Images When Converting InDesign CS5.5 using Kindle plugin

Hi,
I've been reading, looking for a solution to an image conversion problem. If I create and place an image in Illustrator (for example combining a car drawing and the sun-2 items in one drawing), then export an ePub, convert for Kindle to mobi using the Kindle plugin or Calibre, I am getting the second item (in this case the sun) below the car instead of where it should be. I've tried every conceiveable variation: re-did the image in Fireworks as a PNG, re-saved into jpeg, used the AI image directly, etc. I've unzipped the ePub, but can see no way to fix the car-sun problem.
original as placed in InDesign project converted version
Any help with this image problem much appreciated. (Wish: CS6 InDesign exports for mobi).
Regards,

Hi,
I didn't combine in the above image in InDesign. The car was a PNG to which I added a star drawing: probably tried it in Fireworks and Illustrator. But, not using InDesign (no star shape tool for the sun).
(However, I originally did combine the 2 separate images (car and sun) in my first attempt in InDesign, which produced the same result. When it converted poorly, I then deleted the 2 images from InDesign and placed a single combined image-probably imported the car PNG into Illustrator/Fireworks and drew the sun, then exported the combined and placed. The combined, see above, still converts with the same problematic result. Is it possible that although the initial 2 images were deleted in InDesign and replaced, and a re-export was done of the newly saved file, somehow InDesign is caching these 2 images?)
The InDesign PDF export's image, like in the ePub, is fine.
Puzzling result for the conversion.

Similar Messages

Why does all alphabets change to capital when converting pdf to word using Adobe Acrobat XI

Why does all alphabets change to capital when converting pdf to word using Adobe Acrobat XI

Word 2013 uses its own pdf creator engine as far as I know. The step I performed were:
1 - In the save settings I told word to embed fonts (sorry for the language, I have the Italian client)
2 - Export from Word -> Save As -> .pdf adding also the table of contents/index
N.B. I cannot use PDF/A, and in any case it doesn't embed the font
A working solution is to use Acrobat XI to convert it or print with Adobe PDF printer, results:
The problems are 2:
1 - It doesn't create any bookmark and doesn't create links from the table of images to the linked images
2 - Images, also with the preset "High Quality Printing" customized using "No compression", are really ugly and if you zoom a bit more than 100% they totally be s**t. It wasn't that way with PDF created by word.
In the end, or I find they way to open the pdf created by word and embedd the missing font, or I find a way to make Acrobat XI creating bookmarks from the word file.
Suggestion?

Hi how to convert Indesign CS5 file to Indesign CS4 version

Hi Iam Rajesh
Hi how to convert Indesign CS5 file to Indesign CS4 version, please tell me
thanks
best regards
Rajesh

Try this:
http://ajarproductions.com/pages/products/in5/
Bob

How do I update InDesign CS5 to get new plugins or Get a CS5.5 update.

How do I update InDesign CS5 to get new plugins or Get a CS5.5 update.

You probably don't. CS5.5 was a paid upgrade, not free, and it is no longer distributed by Adobe or resellers.

Get wrong bookmark levels when converting Word to PDF using Acrobat 7.0

I am using MS Word 2003, Windows XP and Adobe Acrobat 7.0.
When converting a DOC to PDF, all features are perfect except the bookmarks are located at the wrong level, i.e., the first chapter "Introduction" is the first level, which is desired; but the second chapter and the later will be placed as the subitems of the first one. This is a severe problem for me for I need a very accurate convertion.
P.S. I set the convertion level of bookmarks correctly before the convertion.
So I wonder if there is any solution relating to the settings of Word or Acrobat.
I am using Acrobat 7 because the later versions(8.0 etc.) has the running header problem. If 7.0 is also problematic. I don't know which version can do a perfect conversion.

Thank you for your answer Lori. I 've checked all the desired options and have done the conversion in Acrobat 8.0 and got right levels(but that one got problematic running headers). So i think this may be the problem of acrobat 7.0. I will try the other updated versions to see if there is any improvement.

This is possible in InDesign CS5.5 using Folio Builder (DPS).

Hi DPS Experts,
I am new to this DPS work flow.
I am using InDesign CS5.5. I have the question? This is possible to create the apps for the below mentioned web link.
http://www.spanish-real-estate.co.uk/
The website is in joomla and the domain is www.spanish-real-estate.co.uk
The app will be free so I am not sure if this will need apple store approval.
If it possible please any one help to or guide how to I start the process how to uploaded the files in DPS and how to check it out the video and audio and everthing like in the website to be embeded in the iPad Apps.
Please give the path to achieve this goal.
thx,
csm_phil

Out of curiosity, why do you want your app to look like the actual website?
And Yes every app goes through an approval process before it appears in the app store.

How to cancel rounding value check when convert pr to po use me59n or me59

hello every one,
        I have a requisition that,customer want to cancel rounding value check when converting purchase requisition to purchase order use me59n or me59,but they want keep the function of check rounding value when create purchase requisition as mrp run.
        does anyone happen to meet samiler question?Is there any way to solve it?
        thanks
Edited by: p y on Aug 3, 2010 5:14 AM
Edited by: p y on Aug 3, 2010 10:07 AM
Edited by: p y on Aug 3, 2010 10:56 AM
Edited by: p y on Aug 3, 2010 10:57 AM

what do you think based on what SAP should know whether it has to do rounding or not?
Why should SAP not round if a rounding rule is entered?
when a human is converting the PR to a PO, then a warning message is issued, if the user then enters the old quantity again, SAP accepts it.
A background program cannot do such decisions, it has to rely on given master data.

