" author="true" version="true" windowtitle="${Name} API" doctitle="${Name}" bottom="Copyright � 2001 Motorola, Inc. All Rights Reserved."/>
</target>
<target name="dist" depends="compile">
<!-- Create the ${dist}/lib directory -->
<mkdir dir="${dist}/lib"/>
<!-- Put everything in ${build} into the JAutoTest-${DSTAMP}.jar file -->
<jar jarfile="${dist}/lib/JAutoTest-${DSTAMP}.jar" basedir="${build}"
manifest="${dist}/META-INF/MANIFEST.MF">
<zipgroupfileset dir="lib" includes="*.jar"/>
</jar>
</target>
<target name="clean">
<!-- Delete the ${build} and ${dist} directory trees -->
<delete dir="${build}"/>
<delete dir="${dist}"/>
</target>
</project>
I have the other jars at /lib.
The error I am getting is:
D:\testjTool\dist\lib>java -jar *.jar
Uncaught error fetching image:
java.lang.NullPointerException
at sun.awt.image.URLImageSource.getConnection(URLImageSource.java:102)
at sun.awt.image.URLImageSource.getDecoder(URLImageSource.java:111)
at sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.j
ava:251)
at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:217)
at sun.awt.image.ImageFetcher.run(ImageFetcher.java:185)
Thanks.The error I am getting is:
D:\testjTool\dist\lib>java -jar *.jar
Uncaught error fetching image:
java.lang.NullPointerException
at sun.awt.image.URLImageSource.getConnection(URLImageSource.java:102)
at sun.awt.image.URLImageSource.getDecoder(URLImageSource.java:111)
at sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.j
ava:251)
at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:217)
at sun.awt.image.ImageFetcher.run(ImageFetcher.java:185)
Classpath is:
D:\testjTool>set CLASSPATH=\testjTool\build;c:\JBuilder4\lib\HTTPClient.jar;c:\J
Builder4\lib\htmlparser.jar;c:\JBuilder4\lib\classes12;c:\JBuilder4\lib\classes12\javax.jar;c:\JBuilder4\lib\dbswing.jar;c:\JBuilder4\lib\jbcl.jar;.;
The ant build works, but the executable is 1/2 the size of the
JBuilder one. -
Hyperion Planning is Crashing Frequently
Hi Experts,
We have the Hyperion Planning 11.1.2.1 in Windows 2008 64 bit env. The Planning services are crashing very frequently. We have the JVM Heap Size and 512 MB and 1024 MB. We also looked at the Physical Memory usage and it looks fine.
Following is the error in Planning logs.
Not sure what is causing the crash. Do I need to change any settings / JVM Heap size?
####<Nov 7, 2012 2:28:54 PM PST> <Error> <Kernel> <ALVAPPHPN001> <Planning0> <[STANDBY] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352327334155> <BEA-000802> <ExecuteRequest failed
java.lang.OutOfMemoryError.
