Images turn green in LR2

Several months ago one of the images in a folder turned green when I selected it. I always import files as digital negatives and then create a virtual copy to develop. In this case both the copy and original turned green. Going to the develop mode I saw that the white balance sliders had both moved to the extreme left, but all other settings were unchanged. Resetting did nothing so I manually adjusted the white balance to, what I thought was the "as shot" position, hoping this was a one off event.
All was fine until a few days ago when, as I expanded each dng/copy stack the dng file turned green. The techies at Adobe have been very helpful but unable to find a solution yet. The latest attempt has involved checking the develop history of images in case a preset was accidentally applied to all images, but this has proved unsuccessful. It's possible that, if this was the case, the offending image has been deleted along with its history which cannot then be reversed.
I've also tried uninstalling and then reinstalling L2 and opening it with an earlier uncorrupted file but the images still turn green. Suspecting a virus, I contacted support for my AVG anti-virus product, but they were unaware of any viruses which exclusively target image files and considered that scenario unlikely.
Has anyone else experienced this problem, and been able to rectify it? Three years of photos involved so any suggestions would be well received!

If resetting the image doesn't put white balance back to default As Shot it would suggest that you have somehow saved a new Camera Default. You can do this on a camera model, serial number or even specific ISO value, so it might only apply to a small number of images. Anyway, to check that this isn't the case you should select one of the affected images, switch to Develop module then choose Set Default Settings from Develop menu. You'll want to choose the Restore Adobe Default Settings button. Finally, select all of the affected images and hit the reset button. Remember, to expand all stacks before resetting or only the top image will be reset.

Similar Messages

  • Nikon D70s images turn green

    i found a very strange behaviour in A3 - when "reprocessing" old Nikon D70s Raw files, they turn green'ish. both the preview as well as the thumbnails. this happens with every D70s Nef file.
    once i quit and restart A3, they are rendered correctly.
    this only happens to these old nef files, all newer files (from D300, D3 and D3x) work fine.
    any ideas?

    You are not the only one! All my pictures from D700 turn green too....
    have a look at :
    http://discussions.apple.com/thread.jspa?threadID=2330296&start=30&tstart=0
    Some people have find a clue in deleting the plist files in the Library/application support/aperture... It didn't work for me.

  • Would anyone know why some of my downloaded images turn black and green when I tap to look at them?

    Would anyone know why some of my downloaded images turn black and green when I tap to look at them?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup

  • External screen turns green?

    I've had this setup for a while now.. A 12 inch PB with a CRT 17 inch monitor connected to the PB through the "mini dvi to vga" adapter..
    Now this is the problem: since a few days the image on my external screen is green.. It's not totally green, i can see pictures and programs but it's like the color balance isn't right.
    First I tried to change this through display calibration -> didnt help
    Then i tried to manually adjust the color balance through the screen display settings -> didn't help..
    So I thought my crt monitor was broken. But then I connected my PB to another external screen trough my "mini dvi to vga" adapter. And I had the same green screen. Then I knew it wasn't my crt monitor that was broken but it had something to do with my output signal..
    Fortunately a friend of mine has a nice 20 inch tft display. I tested the connection again with the "mini dvi to vga" adapter and got the same green screen. But then I connected my PB to his 20 inch screen through a "mini dvi to dvi" adapter and the green was gone! So it couldn't be the output singal of my PB..
    So i figured my "mini dvi to vga" adapter must not work properly somehow. I don't know how it could have broken. It happened just like that. I turned off my PB, and when I turned it back on the external screen turned green. I didn't do anything weird with it..
    Could this be? That the adapter is broken? Or do you guys think there might be something wrong with the output signal after all?
    Anyone encountered something similar?

    So I went to an apple store today, and explained them my problem. We tried a new "mini-dvi to vga" adapter but still the external screen was green!! Also, when using my adapter that I supposed was broken on another PB the output singal was perfect! So as it turns out, it's my PB thats not working properly..
    The guys at the store said it must be somthing with the motherboard.. I just don't think I can miss my PB for more than a few days!! :P

  • When using Firefox certain videos play but the image is green and distorted.. help?

