Images wont post
I found the TLF component in .net magazine issue 190. I went through the tutorial and everything went smooth execpt for adding images. After I insert the images and select send to stage, the images get deleted out of the editor and the stage doesn't update. I do have the component selected on the stage that I want to apply the images to. Any ideas?
thanks
Relative paths can be used but can be tricky.
Regarding issues with images. We are not enhancing or fixing the CS4 plugin. I think the best thing to do at this time is get the latest TLF swcs as bundled in Flex Gumbo from the opensource page and code directly in ActionScript. The textLayout swc is independent of Gumbo and doesn't require any Flex swcs to use.
http://opensource.adobe.com/wiki/display/tlf/Text+Layout+Framework
I apologize for that - we just don't have sufficient resources to keep that plugin working while doing CS5 development.
Richard
Similar Messages
-
3D annotation poster image: Retrieve poster from default view
Hello
I have developed a plugin whic embed 3D data into annotation.
In deactivated mode of 3D annotation i show annother image as appearance and it works great,My problem is i want show the poster image as snapshot of default view of 3D annotation the same way we have setting in propery page of 3D annotation. (Properties->Lauch settings ->Poster Image->Retrieve poster from default view).
How can i achieve this using c++ sdk ?You probably need to find some way to render offscreen and grab the bits or something. AFAIK, that's computed/rendered when you choose that and then embedded asa static image.
-
I just got my motherboard back from warranty (after 7 bloody weeks)...anyways i put it all together and the stupid thing wont post. There are no sounds whatsoever coming from the motherboard. I double checked all the connections and everything is in order. I know its not the power supply because its a brand new Antec case out of the box (see signature for details). All other components are operational and everything gets powered up but like i said no sounds at all (POST) can be heard from the motherboard.
Any ideas boys and girls????
If the case is that the motherboard is stuffed even though it just came back from warrant after being fixed, what is MSI's policy on things like this, because the warranty period just expired. This was the second time the mtherboard was being fixed by MSI rather than being replaced and both times it took them 7 weeks.
I'm open to suggestions....please advise.....thanksi got no accessories other than the components specified in the signature. Even if i had anything else connected there should be beeps generated by the board to suggest an error.
-
May web cam wont post pic?
my web cam wont post pics now?? Have a feeling my daughter did something???
Hello jennifer2000000,
Let's see if we can get your issue resolved. Before I can do that though I'll need to know what computer you have and if it has an internal webcam or an external webcam.
Where are you posting pictures to?
You said now, so am I wrong to assume that it used to work?
What operating system does your computer run?
Does the webcam work for video, but not stills or does video not work as well?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
1.8 bios wont POST, what can I do?
Well... it seems to me that the beta 1.81 bios is more stable than their final release. Now I don't know what to do. My computer wont POST. It just beeps continally until I turn it off. There are no patterns, its just one beep after another with about 1-2 seconds between beeps. Can anyone help?
Hi Guys n Dolls
heres another prob ive found with bios 1.8
after a successful flash in windows and reboot everything seams OK cept for a worrying message ... Checking NVRAM .. NO NVRAM
the new bios stole my NVRAM so now im scared to turn puter off in case it wont boot again .. lol
anyone else got this .. if so did your pc turn off and on again .. geeeeee what a nightmare
EDIT : well i got brave and switched pc off ... thankfully it restarted .. so not sure why it stole my NVRAM .. lol -
I just submitted my podcast, but the image wont show up.