java.lang.OutOfMemoryError
>
####<Nov 7, 2012 2:28:54 PM PST> <Alert> <Diagnostics> <ALVAPPHPN001> <Planning0> <oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl - Incident Dump Executor (created: Wed Nov 07 14:28:54 PST 2012)> <<WLS Kernel>> <> <> <1352327334946> <BEA-320016> <Creating diagnostic image in e:\oracle\middleware\user_projects\domains\test\servers\planning0\adr\diag\ofm\test\planning0\incident\incdir_1267 with a lockout minute period of 1.>
####<Nov 7, 2012 2:28:58 PM PST> <Warning> <JMX> <ALVAPPHPN001> <Planning0> <oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl - Incident Dump Executor (created: Wed Nov 07 14:28:54 PST 2012)> <<WLS Kernel>> <> <> <1352327338839> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
####<Nov 7, 2012 2:28:58 PM PST> <Warning> <JMX> <ALVAPPHPN001> <Planning0> <oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl - Incident Dump Executor (created: Wed Nov 07 14:28:54 PST 2012)> <<WLS Kernel>> <> <> <1352327338864> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
####<Nov 7, 2012 2:28:59 PM PST> <Warning> <JMX> <ALVAPPHPN001> <Planning0> <oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl - Incident Dump Executor (created: Wed Nov 07 14:28:54 PST 2012)> <<WLS Kernel>> <> <> <1352327339402> <BEA-149515> <An error was encountered getting the attribute DatabaseProductName on the MBean com.bea:ServerRuntime=Planning0,Name=EPMSystemRegistry,Type=JDBCDataSourceRuntime during a call to getAttributes>
####<Nov 7, 2012 2:28:59 PM PST> <Warning> <JMX> <ALVAPPHPN001> <Planning0> <oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl - Incident Dump Executor (created: Wed Nov 07 14:28:54 PST 2012)> <<WLS Kernel>> <> <> <1352327339403> <BEA-149515> <An error was encountered getting the attribute DriverVersion on the MBean com.bea:ServerRuntime=Planning0,Name=EPMSystemRegistry,Type=JDBCDataSourceRuntime during a call to getAttributes>
####<Nov 7, 2012 2:28:59 PM PST> <Warning> <JMX> <ALVAPPHPN001> <Planning0> <oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl - Incident Dump Executor (created: Wed Nov 07 14:28:54 PST 2012)> <<WLS Kernel>> <> <> <1352327339410> <BEA-149515> <An error was encountered getting the attribute DriverName on the MBean com.bea:ServerRuntime=Planning0,Name=EPMSystemRegistry,Type=JDBCDataSourceRuntime during a call to getAttributes>
####<Nov 7, 2012 2:28:59 PM PST> <Warning> <JMX> <ALVAPPHPN001> <Planning0> <oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl - Incident Dump Executor (created: Wed Nov 07 14:28:54 PST 2012)> <<WLS Kernel>> <> <> <1352327339410> <BEA-149515> <An error was encountered getting the attribute DatabaseProductVersion on the MBean com.bea:ServerRuntime=Planning0,Name=EPMSystemRegistry,Type=JDBCDataSourceRuntime during a call to getAttributes>
####<Nov 7, 2012 2:29:14 PM PST> <Error> <Diagnostics> <ALVAPPHPN001> <Planning0> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352327354149> <BEA-320127> <An error occurred while generating Image Source configuration as part of the diagnostic image zip file:
weblogic.diagnostics.image.ImageSourceCreationException: java.lang.NullPointerException
at weblogic.management.provider.internal.ConfigImageSource.createDiagnosticImage(ConfigImageSource.java:105)
at weblogic.diagnostics.image.ImageSourceWork.run(ImageSourceWork.java:111)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: java.lang.NullPointerException
at weblogic.management.provider.internal.EditAccessImpl.getEditor(EditAccessImpl.java:597)
at weblogic.management.provider.internal.ConfigImageSource.writeEditLockState(ConfigImageSource.java:296)
at weblogic.management.provider.internal.ConfigImageSource.createDiagnosticImage(ConfigImageSource.java:88)
at weblogic.diagnostics.image.ImageSourceWork.run(ImageSourceWork.java:111)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Thanks
Kannan.Hi Kanan,
I have seen a similar issue(but in web analysis) which was caused as a result a large number of threads are created and an OutOfMemory exception is thrown.
This was reported as unpublished BUG 12887340 - WEB ANALYSIS SERVICES DOESN'T RELEASE BACK MEMORY
Doc which talks about this:
Web Analysis Services Doesn't Release Back Memory (Doc ID 1356811.1)
I guess you are still on base 11.1.2.1, many performance realted issues are fixed in the patches released, you may want to move to the latest one.
Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.600 (14464109)
Here is the link to read me:
https://updates.oracle.com/Orion/Services/download?type=readme&aru=15424421
Cheers..!!
Rahul S. -
Mouse over to show a small flv preview clip
Hi,
I am hoping you can help.
I simply would like to be able to roll over an image and on mouse over, a small 10 sec FLV preview clip appears and loops until I mouse out.
I see it everywhere but I cannot seem to replicate it.
