Images rotated when added in slideshow widget

When using a slideshow widget in Muse, why are added images
displayed 90 or 180 degrees from the original image?

Thanks for the quiuck reply - it is really appreciated. Further investigation resulted in discovering that only photos from my iPad are being rotated. Still don't know why. All other photos are OK. The iPad photos took a circuitous route getting to my computer - but don't know why that should matter. Guess I'll have to delve into the HTML code to see if I can find the problem. If not, I may need further help!

Similar Messages

Images darker when added to slideshow

I've recently noticed that photos added to a new slideshow appear — within the slideshow interface and when exported — much, much darker than the original photo. It's as iff the black point for the image has been cranked way up and virtually all detail in the shadows goes to black.
It's been a while since I worked within the slideshow interface of Aperture, so perhaps some small detail of slideshows is eluding me. Has anyone else noticed this kind of behavior and is there an easy solution?
Thanks!

tnx for the info Test Screen Name,
You were right about the resolution, the smaller pic had 300dpi while the bigger one have a resolution of 96dpi,
Why i didn't tough of that
This explains why one of the image is 3x bigger than the others.
I'm not sure why paint switch the resolution like that.
Now i know to work with image in inch / mm
Thanks again for you help, you saved me alot of time trying to figure that one out.
Yan

Slideshow image resizing when adding new images

I am creating a series of slideshows on multiple pages. I created one slide show using the "basic" slideshow and resized it to the dimensions and settings I wanted. I have many pictures all of different proportion, therefore, I selected the "fill frame proportionally" so they would all fit the dimension I set. I wanted to use this first slideshow as a template for all of the rest. I added images to this first slideshow with no problems. All of my different sized images scaled or cropped to fit within the dimension I set. The problem comes in when I do two things: 1) When I add other images of different dimensions to this same slideshow gallery, they come smaller that the intended dimensions I set previous. I check the setting and it is still on "fill frame proportionally" similar to the first batch of pictures. 2) The second issue is when copy this slideshow as a template to other pages. When I try to replace or add to the slideshow gallery, the images come in cropped or smaller rather than filling the frame. Again, the settings are still the same from my very first slideshow that worked just as i intended.
I could resize all the images to all the same dimensions using another program like photoshop, but that is another step that is very tedious and it would seem that it should be something built into Muse.
Is there a way around this?. Am I doing something wrong? Or is this just one of those glitches that happens with Muse? I appreciate any help that I can get.
Thanks!

Hi, I got it to work like this:
Using background colours in Photoshop so that all sizes are the same in pixels. Then manually adjusting thumbnails by double-clicking on them so that a red square appears.
Cheers,
Elsemiek
Op 26 dec. 2014, om 00:50 heeft MediaGraphics <[email protected]> het volgende geschreven:
slideshow image resizing when adding new images
created by MediaGraphics <https://forums.adobe.com/people/MediaGraphics> in Adobe Muse Bugs - View the full discussion <https://forums.adobe.com/message/7043933#7043933>
Hi there Elsemiekagain,
I had to fiddle around with my slide show to get it to work. That is, it worked at first, then went funky, and I had to fiddle. So much fiddling that I can't possibly know what actually made it start to work again.
And to some degree, this is the way that I find Muse to be in general. That it requires finessing to get it to work as expected. This adds a good deal of time to every development project, though I am getting better at this with practice and experience.
Most of it is not even things that could be easily put in words as instructions, as many are nanced. But in fairness, this version of Muse is a complete code re-write this year. So we do need to cut Adobe some slack, and give the team time to iron things out.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7043933#7043933 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7043933#7043933
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Muse Bugs by email <mailto:[email protected]ftware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 59>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Image Disappears when Adding Adjustments in Aperture 3

I am experiencing odd behavior when using the adjustment tools in Aperture 3. I tried to crop an image and instead of staying on screen for me to finish the adjustment, the image disappeared. I was able to save it by undoing. I created a version of the image and I could crop that OK. I have Add New Version when Making Adjustments checked but it does not seem to be working.

