Images on imac display too sharp/detailed

I just got my first imac and I've been learing the ins and outs. One thing that bothers me though is that when I'm visiting many web pages I find that images, thumbnails, movie clips, etc. are rendered with so much detail they tend to look distorted. I've been searching for a way to dial down the sharpness overall and I can't seem to make it happen. All I've been able to find are the display settings which jump from 1440x900 (which I'm using now) to 1152x720 (which is muddy and ugly). I enjoy the sharpness and clarity of my monitor when it comes to viewing text but for film clips and jpegs I prefer a softer focus.
Anyone else have this concern? Is there a way to fix it?
17" imac 2GHz intel Mac OS X (10.4.7)

Could adjusting the brightness and other settings, perhaps making a
custom profile in displays, changing contrast, etc could help.
The only other mention of displays being too bright and/or clear was
in reference to the new 24" iMac Intel® computer, and some posters
in a forum stated ideas, here: Decrease Brightness Further?
On my older iMacG4 1.25GHz 17" USB 2.0 I chose to adjust down the
brightness (keyboard buttons F14 - F15) to save the display backlight
from premature failure; even while having AppleCare coverage in effect.
To run an LCD or some VGAs too bright can be hard on your eyes when
sitting close and using the computer for longer periods of time.
Hope you find a happy medium and enjoy your new iMac!

Similar Messages

24" IMAC Display Too Bright

I am still doing DD on changing from WinTel to Apple. I have viewed both the 20 inch and 24 inch models at a local reseller. I have heard of several complaints that the 24" is too bright. Is there any validity to this complaint? Can the Brightness be easily adjusted? And a third question are there advantages to using a local reseller rather than a purchase directly from Apple re the net?

Hello,
The iMac 24" isn't an iMac (Flat Panel) in Apple's eyes so those of us in this forum won't be nearly so familar with specific issues like the brightness of the display on the 24" iMac. You should re-post your question here.
Of course the local retailer you can speak to face-to-face about your requirements and return it for support in the very unlikely event you have any issues. The online store may well be a very little cheaper and will probably have better build-to-order option.
G4 (Flat Panel): Intel:
regards
mrtotes

Attached images display too large

when using mail in os 10.4, if someone sends me a message with pictures attached, they are at a size that you can see the whole picture when you scroll down in the message. if i forward that email to someone, the pictures display too large and you cannot see the whole image in the message. is there a setting for this somewhere?
thanks

BDAqua wrote:
Ah thanks, maybe I was experimenting with too small of pics!?
Hmm, interesting...
Mail will remebember the size and will automatically use it the next time you attach an image if you forget to manually change it back.
And if the last setting was small, the menu may be there, but will have no effect since you cannot Scale up!
Yes, it works only for downsizing.
Also, it seems that if the pic is in quoted nesting the size setting has no effect!?
On Mac OS X 10.5 and later it works regardless of quotation. If it does not on Mac OS X Tiger, it must be a bug that was fixed later.

Images are not displayed in Details Page of Open script

I am trying to record a web application with open script.
After recording the images are not displayed when playing back the script.
Are there any option we have to enable to get the images.

Hi
As per default OpenScript will ignore any URL that contains an image, to change the filters you can:
View -> OpenScript Preferences > Record -> HTTP Module -> Select the URL filters Tab to add/remove or edit any filters
You can un-check the first one on the list to enable image recording.
Regards
Alex

Slow system and too many details after upgrading to OS/Lion

This MacBook Pro is my right hand, I was doing so great with Snow Leopard, Now everything takes twice longer. I cleaned up, reseted, reinstalled softwares, etc. same.
Too many details that doesn't work correctly.
-Safari constantly needs to be loading. Some times Firefox.
The track pad cant keep open a display box with a long list, once you try to scroll down.
-Preview, i used this app a lot, safe me time, DUPLICATE? instead of SAVE, i don't see the purpose. After editing images and safe them, gamma, color patterns and light appear distortion.
-iTunes volume doesn't comeback after using Skype or another app, remains low.
-Airport takes a bit longer to find a local network.
-There is not an extra space for the left and right scroll bottom on the finder window, sometimes this one disappear but mostly remains which makes it pretty tricky to open the last file at the bottom of the list. because the scroller is on front.
-External Drives, takes longer to connect or disconnect them.
Suggestions before i reinstall Snow Leopard.