RegardsMacnimation wrote:
Hi,
I found what I was looking for but cannot seem to replicate it:
http://www.videocopilot.net
At the bottom are four images for tutorials that when you roll over them they display a short video clip
The code:
<a href="tutorials/blast_wave/index.html"><img border="0" src='../img.videocopilot.net/assets/public/images/vc_cool/tutorialpic s/popular/111.jpg' onmouseover="showtrail('assets/public/flash/tutorialvids/111.flv', 'video','Blast Wave',266,150,0,'hqmedia','• Build a realistic explosion using…<br />• Create a powerful shockwave and…<br />');" onmouseout="hidetrail();" /></a>
But I cannot replicate it when replacing with my own images and footage.
Regards
showtrail and hidetrail are javascript functions that you did not insert into your replicated page. -
i'm using JBuilder5 and have finished coding. Now, how to pack everything up into one file and diliver it to my custom?
i want to clear up the code so I created a new application with JBuilder5 then copied all my source code(*.java) and (*.gif, *.jpg) to the new application source directory. After that, i added those files (.java .gif .jpg) to the project. Rebuild the project, fine, but when i press the run button I got these error messages:
Uncaught error fetching image:
java.lang.NullPointerException
at sun.awt.image.URLImageSource.getConnection(URLImageSource.java:102)
at sun.awt.image.URLImageSource.getDecoder(URLImageSource.java:111)
at sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:251)
at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:217)
at sun.awt.image.ImageFetcher.run(ImageFetcher.java:185) -
Web App - different input type when submitting
I have a Web App image field on a customer submitted Web App field.
It is originally inserted as
<input type="field" name="CAT_Custom_22222" ... />
But I'm using it as
<input type="text" name="CAT_Custom_22222" ... />
and from another dropdown field input, a jQuery snippet would grab the value and insert into it
so then it would look like this
<input type="text" name="CAT_Custom_22222" ... value="/image/image-set/A/C/E/111.jpg" />
The dropdown has set of pre-defined URL of images so when users change, it will print the image on the page as well as update the IMAGE field to be submitted.
It was set up that way due to another "non-web-person-client-case"
There are random "users" submitting the web form and they are meant to upload certain file from limited selection anyway so I set up the dropdown.
If an administrator needs to change the image, he can log into backend and upload image and of course he's not capable of finding correct URL path and type it in
(that's why it couldn't be a text field in the first place)
Long story short, this has been working beautifully for last couple of years then suddenly stopped working. I guess there must have been a change where BC wouldn't accept type="text" for a field meant to be type="file". It's bit disappointing as BC database would still save it in string format anyway.
Any suggestion to this ?Hi,
Please see the links and check they are helpful:
http://blogs.office.com/2013/08/01/introducing-a-new-user-experience-feature-in-access-web-apps-cascading-controls/
http://msdn.microsoft.com/en-us/library/office/jj249372(v=office.15).aspx
Then, the issue is more related to Access web app DEV, I recommend you post the question to MSDN forum for Access:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=accessdev&filter=alltypes%2Calllanguages&sort=lastpostdesc
Thanks for your understanding.
Regards,
George Zhao
TechNet Community Support -
Apple work group manger not connecting AD domain anymore error 14006
Great little pod cast.
EXCLUSIVE INTERVIEW WITH THE WALL OF SOUNDINVENTORNever before heard stories of the GratefulDead's Wall of Sound from its inventor, Bob Heil. Heil used all the knowledgehe gained from Paul W. Klipsch to create the modern architecture for live rockaudio as we know it today. LEARN MOREhttp://www.klipsch.com/blog/wpwk-podcast-ep-5-bob-heil-pwk-grateful-dead/?utm_source=Shopatron+Email...Working with a clien trying to upgrade a Cisco ME 3400 FS24-A from Base to Access. They spent some $700 or more on the upgrade license, but when we try to load the new firmware, we get this:TextLoading me340x-metroaccess-tar.122-35.SE3.tar from 172.17.2.4 (via Vlan2): !!!!!!!!!!!!!!!!!!!!!examining image...extracting info (111 bytes)extracting me340x-metroaccess-mz.122-35.SE3/info (382 bytes)extracting info (111 bytes)System Type: 0x00000000 Ios Image File Size: 0x00514200 Total Image File Size: 0x00514200 Minimum Dram required: 0x08000000 Image Suffix: metroaccess-122-35.SE3 Image Directory: me340x-metroaccess-mz.122-35.SE3 Image Name: me340x-metroaccess-mz.122-35.SE3.bin Image Feature: LAYER_2|MIN_DRAM_MEG=128Error: The image in the archive which would be used to upgradeError: system number 1 does not support that particular system.