I've had a similar "disappearing" image problem when trying to apply the retouch tool. I don't have the "create version when applying adjustments" preference checked though. Hopefully these issues are additional 3.0 bugs that will get fixed in 3.0.1. Be sure to report the issue to Apple using the "Aperture > Provide Aperture Feedback" menu item.

Images rotated when viewed on ipods/ipads

Some images on ecommerce site are rotated 90 degrees when viewed on ipods and ipads. The site is http://ladiesdesignerfashions.co.uk and its not just images on the slider on the home page but also images on product pages. The images all appear to be set up correctly and I can't see why they are being rotated.

Hi Jim,
Could you please mention the models and OS versions of the devices that render the page with issues?

Image rotates when using the crop tool

New to Aperture my question is when I use the crop tool the image appears to rotate in one direction or the other. Then of course in limited to the size i can drag out the crop window by the edges of the photo itself. Any ideas

If you use the straighten tool first and then select the crop tool, Aperture will show the entire image including the parts that were cropped off during the straighten operation. Other than that, can't think of what you are seeing.

Dreamweaver querry image rotator vs flash animated slideshow

Hello
I am working to create a website.
On the header I dont know what is better to use a dreamweaver querry image rotaror or is it better to import
a flash slideshow?

jQuery is a widely used JavaScript library with lots of cutting edge plug-ins.
http://jquery.malsup.com/cycle/
Almost anything you can do with Flash you can do equally well with jQuery. And it is supported by most web devices (including Smartphones and iDevices).
Flash is not as well supported by mobile devices and it carries quite a bit more bandwidth.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Lose image rotation when moving files.

If I copy all of my images and the Lightroom folder containing the database from my desktop to my laptop images which I have rotated turn back to their original orientation. I am preserving the file dates, so I cannot fathom what is going wrong here. This is exceedingly annoying. Is there anything I can do to stop this from happening?

Exporting to xmp obviously does more than write xmp files. I did it on my entire image collection and it has written to every jpeg and dng file. I presume what that option does it export Lightroom data to the image file and in the case of proprietary raw files write it into an xmp file.
I have a load of xmp files associated with dng files (because I converted from RAF files to dng), should I delete those?

Why are some (but not all) of my Muse slideshow widget images rotated differently than when I edited them in Photoshop CC?

I have a few dozen photographs embedded in the slideshow widget. Most of them appear exactly as I edited them in Photoshop, but several appear rotated clockwise 90 or 180 degrees. Does anyone know why this is happening, and ideally, how I can correct this problem? Thank you.

Please share the site url , also refer to this post and check if this helps :
Why are some of my images importing upside down?
Secondly , if you change the fill type then does that makes difference ?
Thanks,
Sanjit

How do I set the default Hero image in a Muse slideshow widget when using Free Form Thumbnails?

Hello,
I am trying to find out how to set the default Hero image when using a Muse slideshow widget and in the Layout section I have the "Free Form Thumbnails"
box checked.
In other words, when the page loads I want to define which image displays as the first Hero image.
If I do not select the "Free Form Thumbnails" option, the top left Thumbnail image always displays first. This is fine.
But when I select the Free Form Thumbnails" checkbox I don't know how to define which image shows first as the Hero image.
I have a short video at this link where I illustrate the question:
http://amson.org/misc/default-hero-image-1.mp4
I have added a WMV video file at the link below:
http://amson.org/misc/default-hero-image-1.wmv
Okay… I think I've worked out how to do it!
[1] First have the "Free Form Thumbnails" box UNCHECKED.
[2] Organize the Thumbnails and place the image that you want to be the first Hero image when the page loads in the top left corner of the Thumbnails group.
[3] When you "Preview Site In Browser" the Thumbnail image in the top left corner will always display as the first Hero image.
[4] If you want "Free Form Thumbnails" go ahead now and SELECT that checkbox.
[5] Whichever image was in the top left of the Thumbnail group before you checked "Free Form Thumbnails" will still show up as the first Hero image when the page loads, regardless of where that thumbnail image is located within the Thumbnail images group.
Thanks very much.
Chris.