    Firefox 3.6.8 and 3.5 (I downgraded to see if that would solve the issue)
    Windows 7
    Intel Core i5
    Flash Player: WIN 10,1,53,64
    When using Firefox certain videos play but the image is green and distorted. The image turns into lines and sometimes it half of the screen of the video. Examples are streaming MLB.tv video and some vimeo videos. The odd thing is that it isn’t all Vimeo videos. Is this a flash issue?
    The issue does not happen with Internet Explorer which leads me to believe this is an issue with Firefox. I downgraded to 3.5 and the issue still persists.
    Screen Caps: http://yfrog.com/1x46496103j and http://yfrog.com/n112309689j
    Any help?
    == URL of affected sites ==
    http://

    Try disabling hardware acceleration in your [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash settings] (using Firefox, right-click on any Flash object on a webpage, select Settings, uncheck "Enable hardware acceleration on the Display tab).
    Ref:
    http://kb.mozillazine.org/Flash#Performance_or_display_issues_with_certain_Flash_videos

  • Apple menu apple turns green on hang?

    My Mac has become incredibly unstable lately. I can't seem to go a full day without requiring a hard shutdown. An application will hang (iTunes, Safari, Mail, anything) and while I still retain cursor control, all I get is a spinning beach ball. The Force Quit window will not even come up. My only options are hard shutdown via power button, or SSH into the iMac and shutdown via CLI.
    During this time, I noticed that the apple in the Apple Menu turns green, at least some of the time. Has anyone else experienced this?

    actually today i had not a green but yellow apple appear in a system that seemed to be hanging and this is why i've been reading discussions today.
    i had let the battery run down overnight to calibrate. while i wrote down what happened i'm not sure i have all this in the proper order but the battery indicated it was on reserve power (i THINK i had already attached the power cord as i assumed the computer was totally asleep....no sleep light pulsing...
    i am confused as to the steps i took and what happened (despite my notes immediately thereafter) but basically these things happened: i had to restart the computer and when i did the first gray screen instead of showing a wheel had a horizontal bar with smaller bars moving across left to right (as if loading) then a blue screen briefly and then my desktop and on this desktop the apple icon was YELLOW....i couldn't get the airport to engage and went over to the apple to restart the computer at which point a transparent box appeared in the area of the apple icon and in it were small black marks that i associate with computer language...or whatever). i couldn't get the menu to appear below the apple icon but was able to bring up the dialogue box by using the apple, option and escape keys but instead of force quit as an option only relaunch was offered but that would not work and in fact the transparent box that had been at the apple icon now was over this dialogue box. i believe at this point i shut the whole system off with the power key and waited a minute or few, came back and started up again and now everything went as usual on start up including the return of the black apple that 10.5.2 seems to have. i believe i also saw a blue apple in there briefly at some point or maybe it was green but another than the yellow but it more flashed than stayed.
    so not quite what you had but something mysterious in any case just so you know you are not totally alone. if anyone has any idea as to what this yellow apple is about and what went wrong on this calibration journey i'd love to hear....also as to what the other oddities are about....the transparent code box breaking through over the desktop image!! that's scarey!!!

  • Pictures turning green when uploading to website or dropbox after edited in Pscs5

    I am having issues when Uploading photos to my website,dropbox,email or online lab after editing in photoshop , First I edit in LR5 then export to PS with Lightroom default settings and my adjustments made to photos and then in do minor adjustments in Photoshop cs5 and then save in jpeg, well when I go to upload to my website or the others mentioned, the photos tuen green and desaturate and I am not sure why but need to fix this really bad, They do not turn green however when uploading to the blog...please help..:) GOD Bless you

    What software (programs) are in charge of displaying the images you are comparing? Are you comparing the images on the same monitor and computer?
    Different software may display the same image differently depending how it is color managed and if it can be color managed at all. Different monitors, computers, devices, outputs and etc, display the same color differently. The color management was designed to achieve consistent colors as much as possible on different outputs, but on each end this requires software and equipment with color management capabilities and users who know how to use correctly color managed images.
    Having the above limitations in mind, can you please explain what are you trying to achieve?