... -
Not able to download image from database
not able to download image from database am in jdeveloper 11g release 2 am using this example
: http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-2/
hi am not able to down load my image my jsp xml is
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document title="sms4200.jspx" id="d1">
<af:messages id="m1"/>
<af:form id="f1" usesUpload="true">
<af:panelStretchLayout topHeight="211px" id="psl1" inlineStyle="width:1338px; background-color:Navy;">
<f:facet name="top">
<af:panelHeader text="Sms Intergration Sources" id="ph1">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend"/>
<f:facet name="info"/>
<af:panelStretchLayout id="psl2" inlineStyle="height:178px; width:1018px;" topHeight="22px"
endWidth="589px" startWidth="55px" bottomHeight="33px">
<f:facet name="end">
<af:panelHeader text="Office" id="ph2"
inlineStyle="width:900px; background-color:Navy;">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend"/>
<f:facet name="info"/>
<af:panelFormLayout id="pfl3" inlineStyle="background-color:Navy;" rows="1">
<f:facet name="footer"/>
<af:inputText label="#{bindings.Name1.hints.label}"
required="#{bindings.Name1.hints.mandatory}"
columns="20"
maximumLength="#{bindings.Name1.hints.precision}"
shortDesc="#{bindings.Name1.hints.tooltip}" id="it2">
<f:validator binding="#{bindings.Name1.validator}"/>
</af:inputText>
<af:inputText
label="#{bindings.LocalUpDirectory1.hints.label}"
required="#{bindings.LocalUpDirectory1.hints.mandatory}"
columns="20"
maximumLength="#{bindings.LocalUpDirectory1.hints.precision}"
shortDesc="#{bindings.LocalUpDirectory1.hints.tooltip}"
id="it3">
<f:validator binding="#{bindings.LocalUpDirectory1.validator}"/>
</af:inputText>
</af:panelFormLayout>
</af:panelHeader>
</f:facet>
<f:facet name="top">
<af:inputText value="#{bindings.IntegrationTypeName1.inputValue}"
label="#{bindings.IntegrationTypeName1.hints.label}"
required="#{bindings.IntegrationTypeName1.hints.mandatory}"
columns="#{bindings.IntegrationTypeName1.hints.displayWidth}"
maximumLength="#{bindings.IntegrationTypeName1.hints.precision}"
shortDesc="#{bindings.IntegrationTypeName1.hints.tooltip}" id="it1">
<f:validator binding="#{bindings.IntegrationTypeName1.validator}"/>
</af:inputText>
</f:facet>
</af:panelStretchLayout>
</af:panelHeader>
</f:facet>
<f:facet name="center">
<!-- id="af_one_column_header_stretched" -->
<af:decorativeBox theme="dark" id="db1" inlineStyle="width:1050px; background-color:Navy;">
<f:facet name="center">
<af:panelGroupLayout layout="scroll" id="pgl3" inlineStyle="background-color:Navy;">
<af:panelStretchLayout id="psl3" inlineStyle="width:1012px; height:502px;"
topHeight="133px" startWidth="0px">
<f:facet name="center">
<af:panelStretchLayout id="psl5" endWidth="659px" startWidth="171px">
<f:facet name="center"/>
<f:facet name="start"/>
<f:facet name="end">
<af:panelGroupLayout layout="scroll" id="pgl2">
<af:inputFile label="Select Image" id="if1" autoSubmit="true"
valueChangeListener="#{ImageBean.uploadFileValueChangeEvent}"/>
<af:commandButton actionListener="#{bindings.CreateInsert.execute}"
text="Restart Load Image Process"
disabled="#{!bindings.CreateInsert.enabled}"
id="cb2"/>
<af:commandButton actionListener="#{bindings.Commit.execute}"
text="Save"
disabled="#{!bindings.Commit.enabled}"
id="cb3"/>
<af:commandButton text="View" id="cb1"
partialSubmit="true"
unsecure="#{ImageBean.downloadButton}"
action="#{image.downloadImage}"
binding="#{image2.downloadButton}"/>
</af:panelGroupLayout>
</f:facet>
<f:facet name="top"/>
</af:panelStretchLayout>
</f:facet>
<f:facet name="start"/>
<f:facet name="top">
<af:panelStretchLayout id="psl4" startWidth="232px" endWidth="296px"
bottomHeight="18px" topHeight="11px">
<f:facet name="bottom"/>
<f:facet name="center"/>
<f:facet name="start">
<af:panelFormLayout id="pfl1" labelAlignment="top">
<f:facet name="footer"/>
<af:inputText label="File from PC to be Transfered" id="it4"/>
</af:panelFormLayout>
</f:facet>
<f:facet name="end">
<af:panelFormLayout id="pfl2" labelAlignment="top" maxColumns="10">
<f:facet name="footer">
<af:inputText value="#{bindings.DocumentName.inputValue}"
label="File Transfered to Database"
required="#{bindings.DocumentName.hints.mandatory}"
columns="50"
rows="1"
maximumLength="#{bindings.DocumentName.hints.precision}"
shortDesc="#{bindings.DocumentName.hints.tooltip}"
id="it5" simple="false">
<f:validator binding="#{bindings.DocumentName.validator}"/>
</af:inputText>
</f:facet>
</af:panelFormLayout>
</f:facet>
<f:facet name="top"/>