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

Help w/ image rotation in slideshow

Hi All,
I've created a bit of a problem for myself. A client provided a folder full of images to add to a slideshow in DVDSP. I added all of the images as normal, then I noticed that a bunch of them were taken in portrait mode and needed to be rotated. I didn't see any way within DVDSP to rotate them, so I opened up the folder in Adobe Bridge and quickly rotated them. I went back and opened the project in DVDSP and the images did not rotate. I trashed the MPEG and PAR folders and reopened the project and the images still did not rotate. So I figured that DVDSP doesn't recognize whatever tag Bridge adds to the file to indicate that the image should be viewed rotated. Next, I thought that I would just have to open each one in Photoshop and rotate them and then re-save. The only problem is that when opening them in PS, the images are already rotated. So now I don't know what to do. I can't rotate them again in PS and DVDSP doesn't acknowledge that the images are rotated.
Any suggestions?
Thanks,
Chris

Actually, Bridge does more than just rotating the thumbnails. It apparently embeds some code in the metadata that instructs programs to open the image with rotation applied. When opening the image in PS, Preview, GraphicConverter, and a few other programs the image opens with the rotation from Bridge applied.
In any event, I have an old PS action I created years ago that prepares images for slideshows. It fits them into a 720x480 frame and then applies any needed background extension and finally converts the image to a .9 pixel ratio image. I did that to all of the modified images from Bridge and it worked fine.
If Apple ever bothers to update DVDSP again they should really address the inability of the program to handle this type of situation.

Thumbnail images of Thumbnail Slideshow Widget not releasing Tooltips

I'm running Muse v2.2 Build 6 CL 770942 and had mistakenly assigned a number of tooltips to a number of thumbnail images of a thumbnail slideshow widget. After deleting those tooltips via the contextual menu on selected thumbnails and the "edit image properties" item in that menu, and after re-publishing to my Creative Cloud-hosted non-live site, and after refreshing my page in Safari 6.0.1 (8536.26.14) running OS 10.8.2, the tooltips are still there. This seems to be a bug.

Sachin,
Here's the link to my page: http://van-garde2businesscatalystcom.businesscatalyst.com/ads-2.html
I cleared the cache to no avail.
I tried opening the page in Firefox 15.0.1, and the tooltips not only still appear when I rollover the thumbnails, but all thumbnails, menu links, and heroes are totally off the page to the right!!
Help!!!

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

Why does Bridge blow out thumbnails when adding new images?

Using Win 7 (64b) with CS6 and Bridge 5.0.2.4 x64 (CS6). I use Bridge in my workflow to catalog and tag images. I added 7000+ older photos in various file formats, Canon CR2, TIF, JPG, and PSD to my single directory containing all shots. As Bridge created thumbnails for all newly added shots, everything was looking good but then I noticed Bridge went back and lightened many of the thumbnails by ~ 1 EV. A few images were lightened by as much 2-3 EV and unusable (non-identifiable images).
When launching the non-identifiable image in Photoshop CS6 from bridge, tonal values and exposure are just fine. The images can be edited and saved. Tried solving by deleting image from directory. then restoring it (with different filename) before restarting Bridge. In one case, it worked. The newly renamed and regenerated thumbnail was fine. In other cases, no matter what I do, the image blows out.
This is quite frustrating. Thumbnails just plain look bad. Don't have a lot more hair to pull.
Thanks for any help

