Images pre-edited when opened in Editor

I have used PSE 11 for a few years and all of the sudden this week my images are being "auto edited" when opened.  When I open an image in Editor it has already been edited a bit… it looks different than the image in Organizer.  I want to edit the images myself.  Did I accidentally turn some "auto edit" on?  How can I turn this off?

I just figured out that after the image is opened in Editor, I can go Image-- Convert Color Profile-- Remove Color Profile.  That gives me the original image.  But, does anyone know how to turn this off for good?

Similar Messages

  • Why fuzzy images when opened in Editor ?

    When opening images in the editor the edges of the image are jagged and fuzzy.
    They seem ok at 100% but at the lower magnifications, less than 50%, problem.
    To me it is very noticeable and the image just looks wrong.
    I have tried trial versions of Elements 8 and 9
    I have the same problem on XP64 and Windows 7 64bit
    My comp specs as follows:
    Intel Quad
    ATI Radeon HD 3400 series
    Monitor ASUS VH222H
    I suspect this is a software issue because the images look fine in Picasa
    and other programs.
    Thanks for any help.
    Mike

    Can you post a screenshot?

  • Photo went black when opening in editor!

    Hi there,
    I thought I'd try the editor in Photos. As soon as I opened my first image it showed up black in the editor. I didn't touch any controls, it happened immediately. I got out of the editor and the thumbnail had gone black. The image is now just black. Revert to Original is not available, show referenced file is not available.
    It is an old (2010) PEF raw image from a Pentax camera. This image showed up fine before opening the editor.
    I am terrified I may lose my photos permanently, just because I open the editor!!!
    Any help appreciated.

    It's AMD that have been doing the tweaking/correcting. Catalyst 13.1 can be problematic for any version of Ps that uses OpenGL although you may not have exposed the problems until yesterday. Your example image shows the bug where a pixel with red component of zero is displayed as completely black.

  • Images not displaying when open in Dreamweaver

    Hi, my images on the page
    oldfortestates.com/about_st.vincent.htm do not display properly
    when open in DW however they do on the server when opened with a
    browser. They are stored in the images folder in the site root. I
    have this problem with all my pages...

    Going back to my original comment, if you change the name
    http://oldfortestates.com/images/table_bck1.JPG
    (File Not Found)
    to
    http://oldfortestates.com/images/table_bck1.jpg
    the image is there.
    > However, how should I ever get all those errors fixed.
    Isn't it easier to
    > just make a new page.
    If it were me, yes, I would start over.
    >Is there a quick way for me to just create an exact copy
    of my pages in a
    >template page where I can after just copy and paste all
    the different page
    >infos into.
    I am far from being the best person to give advice, I would
    steer clear of
    javascript menus for a start - they don't work with
    javascript turned off.
    There are many good ones recommended here,
    www.projectseven.com and others
    Start with a clean page and investigate Server Side Includes
    with a good
    menu (see many recommendations here) or, as you suggest (you
    don't have many
    pages), a template.
    Make sure you save the template File > Save As Template.
    >then rename the individual pages
    No, create child pages from the template, giving them names.
    I wouldn't
    rename anything you already have, the code is... bad.
    Check out your validation errors to make sure you don't
    repeat your
    mistakes.
    You'd be wise to look at
    http://www.w3schools.com/ for
    HTML and CSS.
    As I said, I'm not the best person to help but hope this does
    a bit.
    Jo
    "atomic king" <[email protected]> wrote in
    message
    news:gjoqqr$nk5$[email protected]..
    > Thanks so much Joise1 I will try to see if I can get
    that image to work.
    > However, how should I ever get all those errors fixed.
    Isn't it easier to
    > just
    > make a new page. Is there a quick way for me to just
    create an exact copy
    > of my
    > pages in a template page where I can after just copy and
    paste all the
    > different page infos into and then rename the individual
    pages. What do
    > you
    > think?
    >

  • Help, image is resizing when opening PH3 out off LR2

    Hi guys,
    i have a problem when I open a 10,2 MB image from LR2 with PS3. It will open in PS3 but has rezised to 51MB. I use MacBook Pro.
    What can I do to change that!
    Cheers Dirk

    Dirk,
    Where are you seeing the file size change? File formats that use compression, such as .jpg and .psd will balloon in size when opened, but store compact.
    Neil

