Images on card... not seeing

We were Alltel when we were switched to AT&T. We switched. We removed our microchips from our old phones. I can play my music from it, but we cannot see the older images or contacts. I can take a photo and it supposedly is saving to my chip.  Any ideas?

Some phones have a different way of formatting data on the SD card, and it can be very idiosyncratic.  I know I had a feature phone at one point that would only show me images if they were in an "images" folder.  Usually, the correct folders/structure is set up when you put the card in the phone and format it, but it may not have prompted you to format because you have data already on the card.
I would reccomend backing up all the data on the card, and then reinserting it in the phone and formatting it.  Once it's formatted, put it back in your computer and transfer the files to their logical location (usually the folders are named reasonably, it just varies from device to device).  Worst case scenario is you'll have to e-mail some or all of the data to your phone and save it from the text messages so it's automatically put in the right place.

Similar Messages

  • USB 2 Card not seeing iPod Video

    so i bought an usb 2 pci card from techgear. the card works fine with things other than my 30 gb ipod vidoe and 60 gb photo. it can see them and they lock up in the do not disconnect screen. it works fine with my 20 gb 3rd gen.
    i have tried to use a powered hub. no luck. i guess i was wondering if anyone has any ideas at all about how to get this to work.
    thanks

    LiMa,
    This is where it is nice to have two drives or a partitioned drive. You can have a clean installation of software on one drive and change settings or update software on another. If the camera stops working, you may have updated to a version of Quicktime that dropped support for the camera. You then reboot to the original hard drive and go back to what works. I believe the install disk took you back in time and that is why some of your quicktime features were lost.
    Jim

  • Print pdf image (business card) not at center of page

    I want to be able to move an image of a business card on a 8
    x 11 sheet .pdf similar to an Illustrator .ai file.

    Thank you for your post. These forums are specific to the
    Acrobat.com website and its set of hosted services, and do not
    cover the Acrobat family of desktop products. Please visit the
    following forums for any questions related to the Acrobat family of
    desktop products:
    http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

  • Airport card not seeing networks after IP address clash

    Hi - I have a wireless network that works fine, just reset it up again and my two mac laptops connect perfectly well to it, as they always did. The reason I set it up again was that my desktop intel mac pro (my main computer) was giving an error message, that another device on my network had the same IP address as my Airport card, and that it therefore couldn't connect to my wireless network (which has been set up so that the various devices are given their own IP addresses automatically in Bridge Mode). I have never seen this before. I repeatedly tried 'renew DHCP lease' in system preferences - it had no effect so I set up the network again from scratch to see if that would help. Still nothing. The mac pro cannot see either of the two Airport Extremes in my network using airport utility and nor will it connect to the new network when I put in the name and password - again, I have tried repeatedly. The Airport icon in system preferences is orange.
    The airport card has never reported any problems and Apple hardware test (as well as the programme that came with Applecare) indicates that it's working normally. There are also no hardware problems with the Mac Pro according to the same tests.
    Does anyone on this forum know what I can do to connect the Mac Pro to the wireless network? (I don't have the option of trying to use it as the computer that sets up the network, as it's located a long way from the telephone connection, so that is done using Airport Utility via one of the laptops).

    Deleting the keychain with Keychain access worked.
    I still can't click on options nor see preferred networks, but now the new keychain I made is finally staying around after reboot and auto connecting me to my home network.
    Thank you for the help. I did accidentally delete ALL my keychains, but that's just as well as I probably had other clutter in there as well.

  • Airport Card : Not seeing Airport intermittently

    Using 10.4.11, my Powermac G4 sometimes does not recognize Airport-on status bar- usually after a restart . It has to be enabled by clicking Netgear. Works impeccable then.
    Anything to do, with login items like Mail ? Or Temperature Monitor ? Or the ISP who have upgraded recently the Internet speed ?
    Rather frustrating operation. Does not happen on the other Panther Drive. PC Laptop works flawlessly remotely.
    I have reset PRAM, PMU and changed the battery without success.
    Not paid much attention to Airport software updates. Any other suggestions ?
    Thanks for responding

    Perhaps it is just a minor issue like a loose cable from the card to the antenna, so no signal reaches the card overall.
    However checking requires opening the computer, so you may do so only if you feel yourself capable doing so. You may check out the guides at http://www.ifixit.com for your computer model.