</af:panelStretchLayout>
</f:facet>
</af:panelStretchLayout>
</af:panelGroupLayout>
</f:facet>
</af:decorativeBox>
</f:facet>
</af:panelStretchLayout>
</af:form>
</af:document>
</f:view>
</jsp:root>
and my log file is
<ViewHandlerImpl> <_checkTimestamp> Apache Trinidad is running with time-stamp checking enabled. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
<UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
the method am calling is
public BlobDomain downloadImage() {
FacesContext facesContext = null;
OutputStream outputStream = null;
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
// get an ADF attributevalue from the ADF page definitions
AttributeBinding attr = (AttributeBinding)bindings.getControlBinding("Documentimage");
if (attr == null) {
return null;
// the value is a BlobDomain data type
BlobDomain blob = (BlobDomain)attr.getInputValue();
try { // copy hte data from the BlobDomain to the output stream
IOUtils.copy(blob.getInputStream(), outputStream);
// cloase the blob to release the recources
blob.closeInputStream();
// flush the outout stream
outputStream.flush();
} catch (IOException e) {
// handle errors
e.printStackTrace();
FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, e.getMessage(), "");
FacesContext.getCurrentInstance().addMessage(null, msg);
return blob;
}i get this error when clicking the button
error when not able to download image
<BeanHandler> <getStructure> Failed to build StructureDefinition for : sms4200.ImageBean
<UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
Edited by: Tshifhiwa on 2012/06/03 10:53 AM
Edited by: Tshifhiwa on 2012/06/03 10:56 AM
Edited by: Tshifhiwa on 2012/06/03 10:57 AMhi i try to run your sample am geting this error
Error 500--Internal Server Error
oracle.jbo.DMLException: JBO-27200: JNDI failure. Unable to lookup Data Source at context jdbc/HRDS
at oracle.jbo.server.DBTransactionImpl.lookupDataSource(DBTransactionImpl.java:1453)
at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:329)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.connect(DefaultConnectionStrategy.java:203)
at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolConnect(ApplicationPoolMessageHandler.java:600)
at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:417)
at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:8972)
at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4606)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2536)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2346)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3245)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:571)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:234)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:504)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:499)
at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:517)
at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:867)
at oracle.adf.model.binding.DCDataControl.setErrorHandler(DCDataControl.java:487)
at oracle.jbo.uicli.binding.JUApplication.setErrorHandler(JUApplication.java:261)
at oracle.adf.model.BindingContext.put(BindingContext.java:1318)
at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:247)
at oracle.adf.model.BindingContext.instantiateDataControl(BindingContext.java:1020)
at oracle.adf.model.dcframe.DataControlFrameImpl.doFindDataControl(DataControlFrameImpl.java:1645)
at oracle.adf.model.dcframe.DataControlFrameImpl.internalFindDataControl(DataControlFrameImpl.java:1514)
at oracle.adf.model.dcframe.DataControlFrameImpl.findDataControl(DataControlFrameImpl.java:1474)
at oracle.adf.model.BindingContext.internalFindDataControl(BindingContext.java:1150)
at oracle.adf.model.BindingContext.get(BindingContext.java:1103)
at oracle.adf.model.binding.DCParameter.evaluateValue(DCParameter.java:82)
at oracle.adf.model.binding.DCParameter.getValue(DCParameter.java:111)
at oracle.adf.model.binding.DCBindingContainer.getChildByName(DCBindingContainer.java:2748)
at oracle.adf.model.binding.DCBindingContainer.internalGet(DCBindingContainer.java:2796)
at oracle.adf.model.binding.DCExecutableBinding.get(DCExecutableBinding.java:115)
at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:329)
at oracle.adf.model.binding.DCBindingContainer.evaluateParameterWithElCheck(DCBindingContainer.java:1478)
at oracle.adf.model.binding.DCBindingContainer.findDataControl(DCBindingContainer.java:1608)
at oracle.adf.model.binding.DCIteratorBinding.initDataControl(DCIteratorBinding.java:2542)