  • IPhoto 08 - my photos turn green

    After importing and editing some photos, they turn green. Just about any editing will do it, ie: cropping, adjusting, etc. It doesn't always do it.
    I can revert to the RAW original, but I've lost all the changes and even if I try again, they are still green.
    They look like the original in the thumbnail, but when I open a pic, it turns green. It actually expands in the original, but quickly turns faded and green as if an opaque green film has been placed over it.
    If I mess with it too much, I lose the picture and get an exclamation mark where it used to be.
    I am using iPhoto '08 with a Nikon D40X. I have the image set as RAW (which gives me a .NEF suffix)
    Any ideas?
    Barry

    I have no idea what's happening to your iPhoto.
    The result was 189 events
    So, is this more or less than you had before? How are we supposed to know?
    ... with unrelated photos
    unrelated to what?
    The photos were dated, but not always from that date.
    So, the photos were dated incorrectly? Or they were dated correctly but in the wrong Events?
    No library except the original library.
    If you used the Rebuild command in iPhoto Library Manager then there are two libraries. Or do you mean in the iPhoto Window? If so, under Library there are two headings: Events and Photos. Are you saying they are not there?
    Regards
    TD

  • I have a 1st Gen Time Capsule 1tb. It turns on, boots up and turns green for 5-10 mins, but then turns solid orange and then blinks orange.  I have removed the hard drive and replaced the power supply . . . still the same problem.  Suggestions?

    I purchased a used 1st Gen Time Capsule with a 1 tb hard drive.
    When I plugged it in and did the initial setup, it worked fine, but gave me a hard drive error.  A few minutes later the green light turned solid orange, then blinking orange, then the status light went off.  The lights in back stayed on. 
    I removed the hard drive and rebooted, it turned green for 5-10 minutes then reverted back to a solid orange, blinking orange, then went off.
    Next I purchased a remanufactured internal power supply, and installed it (without the hard drive in).  It turned green almost immediately.  After about 15-20 minutes, I decided to try to install the hard drive again, booted it up, and tried to erase the hard drive with was working properly according to the software.  It stopped erasing the disc after about 20 minutes and turned solid orange again, then blinking, then no status light  (but back lights were still lit).
    I'm a bit flabbergasted at this point, any suggestions on what to do next?  I think i've pretty much replaced everything except the logic board, but can't seem to find any information on the symptoms of a logic board malfunction. 
    Thanks!!!!!!!

    A Gen3 is identical board to a Gen4 although they have some differences in firmware and wireless card was updated on every model.. but a Gen3 is substantially faster than Gen1, Gen2 which also have identical boards.
    You can with careful shopping get a Gen3 pretty cheap.
    Most use a delta power supply which I think is a lot better than the flextronics used in most Gen1/2
    You can sell back the parts to ebay.. people still would buy the power supply etc. Even just the case can be useful to a repairer.
    But if the board is gone.. it is hard to repair.. not impossible.. but hard.
    Gen 3 and Gen 4 are not without faults.
    See this page.
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
    I have fixed it a different way.. by using the small converters you can buy in bulk from ebay for $1 each.. KIS3R33 .. they produce 3.3V at 2A peaking at 3A.. amazing.. I keep using them to replace onboard power converters by removing the inductor and simply power directly.. the end result has worked great. You can simply change the resistors around and get any output from 1v to 20v depending on input.
    Is it worth doing it .. no of course not.. it will waste many more hours than $50 is worth.. but it is kind of fun that you can actually make things work again.
    Here is a pic of the Gen 3 totally powered by me. All onboard power removed.
    This was to track down the fault in the Gen3.. but I am kind of pleased that it ended up neat enough and reliable enough to work for more than a year.. the Gen3 still serves as a way to get Netflix via network for a friend running 24/7.
    The units supply (from left to right)
    1v, 1.1v, 3.3v, 5v, 1.8v
    It is feed by 12v supply which is also directly connected to the hard disk.
    So it is possible to fix.. !! Only got to be a bit crazy.