This is what I have <itunes:image href="http://www.phstudios.com/podcast/PHSlogos.png" />
For some reason it wont show up, any suggestions?Heres my RSS
<?xml version="1.0" encoding="utf-8"?>
<rss xmlns:itunes="http://www.itunes.com/dtds/podcast 1.0.dtd" version="2.0">
<channel>
<title>PH Studios Video Series</title>
<link>http://www.phstudios.com</link>
<description>Video tutorials from PH Studios. There are 2 free versions of each series. For more episodes, head to http://www.phstudios.com and purchase a series pass for whichever topic you would like. These free episodes are also available in high resolution at PHStudios.</description>
<language>en us</language>
<copyright>PH Studios</copyright>
<itunes:author>Nathaniel Biefeld "Whiplash"</itunes:author>
<itunes:image href="http://www.phstudios.com/podcast/PHSlogos.png" />
<itunes:subtitle>Join Nathaniel Biefeld to learn programming, web design, windows tips and tricks, security help, and more!</itunes:subtitle>
<itunes:summary>Learn how to use the computer more efficently. PHStudio staff brings you a whole line-up of video series for your needs. These include the most common programming languages, web design, photoshop, and lots more! Every series will teach you something new, and the last 10 minutes, we will answer your questions! The first 2 episodes of every series will be free, but the rest wont be. For more information, head to http://www.phstudios.com </itunes:summary>
<itunes:keywords>phstudios, PHStudios, phstudios.com, PHStudios.com, programming, C#, C++, Java, web design, html, HTML, css, CSS, php, PHP, photoshop, signature design, website design, wallpaper design, windows, windows tips, windows tricks, security, tutorials, video tutorial</itunes:keywords>
<itunes:category text="Technology">
<itunes:category text="Software How-To" />
</itunes:category>
<itunes:explicit>no</itunes:explicit>
<itunes:owner>
<itunes:name>PH Studios Video Series</itunes:name>
<itunes:email>[email protected]</itunes:email>
</itunes:owner>
<item>
<title>C# Tutorial 1</title>
<link>http://www.phstudios.com/podcast/cstut1/cstut1.html</link>
<guid>cstut1.mov</guid>
<description>This tutorial explains what C# is, what object-oriented programming is, How programs work, class design, namespaces, and simple output. Hi-res version available at http://www.phstudios.com </description>
<pubDate>Mon, 8 Jan 2007 22:00:00 EST</pubDate>
<enclosure url="http://www.phstudios.com/podcast/cstut1/cstut1_media/cstut1.mov" length="193609236" type="video/quicktime" />
<itunes:author>Nathaniel Biefeld</itunes:author>
<itunes:subtitle>This tutorial explains what C# is, what object-oriented programming is, How programs work, class design, namespaces, and simple output. Hi-res version available at http://www.phstudios.com </itunes:subtitle>
<itunes:summary>This tutorial explains what C# is, what object-oriented programming is, How programs work, class design, namespaces, and simple output. Hi-res version available at http://www.phstudios.com </itunes:summary>
<itunes:duration>00:35:06</itunes:duration>
</item>
</channel>
</rss>
The podcast image wont work, keywords wont work, and its not on the tech listing. Only way to find it is if you search the exact title of it -
Hi,
I have filled the fields to show images on Parent Tab and Standard tab but images wont appear when running the page.
Thanks in advanced for the help.thanks for quick reply,
in the shared components section there is a link to manage Tabs, in the Image attributes part, both Parent Tab and Standard Tabs have the following fields:
Image, non current image, and image attributes
I filled all of them and no image is displayed on the tabs.
hope i got better explained.
thanks -
My computer wont post just 3 beeps pause 3 beeps nothing in board not even ram
please help took computer on plasne to alaska and now wont post just 3 beeps pause 3 beeps everything diaconnected from board already tried to clear c mos still 3 beeps no video help
Jim please go to your profile hear and post your specs under signature.
-
i have a 6712, that wont post
if i hook the power up all i get is the cpu fan to run for about a second, no beeps or anything
I have a 6712 that i built in the spring, i and think i had the same problem then, and got it to work, but i cant remember what i did?
Any help would be great
I have tired in the case and out of the case, reacts the same
ThanksThis might help....
How to assemble a KT4V from the ground up -
Please help 790GX G65 wont POST
Hi MSI community,
I have a brand new 790GX-G65 as part of my all new build and it wont POST.
here's the system
790GX-G65 - winki edition (winki not connected)
Phennom X4 965 Black (AM3 package, 3.4GHz)
Corsair 400W PSU
2*2GB Corsair Dominator DDR3 - p/n cmd4gx3m2b1600c8 , which according to the reseller's website is guaranteed to support all DDR3 platforms from AMD
using the onboard ATI RADEON 3300 via the vga socket
I have the board outside the chassis on a peice of cardboard
the 24 pin connector, 4pin connector, heatsink fan, CPU, ram, keyboard(tried PS2 and USB ones) and monitor are the only things connected.
