Images, text and iViews question?

Hi All
I am trying to 'jazz up' some of my pages and worksets to make them more appealing. I am good with programs like photoshop and I want to incorporate some images and text.
Are there any iviews that allow you to do this?
Thanks all!

Hi Phil,
you can use XML forms and the KM Navigation iViews to display images and text mixed together in different ways.
When it comes to additional capabilities as multi language support, inplace editing, etc. you would need to a lot of implementation or have a look at solutions like http://www.easywcm.com
Hope it helps,
Robert

Similar Messages

Is there a way to add images , text and button in the individual marquee of a carousel

Is there a way to add images , text and button in the individual marquee of a carousel ?

Write a custom carousel. Usually carousel components are just ULs that use something like jQuery to rotate through the LIs. The foundation carousel component is really just designed for some specific use cases. Generally I would just recommend rolling your own.

Image size and resolution question.

Is an image at W 48.667 x H 32.444 inches at 72 res the same as an image that I could convert in photoshop to 300 res and then the with "Resample Image" clicked off would be W 11.68 x H 7.78 at 300 res for printing purposes? I'm asking this questions because after exporting 200 images from Lightroom 1.4, putting them into an wedding album I realized the images were not at 300 res but the first size listed above. I'm trying not to have to rebatch and have to put them back into the album. I sent the question to NAPP and got this back"
"If you do the math you'll see that the answer is "no."
48x72=3456 pixels; 32x72=2304 pixels
11.68x300=3504 pixels; 7.78x300=2334 pixels."
I did the math and it comes up to 5760 vs 5830. Pretty darn close. So would an image printed out with both settings print the about the same quality or am I missing something?
Thanks
Bob

Bob's question is a common one. And one of the first that most of us struggled to understand. Let's see if I can shed some light to help clarify the matter.
o The image starts out with a given number of pixels from the camera, scanner, or whatever was its source. The resolution only matters when it comes time to print the image.
72 dpi was once a common resolution for displaying on a computer monitor. Today 90 dpi is more common monitor resolution.
o Let's assume that the image is 3504 x 2336 pixels (which I got from his size @ 72 dpi).
o In "image size", if you do _not_ have 'resample image' checked, all you are doing is _rescaling the image. The image resolution is whatever you enter ...
For example, if you enter 360 dpi -- the native printing resolution of many Epson printers -- you get a print size of 9.733 x 6.489 inches
o Let's say you want to print this image at 360 dpi in portrait on 13 x 19 inch paper with a one inch border on the sides. That would make the short dimension of the image 11 inches and the long would work out to 16.5.
To do that you need to _resample_ the image to change the size. More pixels will be made. The resolution stays at 360 dpi. So check the 'resample image' box.
After resampling to get the print size and resolution you want, the pixel dimension goes to 5960 x 3960 (from 3504 x 2336). Those new pixels came at a price, but that is a matter for another thread and a lot of personal bias.
Hope that helped.
P.S. The answer to your question, Bob, is yes. With resample off in PhotoShop, your original images should have gone to 11.68 x 7.787 inches @300 dpi.
In looking at the rest of your original post, it seems that the export didn't work the way that you wanted. Do I read right that the images turned out to be 11.68 x 7.787 @ 72 dpi? Can't help with that as I don't do Lightroom.

Why all of a sudden are my images missing and have question marks

Hi Guys,
Really irritating thing has started to happen when I use pages. I start my document as usual, drag and drop images into it then save. When I try to resave it complains of not being able to save the document. I then save as another file name, try to reopen and all my images are now boxes with question marks on them. I havent moved any folders or anything. Its only recently started doing this. I'm on Pages 4.1.
Can anyone help me please?
many thanks
HM

Look at my points mate!
1 in 7 people here bother thanking us for helping them, so the points don't really reflect how much work we put into answering their problems.
Some even provide basic information to help resolve their own issues. Some are like the Korean lady who asked me to set up a Korean DTP system for her years ago. It was obvious that she wasn't giving me all the disks necessary for the Korean installion, grudgingly I dragged them out of her one by one.
I remember looking her in the eyes and wondering exactly what was going on in her mind, I knew one of us wanted to get the job done and go home. Still a mystery to me to this day. But then she is not alone in this world.
Peter

Disk Image Password and File Questions

Hi, I created a sparse disk image to protect some files and included the password in my keychain. Can I reverse this decision? Also, if I delete the files in the sparse disk image, are the files deleted totally from my iMac, or are they just no longer encrypted and password protected? Thanks.