guizz,
it sounds like you have come across the mother of all problems but i would like to help as much as i can.
first of all, i noticed that it took a few days after installing lion before my system was back to the full stride it had while running snow leopard give it some time and a few updates and lion should speed up because components such as ram take time to adjust.
the duplicate thing in preview is a new thing that came out with versions, one of the many new features in lion. i think it takes the place of the SAVE AS... command and you should still be able to save using the old command-s keystroke however part of lion includes an autosave feature so you really never have to worry about saving your work.
i personally cannot speak for safari or firefox even though i have both because i use google chrome as my web browser you can always give that a try.
in the system preferences under the general settings option you can change how the scroll bar is displayed on the screen.
i would suggest searching for other people who have had similar problems with itunes to try and find an answer
as for everything else your system may just need time to adjust to lion
good luck hope this helped a little

Colour Calibration / White Point setting - Is Imac Display really professional quality

I am trying to calibrate my imac 27" using i1 Display2 calibration software. I am trying to set a traget of 6500 using the software but it advises the current is only 5600 and suggests moving the RGB sliders to get this current white point up to my 6500 target. Unfortunatly i have no idea where i find these sliders on my imac. Can anyone advise how i change my current white point to get to the 6500 target?
Also, on the brightness issue, does shades work to reduce my brightness or will it simply interfere with my colour calibration?
Finally, i was going to use my iMac for professional photography. (Mainly on line but some print work required). Honestly, is the iMac display up to the job or should i consider changing
Thanks
Gary

Corbybhy, the glossy screen is the biggest and silliest myth out there. Really.
I have been a professional art director & designer for over 26 years, and by the way, for many years my high end professional CRTS were made of glass (and glossy). Another myth is that the screens cannot be calibrated, and are too bright. Hogwash. I use Spyder3Pro and have had few problems, guessing your device will be the same. Actually, the monitors seem to stay consistant for a heck of a lot longer than the old high end CRTs did. In the old days, most professionals calibrated to 5000k, but these days 6500k is the standard.
The amount of MISINFORMATION that is being spewed always amazes me. If you can keep your lighting consistant and somewhat dim, your life will be easier. Reflections are simply not a major issue, and are also overblown as a issue (by the way, my iMac sits next to a window, I just use shades to dim the ambient light).
I work mostly in print, and produce mostly publications, advertising & marketing materials. I have ZERO issues with my screen matching my proofs. ZERO. I do a huge amount of imaging, retouching & post-processing... all from my 27" iMac.

How do you know the best iMac display size

how do you know the best iMac display size
Only on them fits in the screen window and that makes the font so tiny. The others are too wide or too tall. I usually view at 150 - 200% for vision issues.

You say it's better to do the Media Browser? I'm fairly new to movie, dvd and garage band. How would I go about using the Media Browser instead of straight to iDVD?
Select Your project - go up to Share - Share to Media Browser and as Large (Not HD)
In iDVD select a nice theme - click on Media button - click on Movie - Select Your movie.
NOW - Save as a DiskImage - and test this before burning DVDs - if this Plays OK then either burn the Image by using Disk Util tool (and set down burn-speed to x4) - or burn via iDVD (will take more time)
I want to keep as much quality as I can.
Then don't use iMovie'08 or 09 or 11 - as they all discard every second line resulting in less quality on the DVD. I use iMovie HD6 or FinalCut any version.
Also...I tried to split my project in iMovie...but couldn't find a way. I wound up just making a copy and then deleting out a handful of scenes from the copy...I still have the original at 4:12hrs. Is there a way in iMovie to split a project?
I would make a copy and cut away a bit from the end - calling this Part 1 and from start of the other copy Part 2.
OR - there are other programs that can squees in more to a DVD e.g. Roxio Toast™ - BUT this has two cons.
• It costs - to me it was well spent mony as it can so much more e.g. back engineer a DVD to an editable form
• Squeesing in more on a DVD - costs in QUALITY - and as You want as much as it can be - then 90 minuts portions encoded with Pro-Quality encoding and full quality interlasced material from a video-editor that delivers this is the way to get 100% of what DVDs can do.
DVD is as standard only SD-Video - HD not possibly. Then You need Blu-Ray. (also Roxio Toast™)
Yours Bengt W

Some digital photos too sharp

Dear All,
I have a problem with some digital photos being too sharp and causing problems with pixelation and jittery sections after being burned to dvd thru iDVD and DVD Studio Pro. I must go back and blur them in Photoshop to get rid of the problem, then reburn the DVD. What is the explanation for this? It is very unnerving to proof a dvd and then see these jittery sections come up that are not apparent when viewing through Final Cut Pro's timeline or in iDVD preview. Other photos taken on film don't cause the problem, only SOME digital photos either taken with a digital camera or clip art that is in digital form to start with.
Barbara Smits