  • Am changing from elements 13 trial to full version,but when opening the editor it keeps asking for me to sign in and input serial number

    I have been trying to get elements 13 working for a couple of weeks, after many hours of chat with support and them using remote access, it has still not worked. However, having been on several websites I have made progress and it is now running as the trial version.
    The organiser works fine but every time I open the editor, it asks me to sign in and requests the serial number followed by the message "verifying serial number" which disappears after a few seconds. The same thing happens every time I open it as if my serial number is not being accepted
    Please help

    InDesign CS2 will not be able to open PM files on XP SP3, Vista, or Win 7.
    Bob

  • Image pixelated when open in editor

    I have several pictures that I shot in RAW.  I start in the organizer and right click to open them in the editor.  At first, since they are shot in RAW, they open in the RAW editor (I don't remember the correct name), I make my changes, and then open the image, there are parts of the image that are pixelated.  Anyone know what causes that and how to fix it?  It is very strange.  I've never had that happen before.  Thank you.
    Heather

    What adjustments are you making in camera raw? Make sure you are not over sharpening or pushing up the clarity slider too much.
    Are you using raw files straight from your camera and not raw files created in iPhoto from an original?
    　 

  • Elements 8 Organizer crashes when opening from Editor

    Hi,
    on my new OS Win7, 64-bit Elements Orgenizer (EO) shuts down with an error message after the following actions:
    Open EO
    Select a foto and open it in Elemtns Foto Editor for editing
    Return to the Organizer before or after any modifications to the foto via the Organizer-Icon in the right corner of the menu bar of the Editor
    After a few milliseconds the Organizer crashes and a big white box appears telling that Organizer was shut down because of an error and asking wether an error report should be sent to Adobe.
    This situation newer showed up on my old Vista (32-bit) system, where I had the same version of Elemnts 8 installed. I already sent several error reports to Adobe - no response yet. Running the program in XP (Service Pack 2) or Vista (Service Pack 2) compatability mode didn't fix the problem. I think Elements 8 has a problem when running on a 64-bit system.
    Are there any suggestions or hints on how to avoid this crash or how to proceed?
    Thank's in advance
    Helmut

    Unfortunately, there are many reasons why the PSE Organizer might crash, and often it is hard to diagnose quickly the reason for the crash:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Troubleshooting_Organizer_ crashes
    To help others, please let us know if any of those steps solve your problem.

  • PSE7 when opening the editor only the upper half of the picture is displayed

    When I open a picture in the editor only the upper half of the picture is displayed in the lower part of the screen. I tried adjusting the size of the canvas but that didn't work.

    Window>Images is not highlighted so I can't use that. Here is a screenshot:
    Thanks for the effort!

  • Photoshop diplays all images with desaturated colors (Images look fine when opened in other apps)

    All of a sudden, when I open any image in Photoshop, the colors appear to be desaturated...In Photoshop only. When I open that same image in Window Picture Viewer, or Quicktimer, or even if I drag the image into a brower window, the colors appear fine. But in Photoshop, something is clearly wrong. Now, I can make color adjustments to the image, but when I save and reopen reopen it in another application, I can see that color changes have been made, but they still don't match what Photoshop is displaying.
    The images are RGB image...I've checked the color space setings in Photoshop, and they are the default (Edit > Color Settings: North American General Purpose 2 / RGB: sRGB IEC61966-2.1 / CMYK: US Web Coated (SWOP) V2, etc, etc). I also made sure View > Proof Setup was set to: Working CMYK. I even reset Photoshop to it's default settings (by holding down CTRL-ALT-SHIFT on launching Photoshop)...But the images still appear desaturated when I open them in Photoshop...So, I don't understand how this is still a Photoshop problem...But then again, they look fine when I use any other application on my computer to open them, so it's clearly not an issue with my monitor.
    The frustrating thing is, I haven't made any changes to Photoshop OR my monitor (that I know about)...Photoshop has worked perfectly for me for years, and now there's this SNAFU that I just can not figure out.
    Any suggestions?
    I've included a screenshot below to show the disparity between an image opened in Photoshop (on left) and Windows Picture Viewer (on right):
    Photoshop image on left, with desaturated colors...Same image in Windows Picture Viewer on right, where colors appear normal.
    Any and all help is much appreciated : )
    Best,
    -Austin

