Images offline after update??

Initially I had the error message about not being able to connect to the library after the update so I repaired the library ctr+opt then click repair. The images are back but are all showing as offline - is there a quick way to relocate them all??
Thanks

If your images are stored by by reference and they loose their connection to the master, select all the files and right click on them then select "Locate Referenced" files, this will allow you to point to them.
Tony

Similar Messages

  • Image moves after updating

    I have a document containing some scanned linked images in indesign. However when I see some errors in in them, I crop them in Photoshop. When these images get updated, they either increase in  their size ( if I have autofit enabled), or  change their position if I have autofit disabled. Is there a way so that the image stays in place after I crop them in Photoshop? I’m using indesign cs6

    Pixel dimensions is the size, in pixels, of the image. Resolution is how large you wish to print those pixels by specifying how may will fill a defined space, ie. 300 pixels in the space of an inch. Resolution has nothing to do with number of pixels that the image contains. When you crop the image in Photoshop you are cutting off pixels and throwing them away -- changing the pixel dimensions for the image.
    > By cropping I guess you’re saying to adjust the blue outer lines when autofit option is unchecked right? That merely hides the undesirable portion of image rather than actually cropping.
    That's what I mean (except that I also mean you can move the image around inside the frame rather than adjusting the frame itself). There is no functional difference in your output if you crop in ID, and there are plenty of advantages, like the ability to reposition or show more of the image, and the size of the image doesn't change if you edit.

  • Help! All referenced Aperture images offline after Time Machine restore!

    Okay, I finally decided to upgrade the internal drive of my 15" MBP from the 250 stocker to a 640 WD drive. I did a Time Machine backup right before swapping the drives, then restored from backup. Everything seems to have transferred fine, except for Aperture. All the photo's metadata is still there, all my various projects and everything are fine, but the actual photos are nowhere to be found. They were all referenced from my iPhoto library. When I go File>locate referenced files, Macintosh HD is offline (which i'm guessing is my old HD). Thing is, under the Not Found column, it says 0..... Can someone please help me with this??

    So I just had the same problem. I had restored my whole disk drive from a backup after Apple replaced the hard drive.
    All images that were referenced on the internal drive were listed as offline even after a Aperture DB rebuild and a disk drive identically named to the original.
    Procedure: first test this on a few files, then you can do the whole library.
    Select any project with multiple pictures that are referenced and have a red tag indicating offline. Do a select all on the images in that project, even if some do not have offline indicated. After the selection use File -> Locate Referenced Files.
    Uncheck the box that says "Show Only Referenced Files" Select one of the files that you know has a status of offline. Next, in the bottom window, navigate to that exact file and select it. Click the Reconnect All button, it may take a few minutes, but when it is done the number of offline files will have decreased and the new number of online files will be reflected.
    The Reconnect All feature is smart enough to figure out the folder hierarchy for your whole library. I subsequently used the HUD to select all 14,300 "offline" images in the library, I then selected one and told it to Reconnect All as above. Took about 15 minutes but at least there was a progress bar.
    Good Luck

  • Desktop image changes after update or startup

    Any one know why after a shut down and restart or after a system update half of my destop images change back to the default starview.. I have 8 separate desktops and the same ones always get knocke back to the default image.  Then I go through the same process of customizing the desktop image and it sticks as long as I don't do a complete shutdown or updatge the system.  And lately there's been a few updates. 
    Any insight would be helpful.  While not a critical issue it's an annoying one for sure...
    thanks
    Rndg

    Hi Mende.  Tried deleting the .plist in the library and after a few shutdowns got the same prblem happening again...Guess my Mac doesn't like my desktop pics...any other ideas?
    Thanks
    RD

  • Aperture "no image found" after updating to 3.1.3.

    This has been posted elsewhere with 60 some views with no responses and on here with almost 50 views with no responses. I will try rewording my question:
    I have Aperture 3.1.3 (updated recently). I opened it and have a library displayed in the browser.
    The library resides on an external drive along with 5 or 6 other ones (arranged by year).
    I can look at my photos but can't edit or work with them because of the "no image found" message.
    I am having no luck in reconnecting masters and also can't see the other libraries in the list of Aperture Libraries. I copied the 2011 library to my hard disk, but still can't reconnect masters.
    Help please.