What is the explanation for this?
Probably two things:
Video images are interlaced (two video fields make up one video frame) - with very sharp images, the high frequency detail can be slightly different in the two fields resulting in flicker as the interlaced image switches back and forth between field.
The sampling theorem says the sampling frequency must be twice that of the highest detail in an image or else the high frequency detail will be aliased as low frequency detail. Did you ever shoot a fine checkered pattern and see color bar 'smears' in the picture. Normally resizing the image in something like Photoshop usually removes the problem causing high frequency detail - but not always.

Since i upgraded to Yosemite, my iMac is too slow

Since i upgraded to Yosemite, my iMac is too slow. For example, at the starting up, it needs minutes 34" to open.
When i open a window / folder, i need between 1 and 2 minutes. By opening a pdf or an other document i uses 2 to 7 minutes.
WHY? How can i change this?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/[AD]/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Intel imac display glitch and involuntary restart

Just want to know if anyone else has experienced this specific problem, there are plenty of complaints about intel imac displays but I can't be bothered to sift through them all trying to find a match for my problem.
A couple of months ago I was watching a video in quicktime and noticed that my screen was glitching and flashing fragmented diagonal lines - like a commodore 64 loading type thing. Then the spinning-ball came up and a force quit didn't do anything so I had to force shut down. I started up and it occured again. Then the screen went blank/black, but still lit up, and restarted without me doing anything. It also got stuck during start up the second time this occured. I panicked and ran out to buy a 500GB external drive, backed up all of my work and then re-installed mac osx from disk, archive and install job. This seemed to sort it and for the following two months it seemed OK. No sign of any problems.
Since then I have updated from 10.4.7 to 10.4.10 (which I have suspicion that it screwed the firmware in my motu 828 firewire audio interface, costing me a £130 repair - but that's another painful story).
It happened again tonight (the screen thing, not the motu). And the ball came up and I couldn't do anything. Force shut down, restart - screen glitching again. Then I had 2 unexpected restarts, one getting stuck in startup. Then a successful startup but accompanied by the glitchy graphics, mainly red/pink pixellated diagonal lines flickering in and out. I ran a disk first aid - no problems. Did a disk permission repair. Shut down and ran a hardware test, the first few minutes of the test the screen was still at it but then stopped glitching, hardware test found no errors (it was an extended test too). Now I'm back on it and it's all OK.
Any suggestions/similar stories?
When it occured 2 months ago I had the original ram that came with the imac. Now I have 2x1GB sticks of crucial ram.

That's it! Well, that's what I have. Unfortunately, I don't know about the cause, but I don't ever recall having it prior to an update going back about a year ago. I recall an update, and that update being immediately followed by some sort of Apple Graphics something-or-other. I feel pretty certain that's when I first noticed this. I just had my LCD replaced for another reason, but I think you'll agree, it's not an LCD issue. In my case, browser activity, scrolling up or down in a page, seems to be the most common trigger. I've also seen "pieces" of the torn page, on the screen when minimizing the browser to the dock (usually Firefox, but I think I've seen it with Opera and Safari too). Is there a way to find update packages installed somewhere? I'd know it if I saw it, and I'd definitely try removing that suspect package/update.
Message was edited by: geekboy2000 - corrected OS

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

Latest iMac display vs. Cinema Display

I posted this also on the Intel Mac Displays area, but wasn't sure if that was the best place.
I'm hoping to get a new Mac for graphic design at work. I'd love to get a tower unit and 23" display, but I may need to save the company money and go for the iMac with maximum RAM. At home, I have a 20" Cinema Display with my G5 and a 17" iMac (all just prior to Intel conversion). The iMac display doesn't look as clear and sharp as the Cinema Display.
Can anyone tell me how the latest iMac 24" display compares with a 23" Cinema Display, as far as quality of what you see? Is the graphics card the determining factor?

I'm not sure why you would think the 17 inch iMac didn't look as clear as the 23 inch cinema display. I've seen a fair few of them, and they look fine to me.. The graphics card shouldn't have anything to do with it.
I've seen a 24 inch iMac and both the clear and metal 23 inch Cinema displays, and the display quality seems comparable to me. If anything, the metal cinema display and iMac are better than the clear cinema display.