  • Original Airport card not seeing Linksys WRT54GX

    Switched out my BEFW11S4 for a WRT54GX, on the old router I just changed my preamble to long and the iBook saw it, nothing I do seems to change it so my iBook can see this router.
    It can see two of the neighbors routers and my old one (when I plug it back in) in the airport list, the new router has both B and G enabled, I've tried messing with the basic rates and preamble.

    actually, it works intermittently, sometimes it sees it, sometimes not, the router must be toggling some settings or something, if anyone know optimal network density, beacon, etc. settings can you link it here.
    thanks.

  • IPhoto and Image Capture does not see the iPhone as a camera

    Whether I launch iPhoto or Image Capture, in both cases the iPhone is not recognized as a camera. I am running firmware 1.1.1. I am afraid up upgrade to 1.1.3 because I do not want to lose my pictures. This was working at one point, but now it is not. I have no problems syncing music and video content within iTunes. I recently used migration assistant to move my home folder to my new Mac Pro running leopard. I am not sure if this is when it stopped working. I also tried using the Tiger machine at work, but the same thing happens there as well in both apps. Is there anything anyone can suggest?

    This helped me. It is advice I found from a user named Carlosmara. First make sure iPhoto is closed and your iPhone is not connected. Then, as Carlosmara stated in his post,
    "Go to your Library/preferences and delete the file com.apple.iPhoto.plist
    IPhoto should recognized the iPhone again."
    The file in question is under your user folder.
    I then restarted my mac and plugged in the iPhone so that it would sync. After the sync, when I opened iPhoto, my iPhone was recognized and I could download the photos perfectly.
    Hopefully this will help you as it helped me

  • HP Digital Imaging Monitor not seeing Photosmart C6280 on network.

    I have put my Photosmart C6280 All-in-One printer on my wired network, and the HP Digital Imaging Monitor does not see the printer any longer.  Why?

    Hello! Could you please provide more information regarding the issue, such as which operating system you are using? Any additional information will be helpful in resolving your issue. Thanks!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • Lightroom CC Import sees CF Card in reader but does not see any images, cannot import anything

    I have installed Lightroom CC.  It seems to work but if I connect a card reader with a CF card, while Lightroom sees the card, it sees no images.  I have to copy the files to a hard disk and import from there.  How do I fix this annoying problem?

    Hi drchevalier,
    You mean, you are able to import those files, if moved to hard drive but not able to view them when importing directly from the CF Card? Please attach a screenshot.
    If so, might be an issue with the card. Did you try reformatting the card in the camera itself and check? If not, might want to try that.
    Also, make sure your camera is in the Camera Raw plug-in | Supported cameras list. Else, you might not see it in Lr.
    ~ Arpit
    EDIT: Sorry, did not see your reply. Glad to hear that the issue got resolved.

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

    When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

    Randy Ruttger
    Thanks for the follow up.
    Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
    The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
    You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
    On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
    So the remedy to the problem that you presented in this thread could have been...
    1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
    2. Move to another version of Premiere Elements (which you did)
    I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
    Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
    Best wishes,
    ATR

  • Aperture not seeing images in camera

    I have two copies of Aperture: one on my MBPro and one on a recently acquired iMac 2.4GHz.
    Aperture on the iMac does not see the images on the camera, although recognises that the camera has been attached. The images are visible in iPhoto.
    On the MBP, Aperture sees the images on the memory card of my Nikon D70 and imports without problem.
    Any ideas why (or what I have missed) this might be happening. The two copies of Aperture are not running at the same time.

    I actually do have one but I wanted to try without. When I later tried with the card reader (that was after having the version on the MBP recognise and import the images) nothing happened at first, although it identified the card as a Nikon D70s; but when I tried the Import icon, that worked. A bit less smooth than I was expecting.

  • LR not showing all images on card during Import

    I have the latest version of LR.  iMac and Canon 7D.  With my camera tethered directly to my computer, I start the Import Photos process.  When the thumbnails begin to load, it seems like if I have a large amount of photos to import (from 8GB card), it always leaves off the last hundred or two (approximately).  They just don't show up.  I'll import what is visible, then go back and do another import immediately.  All the ones that have been imported show up as greyed out thumbnails, then the remaining images on card will be avavilable for Import.
    Why is Lightroom not seeing all the images the first time??