Thanks a lot, now when I open the image a password is requested which I prefer. Still, I've saved my Turbo Tax file in the image, but I'm able to open TT without supplying the password, shouldn't I be prompted for the password since it's in a password protected disk image? Unfortunately TT no longer protects files on a computer, a user is supposed to create an Intuit account to save the tax file password online. What a hassle.

Loss of image quality and logo question

1. Finally able to publish my presentation to PDF, but even though HD video, there was significant graphic loss. Any thing that I did incorrectly? Is there a way to correct this or publish in another format ( internal company site) to improve this?
2. Is there a way to have the presentation start off with no Adobe Presenter displaying while waiting for the presentation to start or have my company logo display while starting?

Hi
About the video that you have inserted on the slide, I recommend not stretching the video on the slide
Letting the size of the video being the original as imported, will give you better quality video.
As for the logo, you can remove the logo and add your logo by doing the following
1. Create a new file named logo.swf of dimension 47 x 27 pixels that contains your branding.
2. Go to the templates folder under the Presenter 8 installation folder
3. Add your custom logo.swf file to the Templates folder.
4. In PowerPoint, publish the presentation to your computer.
5. View the output to see the new logo.
6. this logo will appear every time you publish any presentation
If you want to replace the logo in already published presentation
1. Create a new file named logo.swf of dimension 47 x 27 pixels that contains your branding.
2. Go to the publiahed folder >> data >> resources and paste the logo here
3. Go to the data folder and open vconfig.xml
4. Search for <uireplace name="logo" value=""/>
5. make value equal to "resources/logo.swf" and save vconfig.xml
6. Launch viewer.swf
The above mentioned steps replaces the adobe logo in the player.
If you want to replace the Adobe presenter logo in the loading screen
1. Open the published output folder
2. Open the vconfig.xml file in the data folder in Notepad. Search for <language id=”en”> section, and then look for <uitext name="ADOBE_PRESENTER" value="Insert Your Custom Text"/>
3. Replace the "Insert your custom text" with your company name
4. Save and close the vconfig.xml file.
5. Launch the published output
Hope this helps
Thanks
Mahesh
Message was edited by: mkalyanp

How can i create a simple netweaver portal page that shows text and images?

Hi,
i have a simple question or maybe it's not so simple.
I am completly new to SAP Netweaver 2004s Portal. At the moment i'm trying to understand the struture of the whole thing. I already know how to create roles, worksets and pages and i know how to combine the different elements so a user can acces them.
And now i want to create a simple portal page that shows text and images. Is it possible to create such a simple page with the portal content studio? What iView do i have to use?
(I just want to create a start page with a welcome text on it.)

Marc
Considering that you would any ways go ahead with complex development from this simple start page I recommend create a Web dynpro Iview for your start page (include the Iview in your page).
For putting the contents use Netweaver Developer studio to build a simple start page application and put your static text on that Iview.
Please go through the following log after your NWDS development is over - This will make you comfortable for further challenging work.
http://help.sap.com/saphelp_erp2005/helpdata/en/b7/ca934257a5c96ae10000000a155106/frameset.htm
Do reward points if this helps and let me know of you want anything more.

I ... Acrobat.... (sometimes, when I need to print PDF with text and image)

First of all, I want to let Adobe know that you are a immens castle that is almost impossible to communicate with!
I just want a simple question to be answered: I want to print a document which beholds text AND an image.
If I print it, the image is NOT on the print (MacBook and iMac Yosemite)
If I print it form my iPhone (6), the image is on the print.
How can I fix it?

You report your problem as using Acrobat on a Mac. You've posted in the Reader forum for iOS.
I've moved your question to the Creating, Editing and Exporting PDF forum which seems more appropriate.
You'll need to provide more information for us to be able to help you.

Best-practice for use of object styles to manage image text wrap issues when aiming at both print and EPUB output?