I have tried using each ram stick individually in slot1, both together in slots 1 and 2 and no ram at all.
In each case when i start the system the fans come on, the reset and power buttons light up, the five blue LEDs in the top right corner come on NB1,LED2,LED3,LED4 first then LED1 a second or so later, but nothing else happens.
no beep codes(have tried with and without the system speaker connected), no signal to the monitor (tried several monitors)
I've tried clearing the CMOS several times.
it seems to me like its a dead chip or board but i cant truly rule out ram.
anyone have any thoughts or suggestions?
I will ask around to see if i can find another AM3 chip or board to test against but most of my friends went the intel route
many thanksHi Guys,
Thankyou all for replying, sadly though it still doesn't work :(
nt650
I could understand the psu struggling if i had load of othe things running off it, but it's just the board and chip.
I'm happy that its not the board shorting out on the cardboard.
I've tried it with a couple of old ATI rage IIs I had lying around and theres no joy from either of those. both known to work in other pcs
I'm using the standard AMD HSF so the clip on that shouldn't have caused a problem. I didn't need a hammer to fit it!
HDD is not connected
CMOS battery seems fine
paperclip test was fine, fan spun up immediately
Fredrik
I cant be sure what bios version i have, its a brand new board and i havn't flashed it so whatever it shipped with, v1.4 I guess. Are there any known issues?
Bas
I checked the pins again, all there and straight.
Hans
I'll try and lay my hands on a beefier PSU tomorrow, but with just chip and board it should run ok. I know it's near the bottom end of the recommended range but the PSU companies will always want to sell you more than you need.
One other thing I tried just for kicks was to start the board without the chip in at all,
the hsf still came on, the speaker still did nothing but only LED1 LED2 LED3 and LED4 came on, not NB1. I have no idea what (if anything) that means, but hopefullly someone on here does.
Anymore ideas out there? They would be gratefully received -
K8N NEO2 shut down/wont post
Long story short. I cleaned my case, put it back together. System ran for a few minutes then shut down. It did that a few times then all it would do was turn on for a few seconds. Now it wont post at all. Any ideas? Thanks. SIK.
put components out one by one until it posts
also try to swap memory/power supply/ cpu and see if it post again
I know it is a long and hard process but it is the most effective way of solving the problem. -
MSI DKA790GX wont POST |SPLIT
msi DKA790GX
PHENOM 11 X4 940BE
OCZ FATALITY 800MHZ 8GB
EVGA GTX 285
ANTEC 650 WATTS
2X WD 320GB RAID 0
I am having almost the same issue but if i turn the switch of to power supply then press the power switch on mainboard it will boot
if i try to restart from windows it will not post if i try to turn power on with switch on case (antec 900) lights come on alot of sound but will not post, unless i use switch on motherboard it will not post at first it was random but its getting worse i tried the new bios 1.9 no luck
it works great other than i have to use power switch on motherboard for boot up
temps are normal, i have reseat the cpu, memory power cables nothing ran tests after test it all seems fine but it wont post with windows restart or power switch on tower
Since both problems and fixing has to do with the power supply unit (PSU), I would check power connections. Perhaps try with another PSU, but it sounds like if some devices share the wrong power line. Antec PSUs usually come with a manual, have a look there for good distribution of the cables/connections.
Could also be traces - metal debris - in the motherboard, that creates power "jumping". -
MSI 785GTM-E45 wont post with 4 GB ram just about at witts end help please
I have a MSI 785GTM-E45 with a AMD Athlon 7750 Black Edition Dual Core 2.7 (all overclocking was restored to normal for install of new ram) that ive been putting together its just about done except vid card and memory.. K heres my problem I"ve been using a 1 X 1gb single channel ddr2 800 pc2 -5300 1.8v 240 pin to set stuff up untill i got my new ram. well i got my new ram today its 2 sticks 2 GB each PC2-8500 DDR2-1066Mhz ..CL 5-7-7-25 dimm when I install it on my board the machine wont post. seems like it boots theres no beeps or anything so i cleared the CMOS Flashed and upgraded the bios set bios to defaults still wont post. I tried one stick then other tried one slot then other nothing took it out put in my old ram fires right up. HELP what am i doing wrong. PC2-8500 DDR2-1066Mhz owners manual and everything i read online says this should work they are a new maching pair.
hey mark thanks i took it to a shop today guy said it was 100% compatible so i asked him to test it came back bout 5 min later said it was completely dead worthless so in sendin it back bout some from the guy at the store machine runs awsome now i just need a good inexpensinve graphics pci-e pretty sad when you spend good Money and a few days looking for excactly what you want / need and when you get it its trash im just glad it wasnt my main board
-
I just got a Max-C 645E Ms-6547e.