at oracle.adf.model.binding.DCIteratorBinding.getDataControl(DCIteratorBinding.java:2477)
at oracle.adf.model.binding.DCIteratorBinding.getAttributeDefs(DCIteratorBinding.java:3319)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.fetchAttrDefs(JUCtrlValueBinding.java:514)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDefs(JUCtrlValueBinding.java:465)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:541)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:531)
at oracle.jbo.uicli.binding.JUCtrlValueBinding$1JUAttributeDefHintsMap.(JUCtrlValueBinding.java:4104)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeHintsMap(JUCtrlValueBinding.java:4211)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.getHints(JUCtrlValueBinding.java:2564)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.internalGet(JUCtrlValueBinding.java:2389)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlAttrsBinding.internalGet(FacesCtrlAttrsBinding.java:275)
at oracle.adf.model.binding.DCControlBinding.get(DCControlBinding.java:749)
at javax.el.MapELResolver.getValue(MapELResolver.java:164)
at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
at com.sun.el.parser.AstValue.getValue(Unknown Source)
at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
at com.sun.faces.facelets.el.TagValueExpression.getValue(TagValueExpression.java:109)
at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)
at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.getLabel(LabelLayoutRenderer.java:929)
at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.encodeAll(LabelLayoutRenderer.java:213)
at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.encodeAll(LabeledInputRenderer.java:215)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeFormItem(PanelFormLayoutRenderer.java:1088)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.access$100(PanelFormLayoutRenderer.java:50)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$FormColumnEncoder.processComponent(PanelFormLayoutRenderer.java:1604)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$FormColumnEncoder.processComponent(PanelFormLayoutRenderer.java:1523)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:187)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:318)
at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:283)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeChildren(PanelFormLayoutRenderer.java:420)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.encodeAll(PanelFormLayoutRenderer.java:208)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:447)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$1500(PanelGroupLayoutRenderer.java:30)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:734)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:637)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:187)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:318)
at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:283)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:360)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:879)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:1294)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeMiddlePanes(PanelStretchLayoutRenderer.java:351)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:316)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at oracle.adf.view.rich.render.RichRenderer.encodeStretchedChild(RichRenderer.java:2194)
at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer.access$400(RegionRenderer.java:50)
at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer$ChildEncoderCallback.processComponent(RegionRenderer.java:707)
at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer$ChildEncoderCallback.processComponent(RegionRenderer.java:692)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:187)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:318)
at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:283)
at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer._encodeChildren(RegionRenderer.java:297)
at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer.encodeAll(RegionRenderer.java:186)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at oracle.adf.view.rich.component.fragment.UIXRegion.encodeEnd(UIXRegion.java:323)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:879)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:1294)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeMiddlePanes(PanelStretchLayoutRenderer.java:351)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:316)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:274)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1277)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1655)