I have a work-flow question about object styles, text-wrap, and preparing a long document with lots of images for dual print/EPUB output in InDesign CC 2014.
I am sort of experienced with InDesign but new to EPUB export. I have hundreds of pages and hundreds of images so I'd like to make my EPUB learning curve, in particular, less painful.
Let me talk you through what I'm planning and you tell me if it's stupid.
It's kind of a storybook-look I'm going for. Single column of text (6" by 9" page) with lots of small-to-medium images on the page (one or two images per page), and the text flowing around, sometimes right, sometimes left. Sometimes around the bounding box, sometimes following the edges of the images. So in each case I'm looking to tweak image size and placement and wrap settings so that the image is as close to the relevant text as possible and the layout isn't all wonky. Lovely print page the goal. Lots of fussy trade-offs and deciding what looks best. Inevitably, this will entail local overrides of paragraph styles. So what I want to do, I guess, is get the images as closely placed as possible, before I do any of that overriding. Then I divide my production line.
1) I set aside the uniformly-styled doc for later EPUB export. (This is wise, right? Start for EPUB export with a doc with pristine styles?)
2) With the EPUB-bound version set aside, I finish preparing the print side, making all my little tweaks. So many pages, so many images. So many little nudges. If I go back and nudge something at the beginning everything shifts a little. It's broken up into lots of separate stories, but still ... there is no way to make this non-tedious. But what is best practice? I'm basically just doing it by hand, eyeballing it and dropping an inline anchor to some close bit of text in case of some storm, i.e. if there's a major text change my image will still be almost where it belongs. Try to get the early bits right so that I don't have to go back and change them and then mess up stuff later. Object styles don't really help me with that. Do they? I haven't found a good use for them at this stage (Obviously if I had to draw a pink line around each image, or whatever, I'd use object styles for that.)
Now let me shift back to EPUB. Clearly I need object styles to prepare for export. I'm planning to make a left float style and a right float style and a couple of others for other cases. And I'm basically going to go through the whole doc selecting each image and styling it in whatever way seems likeliest. At this point I will change the inline anchors to above line or custom, since I'm told EPUB doesn't like the inline ones.
I guess maybe it comes down to this. I realize I have to use object styles for images for EPUB, but for print, manual placement - to make it look just right - and an inline anchor seems best? I sort of feel like if I'm going to bother to use object styles for EPUB I should also use them for print, but maybe that's just not necessary? It feels inefficient to make so many inline anchors and then trade them for a custom thing just for EPUB. But two different outputs means two different workflows. Sometimes you just have to do it twice.
Does this make sense? What am I missing, before I waste dozens of hours doing it wrong?

I've moved your question to the InDesign EPUB forum for best results.

Is the BSP extension better than this solution(Text and Image in Button)?

Hi guys,
I have a concept question to decide whether a BSP extension is needed.
I want to put text and image in htmlb button, and used the solution like below:
<%
data image type ref to cl_htmlb_image.
data: image_string type string.
create object image.
image->id = 'back'.
image->src = cl_bsp_mimes=>sap_icon( id = '@9S@' ).
image->tooltip = 'Go back'.
clear image_string.
image_string = image->IF_BSP_BEE~RENDER_TO_STRING( page_context ).
        %>
        <xhtmlb:toolbarButton id      = "back"
                              onClick = "back"
                              text    = "<%= image_string %>" />
But this solution is not desired by customer, since they don't think it looks nice. So is it possible to create my own BSP extension to get a nicer element?
Thanks for any hint.
Regards,
Liying

Hi,
By a nicer element...did you mean to display a better image...or a nicer image ????
if yes, the you can upload any image you need and then use it here...
Tell me if you need more information...!!
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

Resizing text and images with actions and keeping it resized for the next slides, how to?

Hello everybody,
I searched over the net and in this support section for a solution to my problem, but i didnt find any, so...here I am asking you experts.
Through a particular use of different actions I make a logo "compose" in the first slide of my presentation (the logo is composed by text and images that interact), then in the second slide i make it resize so it goes 50% of its size and moves down like a TV logo, in the corner of the slide, and I want it to stay there for all the lenght of the presentation.
It might be a stupid problem, but I didnt understand how to keep it there, 50% of its size and always in that position. If i duplicate the slide I obviously duplicate the 100%-size-logo, not its 50%-size-version, and if i shrink it in order to make it be 50% of its size the text size doesnt shrink so i have to change the text size manually, but the visual effect is imperfect.
Lets summarize:
slide 1: text appears, image appears, the text and the image move and "compose" the logo
slide 2: the complete logo reduces its size to 50% and moves in the lower corner of the presentation, in the place I want it to be for, lets say, 20 slides
slide 3: i want to have this logo already reduced in size and in its position, in the right lower corner, but if i try to group the different parts of the composed logo and i try to squeeze them the font doesnt change its size, I only squeeze the area that the text occupies.
Some help please guys?
Thanks in advance,
Dom-
(add: the problem is kind of similar to this: https://discussions.apple.com/message/9179367#9179367 . the idea of making a slide that contains the logo and text in the exact positions they would be after the move and scale actions is good and that was my first attempt, the probem is that it looks impossible to me to create a second "little" version of the logo that looks exactly the same of the first one that i reduced, so i hope there is some way to tell the app to use "the first logo, only resized the way i want", and thats the point where the problem with the size of the text comes out)

Hi pritam,
The “maintain proportions of window for different monitor
resolutions” property will maintain the proportional size of the front panel
(its x and y sizes) when opened in a different resolution. The front panel
objects will not be resized and will appear larger (and may not fit inside the
front panel) when saved in a higher resolution, and moved to a lower
resolution. You can use the “Keep window proportions” property to achieve the
same results.
To have both the front panel dimensions and front panel
controls scale, you need to have both the above property and the “scale all
objects on front panel as the window resizes” selected. The labels will not be
resized by this.
I tried using both properties on two monitors and noticed
that the change does not occur when the resolutions between the monitors are
different. I had to lower both monitors’ resolution to see the change work
properly.
Please post back if you have any questions. Have a great day!
Ryan D.
District Sales Manager for Boston & Northern New England
National Instruments

Paste selected text AND images from a webpage to Pages/Word?