  • POP-UP AD ISSUES whenever I access a new Safari page/tab. The usual blue links have turned green with a double underline. Safari is now annoying the S**T out of me, please help.

    Was trying to download a torrent app and somehow accidentally installed an app that allows pop up windows to appear whenever I open a new window or tab in Safari. The usual blue links have all turned green with a double underline and whenever I hover nearby them, ads relevant to the words of the link pop up. Whenever I look at online stores like Mr. Porter, there are pop up icons saying "MORE" that link to supposedly similar products. Can anyone help me remove this problem? I've updated to the latest Mavericks, hence Safari was updated, I've deleted the app that I thought was the issue, I've disabled cookies and pop ups and I've also increased my firewall security, but to no avail. With my minimal knowledge of anything other than the day to day running of my laptop, I'm not really sure what's going on here....

    See the section : How to open an app from a unidentified developer and exempt it from Gatekeeper at
    OS X: About Gatekeeper
    You just Ctrl-click it & choose 'Open' assuming that you do wish to trust it.

  • Entire image turns black when using the type tool in Photoshop CC

    When I create a text layer, the whole image turns black.  If I enter the text blindly, I will see the expected results when I finish and click on another tool.  If I try to edit the text layer, everything turns black again.  I am not using the type mask tool.  I can select and move the layer and I can blend the layer; I just can't see what I am typing.
    Using Windows 8

    I had the same problem and the update of the video card driver did not help - only after changing the settings in photoshop under "Preferences >> Performance >> Advanced settings >> Basic" the problem was solved

  • I started making a movie and all was well. I added a few more pictures and some sound and played it back. It plays so far and then the pictures break up into colors and then the screen turns green.  The sound continues.

    I am making a movie from still pictures. I used no theme and then started adding pictues. When I played it back, all was well. Then I added a few more pictures and some sound. When I play iot back it plays just so far and then the sound continues, but the screen turns green or the pictures break up into colors.

    Sorry, everyone.  I think I may have figured out what it was all down to...........
    I had left the IDE ribbon cable plugged into my third HDD, with the power cable unplugged.  I did this so as not to endanger my years of work on the third drive, until Windows had setup.  I have in the past, accidentally chosen the wrong partiton to format, so this seemed a good way to avoid it from then on.
    This was not a problem on my old system, but it seems this system doesn't like it.
    I must have left the drive completely unplugged, the times Windows did setup.  Amazing really.  I couldn't see the woods for the trees.
    Anyway, I'm sorry to have bothered everyone with my problem.
    Cheers
    Marcus
    edit :   Sorry Syar2003, I didn't see your reply until I had posted mine.  Many thanks for taking the time to try and help me, it seems as though I may have sorted it now.  I am using IDE drives until I can afford SATA.  But many thanks for the heads-up on the NF4-SATA compliance, I'll be sure to bare that in mind.
    I didn't actually check the NVRAID/IDE ROM version before updating the bios, so I have no idea if the revision was changed when Liveupdate flashed the Bios, I'm afraid.  I didn't know they would be updated at the same time.
    Again, cheers
    Marcus

  • When I open Firefox, the background of the icon on the bottom of my screen turns green on the left side.

    When I open Firefox, the background of the icon on the bottom of my screen turns green on the left side.

    If you want to remove saved form data from a drop down list then use these steps:
    #Click the (empty) input field on the web page to open the drop down list
    #Highlight an entry in the drop down list
    #Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    See also Clear Recent History
    *https://support.mozilla.org/kb/Clear+Recent+History

  • Whenever i try to watch one of my downloaded tv shows or movies the screen turns green and i can only hear audio

    when i try to watch a downloaded movie or tv show the screen turns green and only audio plays

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forum.
    Regards.

  • After downloading an app and later trying to open the app, the iPad screen turns green and nothing happens

    After downloading an app, then later trying to open it again, the iPad screen turns green and nothing happens.  How can I fix this?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>iTunes and App Stores and sifnout and sign back in
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

Maybe you are looking for