Image Doesn't Display in Region

Hi All,
i have add picture of employee in my form with report option.employee picture is display in report .
For editing i have created an region for edit Employee Image .
Now problem is when i click on Edit Button in Report then control move to second page but Emploee image Does not display in Image Region .
My Image Region Code
Image Region Condition PL/SQl Funtionon Body Returning Boolean
declare
begin
if :P20_EMPLOYEE_ID is not null then
    for c1 in (select nvl(dbms_lob.getlength(EMP_IMAGE),0) l
               from HR_EMP_PERSONAL_INFO where EMPLOYEE_ID = :P20_EMPLOYEE_ID)
    loop
      if c1.l > 0 then
        return true;
      end if;
    end loop;
end if;
return false;
end;i have created one Display as Text (Save State ) ITEM.
Source Type
return '<img src="'||apex_util.get_blob_file_src('P20_EMP_IMAGE',:P20_EMPLOYEE_ID)||'" />';Item Condition type Exists ( SQL Query Returning at least One Row)
SELECT mimetype from HR_EMP_PERSONAL_INFO where EMPLOYEE_ID = :P20_EMPLOYEE_ID and mimetype like 'image%'My First page Report Query
select EMPLOYEE_ID,
EMP_NAME,
EMP_DOB,
EMP_MARITAL_STATUS,
LOCATION,
DESIGNATION,
decode(nvl(dbms_lob.getlength(EMP_IMAGE),0),0,null,'<img src="'||apex_util.get_blob_file_src('P20_EMP_IMAGE',EMPLOYEE_ID)||'" height="75" width="75" />') Picture from HR_EMP_PERSONAL_INFO
Where is i am wrong .How can i display image in Image Region.
Thanks
Edited by: 805629 on Feb 2, 2011 2:34 AM
Edited by: 805629 on Feb 2, 2011 2:35 AM
Edited by: 805629 on Feb 2, 2011 2:36 AM
Edited by: 805629 on Feb 2, 2011 2:43 AM

Hi jairohernan ,
use WORKSPACE_IMAGES or APP_IMAGES instead of IMAGE_PREFIX
<img src ="#WORKSPACE_IMAGES#LOGO.jpg" />
Note : Give More Details to get quick solution.
Regards,
Jitendra

How can we change the color of the image for product display for different

Hi All,
How can we change the color of the image for product display for different colors, to be displayed on site.
jeff

Hi priya,
The requirement that you have stated is not a standard feature in ISA CRM. In order to do the same, you will need to modify the standard ISA code in Java. A common path for the solution would be as follows:
1. Colours
    a. Maintain a text type for Color under the object - PCAT_ITM in Customizing.
    b. Modify the standard search of ISA to search within your new text type as well. (In standard it only searches in Description.
   c. Maintain all shirts colour data in the new type created in step a.
   d. Your requirement will be done!
2. Price
a. Use list prices for your shop and assign the appropriate condition type, acces in your catalog.
b. Modify the standard search of ISA to search on the list prices as well.
c. This too will be done!
3. Accessories - This is very tricky, and will require some exploration. However, here's my opinion,
a. Search for the standard function module, which will return the accessories when provided the product as an input.
b. Modify this function module according to your requirement and ensure that it can be accessed remotely.
c. Modify the JSP as in steps 1b and 2b above to call this new remote-enabled function module.
d. Now you're done!!
The ISA modification part is not so simple, you need a really good guy like "Sateesh Chandra" who'll be able to handle your requirements. This is all I could manage, hope it is some help to you!
Thanks & Regards,
Nelson.

Images Do Not Display on Signature Reply Emails _ Outlook 2010 Professional

I created a company signature which display fine when sent, however when replying to an email the signature shows up with out any of the images. There are simply blank squares where the images should be displaying. Can anyone help me resolve
why this would be happening?
*Would the device (i.e. iPad) one is viewing the email on be the reason for the issue?
Thanks,
Julia

Hi
As per the information and details provided by you, outlook 2010 not showing image in signature during replying emails, to solve this problem please follow these steps:
You mentioned that you are using a device, i.e. iPad.
Mobile device supports only Plain Text and that’s why the signature image is not showing in your emails.
If your picture contains crucial information which you really want in your signature. You can
customize your Plain Text version of your signature to include that information in a typed form instead of as a picture.
HTML format is capable of displaying different kinds
of font style as well as graphics like a logo.
You can set the email format on the
Format Text tab of an email message window in Microsoft Outlook 2010.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Images on imac display too sharp/detailed

Similar Messages

Maybe you are looking for