Hmmm. That's not very convenient and it doesn't prevent my mistake. At the cost of a lot more typing, it can prevent other scripts from accidentally referencing or colliding with your variable names, but it doesn't prevent you from accidentally colliding with other people's variables if you leave off the object qualifier when you are typing.
When I saw a reference to namespaces in something I was reading, It thought it was more like real namespaces (e.g. C++ namespaces) where you define a scope where all declared or referenced variables are automatically in that namespace unless they are explicitly referenced/declared otherwise. Does JavaScript not have that capability?
It would be more like this:
namespace MyProgram {
var i = 3;
// lots of other code here
With a real namespace, "i" wouldn't be a global variable. It's real name/declaration would be MyProgram.i or MyProgram::i depending upon the syntax.
Does JavaScript not have real namespaces?
I get that I can explicitly declare everything to a scope of MyProgram to simulate some benefits of namespaces, but that's a lot of extra typing and, presumably a bunch of extra work for the interpreter since there's at least one extra dictionary lookup for every variable or function reference.
--John

Low quality image when adding to iMovie

I have 2 movies that I want to remove some parts, but when adding to iMovie, it changed some video adjustments to a worst quality image.
This 2 movies had already bad image quality from the source, because they have very darkness frames and were filmed in VHS.
But they were reasonable to see, from Apple TV.
Now in iMovie they became worst.
The source is H.264, AAC 1280x720 FPS 23,97
The source is H.264, AAC 1024x576 FPS 23,97
What can I do ?

Available ?
More or less.
And how can I send a sample ?
Depends on the size of the sample and what space is available to you on a server. You can usually send snippets as e-email attachments up to about 10 MBs. If you have a MobileMe account, server space provided by your ISP, or other server space provided by a third-party service, then you can upload larger samples for FTP or webpage use and simply post/send me the URL, reference movie, or QTL.
When the movie goes to iMovie, the brightness decreases and the contrasts became more darkness.
Have you tried playing with the built-in "Video Adjustments" at all? Not the easiest thing to use but you can make some adjustments using it. In such work, "Less is usually best." By this I mean you should apply as little adjustment as you can get away with using.
Normally I would start with a "Level" adjustment. While there is an "Auto" button you can press to get some idea as to what the application says you need for a particular frame or range of frames, this setting can vary drastically depending on the individual frame being tested. So it would usually be a good idea to expand your clip and "test" a number of frame ranges to see what is a "typical" setting for the clip. If the settings are fairly uniform, you can go with the suggested setting or something reasonably close to save "blowing out" highlights. On the other hand, if the settings vary drastically, you my either wish to select an "in-between" setting of your own manually, or split the clip into sub-segments which can then be adjusted individually. NOTE: the auto "Level" adjustment does not affect other settings -- only the clipping points and does not include controls for half or quarter tone adjustments. Still it is my preferred starting point for making adjustments.
You can also try adjust the "Exposure" setting. This will tend to allow you to adjust the "Brightness" and "Contrast" uniformly by centering your color channel histogram but can easily be overdriven. "Brightness" and "Contrast" can, of course, be adjusted individually if you prefer but you may find the "Exposure" control easier to handle where the content is more uniform with regard to shadows and highlights. Lastly, adjustment of any of the previously mentioned controls will usually have some effect on color saturation. While they do not change the actual setting, they do tend to desaturate color as the other controls "lighten" the cast of your frame images. So, don't be surprised if the results "wash out" somewhat and you may need to touch up the saturation. But, once again, go easy as the saturation doe not increase uniformly and tends to "blotch" highlights and/or create color shifts in these areas.
About the only controls left are the individual color channel levels. I don't normally recommend playing with these arbitrarily as they then to shift the color cast/white balance of your content. As to the White balance itself, the "eyedropper" had little or no effect on the content I tested so I assume the it either did not work as described or the sample white/grey points I used for sampling did not require adjustment. As to the Balance Wheel," it does work well but like the color channel adjustments may cause more harm than help most novice users.

Images rotated when added in slideshow widget

Similar Messages

Maybe you are looking for