I had this problem with my ms-6529.
It wont boot into XP! I have a dual boot with 98SE and XP Pro. It boots into 98SE fine but gets to the Boot Screen of XP and I get a Blue screen error about Viruses and Newly installed HDDs. I know that isnt the problem. like I said my 6529 did the exact same thing
On the 6529 I changed the Modem/Audio settings and flashed the BIOS and it booted.
So I try it with this new POS. Flashed my bios with .31 and now it wont POST! The DLED sticks in "Early Chipset Initialization" and hangs there. Ive pulled the CMOS Battery AND jumped it to 2/3 position. At this point recovery isnt likely.
Need help. Ive been a loyal MSI user for a while now but am losing patience.
Thanks
AQuote
Originally posted by the_owl
I just got a Max-C 645E Ms-6547e.
I had this problem with my ms-6529.
It wont boot into XP! I have a dual boot with 98SE and XP Pro. It boots into 98SE fine but gets to the Boot Screen of XP and I get a Blue screen error about Viruses and Newly installed HDDs. I know that isnt the problem. like I said my 6529 did the exact same thing
On the 6529 I changed the Modem/Audio settings and flashed the BIOS and it booted.
So I try it with this new POS. Flashed my bios with .31 and now it wont POST! The DLED sticks in "Early Chipset Initialization" and hangs there. Ive pulled the CMOS Battery AND jumped it to 2/3 position. At this point recovery isnt likely.
Need help. Ive been a loyal MSI user for a while now but am losing patience.
Thanks
A
Its dead, u just flashed the wrong bios my fren -
Msi k8n neo 4 wont post, d bracket 2 red 2 off
hi, all of the sudden, the mouse stop working. i shut the pc down, power up again and after 10 sec in win xp desktop, the same happened.
but now it just wont post! black screen and nothing happens. try switching the 2 mem sticks, reseting bios with the button and removing the batery.
also, the d-bracket shows leds 2 and 3 in red, 1 and 4 are off...
thanks in advance, gabrielQuote from: Svet on 27-March-11, 06:28:26
this also could be the source of the issue,
use only matched memory sticks and either 1, 2 or 4 but not 3
right now are in slots 1-3, you say i should try them in 1-2, 1-4 or 2-4? anyway i've already try 512 in slot 1 only, 1gb in slot 1 only, and no ram at all but nothing changed..
[/quote]Quote from: Fredrik on 27-March-11, 08:22:11
A processer problem most likely. Is there a lot of dust?
no, just the usual. already remove it and installed again jus in case, same behaviour
Maybe you are looking for
-
IMovie can no longer import video from camcorder.
I have been using iMovie '09 with a Sony DCR-SR85 camcorder for over a year with no problems. Suddenly, I cannot import from the camera anymore. With the camera connected and the disk image mounted, I run iMovie and click on the camera import button.
-
I have a airport time capsule, an older airport extreme, and an older airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?
-
Numbers spreadsheet will not open in Windows 8 Metro
When I tap or double-tap on a Numbers for iCloud spreadsheet in Windows 8.1 using Internet Explorer in Metro mode, nothing happens. Other buttons work. Long-pressing brings up the contextual menu, and the items in that menu work. I can even change th
-
ITunes 11: iPad 3 not syncing
I upgraded to iTunes 11 yesterday and now I can't get back my iPad 3 to sync. It is being recognized and shows up in iTunes, but when I click the "Sync" button, it starts syncing, backs up okay but also quits in the middle of "Determining which Apps
-
After I set up share file system between my laptop with Vista and my desk top with XP I can no longer view imbedded images in my e-mails it doesn't matter if I use Gmail of Juno - Foxfire or Explore as browers . All of sudden the images of pictures o