    Yes it is.
    http://micechat.com/forums/blogs/weekend-update/1532-wizarding-world%3B-toy-stor y-3%3B-main-street-disneyland-hong-kong%3B-classic-revolution.html
    Safari is unable to load any more images, works fine on the desktop, but not on the iPad.

  • Background, Images, & text is blacked out. I can not see any menus to edit anything... Help

    Background, Images, & text is blacked out. I can not see any menus to edit anything...
    The curser shows there are links when you move over. I have uninstalled and re-installed Firefox and restarted my computer with no luck.
    I can not see the menus to try and reset Firefox or change any settings.
    HELP Please

    hello obrienn214, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
    in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • I have a MacBook Pro running 10.7.2.  I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade.  iPhoto does not see the camera nor does Image Capture.  IC says there is not a camera connected.  Cable is known good.

    I have a MacBook Pro running 10.7.2.  I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade.  iPhoto does not see the camera nor does Image Capture.  IC says there is not a camera connected.  Cable is known good.  Has something changed?  Thanks!

    If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
    Try reformat the card, change the ports and/or use a USB Card Reader.

  • Inline item mx:Image ... in mx:itemRenderer could not see the defination of method

    I have following code and got a compilation error ("possiblely called an undefined function") because the <mx:Image ...> in the <mx:itemRenderer > could not see the defination of "aMethod" method:
    <mx:Form ....>
    <mx:Script><![CDATA[
    private function aMethod(evt:Event):void {
               // code...
    ]]></mx:Script>
    <mx:Canvas label="Tile View" width="100%" height="100%" >
              <mx:TileList id="photosTileList" dataProvider="{this.photoDP}" width="100%" height="100%"  >
                        <mx:itemRenderer >
                            <mx:Component>
                                <mx:Image horizontalAlign="center" source="{data.url.text()}"
                                    toolTip="{data.caption.text()}" width="55" height="38" complete="aMethod(event)"/>  <!-- It causes the error -->
                            </mx:Component>
                        </mx:itemRenderer>
             </mx:TileList>
             <mx:Image .... complete="aMethod(event)"/>  <!-- It is OK here -->
    </mx:Canvas>
    </mx:Form>
    I do not know why the inline <mx:Image> inside <mx:itemRenderer> can not see the "aMethod" function defination in the same mxml file.
    Any suggestions?

    You need outerDocument, and the method cannot be private, it should be public:
    complete="outerDocument.aMethod(event)"
    If this post answers your question or helps, please mark it as such.
    Greg Lafrance - Flex 2 and 3 ACE certified
    www.ChikaraDev.com
    Flex / AIR Development, Training, and Support Services

Maybe you are looking for

  • J2EE Engine is not comming up.

    Dear All, I was trying to run BSP applications on BW to accomplish this I change WORKGROUP to domain to create FQDN.(NW04 is running on Windows 2003 server). My system is dual stack system. After restart I can login to the ABAP system but & JAVA Engi

  • Colour Corrector and 3 Way

    I have shot 2 views of the same scene of paving stones and i need to match the colours, i'm relatively new to this so please bear with me. One of the cameras has the perfect colour paving colour, whilst the other is too cool, in Colour Corrector and

  • Material Determination- Pricing

    Hi All, I am working in Material Deterimination ( based on ATP). for eg: if the Product X is 10 QTY , when i create the sales order for Product X for 20 qty , system should pick 10 from X and remaining 10 from Y ( which we mentioend in COndition reco

  • How to show  an album of pictures in  random or shuffle  order?

    On the bottom of my iPhoto09 album page I have four icons - slideshow - book - calendar - card. I want to see the slideshow in shuffle mode, but it always shows the pictures in the same order. I've read that earlier iPhoto editions have a setting for

  • Procedure help using ( owa_sylk.show ) function

    hi all, i try to run this but i am getting error as : ( PLS-00306: wrong number or types of arguments in call to 'SHOW' ). what arguments missed can any one please. i am asking because i am very new to procedures. declare output utl_file.file_type; b