at oracle.adfinternal.view.faces.component.AdfViewRoot.encodeAll(AdfViewRoot.java:91)
at com.sun.faces.application.view.FaceletViewHandlingStrategy.renderView(FaceletViewHandlingStrategy.java:399)
at org.apache.myfaces.trinidadinternal.application.ViewDeclarationLanguageFactoryImpl$ChangeApplyingVDLWrapper.renderView(ViewDeclarationLanguageFactoryImpl.java:350)
at com.sun.faces.application.view.MultiViewHandler.renderView(MultiViewHandler.java:131)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:273)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:165)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:1027)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:334)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:232)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:313)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:122)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: javax.naming.NameNotFoundException: While trying to lookup 'jdbc.HRDS' didn't find subcontext 'jdbc'. Resolved ''; remaining name 'jdbc/HRDS'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:411)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at oracle.jbo.server.DBTransactionImpl.lookupDataSource(DBTransactionImpl.java:1439)
... 190 more
my connection.xml is
<?xml version = '1.0' encoding = 'UTF-8'?>
<References xmlns="http://xmlns.oracle.com/adf/jndi">
<Reference name="HRDS" className="oracle.jdeveloper.db.adapter.DatabaseProvider" credentialStoreKey="HRDS" xmlns="">
<Factory className="oracle.jdeveloper.db.adapter.DatabaseProviderFactory"/>
<RefAddresses>
<StringRefAddr addrType="sid">
<Contents>smsdev</Contents>
</StringRefAddr>
<StringRefAddr addrType="subtype">
<Contents>oraJDBC</Contents>
</StringRefAddr>
<StringRefAddr addrType="port">
<Contents>1521</Contents>
</StringRefAddr>
<StringRefAddr addrType="hostname">
<Contents>localhost</Contents>
</StringRefAddr>
<StringRefAddr addrType="user">
<Contents>hr</Contents>
</StringRefAddr>
<SecureRefAddr addrType="password"/>
<StringRefAddr addrType="oraDriverType">
<Contents>thin</Contents>
</StringRefAddr>
</RefAddresses>
</Reference>
</References>
Edited by: Tshifhiwa on 2012/06/04 2:20 PM -
Not able to view images in gallery, when they are ...
Hi,
The file explorer was showing two default images folder and I was unable to delete one of them as I was unable to view images via gallery. Then i installed X-plore and deleted one of the images folder. Now, when I click images and select memory card as storage space, I cannot view them via gallery and view them only via X-plore. Please suggest how can I correct this issue.Maybe I am stupid but if you delete the imagefolder, it will be gone. You can set your default imagefolder: goto Media-> Camera-> Settings-> Use Memory-> Card. You can also backup your card to PC, reformat the card in your phone, because it makes default maps for images, video, audio,.........and then copy your images back to the specific folder.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009
Maybe you are looking for
-
Data persistence with JDeveloper extensions
I have an extension which adds an extra tab at the bottom of the file next to "Source." I have added a design view which shows the GUI representation of the data. I was wondering what are some of the ways I can persist my data when the GUI or file is
-
I developed a 1 page Xmas comic using 'comic life' and photos dragged from iPhoto. I exported it to PDF so it was easier to email to people. The size of the PDF is 12 Mb. However when I tried to compress it using the inbuilt leopard features, the zip
-
Transfer product category from catalog to SRM with 2 BE systems
Hello experts, We are having an issue when transfering products from the SRM-MDM Catalog though OCI, since we have an SRM extended classic scenario connected to 2 backend systems. When the information is downloaded to SRM, the product category is cha
-
Are there any docs on setting up BPM in the sense of XI? (Scenario: R/3 > RFC Adapter > XI3.0 > JDBC Adapter > SQL database or the flow in revesre direction) Thanks, Bhaskar
-
Cannot view oracle form on the browser... pls help...!
hi guys.. am new to oracle forms.. ma prob is that i've created 4 oracle forms using oracle 9i and i can perfectly run and view 3 forms. but when i compile and run the other form it does not display on the browser window. it displays just the java ap