I'm a new Mac user (also running virtual Windows XP via vmware fusion), and I know next to nothing about my Mac. Please bear with me if this is something that has been answered (I looked, but didn't find a specific answer for my question...it may be here, but I can't find it).
On a Windows-based PC, all I need to do is select, copy, then paste into a Word document. All text and images would paste. I can't seem to figure out how to do that in Pages or Word (have MS Office for Mac, too).
Thanks for any help.

I suppose I was hoping I could do on my Mac, what I did on my Dell...that doesn't appear to be the case.
Specifically, I'm talking about clicking/dragging to select what I want (including images), opening a Word document then pasting everying, including ALL selected images. More specifically, at sites with game walkthroughs. I prefer to save them to a document and refer to them offline, if I need to. I actually tried it at 2 different sites (one that hosts their own images and one that does not), with the same results.
While I was waiting for a response (thank you, so much, by the way), I tried again and actually managed to get the first 3 images (of 60+) to paste into Word. There were blank places in Word, but the invisible images were clickable. In Pages, only the text pasted.
Tried it every which way, but Sunday, LOL, and nothing worked. If it can't be done on my Mac, then I'll just keep using my Dell (I knew there was a reason I decided to keep it) for that sort of thing and then email them to myself...or try installing my MS Office '07 under virtual Windows.
Thanks, again.

Problems with moving images, widgets and text.

Apologies if this question has already been asked. I think there has been a similar question asked but can't see a solution and I'm not sure if my problem is slightly different.
I have been designing a Muse website on a MacBook Pro, and placing widgets, text and images where they look correct in 'design' mode, but when viewing online, some items do not remain the same size and/or have moved. When viewing on a larger screen, such as an iMac, the positioning and sizing is even worse.
I can't figure out how to lock / maintain the correct sizing and positioning of items such as a 'youtube' video, text boxes and graphics in general as they appear in design mode.
I'd be VERY grateful if someone more experienced could advice how to avoid items changing when viewing on different sized screens.
Please see the difference between the appearance on a MacBook and iMac to better show what I am hoping to resolve.
Thank you in advance.

When I try to move a stack between two stacks, it becomes part of the other stack. The black line is highlighted.
I want to organize my stacks so the best are at the top of the grid.
Thanks for any help.

Reading text and charachters from image

Hi,
Is there anyone that could share code to extract/collect text from images? I've tried nConvert and gocr but its not working very well (also its external programs). I would be extremley grateful if someone could share som code to parse the texts and numbers from an image.
Thanks in advance!
BR

To answer your question - I'm teaching myself java and I haven't covered enumeration classes yet.
With the setGender("Q") scenario, the data in the text file has already been validated by other methods before being written to the file. Anyway I worked out my problems were caused by "input = read.readLine()" being in the wrong places. The code below works fine though I've left out the set and get methods for the time being.
Chris
public static void readFile()throws IOException{
String name = "";
String gender = "";
int age = 0;
BufferedReader read = new BufferedReader(new FileReader("myfile.txt"));
String input = read.readLine();
while(input != null){
name = input;
input = read.readLine();
gender = input;
input = read.readLine();
age = Integer.parseInt(input);
input = read.readLine();
System.out.println("Name: " + name + " Gender: " + gender + " Age: " + age);
read.close();

Images gone replaced by a large 'x' and a question mark

Have been working on my iBook and, after clicking a now forgotten dialogue box, all the images have disappeared, replaced with a large X where the image was and a tiny question mark inside. No 'undo' or 'revert to' seems to help return to what was there just a moment ago.
Is there a simple fix to this?
Is there a way of going into the root of iBooksAuthor to reconnect the images?

This is a perenial problem, and a search of the discussions will bring up many different solutions.
Try reducing the size of any image or text box and bringing each in turn to the front ( Arrange>Move to Front)
At the moment everything is still on the page, so do not delete anything. Also did you add a full screen background image and not lock it.
Read some posts and try each solution found.

Images, text and iViews question?

Similar Messages

Maybe you are looking for