    I believe there are other threads which discuss this issue:
    https://discussions.apple.com/thread/3192306?tstart=0

  • Failure mounting or repairing images (DMGs) after updating to 10.4.9

    I used Disk Utility to create a compressed image of both my and a friend's "The Frozen Throne" (Warcraft 3 expansion, by Blizzard) cd. Although both CDs mount properly when inserted into my drive, the images created from them by Disk Utility (both before 10.4.9 and with 10.4.9) fail with:
    | Verify and Repair disk “The Frozen Throne.dmg”
    | Checking HFS volume.
    | Checking Extents Overflow file.
    | Checking Catalog file.
    | Invalid extent entry
    | Incorrect block count for file
    | Checking Catalog hierarchy.
    | Checking volume bitmap.
    | Volume Bit Map needs minor repair
    | Checking volume information.
    | The volume The Frozen Throne needs to be repaired.
    |
    | Error: The underlying task reported failure on exit
    |
    |
    | 1 HFS volume checked
    | 1 volume could not be repaired because of an error
    | 1 HFS volume checked
    | 1 volume could not be repaired because of an error
    Which is not altogether surprising since checking the actual cd yields:
    + Verifying volume “The Frozen Throne”
    + Checking HFS volume.
    + Checking Extents Overflow file.
    + Checking Catalog file.
    + Invalid extent entry
    + Incorrect block count for file
    + Checking Catalog hierarchy.
    + Checking volume bitmap.
    + Volume Bit Map needs minor repair
    + Checking volume information.
    + The volume The Frozen Throne needs to be repaired.
    +
    + Error: The underlying task reported failure on exit
    +
    +
    + 1 HFS volume checked
    + Volume needs repair
    I'm sure this has something to do with intentional fudging of the filesystem metadata by Blizzard for copy protection purposes. Regardless, I would like the system to be happy with the image. How do I repair it or create an image without fs errors?
    Thanks,
    Christian
    PowerBook G4   Mac OS X (10.4.9)  

    Something went Horribly Wrong for a fair number of people who have USB drives and updated to 10.4.9--the drives just won't show up. For a few the Combo update worked, for others it looks like nothing is going to work except a fix from Apple, and we'll just have to wait for that.
    Do you have an Airport base station? Several people have gotten their USB drives to work by plugging them into the base station. If you don't, and can't wait for a fix to appear, then you will have to do an archive and install, then update only as far as 10.4.8.
    Francine
    Francine
    Schwieder

  • Find My iphone offline after update

    I updated my find my iphone App yesterday and now i can no longer find my ifphone.  It says its offline.  Even when i log in on my pc to the icloud i can't find a location.  Any idea whats gone wrong here when it was working perfectly fine??

    Okay I am such an idiot - the find my iPhone app update wasn't the issue it was the iOS 5.1 update.   I was connected to the net via my wifi but under settings- general -network - cellular data network I had no APN details under cellular data - put this back in and I'm away laughing. Yeah!!

  • Unsupported Image Format after update

    I support a fair number of Macs, and if someone tells me that one day the computer did something and then the next day would not and they didn't change a thing I would know they were wrong. Something changed but they don't know what changed.
    I use Aperture 1.5.2. I installed the RAW updae for PPC. Great. Aperture opened the NEF files.
    Next day it would not opwn NEF files, showing 'unsupported file format'. I swear So I reinstalled and the installer said it wasn't necessary.
    I don't know where to even begin looking to resolve this. Any ideas?
    Michael
    too many to mention, really   Mac OS X (10.4.8)  

    I'd try and split the problem in half.
    Will Preview.app open the NEF file in question? It uses the same RAW image support (as delivered in the update you applied) as Aperture.
    If it won't, then there's something about the RAW update for PPC that has got broken/modified/disturbed.
    If it will, then it's Aperture that is being awkward (is it the same NEF file? It has been said that sometimes an image needs to be reimported if support for it wasn't present at the time when it was previously added to Aperture's library.)
    just a couple of ideas.

  • Mail accounts are offline after update

    Hi, I just updated to osx 10.6.4
    The new mail 4.3 causes problems now. I have 7 mail accounts set up and since I updated I always have two accounts that seems to be offline. When I hit the stamp it sometimes changes the accounts that are offline.
    No account is really offline, so that is a bug. Apple hotline can't help. I tried every setting, I created accounts again. Nothing works.
    Does anyone have the same problem?
    thx

    Hi.
    that would be too easy. I already spent about 3 hours solving that problem, got in touch with apple support twice, but no solution yet.
    It seems like I can only handle 4 accounts with the same server. I don't know.
    best

  • After updating to Windows 8.1 the Webcam in my Inspiron is gone and Imaging devices missing in Device Manager

    my webcam in my Dell Inspiron 3521 was working fine with Windows 8.  After updating to Windows 8.1 the Webcam in my computer is gone and the 'Imaging devices' is  missing in the Device Manager.  how can I get the Webcam back? 
    thank you very much.