How to cancel rounding value check when convert pr to po use me59n

dear all,
I have a requisition that,customer want to cancel rounding value check when converts pruchase requisition to purchase order use
t-code me59n,but they want keep the rounding value check when create purchase requisition when mrp running.i look up enhancement for this function,but didn't find any.so has any one can tell me a way to solve this question?
thanks a lot!
Edited by: p y on Aug 3, 2010 10:08 AM
Edited by: p y on Aug 3, 2010 10:10 AM
Edited by: p y on Aug 3, 2010 10:57 AM

does anyone know it?

Set different PO type when convert PR to PO using ME59N

Hi SAP,
This process is for third Party Sales Order, PR will be created after Third party Sales order is save, Then i use ME59N to convert the PR into PO. the problem is, The PR order type is "NB", when convert the PR into PO it will carry PR Order type NB for PO order type, how do i change the PO order type from "NB" to others ?

Hi,
Refer OSS note : 1361265
You can use the implementation of the BAdI ME_BSART_DET to adjust document type determination according to your requirements.
The attached sample implementation ensures that the document types that are maintained for EA-DFPS are always found in transactions ME59N and /ISDFPS/PRPLD.
If this sample does not meet your requirements, adjust the source code according to your requirements.
Proceed as follows:
Call transaction SE19 (BAdI Builder: Initial Screen for Implementations).
In the "Create Implementation" section, select "Classic BAdI", enter the BAdI name "ME_BSART_DET", and choose "Create Impl.".
Enter an implementation name, for example, ZISDFPS_ME_BSART_DET.
Confirm the customer namespace information and on the next screen, enter your own short text for the implementation.
Save and activate the BAdI implementation.
The implementing class is also specified on the "Interface" tab page.
Double-click to navigate to this class. Implement the method IF_EX_ME_BSART_DET~BSART_DETERMINE as described in the correction instructions.
Regards,
Ram

Appcrash when closing Indesign CS5 and CS6

Hello,
Whenever a particular user closes Indesign CS5/6 with a file opened, the following appcrash appears. If there are no files open, and the client is opened, the crash does not happen when you close it.
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             InDesign.exe
Application Version:                           7.0.4.553
Application Timestamp:                     4d890440
Fault Module Name:                          Public.dll
Fault Module Version:                        7.0.4.553
Fault Module Timestamp:                  4d8903ca
Exception Code:                                  c0000005
Exception Offset:                                00177873
OS Version:                                          6.1.7601.2.1.0.256.4
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I've tried uninstalling, reinstalling CS5 - with updates, as well setting preferences back to default.
Any recommendations to resolve this issue would be great. Thanks!

I suppose the obvious solution is train users to close files before they close the application.
All kidding aside, the user test says it's either a damaged installation, or a system configuration/software conflict issue. Reinstalling might fix it if it's a damaged install, but won't help for configuationor software conflict. Unfortunately, Windows crash logs are pretty useless as far as diagnosing something like this, so it comes down to best guess and trial and error. You might want to turn off stuff in MSConfig and see if the crashing stops.

Blue screen when installing indesign cs5

I am trying to install the trial version of indesign CS5. When it gets half way I get a blue sceen and Windows shuts down. Anyone any ideas on what I can check to stop this?
Ian

Yes Peter It seems to happen as the help files are loading.
It gives an error report which says that it will send next time
I connect to the internet--however it doesn't seem to do this.
Ian

Grainy Image when converting from PAL to NTSC...

Hi,
I'm using Compressor 2.0.1 to convert a PAL movie to NTSC. I find that the output is extremely Grainy, the blacs are Muddy and the Highlights are colored.
Any suggestions?
Thanks and Regards,
Rajnesh

There are many options when converting from PAL to NTSC with Compressor's Frame Controls panel. Have you tried other settings? Note, however, that the highest quality settings are pretty slow so be prepared for a fairly long wait even on your Power Mac G5.
Otherwise, you might want to try the freeware utility JES Deinterlacer (available on VersionTracker.com). JES Deinterlacer is pretty fast at PAL <-> NTSC conversion and the results are better than you will get with the basic settings in Compressor 2.

Error 5 when installing Indesign CS5

trying to install my adobe suite 5 indesign and it keeps giving me a error 5 and will not open. help.

Please refer to steps in ;
InDesign CS5 Error Code 5
ID CS5 error code 5 scarred: go back to CS3
Please let us know if it worked.
Regards
Rajshree

Using Transparent Photoshop images placed into Indesign CS5

Placed a transparent photoshop image with clean/beautifully sharp mask inside my Indesign design.
Added a drop shadow with Indesign and gave plenty of space with the outside frame thingy.
However when I export the PDF my round image mask shows a blunt ugly edge on my perfectly round masked circle. The photoshop image is perfectly round... How come Indesign blunts the right edge?
The image is not being clipped by the frame, I have given it plenty of space. This seems to be a CS5 issue as my coworkers who have similar file setups on their CS4 files get no circle blunting! We just got the proofs back today and is not just a quirk of the pdf rendering on our screens.
Thanks!

Ah, says I'm using acrobat 5 compatibility setting. My flattener options seem to be greyed out at PMrip ?
Does this look like it should?

Illustator Image placed in InDesign CS5 moving position when Exporting to PDF

I have a Illustrator image placed on a master page and when I go to export to a PDF the image moves to the left about 2 inches.
The same image on another master page outputs correctly.
I copied and pasted it from the page that is working correctly to this master page, but it still moves.
Any ideas?
Thanks

Are you fully patched?
Can you make this happen with a fresh file and different graphic?
Tried the fix corrupt files by expoting to inx or idml?
http://forums.adobe.com/thread/526991

Images When Converting InDesign CS5.5 using Kindle plugin

Similar Messages

Maybe you are looking for