    It's difficult to provide help without knowing your level of color-management expertise, but I think you've helped us some with that in post number 2.
    Color management is basically this:  Images and devices have certain color characteristics, and these are described by color profiles, sometimes also called color spaces.
    1.  You should not need to use the Proof Setup at all to view your images on your monitor.  When things are set up properly Photoshop shows you accurate color without your choosing View - Proof Colors.
    2.  A color-managed application like Photoshop will try to show you accurate color on your display by interpreting both the image profile and your monitor profile and transforming the colors accordingly.  BY DEFINITION this will look different than other applications which don't do color-management as these just pump the image RGB values directly out to the display. 
    Thus:
    If your monitor profile indicates your monitor has a wide gamut, images with embedded profiles may appear less saturated inside Photoshop than from non-color-managed apps.
    If you view images that have an embedded wide gamut profile (such as Adobe RGB 1998 or ProPhoto RGB), Photoshop and other color-managed applications will interpret that profile and the colors will likely appear more saturated in Photoshop than in a non-color-managed application.
    It sounds as though the first case applies in your case here.
    You can check to see what monitor profile is associated with your monitor through OS settings.  I'm thinking, based on the caption buttons in your screen grab, that you've got Windows XP, but rather than go further with that assumption, I'll ask you to verify it first.
    -Noel

  • Pse trial v12 installed but when opening the editor it shuts down after 2 seconds, what can be the problem? I have windows 8.1 64 bit with the latest video drivers installed. Thanks

    PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
    I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
    I also installed premiere elements version 12 with the same problem.
    What can be the problem here, please help?
    Thanks.
    Wim.

    Hi roberto-
    Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
    -sag

  • Image colour changes when opening in Adobe Flash

    Hi folks
    I'm a complete novice when it comes to Flash so I hope you can help me out. I've been trying to open a jpeg image in Actionscript 3.0 which opens without any issues however part of the lettering in the image appears to display as a different colour as if Flash doesn't recognise the colour in the image. The strange thing is that it opens in photoshop as the correct colour but not in Flash. Would the colour scheme that the image uses perhaps need to be added to Flash database of colours?
    Your help is much appreciated.
    Thanks

    Not to worry figured it out.
    When I open the image in photoshop the default Image Mode was set to CMYK Color. I changed this to RGB Colour, re-saved the image, exported it to Flash and it's the correct color.

  • Why are my images suddenly desaturating when opening in Photoshop?

    HELP!
    When I am opening images in Photoshop now they are desaturated. I can open images that are 5 years old and it does it for every one. I thought it was a Photomatix issue but realized it happens with every image in my catalog
    Thanks!

    "Catalog"?  Are you referencing Ps Elements perhaps?
    Wrong forum.  We do not do Elements here.
    Here's the link to the Elements forum:
    Photoshop Elements

  • Why do my images look blurry when opened in photoshop?

    Hi! i was just wondering if i could get some help with a problem i've been getting since yesterday.
    Before yesterday morning, my photoshop was working just fine but then yesterday morning when i opened this image.
    It would look like this
    instead of it looking like the first image above, the thing though is when i export the image from photoshop as a png, jpeg or any other it looks normal again like this.
    This is the first time this has ever happened so i'm not really sure about what to do.
    I'm using photoshop cs6 and i've also uninstall and reinstall photoshop about 2 times now but it doesn't fix it
    so if anyone can help me that would be great.
    Thanks.

    ssprengel wrote:
    The screenshots you’ve posted look very similar to me, but they are all composed of tiny dots not a continuous-tone image.
    Yes.  They don't make any sense to me either.  Are we supposed to be looking at a blank dark gray rectangle, or has the upload process failed the OP ?

  • Images very "grainy" when opened in PS CC...why??

    Hey people! I'm pretty green when it comes to PS and I have ONE problem (i'll solve the others on my own...) I tested the free trial version of PS CC and all was sweet. After the trial I started to subscribe to PS and the problem is that when I open an image its all grainy, very grainy. Black and white images are super grainy and everything looks just bad.... What's going on? I use a PC, Win 7.
    Thank full for any help on this matter!
    Kind regards
    Neil

    If the images looked ok before, it could be a video driver issue. Try updating the driver and see if it fixes the issue.

Maybe you are looking for