    I don't see anything specific to your webcam issue but there are a number of Windows 8.1 related drivers listed on the Support site.
    http://www.dell.com/support/home/us/en/04/product-support/product/inspiron-15-3521/drivers
    The Dell Update utility will recommend drivers that are needed specific to your model.
    http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=860YD&fileId=3374847033&osCode=WB64A&productCode=inspiron-15-3521&languageCode=EN&categoryId=AP
    Good luck!
    bill
    Regards, Bill Moore @BMooreAtDell

  • Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

    I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install.  The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years.  Lots of pictures in the 55 gb are not showing for some reason. 

    No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
    Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
    LN

  • Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error

    After updating to Acrobat Standard and Readre 9.5.2, some (but not all) of my pdf files are now opening with the error "Insufficient data for an image." The files open, but they are fuzzy, pixelated and are missing the bates stamp I applied earlier (using a utility from LexisNexis Casemap). I can open the files fine on another computer with Acrobat Standard 9.5.1.
    How can I uninstall the 9.5.2, or get it to work again?

    Windows 7 64-bit with Samsung SSD on an i5 Lenovo laptop. Yes, I have both Acrobat Standard and Reader 9.5.2 on the machine. Both give the same error when opening the attached file.
    -Dan-
    [email protected]
    Date: Thu, 16 Aug 2012 23:06:52 -0600
    From: [email protected]
    To: [email protected]
    Subject: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
        Re: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
        created by vamalik in Acrobat Installation & Update Issues - View the full discussion
    Hi osieko,Can you share across any such sample pdf file? Also, what OS are you working upon?You have both Acrobat Standard 9.5.2 and Reader 9.5.2 installed on your machine. Right? One option that you can try is to repair your Acrobat/Reader from Programs in Control Panel and see if that resolves the issue.Otherwise kindly attach a screenshot of the error you are receiving along with any sample pdf file.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4627764#4627764
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4627764#4627764. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what's up with that?

    I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?

    You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
    Restart phone
    Reset phone
    Restore in iTunes using a backup
    Restore in iTunes as new, without using a backup
    If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

  • Before image and after image is not updating correctly with 2LIS_04_P_ARBPL

    Hello BW gurus
    I am facing problem with the posting date extraction from the extractor 2lis_04_p_arbpl. I am getting incorrect before image and after image. Please let me know how to solve this problem.
    Thanks and regards
    kiran.

    Hi,
    It is difficult to check this in the Source System and there is no direct method. I can give you a workaround which we did analysed for some of delta datasources.
    Steps to be followed sequentiall once the step is successful:
    1. Create a Production order or something.. Note down the number.
    2. Check the datasource whether you get the same Production Order as delta
    3. Now do whatever confirmation etc . for the same Production Order
    4. Check the datasource (RSA3) and see wat it extracts.. might be multiple records..
          In that case just see the sequence of records.. and the changes each record has brought in.. hope this way we can simulate the delta datasource realtime..
    And if you find the sequence or somthin is correct and in BW is not updating properly then it is our fault to dig and find out further.. If the issues is at the RSA3 itself, then u can raise an OSS Message as a Bug.
    Hope it helps.
    Regards,
    Chathia.

  • Immediately after updating Acrobat Pro XI to the latest version, the software no longer displays imags in pdf docs.

    Immediately after updating Acrobat Pro XI to the latest version, the software no longer displays images in pdf docs.  All the boxes where images are supposed to be are solid grey.  Old documents that worked are no longer displayed correctly and new documents I make do not display images.  All grey boxes.  Worked fine before the update.  Suggestions?

    Hi precious_star,
    Could you please let me know what version of OS are you using.
    Open Acrobat and go to "Edit > Preferences > Page Display" and check whether 'Show large images' option is checked.
    Is this issue specific for one PDF?
    If possible, please share the file with me via email so that I can also check at my end.
    I have sent you a message with my contact id details.
    Hope to get your response.
    Regards,
    Anubha

Maybe you are looking for